There are various types of above ground pool drains available in the market. You can choose the one that can cater all your specific pooling needs. The good thing is that The above ground pool drains arrives almost completely assembled. The installation is very simple. However, you must follow the instructions as suggested by the manufacturer’s manual.
In order to install the above ground pool drains, all you have to do is just to one end of the 13ft. Once you are through with that, now you should clear hose to the round white cover drain. Now, take the other end and connect the same to the blue siphon pump. When you have connected the two ends properly, now is the time to Place the round white cover drain on top of the winter cover.
While doing so, Hold the blue siphon pump and white drain hose down below the level of the water on top of the cover, and squeeze the pump to start siphoning water. On the other hand, you can also use your vacuum system to drain your pool. All you have to do is just to place your vacuum plate over the skimmer basket. Now, connect enough hose to reach the bottom and run the pump to waste.
While doing so for above ground pool drains, try to find a way to seal the vacuum plate to the skimmer basket. This way, you should not have any problems. If pump loses prime, you can use your vacuum hose or water hoses to suck the water out.