Take a Look Into Home Craft Assembly

Home craft assembly will not make you an instant millionaire, but it can provide you with a way that can help you earn added income. If you are looking for a company that can make you a millionaire, then maybe this is not for you. If you find a legitimate assembly company that you want to work for, they will send you started pack without ask anything from you.

Beware of companies that ask you for upfront cost to get started. If you encounter one of these companies, then you have just seen one of the many scam companies that offer home assembly products. These companies are all over the internet ready to take advantage of people who are desperate and looking for ways to earn extra money. So please beware and very careful.

Here's is the set up to watch out for, if you apply for a company that is a scam, you will be warmly welcomed as a delicious prey. Regardless of your experience, you will be accepted as long as you are willing to pay an amount to receive a starter pack that promised to make you a lot of money. A real home craft assembly will hire you because they know you have experience in making crafts. They will also send you a free sample pack for you to do so they can access your skills without requiring you to pay for any materials.

Real home craft assembly will directly tell you if there is an opening for new employees, but scam companies will tell you do that there are just number of spot that are still available and if you will join now you will not be hired. Take this advice and be careful.

3 Types of TV Wall Mounting Brackets For Your Flat Screen

If you would like to mount your flatscreen TV to a wall, you will need to purchase a TV wall mounting bracket. There is a little bit to know about the types of TV wall mounting brackets, so read about them and then decide which option works best for you.

There are three basic types of TV wall mounting brackets:

· Low Profile – the most budget friendly choice, and easiest to install; however, there is no range of motion at all, because your TV is affixed closely to the wall. If you need to have access to cables or wiring, this can be very inconvenient and will probably involve you removing the TV from the wall to access the back of it.

· Tilting wall mount – slightly more expensive than a low profile TV wall mount bracket; however, it allows vertical range of motion. You can also access cabling and wires on the back of your flatscreen easily, if needed.

· Full motion wall mount – as the name implies, this TV wall mounting bracket allows full range of motion of your TV. You can move it out from the wall, from side to side and up and down. If you need to move your TV around often, this is most likely the best choice. The drawbacks are that it is certainly the most expensive option and the installation procedure is a lot more complex because there are many moving parts.

If you are not sure where you want your TV mounted, try using a piece of cardboard representative of the size of your TV. You can easily tape it to the wall and see how it looks without drilling holes in the wall needlessly. If you want to mount your TV over your fireplace, double check how much heat escapes upwards where your TV will be located. Heat can damage a TV, and this is the last thing you want to do. If you are determined to hang your TV over your fireplace regardless of the heat, you may want to consider installing a heat shield that will deflect the heat from your TV and redirect it away from the unit.

Your new flatscreen is an investment, and you probably paid a fair bit of money for it, so you want to ensure that it is mounted correctly and securely to the wall with absolutely no chance of falling off. You will enjoy your flatscreen for many years to come.

Review – Hammer Nutrition HEED and Pepeteum Energy Drinks

Hammer Nutrition is aimed at serious endurance athletes. As a company they are super nerdy, rather than marketing driven. You will not find their drinks in the cooler at a variety store. They make their products for cyclists, triathletes and runner who are driven to perform at their maximum. There website has a lot of good information about the science of fueling for endurance events.

They make two energy drink mixes. HEED (High Energy Electrolyte Drink) is designed for training and racing of two hours or less, while Perpeteum is aimed at longer events. How do they taste and do they do the job?

Hammer Nutrition HEED (High Energy Electrolyte Drink )

Hammer Nutrition HEED has a light flavor that leave me with the chalky after taste that high sugar drinks do. In the heat it's thirst quenching so I tend to drink more, helping stave off dehydration. I find if you do not like the drink then you do not drink enough. The energy source in HEED is maltodextrin which I find to be the easiest on the stomach out of the different carb sources available. I do not get the gut rot feeling that often accompanies the more popular commercial energy drinks. As you get some calories with every drink, the energy is very even without spikes that can come from high sugar energy drinks. In addition to the carbs, HEED has a full spectrum electrolyte mix that will help the body absorb fluid and help reduce the chances of muscle cramps. For really hot weather or if you sweat a lot you will still need extra electrolytes on longer rides. I add Hammer Nutrition Enduralyte powder to my bottles to customize the electrolyte load as I sweat a lot and it's very salty so I'm losing a larger percentage of electrolytes. At around 100 calories per serving (suggested to be mixed with 500-750 ml of water), you will not get enough energy in an hour by itself if you are going hard. For training rides of 3 hours or less, I will supplement a bottle of HEED per hour with a couple of gels. For shorter ride, HEED is enough on it's own. The price is good for the quality at around $ 30 for a 32 serving container. HEED is available in lemon, melon, strawberry and orange flavors.

