How many times have you watched a limousine being driven down the road and thought to yourself, "man that sure would be nice to own one". The cost of purchasing one because is the prohibitive factor for most people. There is an affordable option though and that is to turn the car you now own into a stretch limousine by following these simple easy to follow instructions.
Start Taking Your Car Apart
Your going to start by removing all of the interior paneling and seats, down to the point where the car is pretty much bare inside. Next, you will need to climb under your car and remove the drive line and any brake fluid lines that are running up the under carriage.
Cut Your Car in half
Also, you will want to remove any wiring that is running the length of your car both inside and out. Next, remove all of the side windows as well as the doors. Your next step will be to get a saws-all and a pack of new metal cutting blades and saw the car in half.
Head to the Wrecking Yard
Make sure that your cut line avoids any doors for simplicity. Have a friend help you to pull the two halves of your car apart and set them up on blocks. Now head to the wrecking yard and find a car just like yours that you can cut a midsection chunk from.
A Total of Six Doors!
Bring the chunk back and weld it in place. Now you have two extra doors in back, for a total of six doors in your car! Grind and sand down your welding seams, finish them off with bondo and then hit them with a good coat of primer paint.
Easy As Pie !!
Take your drive line to a machine shop, have it extended and start to put your limo back together. Some of your interior panels will fit and some will not, so you are going g to have to do some creative upholstery work. Your also going to need some extra long brake lines and an extended wiring harness. Hit the car with a paint job and you are good to go!