Detecting Counterfeit Electronic Components Using Blacktop Marking Tests

When counterfeit electronic components first began surfacing it was often easy to spot them. The markings on the chip would be blatantly wrong such as the wrong logo for the company who supposedly made the product or a marking which would simply rub off. As the counterfeiters have gained sophistication, their fake components are harder to spot. Even checking the markings on the chip (Blacktop Markings) now requires rigorous testing procedures.

Counterfeit parts have become a significant concern in the electronic component industry. Sometimes these counterfeits are clones – attempts to copy the genuine parts. In other cases, the counterfeiters will re-mark a part. The counterfeiter will take a component created for a specific purpose and change the markings on part so it will appear to be another part.

Why does this matter? Electronic components are built to exact standards to perform highly specific jobs. These components then undergo rigorous testing to ensure they will perform as expect under all circumstances. You would not build an airplane with untested screws that almost fit. It is potentially more dangerous to use electronic components which are almost right.

The US military has developed detailed specifications for how to test components. These specifications have become the industry standard, used to test both military and non-military parts. The military standards are essential in determining the authenticity of components. Reputable electronic component testing firms adhere to those published specifications. Still, there are variations and proprietary approaches of how to implement those specs and maintain quality control during testing.

(Note: The following test is used as general example for the purposes of this article. Some specific steps and proprietary information has been omitted.)

Marking Permanency (Resistance to Solvents) Test:

The purpose of a Marking Permanency test is to verify that the parts when subjected to solvents will maintain their correct markings. Counterfeit parts often have new markings which are not permanent; they will dissolve when the solvents are properly applied. Also, the solvents will reveal evidence of previous markings which have been sanded off or otherwise replaced by the false markings.

Various Military Standard procedures are used which incorporate processes of working with several chemicals mixed appropriately and in detail is in accordance with the specifications. These chemicals consist of Aliphatic alcohol, mineral spirits, ethyl-benzene, organic solvents, de-ionized water, propylene glycol monomethyl either, or monoethanloamine.

Once properly mixed the components are submerged in a three phase process and analyzed in accordance with MIL-HBK-130 to uncover evidence of damage to the device and any specified markings which are missing in whole or in part, faded, smeared, blurred, or shifted (dislodged) to the extent that they cannot be readily identified from a distance of at least 15.0cm (6 inches) with normal room lighting and without the aid of magnification or with a viewer having a magnification no greater than 3X. In some cases, a strategic acetone wash will be used to reveal sanding marks and facets of previous markings.

Blacktop marking is just one test in a multi-step process used to discover counterfeit electronic components. Other tests include closely checking the physical dimensions and the packaging as well as the performance of the chips. Counterfeit electronic components are on the rise in both military and civilian products. As the counterfeiting gets more sophisticated, testing houses continue to develop finely tuned procedures to separate the fake goods from the real parts.