Hammer Nutrition Perpeteum Extreme Endurance Fuel

For those long races or century rides, Perpeteum may be the answer. It contains a mix of carbs, fats and protein in a ratio that studies have shown to extend endurance and reduce muscle breakdown. Like HEED they have a electrolytes added as well, but if you are a heavy sweater or it's hot you may need more added to reduce muscle cramps. Additionally they have added supplementary ingredients that there is some evidence to show helps improve performance such as sodium phosphate, L-Carnosine and L-Carnitine.

I treat Perpeteum like food rather than a drink as it has a grainy consistency so I do not find it thirst quenching like HEED. I mix multiple servings in a smaller bottle and use it to get a little bit every 15 minutes.

You can mix it three different ways depending on what works for you.

  • Single bottle per hour which has around 260 calories. You would get a lot of your fluid from the single bottle as well.
  • Multi-hour bottle. Mix as many servings in a single bottle as hours racing or training. For ultra endurance events this may mean more than one bottle. The mix will be little thick so you need 600-1000 ml of water per hour from another source.
  • Paste. Mix it thick like a pancake batter. Put it in little tubes or flasks you can get from the camping store. Use the paste for calories and get your fluid from another source.

If you can figure out a system that works for you, Perpeteum works very well. The energy is released steadily and it's easy on the stomach. Whether the additional ingredients increase performance, I can not say but having a steady stream of easily digested calories certainly does. I like the fact that with this and electrolytes I do not have to think about feeding during long events. At a certain point you have a hard time keeping things straight in your head and I do not want to have to remember if I ate or drank enough. I do not mind the flavor or batter like consistency but some people can not choke it down. Try it out in training before you attempt using it during an important cycling event.

Overview

I can recommend Hammer Nutrition HEED to everyone but you'll have to experiment to see if Perpeteum is the right fuel for your long distance cycling events.

Unique Gifts For That Special Person – Photo Mosaics

Photo mosaics have quickly gained popularity because of their unique and interesting visual appeal. So what exactly is a photo mosaic and what makes it unique? A photo mosaic is a larger photo comprised of smaller individual photos. Put another way, a photo mosaic is a photo which is divided into small squares. Each square is actually it's own individual photo which closely resembles the color of which the actual rectangle once was. So it's basically a montage of small photos to make one large photo!

Although it is possible to create your own photo mosaics with the help of some specialized software, it is often too hard and too much work to get it right. This is where the online photo mosaic store comes in. It is setup with professional equipment to quickly come up with the optimal design at the highest resolution, and a cost starting at under $ 20! Since you get to view the final mosaic before it's actually printed, there is no risk you will not be happy with the final design. The final mosaic photo is printed with an ultra-high resolution printer, which is almost certainly better than most home printers.

The only thing required to place an order is your digital pictures from your camera or on your computer. If you have a digital camera you almost certainly have digital pictures on your computer. If you can not find your pictures, they are most likely in your My Pictures directory inside My Documents. You can mail them over on a CD or they can be sent over via Email almost instantly.

So what's so special about this type of art, and why does it make such a good gift? Well the photo mosaic you end up with is YOUR photos on YOUR mosaic! What could be a more personalized gift than that? You could fit your entire photo album onto a single picture … a single pictures can hold memories of a lifetime!

How much time and effort do you normally spend looking for that unique gift that is just right for your special friend or family member, and how much would you spend? For the little effort in Emailing over some photos, and low cost involved in getting it made, you get the most personalized gift possible!

Choosing A Professional Painting Contractor

When you moved into your first apartment, you might have ordered a pizza, some beer and invited your friends over for a painting party. After the second or third beer there may have been a few mistakes but you did not really care. When you bought your first home you rolled up your sleeves and got to work, and perhaps you found a local guy in the neighborhood to help out. Now you're a little older and a lot busier and you're wondering about hiring a painting contractor for your house. Is it worthwhile and do the good ones even bother with residential homes? Let's take a look.

