Overcoming Stuck Plumbing Fixtures

Solving plumbing problems yourself is usually the first step most home owners will take when plumbing mishaps occur. Professional plumbers have a number of tricks that they use to fix plumbing problems. Salt Lake City plumbers have the right training to fix major plumbing issues, and can also repair small leaks and problems that you may not feel up to fixing.

There are many different SLC plumbers to choose from when searching for Utah plumbers. If you are in need of a plumbing repair find a Salt Lake City plumber that has a good reputation for fair prices and fast results. One way to find a good Utah plumber is to ask neighbors or friends if they know of any good SLC plumbers in the area.

If the problem is not serious, however, having a basic knowledge of piping systems and plumbing can come in handy. If you are a do-it-yourself type of person, there are plenty of jobs that can be fixed with out the need of calling on a Utah plumber. There are certain jobs that should always be left to professional plumbers, however, so do not try to fix any major repairs on your own or you can cause even more damage.

When working on a plumbing project you may find yourself frustrated by a stuck fixture. There are a few techniques that many SLC plumbers use to remove stuck plumbing fixtures. Here are just a few things to try:

Begin by tightening the nut that is connected to the fixture. If the nut is able to move at all you may be able to then get it the move the opposite way and get it loose. If you are able to back it out the other way you can usually remove the fixture with little problem.

If that trick does not work try to jar it loose. You can do this with a center punch and hammer. Make sure you aim the center punch with the middle of the nuts sides and try to shake the nut free.

If this does not free the fixture apply some heat. Heat will make the nut expand and may be the ticket to loosening it. Use safety measures when heating the nut, and use your wrench to loosen the nut while it is still hot and expanded.

If all else fails you can always cut the nut and bolt. This can be done with a hacksaw. Cut through the threads of the bolt first, and continue on until you can break off the nut from the fixture.