Why Is There A Burning Smell From My Laptop Charger?

A burning smell from the adapter is a warning sign. It indicates that it either needs to be replaced or monitored from a closer angle. The smell of burning plastic from laptop chargers can be very dangerous and must be looked into immediately. When you smell something like that, you must disconnect the laptop power supply right away. If you fail to do so, you may just end up damaging your laptop. Unplug the charger from the AC/DC jack of a laptop before you go any further.

The smell of burning plastic can be due to the charger itself. You should pay special attention to the plastic insulation of the cables on laptop chargers. If you find any bare wires, you have found the spot where sparking took place and burnt the plastic around the wire. If you find nothing damaged along the plastic insulation of the cable, take a look at the tip. If you see melted plastic at the tip of the charger, it is a sure sign that something has really gone wrong. Such things usually take place when there is a short circuit connection between the tip of the charger and the socket of the laptop.

It is very important not to take any of these signs lightly. Ignoring these signs at an early stage can lead to potential risks later on. A laptop charger is an extremely important accessory that should work well at all times. If not, you shouldn’t hesitate to shell out some money to get it replaced by your laptop manufacturer or purchase the same model online.

A short circuit usually occurs when the power from the laptop adapter is obstructed on its way to the laptop. In other words, the electrical power does not flow smoothly all the way from the socket to the motherboard of the laptop. During this time, a lot of heat is generated. Overheating can quickly melt the insulation around a laptop charger cable or other plastic components near the tip of the charger. When this problem surfaces, you should immediately take your laptop adapter to a professional and get it checked.

While a professional can try to fix your laptop chargers for a small fee, you shouldn’t really rely on something that has failed you in the past. If anything goes wrong with the product again, it can cost you dearly. Safety should always be the number one priority for everyone. It is important not to keep using the same malfunctioning charger once again simply because it seems to be working fine at the moment.

Such a charger may continue to recharge your battery for a while, but can cause something really nasty like a fire or other accident after you use it continuously for a few hours. Instead of allowing such undesirable events to take place, just buy an original laptop charger from a reputed online seller of laptop chargers.

What To Look For Before Opening a Restaurant

If you're planning to own your very own restaurant then you are in for a very exciting ride. Owning a restaurant can be both rewarding and frustrating but it is always exciting. However, in order to ensure that you have the best chance to succeed, you need to make sure you do a few things.

Before opening a restaurant you want to make sure that you have everything you need to be successful. The two major things you need to be successful are a good mentor and a solid plan.

You may think you do not need a mentor but unless you've already opened and run a restaurant for five or six years, you do indeed need a mentor. A mentor should be someone who has opened and run one or more successful restaurants. A good mentor should be easy to talk to and be willing to help you every step along the way. All major decisions (and most minor ones too) should be run past your mentor.

You also need a plan with everything that you'll need for opening a restaurant clearly laid out. Your plan should include financing goals, sourcing requirements, operational guidelines, hiring goals, margin levels, a clear-cut budget, and innovative approaches to make more money. All these things should be carefully worked out and then implemented as you move forward.

You want and need to be as specific as possible with your plan. For example, if you have a meal that is popular, you'd better make sure that the ingredients from the meal have more than one way to get to your restaurant. You want to have a main supplier and then at least one back-up supplier. That way if something happens with your first supplier, you can just get the necessary ingredients from the second supplier. Then you will not have to miss out on the money and you will not anger any customers by taking the popular food off the menu for a day or longer.

Speaking of food, food waste will cost you a lot of money if you do not handle the food properly. Make sure you have a method set-up that will use the oldest foods first – first in, first out. You also want to make sure you have a way of storing the food properly and that you do not buy so much food that you're unable to use most of it before it becomes waste and costs you money.

If you're opening a restaurant then you have an exciting road ahead of you. It will be a road filled with good times and bad times. To help yourself have many more good times than bad times, you need to plan for opening your restaurant and then running your restaurant after that. This plan needs to be thorough and very specific. Also, before opening a restaurant you need to find a good mentor who will help you each step along the way. With a good plan and a good mentor, you will have a much better chance to be successful with the opening and running of your restaurant.