Painting contractors have specialized in painting house exteriors for decades. They are experienced in many styles of surfaces such as aluminum, concrete, vinyl, cedar, and stucco. They know how to repair minor damage and choose the paints and finishes that work best for each surface. Be careful when hiring a painting contractor. Like in many industries there are good ones and bad ones. Do your homework and learn how to spot a good one.

Private home painting is an ever expanding market for professional painters. Two income households are now the norm and time is a limited commodity for many couples. Family demands, individual interests, and community involvement all add extra time pressures. Physical limitations can also make painting a bad idea. New painting techniques are popular, but special expertise is often required.

Detail work is time consuming and difficult. Many paint contractors also work with wood stains and finishes and can enhance and extend the life of woodwork. They also know how to properly caulk and seal window frames and that can reduce energy costs for years to come. Experts can spot potential problems and suggest preventative measures, like masonry waterproofing, which will also save you time and aggravation in the future.

Hiring a professional painting contractor for your residential home is a good idea for many reasons. His or her expertise can enhance and protect your property value and offer decorating choices you may not have considered. It also frees up time so you can focus on your family, work and maybe even running in that marathon next fall.

Chandelier – Lighting Fixture That Can Create a Different Mood

Chandeliers are lighting fixture that has been around for centuries. During the early days, these fixtures were only simple cross of woods with spikes that can hold candle.

It is usually attached to a pulley by a rope so that it can be easily raised and lowered for lighting the candles. The lighting fixture in public building sometimes have the same feature, so they can be lowered for cleaning and replacing burnt out bulbs. As time passes by, metalwork fixture became affordable. It is usually made of brass and bronze. But the multi armed fixtures with candles are still being used, but they use electric lights. Here are some of the fixtures that you can choose from:

Crystal chandelier became popular when the 17th century. People discover how to make cut glass crystals. And because of the cheaper crystal glass, the crystal chandeliers have become so popular. It can fill the room with glittering colors of the rainbow and the effect that it brings to a certain room in a home.

Most of this fixtures are made from iron; this is why they are heavy. But this could not be a problem for most homes because there are central beams that can support its weight. The fixture that is made from iron can be contemporary looking, although it has the roots from being antique. Another good option is the black glass crystals. It will not refract the light like a typical fixture but it can add sleek modern look to any room.

Most of the contemporary fixtures do not have branch or arms. They only have central support holding up a central lighted area. This is usually an art deco or a craftsman style. This modern chandelier that has central support is usually called pendant fixture. It comes from different sizes, shapes and colors.

If you are looking for a certain different kind of lighting fixture that you can have for your home, then a crystal chandelier could be the best option for you. You have different options from antique looking to modern looking fixtures. There are also different options that you can choose from in order to change the shades of your existing chandelier. Many people prefer this type as the light is not harsh as the typical lighting fixture that has exposed bulbs. If you have an existing fixture, then you can replace it with a new one that has different shade. this can create a different look and ambiance for your home. If you cannot do it on your won, then let the expert to do it.

How to Pick Up the Most Necessary Gardening Tools?

Gardening tools are extremely important for everyone who wants to make his own garden. But some people often get stuck when choosing the most appropriate tools to fit their needs. Upon deciding to work on your garden, you need to take to your attention the list of basic gardening tools that are going to be presented below.

1) The hoe. A hoe is absolutely essential as a gardening tool. It is used when weeding and cultivating the soil. Digging with a hoe allows nutrients and water to penetrate easier in the soil.

2) The spading fork. That is another tool for digging the soil. It is perfect for improving of hard soil and it is basically used for breaking up the ground. Spading fork is similar to pitchforks in appearance, the difference being in its shorter handle and larger tines.

3) The shovel. If you buy a shovel, choose a round-ended. This gardening tool serves for digging the soil and for forming the beds before the plants are sown. Shrubs and trees can also be planted using a shovel.

4) The rake. A rake is useful for leveling the soil after it has been turned. It also cleans the ground surface from any tough clods of earth or larger stones that can obstruct the planting. Make sure you buy a bow rake. The bow rake has short tines on one side attached to a metal frame-the so-called "bow". The flat side of the bow rake can be used for smoothing the soil before plants are sown.

5) The shears. A pair of garden shears is irreplaceable. Choose the pair that best fits to your hand and do not rush to the most expensive one, if you have not tried pruning before. Shears are also called clippers. This gardening tool is used for pruning the plants and trees, for shaping the hedge and for removing unnecessary foliage.

