An Easy Guide to Repair the Aquarium Pumps

The aquarium pumps are important equipment for a healthy aquarium. It is used to oxygenate the water and drive the filters. A good quality pump can last for many years, but small problems like excessive humming or rattling can arise. These problems are easy to repair which simply involves replacing the diaphragm of pump using a repair kit which is easily available at the pet shops. These simple steps can help an individual in repairing the pump.

  1. Before repairing the pump, pour all the water in a large bowl and put all the fish in it carefully.
  2. Switch off the pump and detach it from the tank cables.
  3. Remove the insulating cover of the pump. Check it carefully if there are any signs of damage like water or rust in the pump. If there is some major issue beyond the wear & tear of diaphragm, replace the pump as it can be a very potential hazard.
  4. One can purchase the repair kit according to the model of the aquarium pumps.
  5. The diaphragm of the pump looks like a plunger head or suction cup, which is affixed to a magnetic arm that shudders when the pump is switched on. Loosen the diaphragm from the attachment and push it off. Lightly hold the magnetic arm & take it out from its bracket.
  6. Drive a new magnetic section into the collection. Lightly place the diaphragm around the attachment and create an airtight seal.
  7. Change the cover at the bottom. Rearrange the motor and connect it to the aquarium cables. Switch it on again. Now, the pump should run properly.
  8. Pour the water again in the aquarium along with the fish.

These steps would really help in extending the life of the fish tank pumps when one repairs it carefully according to the instructions provided.

The aforementioned factors help to decide the most suitable pump such as Submersible water pumps, In-line water pumps, air pump, external motor pump, internal pump, etc. Submersible pumps can efficiently run underwater, frequently in the pump of a filtration system. On the other hand, In-line water pumps are mainly used outside water and are linked to an outlet and inlet hose.

There are a variety of aquarium pumping units available in the market; some serve multiple objectives while some are for specific purpose. Learning on how to choose the best depends upon responsible factors. One is required to keep them in mind before spending any money. Getting online help for selecting aquarium motors is a great idea and it saves both time and money.