Dangers and Disadvantages of the LED Grow Light

LED lights have slowly outdone most of the other light bulb competitors in the market. These include incandescent lights, fluorescent lights as well as halogen lights. LED stands for “light – emitting diode”. Although these lights have won most people over, there might be disadvantages to these seemingly perfect technologically advanced lights.

Firstly, there are more expensive as a one-off payment. If you will only be able to use them for a shorter period, then the cost would not be as worthwhile as either halogen light bulbs of fluorescent bulbs. LED grow bulbs can deteriorate in extreme temperatures and are not as flexible enough to be able to be used where dimming switches are placed.

LED grow illumination bulbs mainly produce blue light even though the first LED grow bulbs that were manufactured emitting green and red light wavelengths. Blue light emitted from the bulb has a longer wavelength. To the human eye, it appears much brighter compared with the other colour wavelengths. The wavelength should not be shone in the eye or be used often at night because it can be either distracting or blinding for your eyes even if you might not feel any effects. There has been much controversy over the issues known as “blue – light hazard” because there has been some scientific evidence that the blue light emitted from LED lights can be harmful and damaging to the eyes in the long term.

The eye itself responds very efficiently to the blue bulb emitted from LED bulbs and have previously caused corneal complications in some individuals. Due to the fact that the eye responds so efficiently to the blue buld, the eye becomes quickly fatigued. If the eye continues to be exposed to the bulb for a long period, it can cause eyestrain and even mild to severe headaches.

Another effect that blue LED grow light can cause to the human body is disrupt normal sleeping patterns. When the eye is exposed to the blue wavelength light, the body reacts to it as if it were natural light. If the blue LED grow light is used too often especially at night is has the potential to create sleeping disorders.

Certain LED lights produce UV and infrared light in addition to the blue light. Although the human eye cannot visibly see UV or infrared light, they are both dangerous. Ultraviolet light can cause damage to not only the eyes but skin as well. This type of LED grow light should only be used under control environments for scientific purposes or procedures. Infrared light can easily damage nearby electronic or at least lessen the usage of the electronics.

The Benefits of Using LED Aquarium Lighting

Aquariums have remained highly popular in a lot of homes since keeping fish and other aquatic animals are fairly easy to maintain, as compared with having house pets such as dogs or cats. Avid aquarium hobbyists make sure that their fish are kept in excellent condition by keeping their fish tanks equipped with various features such as filters and oxygen tanks. Another important feature that is usually overlooked by some fish keepers is aquarium lighting which helps in providing energy to the organisms living inside the tank. Keeping your aquarium adequately illuminated is truly important since it aids in the photosynthetic mechanisms of aquatic plants, and is beneficial for the overall health and well-being of the aquarium fish. There are a number of different types of LED lighting for aquarium, but one of the more popular ones is LED aquarium lighting.

For those who are not yet familiar with this type of lighting, LED stands for Light Emitting Diode, which is the main component of this fixture. It was initially introduced as supplementary night lighting for fish tanks since light produced by LED bulbs were not that intense to properly illuminate tanks throughout the day. But with the improvement of LED technology, the intensity of the illumination of LED lights sufficiently increased, and LED lighting for aquarium eventually became a popular choice for aquarium light. More and more hobbyists choose LED lighting since most aquarium freshwater plants, corals, and fish thrive with LED illumination.

Moreover, there are a number of advantages of using LED aquarium lights. LED bulbs run at very low wattage so this type of lighting is very cost efficient and can lower your monthly electricity bill. And despite using low wattage and being energy efficient, LED bulbs still produce intense illumination like other forms of aquarium lighting. Also, these LED bulbs produce powerful illumination with a low amount of heat released compared to other types of lighting since they are equipped with fans and heat sinks to lessen the dispersal of heat within the aquarium.