6) The watering can. It is a gardening tool for watering all kind of smaller plants. For trees and larger shrubs you need to use a watering system. The length of the nozzle determines how far-reaching the water flow will be. The longer the nozzle, the more gentle and far-reaching the water flow. Another tip upon buying a watering can is to buy one with a detachable spray head- so that after removing it, you can water young seedlings.

This list can protect you from spending your money on something completely unnecessary, or on tools too specialized for your needs. Most of the gardening tools offered on stores are utterly useless for the new beginner, and some of them are too expensive. Most gardeners consider a shovel or spade, a trowel, a rake and a hoe the minimum equipment necessary for taking care of your garden. Of course, the specificity of the gardening tools which you may need depends on the effects you want to achieve, also on the size of your garden and on your abilities as a gardener. If you are a novice, you should follow the list and supply your outhouse with these basic gardening tools first. These gardening tools are sold in a large variety of shape and colors, suitable for any aesthetic preference.

If you have a flair for bargaining, you may buy the basic gardening tools at the overall price of less than $ 100. You'd better wait for the end of the gardening season when the prices are lower. Look in every gardening store, flea markets and yard sales as well, before spending your money on a given tool. Remember that your gardening tools are to last for many years and be careful what you choose.

Breast Lift Surgery – Benelli Lift Vs Crescent Lift

A surgical breast lift, or mastopexy, is performed to visibly “lift” the breast into a higher position and sometimes firmer shape and is used to combat breast drooping and sagging that can occur with age or skin stretching. Some women are simply unhappy with the shape or firmness of their breasts but don’t want to undergo augmentation or implant surgery, or don’t require the dramatic results. A lift procedure can be an effective route to take in these situations.

Mastopexy can also help women with slightly asymmetrical breasts, who are unhappy with the general placement of their nipples, or don’t like the height or appearance of the breasts. Some women also choose to have implants inserted in conjunction with the mastopexy.

Incision Types: Benelli vs. Crescent

There are a few different types of incisions that surgeons can make when performing breast lift surgery. Which type you opt for depends on the result you are expecting, the location and amount of scarring you are comfortable with, and what you and your doctor agree to be the best solution following a careful consultation.

Benelli Lift

The Benelli method is also referred to as the doughnut, peri-areolar, or concentric method. Your surgeon will make an incision around the outer edge of the area surrounding the nipple (the areola). The skin is then tightened and stitched to the incision area, which results in masked scarring that mostly disappears over time. This type of surgery is sometimes combined with the crescent lift, which is also explained in this article.

Crescent Incision

This incision is made at the top of the areola. A crescent-shaped area of skin is removed, and the remaining skin is then sutured to the areola. This raises the nipple’s position on the breast.

In addition to lifting, mastopexy can give the appearance of rounder and sometimes fuller breasts, which is a plus for women with smaller breasts who aren’t interested in implants.

Mastopexy should always be completed by a certified and experienced cosmetic surgeon in hygienic conditions. There is always a risk of infection associated with any surgery that involves incisions and stitches, so ensure that you carefully follow any aftercare and recovery instructions that your surgeon provides.

It is advisable that you wear a supportive and well-fitted bra or support garment following the procedure to help the healing process. The recovery period is generally mild; you should be able to return to work after a week providing you don’t have a very physical occupation.

Installing Home Elevators

Installing home elevators becomes necessary when there are physically challenged family members. Besides making the lives of the mobility impaired more comfortable, home elevators also add to the resale value of your houses. When considering upgrading your house, it is important to understand everything about elevator construction.

Advantages of Installing a Home Elevator

Adding a residential elevator to a multi-level house has many advantages. The home elevator will allow the owner to travel safely and comfortably from floor-to-floor. With growing age many individuals suffer from hip and joint pain, and in such cases home elevators are of great utility value.

Specific Features of a Home Elevator

o Enhances convenience, provides easy accessibility solutions to physically challenged individuals.
o Extremely safe, durable and virtually maintenance free.
o Adds uniqueness and value to your house.
o Creates multi-level home accessibility.
o Has a number of useful features and can be customized according to individual needs.

The entire concept of home elevators has changed in recent times; earlier these were considered only as accessibility options for the disabled, but today these elevators are much desired luxury as well as practical items and are beneficial for the aged. Elevators are operated either by a hydraulic piston or a cable-and-pulley and electric motor. Most residential elevators are cable type and are quiet, safe, easy to operate, and relatively quick. The interior of the elevator cab can be finished to match the rest of the house.