LED bulbs are also very flexible since they can be adjusted to a dimmed illumination depending on the most suitable level for the fish and plants within the tank. Other forms of aquarium lighting are not as adjustable and versatile since they can only produce illumination as to what is specified in their fixtures. Another benefit of using LED lighting is that they do not produce UV radiation unlike other forms of lighting. In addition, LED bulbs produce a wider light spectrum which means that they can illuminate aquariums with a wider depth. Furthermore, LED for aquarium are extremely flexible since they can be installed in a number of different ways and can be placed in different locations within the fish tank.

LED aquarium lighting has truly become the leading choice for illuminating aquariums. Although some units can initially be expensive, LED lights eventually prove to be a wise choice since they use lower energy and offer a greater flexibility as compared to other forms of aquarium lighting.

Radiant Barrier Installation For DIY'ers

Basics of Radiant Barrier Installation –

Always start with checking the labels and recommendations from the manufacturer. Its also good to check over the area in the attic for any existing problems including moisture, holes in your roof, damaged electrical wiring, missing or damaged insulation, anything else that looks out of place, etc. If you find a problem you are not sure you can fix on your own you want a qualified professional who can. The installation process is fairly simple.

First measure out the area you are going to cover, cut out the amount of material making sure to add a little extra at each end, roll it back up, take it up to the attic for installation, and then lay out over the desired coverage area. Repeat until finished.

During installation be careful not to cover any pipes or vents, fans or any kind of equipment that produces heat. HVAC (heating & a / c) vents and ducts are OK to cover. This will actually help keep the cool and hot areas separated. During a hot season the ducts and vents will remain in the cooler area of ​​the roof protected, and in winter the heat will be separate form the cooler areas making the heating unit more efficient.

Lay the material in line with the beams of the attic floor. Do not worry about stapling down or taping pieces together; simply overlap each piece over the last one installed.

Do not rest or store objects on top of the heat barrier; the heat reflecting capability will be reduced. The thermal barrier that you purchase must be a perforated type so you do not have moisture condensation problems. If your radiant barrier is not perforated, send it back right away to avoid moisture problems.

5 Good Reasons to Own Gun Safes

If you’re a brand new firearm owner you might be wondering why it is important to own a gun safe. Gun safes are usually expensive and bulky pieces of equipment that don’t seem to serve much purpose other than to keep your guns in an enclosed area. You might not feel the need to spend all of your hard earned money on something that is just going to keep you away from your new gun but let me tell you this: they are a necessity.

Here are five reasons I believe every gun owner should have at least one good gun safe in their home. You can’t keep your handgun under your pillow or in your nightstand forever, these things are dangerous weapons and shouldn’t be strewn about a household like a lazy cat. You’re liable to accidentally blow your hand off if you keep it up that way.

1. Keep Your Children Safe

If you own a gun and you have children you are in constant risk of them discovering your firearms and accidentally injuring themselves. You don’t want to have your child’s blood on your hands.

You can keep all of your guns in the gun safe and only you will know the access code to it. Your three year old won’t be able to stumble upon your weapon and do harm because it will be safely locked away. Your teenager won’t be able to show his friends Dad’s cool gun because he won’t be able to unlock the safe without your permission.

Save yourself from troublesome curious children, buy a gun safe.

2. You Will Be Safe From Theft

The great thing about gun safes is that not only do they keep people from getting in, they prevent thieves from taking your guns out. If I didn’t have a gun safe my weapons collection would have surely been stolen last Christmas when my house was broken into. Don’t let that happen to you, get a gun safe and get some piece of mind. No one will steal your guns.

3. Don’t worry about fire damage

You might be thinking: Okay well that’s well and good but what if a force of nature destroys my home. Won’t my guns be ruined then? Not if you own a gun safe. If you store your weapons in a fireproof gun safe they will be safe from intense heat. Most of them can last quite some time in severe temperatures.

4. Keep Other Valuable Safe

You don’t even have to own a gun to get a safe. You can store all of your other precious valuables in these secure boxes as well. All of the previous benefits apply.

5. Gun Safes Can Look Good Too

Gun safes provide that extra protection from life’s little hassles but a lot of them these days are being designed with aesthetics in mind. You can get some very nice looking gun safes that have glossy finishes and game embroideries on them. You can find a gun safe that will look good in any room of your house if you look hard enough these days.

There is really just no excuse not to own a safe if you own a gun. Play it safe and keep your guns locked up until you need to use them. That’s the best way to avoid accidents and it will keep your gun collection safe from harm.

Free Online Debt Consolidation Quote – An Aid In Choosing An Ideal Debt Help Program

Debt consolidation services that are provided online are one of the easiest and most effective ways to acquire a consolidated loan for debit elimination. Many companies offer a consolidation loans to help the borrower in selecting the right option for his consolidated loan. Online quotes offered accommodate the needs of individuals working toward unifying several loans into a combined whole with more affordable rates of interest. These quotations help in comparing the offers of various lenders and deciding the best among them. The primary objective to keep in mind while undertaking liability reduction should be to decrease the total costs.

Points To Be Aware Of While Undertaking Consolidation Of Debts

The process is initiated by filling up an online form and then waiting for the response from the lenders. Various search engines may be utilized to locate the numerous lenders. Numerous firms offering free help may also be located with the help of these search engines. One of the useful methods used to verify the authenticity of these firms is to ensure that they provide you a free quote. Almost all genuine companies provide you with a quote for their services. This is generally done after examining the paperwork that you possess in the form of income slips, bills, credit history and so on.

Consolidation On Credit Card Bills

Consolidation for credit cards debt refers to the merging of all your outstanding credit card bills into a single outstanding loan. The payment on the consolidated loan is normally lesser than the combined payment on all your outstanding balances. The average interest rate is also generally lower than the combined rates to be paid earlier. A quote may be acquired for consolidation of credit card loans as well. A fair amount of counseling is also offered to help you to alter your lifestyle and spending habits in order to enable you to live within your financial means.

Transferring the balances from the various credit cards onto a new low interest card is one of the easiest ways for debit reduction on your cards. However, while consolidating your credit card debits, it is important to select a card, which has a low APR on balance transfers for the consolidation to be effective. The other method of consolidation is by borrowing the required amount from a trusted person who can be paid back at regular intervals and in regular installments.

9 Simple Tailgating Tips for Beginners that Will Make You Feel Like a Pro

Many people nowadays are getting interested in tailgating. If you haven’t tried ir and you want to throw a successful tailgating party that no one will ever forget, then this article is for you.

Here are 9 things you need to consider as a beginner in tailgating:

1. Before having a party, be sure that you have already packed up the things you need. Assess all the things you need like chairs, tables, trash bags and other things that you think you might need and pack them into your vehicle. Make sure also that you are ready with the foods that you will be bringing. You should learn the proper way of packing the foods. The last food to be packed must be the first one to use. Being prepared will ensure a smooth running tailgate party, an essential aspect for any party.

2. Checking the location where you are planning to do your tailgating should be done a day before you plan to party. Make sure that you have the correct space for a big party.

3. Filling up your propane tanks for cooking should be the one thing you should never forget. Do not just assume that it is full, instead you should go and check it out and see for yourself.

4. Separating your raw meats and your ready-to-eat foods and beverages should be observed. You should have a separate cooler for each of them in order to avoid bad smells and spoiling the food.

5. It is more advisable to the beginners to have freeze-bottled water or drinks to be use for cooling rather than putting loose ice. In this way, you can observe cleanliness and orderliness while tailgating. There will be no water scattering on the floor because of the loose and melted ice.

6. Fly flags, balloons or anything that can be use for recognition in order for your guests to have an easy way in locating you.

7. Food should always be ready so that anytime your guests or participants wants to eat, you are ready and you will not be panickingto cook to order.

8. After grilling, you should remove the ashes and keep them in a heavy-duty foil and dip them completely in water before allowing it to be placed in a container which is non-combustible in order to observe cleanliness.

9. Lastly, remember that after the party is over, you should clean up your own mess. Bring plenty of trash bags and recycling bags to be able to dispose all your garbage cans and bottles. Put everything in its proper places.

By doing all of these things, you can consider yourself as one of the pros in tailgating.

Acoustical Ceilings – Tiles and Ratings

Acoustical Ceilings are an inexpensive way to lower the height of a room and also soften noise in the room. However, reduction of noise isn’t the only reason to use an acoustic ceiling in an office environment. It can also be used to hide computer wires, pipes or other things you would rather not see.