A Complete Solution to Enhance the Quality of Life

Many buyers require a house that can satisfy their accessibility needs so that they do not have to worry about their current or future mobility problems. A residential elevator is a desirable option to add uniqueness to your home, and add style and elegance to your life. By installing a home elevator, you can surely enhance the quality of your life and ensure excellent resale value for your house.

Solar Hot Water Systems

The primary components of a drainback-type solar hot water system include:

  • Solar collectors – typically installed on the roof, the solar collectors gather heat from the sun.
  • Storage tank– residential storage tanks are generally 65-120 gallons, depending upon the number of people in the household. Hot water flows from here to the fixtures in your home or business.
  • Drainback tank– this small tank provides freeze protection, and holds the liquids that circulate through the solar loop when the pump is off.
  • System Controller– The system controller is a small, sophisticated computer. This computer is attached to temperature sensors on the roof and in the storage tank, as well as the circulating pump. When the collectors are warmer than the storage tank, the controller switches the system on.
  • Circulating Pump– The circulating pump runs the solar loop. Water circulates through the collectors on the roof and gets hot. From here, the water flows down to a heat exchanger where it heats the water in your storage tank. Cooler water then circulates back up to the roof, where the cycle begins again.
  • Flow meter– The flow meter is used to attain optimum circulation, so that heat is transferred efficiently to your storage tank.
  • Pipes and Insulation- Because of the heat generated by the solar collectors, we recommend copper pipe. PVC piping, particularly near the solar collectors, will not withstand the high temperatures generated. High quality insulation surrounding the copper pipes in a solar hot water system prevents heat loss and makes the system more efficient.

How to choose the system that’s right for you

If you’re interested in a drainback-type system, you’ll want to consider the following.

  • Where should I put the collectors? If you have a south-facing (or near-south) roof that’s unshaded, this is often the ideal location. For a drainback system, the collectors need to be above the level of both the drainback tank and storage tank.
  • What type of collector should I use? There are many options out there. Sustainable Future offers two types, flat plate collectors manufactured by AET and evacuated tubes manufactured by Sunda. For some people, it’s an aesthetic decision. Flat plate collectors look more like skylights if they are flush-mounted. You’ll need slightly less surface area if you use the evacuated tubes. For residential systems, the cost of using one versus another is very similar.
  • Do the collectors need to be tilted at an angle? Ideally, yes. However, if you prefer the look of flush-mounted collectors, this can be done with a small decrease in the efficiency of the collectors. If efficiency is of primary importance, we suggest tilting the collectors approximately 10 degrees more than your latitude (for customers in the northern hemisphere). This gives a “winter bias” and makes your collectors most efficient during the winter months when the sun is low in the sky.
  • What happens at night or when it’s cloudy? A well-insulated solar hot water system will retain the heat in the tank overnight with no problem. If, for example, it’s cloudy for a week in December and you’re using your hot water each day, most systems have either a gas or electric backup to provide supplemental heat if enough solar energy isn’t available. We can also retrofit your old hot water system.
  • What size storage tank do I need? This depends upon how much hot water you’re using per day. For 3-4 people, we recommend an 80-gallon solar storage tank. If you have teenagers who like long showers or a larger family, you may need the 120-gallon tank.

When Should I Replace My Siding?

Time to replace your siding?

When is a good time to replace your siding? That's a good question for the Seattle are as our weather is one of the wettest in the nation and our winters can cause many problems with your homes siding. For the most part you find 4 types of siding on homes in the Pacific Northwest:

Wood siding which is usually Cedar, Vinyl Siding and occasionally Asbestos siding and fiber cement. The typical life expectancy for cedar is about 40-70 years. A lot depends on how well it was maintained. Vinyl siding can last up to 25-30 years asbestos will last more than 50 years and fiber cement will last more than 50 years.

The most common siding material you will see on homes in our area is cedar. Cedar cared for properly caulked and painted or stained on a 5-7 schedule will be able to make it to the later part of our 70 year time frame.

You will start to see the effects of weather on your siding because the siding will begin to crack and split. We also find the nails start to pop out as the wood expands and contracts. The paint will crack and peel off the siding and you may have layer upon layer of paint to deal with.

At this point it is usually better to replace your siding rather than repainting it from the basis of cost aesthetics and long term value. Siding that is starting to show this type of wear may be at risk of leaking and letting water in behind siding usually causes rot and mold in the Pacific Northwest which leads to much more expensive repairs.

To evaluate siding replacement compare to fixing a few boards and repainting you should

call 2-3 local siding contractors and get bids on repair or complete replacement with a product such as hardieplank.

In my experience siding replacement with Hardiplank usually cost about $ 5.00 dollars a square foot for removal and replacement.That means a typical home in our area can be completely resided for about $ 10,000.

You should also get 2-3 paint bids to compare the replacement costs with. Once you get all the you may find siding replacement is good value because it will reduce your maintenance and it will add a lot to the value of your home.

You can still get some of that beautiful old growth lumber its just so expensive many people would find it impractical.

Stainless Steel Staircases and Balustrades For Self Build – 12 Tips

Looking to make an impact to your visitors by having a beautiful staircase? Confused about stainless steel staircases and their use? Here are some useful pointers for the home builder to consider.

1. Can’t decide on your ideal stairway?

Stairway to heaven, or the stuff of nightmares? This is what we want to achieve as you read- to make you to consider your stair project and the finished product.

2. Effective Design

Keep the stair uncomplicated and easy to look at. For example, rather than spindles use glass, and keep overcomplicated detail out of the stair if possible.

3. Legal Aspects

Remember that there are stringent legal requirements for stairs, the boys from Building Control appearing especially interested in the goings and risers. Pay particular attention to where the stair meets the upper or lower floor level here, and also your head room.

4. Make an Impact!

Use your stairway as a statement about your house. The stair is often the first thing that meets the eye of callers to your pad. So why not make an impression and incorporate glass and stainless steel?

5. Stainless Steel

Stainless steel creates the impression in many people of being cold and clinical, used in restaurant kitchens. So how do we use it in a self build situation? Stainless steel staircases, done in a tasteful way, are a fantastic feature in a property. Ensure that the supplier you pick makes a nice product, and request to see their previous work.

6. Glass

Glass is an effective product, especially instead of spindles. The advantage about glass is that it lets light into the hall, and gives a spacious feel.

7. Wood

I wouldn’t use a lot of wood in the balustrades of the stair unless you deem it to be really needed. Tasteful use of wood can in certain situations improve the overall staircase, especially in relation to creating a feeling of warmth. Oak is a particularly good wood to use, as it is plain and strong. Other alternatives to use include walnut and beech.

8. Finishing Wood

There are a number of products on sale for finishing wood, many of which are suitable. Varnish has been popular for many years now, but do think about alternative products, such as wax oil which give a beautiful finish.

9. The Tread

In years gone by, the closed tread was the norm in private houses. Open tread stairs are now gaining impetus, though. Again, this gives a more open and spacious feel to the hall.

10. Stepping Up

In relation to the steps themselves, sometimes it is worthwhile to think about use rubber grips on the treads. As well as being aesthetically pleasing, it is a practical means of stopping nasty falls. Run these out to just shy of the outer edge of the tread.

11. When the Stairs Arrive

Check everything’s there, if your joiner is fitting the stairs. Also make sure that the glass is polished properly, and no deep marks are visible. In my own house, I had to send back the glass as it wasn’t properly polished: it wasted an entire morning of my joiner’s time!

12. So Many Choices!

Open tread, closed tread. Closed string, cut string. Square nosing, round nosing. Wood, steel, glass. Wooden spindles for balustrades, or glass. Hopefully we will have given you some pointers in the above thoughts, and suggest you keep Stainless steel staircases in mind.

What is Architectural Ironmongery?

The root of the word Ironmongery comes from the field of iron products. The term actually stands for the products made from iron and these may contain fixtures and fittings made out of iron, used in buildings and structures. The use of Architectural Ironmongery is basically in railings, banisters and handles. The alternative term used for Architectural Ironmongery is Architectural Metal work or simply Ironmongery.

During the time one is getting a house constructed, there are many different steps and phases involved. Each phase has its own timings and needs to be performed on the right time, if you want the desired outcome. Architectural Ironmongery is the phase that comes after the structural construction has been done. In the UK market, there are many good suppliers for architectural ironmongery.

Architectural Ironmongery is one of the important components in construction when it comes to estimating the construction costs. The things that should be considered while estimating costs are brickwork, rate of construction, the total number of doors, the time required to fix them, attaching the architectural ironmongery, and the costs of the paint. So broadly, the budgeting costs involve the cost of foundations, roof, skin, and structure.