If your reading this in an office you may be under an acoustic ceiling right now and not even have know it. Usually you can tell one of these ceilings by the square tiles and popcorn like texture. But, no longer are they only available in that texture they now come in plenty of styles and colors for the average person to feel comfortable bringing them into their home or business.

The Underwriters Laboratories created six different ratings for sound absorption and you should take them into consideration when choosing your acoustical ceiling tile. The rating can be found on the box label with the symbol UL next to it.

First is the “Noise Reduction Coefficient” (NRC) which is a rating of the sound absorption of the tile in an enclosed space. This would be important for an office or the customer contact area of a store such as a checkout line.

The measure of speech noise reflected around office fixtures and wall partitions, such as a cubicle is called the Articulation Class (AC) and should be taken into consideration in a cubicle area.

Sabin is a sound absorption measurement for within a design space and is mainly important in more open areas.

Ceiling Attenuation Class (CAC) gives us the measure of airborne sound absorbed through the ceiling tile and is rating needed for interior designers of doctor offices.

PI or Privacy Index is used to rate the amount of privacy provided by the ceiling tile. It is determined by if PI is greater than 95% you can feel comfortable speaking confidently between 80% and 95% you would have basic privacy where someone would have to be listening to understand and less than 80% is considered poor in terms of privacy.

The Sound Transmission Class (STC) gives us the rating of the barrier to sound created by a wall, between floors or other partition. A STC rating of 55 or above is considered a great barrier of sound.

Inside your home or office they can be used for quick fix on that room you don’t feel the best about or to quite down a child’s play area. There are a few “Do it yourself” websites out there but when it comes to anything requiring this type of work you should hire a commercial contractor.

What’s the Best Flooring If You Have Pets?

It’s a question many consumers ask. The answers you may find on the web will range across the full spectrum of flooring options. When considering what the best flooring options are with pets, you have to consider both scratches and moisture (because of pet accidents and spills). There are several good options to consider if you have indoor pets, including large dogs.

In my opinion, the best overall choices for floors if you have pets are luxury vinyl tiles or planks. The newer products available really do a good job of simulating the natural look of tile and wood. With registered embossing (you can both see and feel the wood grains and characteristics of slate, stone, tile etc) these look great. These have several advantages over other flooring types. One advantage is the durability. It is extremely hard to scratch or scuff luxury vinyl tiles and planks. They compare very well to laminate and real tile when it comes to scratches. These are also inherently water proof so pet urine doesn’t cause any issues with the construction of the products material. Also, they will not absorb the smells left behind from pet odors and accidents. When it comes to floors for pets, luxury vinyl meets all the criteria needed for a perfect floor. Some major manufacturers of luxury vinyl tiles and planks are Karndean, Nafco, Earthwerks, and Konnecto.

Another solid choice is natural tile. Whether it is ceramic, slate, stone or marble, these natural tiles are very hard to scratch. Ceramic and other naturals can be very hard to stain if the sealant is properly applied and in good condition. If the sealing is not up to par, you can get some staining and odors could be absorbed into the tile however. Minor water bowl spills shouldn’t affect natural tile flooring at all. Not only does natural tile hold up well overall, it looks great and adds value to your home. These reasons make it another good option for flooring if you have pets.

A third choice would be traditional, resilient vinyl flooring. It holds up adequately for scratches if you go with a higher end product. The lower end vinyl ranges may show scratches over time however. Most roll good vinyl materials will do well with most stains. The drawback to traditional vinyl is the look itself. Many consumers just don’t like the look. Functionally it should be fine, but it is your kitchen, bathroom, living room etc so you better like the look of the floor.

Laminate floors have been long promoted as a good option if you have large pets, such as dogs. When it comes to a pet’s feet and nails, laminate will do great for scratches. Laminate is pretty tough stuff on the surface. The slight drawback on laminate is any moisture or water left standing on it can creep into the joints and cause major issues. Laminate floors hate water period. Even if you buy the high end products, water is a killer. A few months of Fido peeing on the floor will more than likely cause buckling issues at the joints.