The cost of the ironmongery contributes significantly to the amount that is spent on the internal walls, partitions and doors. With the recent credit crunch and the plunge in the property prices, there has been a trend that the homeowners are spending good amounts of money on refurbishing their properties, instead of making usual ‘Do It Yourself’ improvements.

This means that more money is spent on ironmongery. Expensive improvements made to property increase the value of the property in the market. Ironmongery Direct has reported this trend, which is the leading supplier in the UK for Ironmongery products. When it comes to the sales of Architectural Ironmongery, there has been a growth of around 40% since 2006, when the property market started to decline.

The requirements of the people to make quality improvements to their homes increases demand for Ironmongery products. This has enabled the suppliers to bring many improvements and innovations to the product lines of ironmongery.

In case of repairs made to old houses, black antique iron is immensely used along with brass fittings in ironmongery products, which are in demand for making renovations. Other than these, there is modern brass, chrome, and stainless steel available in huge ranges.

In any building, Architectural Ironmongery has crucial significance because the metalwork attracts attention, and it is one of the first things that are noticed in a structure. In the present circumstances of financial crunch, a lot of consideration needs to be paid on the price as well as the quality of these fixtures, which are used in the structure. In this way your finances are not only saved, but the beauty of the building is also maintained.

Coloured Laminate Flooring – Adding Value To Your Home

Why Coloured?

You will notice that one of the recent trends in flooring is the introduction and increasing popularity of coloured laminate flooring. As laminate flooring is known for its resistance to stains and scratch, as well as its durability, manufacturers are coming up with several product varieties to encourage even the most discriminating home owner to consider using laminate flooring. Besides, laminate flooring with vibrant colors adds charm and cheer to the interior of your home. With a lot of hues available, you can choose the exact shade that is the most suitable to your home. Apart from the versatility it afforded, coloured laminate flooring is also considered the most suitable for contemporary design, which is one of the more popular architecture and interior decorating styles.

Tips for Selecting Colors

When you decide to use coloured laminate flooring in your house, consider some of these tips for determining the right color of laminate boards to purchase. Take a look around your house and determine the color of your furniture as well as other wooden features such as banister, steps, moldings, and such. One good choice of laminate flooring is one that provides contrast with the furniture and architectural features. So if most of your furniture is light-colored, choose a darker shade of laminate flooring to anchor them aesthetically, and vice versa. If you are constructing a house with the plan of selling them afterwards, a neutral shade of laminate flooring would be a good choice, as you have no way of knowing the color preferences of future homeowners. When selecting laminate flooring for high traffic areas of the house such as the kitchen and hallways, it would be optimal if you stay away from light-colored flooring as dirt and other debris can be easily seen.

Simple vs. Intricate

While considering the appropriate color for your laminate flooring, take the time to determine the patterns you want. Though laminate flooring installed in bedrooms and bathrooms typically follow simpler designs, flooring in living rooms and hallways can have designs and complex patterns to impress anyone who come visiting. Coloured laminate flooring also comes in numerous styles that you can choose from. If you love the look of hardwood yet do not have the time nor inclination for the care and maintenance it needs, try installing laminate flooring instead. There are laminate flooring that bear the texture and appearance of hardwood and are available in a variety of color and hues that closely resemble the real deal.

Care for Laminate

There is not much difference in caring for coloured laminate flooring compared to that of other types of laminates. All you need is a quick swipe of clean rag or soft broom to make it clean. However, bear in mind some considerations. As mentioned, light-colored ones need to be cleaned regularly as dirt can easily be seen. Overly dark tones, on the other hand, show dust quite quickly, needing constant broom sweeping.

A St. Patrick’s Day Toast to Irish Runners Marcus O’Sullivan and Eamonn Coghlan

A week before St. Patrick’s Day I bought a pair of Saucony Kilkinney cross-country racing flats. They are a screaming Irish green and stick out like neon lights.

It reminded me of the Sports Illustrated magazine cover I have on my office wall recording the moment from 1994 when Eamonn Coghlan broke the tape at the finish line to become the first man over the age of 40 to run a sub-four-minute mile.

Any day is a good day to raise a glass of Jameson Irish whiskey to the likes of Marcus O’Sullivan and Eamonn Coghlan, but an even better day when it is St. Patrick’s Day.