When it comes to hardwood floors, I really encourage consumers to stay away if you have large pets. It really doesn’t matter if the floor is a factory prefinished or custom in home finished (unfinished). Even the superior factory finishes with aluminum oxide can scratch over time. Sure you can have the floors refinished every few years, but that is a major expense and hassle to boot. Unless you’re willing to go through the pain and money to have floors refinished every so often I would stay away from hardwood floors if you have large dogs or other pets.

Carpet is in a similar category as hardwood but for a different reason. As long as you don’t have a loop product like a Berber (nails can hang on the loops and cause damage to the carpet), the carpet itself will hold up to the traffic. Unfortunately, carpet is easily stained and will hold odors, even with professional cleaning. Carpet and pet accidents are a combination that doesn’t have a positive outcome.

Closing Your Inground Pool

Owning a pool is great; you can enjoy it all summer, have parties, invite friends over, splash and laugh, but like all good things, inground pool season too must come to an end. If you are lucky enough to live in a climate where you can enjoy your pool year round, that’s great, but for the rest of us who face the inevitable winterizing of the pool, it is best to do it right the first time so that it gets through the cold weather months unscathed and is ready to go next season.

The first step to closing the pool is to find all of the winterizing accessories. This of course includes the cover, but also things like water tubes, plugs for the skimmer and return water jets and of course the chemicals you will need for the remaining water and also an air compressor or a powerful shop vac.

Now you are ready to winterize. Go ahead and backwash the filter to clean it out. Next you will disconnect the pump and the filter and make sure they are both free of water. You can use the air compressor to blow any excess water out of all tubes. Any plugs that you take off you’ll need again come spring so make sure you put them in a safe place!

The next step is to remove all return jet fittings and to unscrew any fittings on your pump and filter system. If there is no water in any fittings or pipes it cannot freeze during the winter, which will mean your pipes won’t expand and crack. At this time you should take all of your skimmer baskets out as well. Blow out all return lines with your air compressor of shop vac, remember, you want minimal water to remain in those lines through the winter.

After you have removed all floats, ropes, diving boards and ladders from the pool, you will want to put duct tape over all exposed pipes to prevent anything from getting in. The last step is to mix your winterizing chemicals and put them into the water, put on your cover and you’re good to go!

Of course this is just a quick guide, more can be found in the manual from your specific pool manufacturer. Is is good to keep in mind though that all the work you put in now will mean a great pool come spring when you open it again to enjoy.

TPM and Lean Production, is It Worth the Effort?

The young production manager speaks enthusiastically to the top management team. He has just returned to the plant after attending an inspiring seminar and now he is convinced that they need to do something.

"We should implement Lean Production and TPM in our plant", he says. "This will make our production more reliable and increase our delivery accuracy".

The MD is paying attention but is not yet convinced. He wants to put the ideas to a test.

"Looks interesting", he says, "Please come back with a good calculation of the Return on Investment so that we can see if it fits into next year's budget."

This is where the story might end. How could you possible estimate costs and benefits from such advanced management techniques as TPM and Lean Production? These concepts are known to be difficult to plan in advance, and they require a mind-shift for everybody in the facility.

Well, it may be difficult but you have to do the calculation anyway. Arguments as "we have to do this" or "everybody else is doing it" are just not convincing enough.

A change project must be looked upon as an investment that will come with initial costs and hopefully bring something back in return. This is no different from any other investments. If you can not give an educated guess on its financial impact, there is a big risk that the project might not be given the necessary resources for what it needs to succeed. Even if the financial impact of important factors such as shorter lead times and better delivery accuracy are not known, we need to describe how this project will raise profits in the company.

To give an answer to these important questions we have put together some simple guidelines for you to use, and if you prefer, a free calculation tool that you may use to do your own estimations.

What will the costs be?

The main cost will consist of:

Training and Consultancy

No successful implementation of TPM and Lean Production has succeeded without the help of experienced professionals. You will have to train your employees and you need support in your project team. A good estimation is a yearly cost of $ 100.000 per 100 employees involved

Increased initial maintenance costs

Elimination of manufacturing wastes and implementation of improvement ideas are likely to increase the maintenance costs. Expect maintenance to increase up to 20% the first year, but with it stabilizing at a level less than today after one to two years.

Project team members

You will need people to run the project. Project management and coaching equals to about one full-time coordinator per 100 employees in the facility

Benefits

Increased Overall Equipment Efficiency (OEE) is the main factor that may be used to approximate the return on the efforts. Simply speaking, the OEE is the ratio of the facility's actual output compared to the theoretical output that would be possible if the machinery was run at full speed every minute, without break-downs, lack of raw material, quality losses or set-ups. As the OEE-ratio is a direct reflection of your plant's capacity, it may be used to calculate the future productivity after improvements.

An example: A plant produces 10,000 units per year with an OEE-ratio of 50 percent. After improvement, the project team estimates that it will be possible to reach an OEE-ratio of 80 percent. This means that they will be capable to produce

10,000 * 80/50 = 16000

units in the same facility without investments and with the same manning as before.

Can the increased capacity be used to increase sales?

One important question is if there is a market for expansion. If so, the increased capacity may be used for increased sales. It is common that the company's market share might grow after implementing TPM or Lean Production. This is possible as improved delivery accuracy and shorter lead times make more sales possible even if the market is stagnant.

If expansion is not considered possible, the increased capacity may instead be used to lower the production costs. This is possible through

– Less overtime

– Fewer shifts

– Fewer parallel production lines maintained and operated

The direct labor costs for production will therefore decrease as the OEE-ratio increases.

Your present and future OEE-ratio

Do you know your plant's present OEE-ratio? If so, is it accurately calculated? Often we see that some downtimes are deducted when OEE is calculated. This might be stops for planned maintenance, set-up times, and lack of personnel. The end result will be an OEE-ratio that looks better than reality.

If you do not know your present OEE-ratio, the easiest way to determine it is to use the free OEE – calculator at wcm.nu.

Then estimate what you consider a possible OEE-ratio after improvements. World Class companies reach 80-95% OEE, what is a realistic level for you?

Use the present and future OEE to calculate the future benefits. If you do not want to do the calculations by hand, try instead the free TPM and Lean – calculator at wcm.nu.

Et voilà! You have your Return on Investment calculation to present to your stake-holders!

The Dangers of Potholes

Everyone has experienced the surprising jolt when a car rolls over a pothole, but the full extent of the damage that can be acquired from these road hazards is rarely considered. Potholes occur when extreme shifts in weather patterns leave the ground unstable and prone to splitting. The wear and tear of regular traffic can make them worse, and occasionally they can become so deep that unsuspecting drivers can lose control of their vehicles after passing over a pothole.

Municipal agencies are responsible for maintaining safe roadways and the presence of a pothole large enough to cause car damage or collisions may be grounds for legal action against these agencies. If you have experienced significant vehicle damage or if you have been injured, contact an auto accident lawyer to discuss your options for financial compensation.

Most potholes are only an inch or two deep and perhaps a few wide, but some can be deep enough to catch a tire and cause damage to the vehicle or force the car to spin away from the road. Aside from the dangers of a collision, potholes can also wear out tires and force them to become misaligned. This can make the vehicle more difficult to control even on smooth pavement and force the steering components of the car to shift. Potholes also force premature break down of the suspension system and shock absorbers. In very extreme situations, the undercarriage or engine can be harmed after driving over a pothole.

Municipal agencies that overlook such problems can be held responsible for the damage incurred from these hazards. Though many are not large enough to cause significant harm, the longer they are ignored, the more likely they are to put someone in danger.

You have been the if the victim of an auto accident Because of a Pothole, contact the Des Moines municipal negligence attorneys of La Marca & Landry, PC, to speak to one 's of hwy qualified lawyers about your legal – rights.

The Bridge In Pool And Billiards

In pool and billiards, the bridge is what supports the cue shaft when taking a shot. It’s important to have a good, solid bridge to ensure that the cue tip doesn’t have any sideways movement that will adversely affect your aim.

There are several types of bridge – open, closed, rail, and what I call the over-the-ball bridge. For shots on the table that you have trouble reaching, there is also the mechanical bridge.

The easiest bridge to use, and probably the most popular, is the open bridge. This is formed by laying the bridge hand on the table with the fingers spread, pulling the four fingers back to form an arch with the knuckles in the air, and tucking the thumb up against the index finger. The cue shaft is supported by the “V” between the index finger and thumb. The height of the cue tip to the cue ball can be adjusted by raising or lowering the arch of the hand.

The closed bridge provides a more secure grip on the cue shaft and is preferred by more advanced players. This bridge is formed in a similar way to the open bridge, with the difference being that the tip of the index finger and the tip of the thumb are held together to form a circle or loop. Some shooters hold the fingers tip to tip, while others will overlap the thumb nail with the index finger. The cue shaft is held in this loop, and the index finger and thumb are squeezed around the shaft to support it securely, as the shaft slides through when shooting.

The rail bridge is used when the cue ball is so close to the rail that there is no room to place the bridge hand on the table. The bridge hand is held a couple inches over the rail and the tips of the index and middle fingers are placed on the rail, the width of the cue shaft apart. The thumb is tucked up out of the way. The cue shaft is place directly on the rail between the two fingers and the stick is stroked in this manner.

When the cue ball is touching or very close to another ball, it may not be possible to use the open or closed bridge. This is when the over-the-ball bridge is used.

This bridge is very similar to the open bridge, except that the palm of the hand is raised up off the table. This raises the “V” of the bridge that supports the cue shaft. The thumb is tucked up higher next to the index finger knuckle instead of along the shaft portion of the index finger. With the “V” higher, you are able to reach over a ball that may be in the way of the cue ball, and contact it with the cue tip to make the shot.

Whichever of the three bridge types you use, it is important to spread out the fingers that are touching the table as wide as possible, to provide the maximum support and stability to the bridge. The bridge must not move at all when taking a shot as this will negatively affect your aim and result in missed shots.

The mechanical bridge is made of plastic or aluminum and attaches to a spare cue stick. This device allows you to position the bridge near the cue ball when it is not possible to reach the cue ball to shoot in the normal manner. It features grooves that are made to hold the cue shaft as it is stroked for the shot.

Assemble Products at Home

Assemble products at home jobs are becoming more and more popular nowadays. Because of its growing number of products that are offered for interested people to assemble at home, a lot of people like housewives, the unemployed, students and even the disabled are now earning money through assembling different kinds of products at home.

You might not believe it but a deaf and mute person who knows how to read and follow instructions is one of the newest assemble products at home worker. We came to know this because he wrote us himself thanking us and the business he is now connected for the opportunity that was given to him when he was allowed to assemble products at home even when he told them of his condition.

The company accepted him as one of its assemble products at home worker because although he is mute and deaf, he knows how to read and how to follow instructions to the letter. He is now very happy with his work since the company treats him as a regular worker without any impairment. He uses his cell phone to communicate with the company he works with through text.

He told us that with the work he has now, he feels that he is now a man without physical limitation since he can even share his ideas to the company that he works with. In fact he told us that even he was just a new comer to the business, he already made a good mark in his work by suggesting an idea to the company that he believes can make it save more in terms of materials used in the assembly process.

Actually, as of late, we did hear that this deaf and mute assemble products at home worker was awarded by the company he was working with a hefty bonus for his suggestion that made the company saved money – from a new comer at that. Indeed, there are many heart warming stories that we were able to receive from thankful assemble products at home worker across the nation.

We do hope that through our efforts, we can at least share in providing some solutions to the growing numbers of the unemployed. We are now embarking on a planned increase in the publication of our offline directory and the list that we have now has just been updated to include those companies who have confirmed their agreement for the inclusion of their business in our updated list of directory.

More businesses actually are coming in but we are still in the process of screening them to weed out those companies who have bad records in terms of paying their workers justly and promptly. We do business only with companies whom we are sure can give their assemble products at home workers a fair and just pay for the labors, and promptly at that.