Before I honor these two Irish running legends let me first acknowledge another great Irish middle distance runner: Ron Delany.

Delany ran for legendary coach Jim “Jumbo” Elliott at Villanova, a Roman Catholic university in the tradition of St. Augustine in Pennsylvania.

Delany became the seventh member of the 4-Minute-Mile Club, but still struggled to make the Irish team for the 1956 Olympics. Once he arrived in Melbourne, he qualified for the 1,500 meter final in which the Australian runner John Landy was the odds-on favorite.

Landy indeed set the pace as Delany fell in behind until the bell lap when he ran a brilliant 53.8 split to set a then Olympic record and took home Ireland’s first gold medal in 24 years.

I believe this is where the great Irish middle distance tradition really got wings. I was 12 years old in 1956, Eamonn Coghlan was 4 years old and Marcus O’Sullivan was born 5 years later.

Delany would go on to win 4 successive AAU titles in the mile, another 4 Irish national titles and 3 NCAA titles for Villanova and Jumbo Elliott.

Marcus O’Sullivan could not get into any Irish universities in his day, but would quickly become a world class runner for Jumbo Elliott at Villanova.

He would win 3 world indoor 1,500 meter titles, compete for Ireland in 4 Olympic games over a 12-year period, and run 101 sub-4-miniute-miles.

O’Sullivan was generally regarded as a better indoor than outdoor miler, winning the prestigious Wanamaker Mile in the Millrose Games at Madison Square Garden 5 times and setting the world indoor 1,500 meter record in 1989 with a time of 3:35.4.

His personal best for the mile-3:50.96-was set indoors in 1987, and his personal best for the 1,500 meters was 3:33.65 in 1992.

After his competitive running career, O’Sullivan returned to Villanova and continues today as Villanova’s Head Coach for Cross-Country and Track.

Guess who also ran for Jumbo Elliott at Villanova? Eamonn Coghlan won 4 NCAA titles at Villanova in the 1,500 or the mile.

Coghlan ran his first sub-4-minute-mile in 1975, setting a new Irish record in 3:53.2.

Like Frank Sinatra in another venue, Eamonn Coghlan would become known as “The Chairman of the Boards” because of his success on indoor tracks. He won the Wanamaker Mile a record 7 times from 1977 to 1987 at the Millrose Games in Madison Square Garden.

Coghlan set the world record in the indoor mile at 3:50.6 in 1981 and again at 3:49.78 in 1983, a record that would stand for 14 years until Morocco’s Hicham El Guerrouj ran 3:48.45 in 1997. Coghlan’s 1983 time still remains the fastest mile ever run in the United States, and 1 of only 3 sub-3:50 miles run on American soil.

Coghlan won a world outdoor title at 5,000 meters in 1983, but he was absolutely lights out devastating indoors. Coghlan was small compared to many of his competitors and perhaps his size gave him a minuscule advantage negotiating the tight turns on the boards indoors.

He also proved he could go up in distance, setting the record for the indoor 2,000 meters in 1987 at 4:54.07, which stood for 11 years until Haile Gebrselassie of Ethiopia ripped off a 4:52.86 in 1998.

Coghlan also had a bit of Irish mischievousness in him when he won the 5,000 meters at the outdoor world championships in 1983. He looked at his Russian competitor ahead of him with glee as he hit the last bend before the finish, knowing he could outsprint him, and then promptly ran the Russian into the ground as he blew by to win.

Eamonn Coghlan’s personal bests are eye-popping: 800 meters (1:47.0), 1,500m (3:35.6), 1 Mile (3:49.78), 3,000m (7:36.6), 5,000m (13:19.11), 10,000 (28:09) and even the Marathon (2.25:13).

His two fourth place finishes at 1,500 meters in the 1976 Olympic Games and at 5,000 meters in the 1980 Olympic Games did nothing to enhance his sterling accomplishments.

He more than made up for it in 1994 when he returned to the boards at Harvard’s Albert J. Gordon indoor track and became the first man over 40 to break 4 minutes for the mile, running an astonishing 3:58.15 indoors.

Coghlan was 41 years old on the day he set the record. He ran more than a second faster than Englishman Roger Bannister in 1954 when he became the first ever to crack the 4-minute-mile barrier on an outdoor track.

It was a stunning moment in track and field history. Here was a man 40+ who had set the world indoor record at 3:49.78 in his prime, ran 74 sub-4-minute-miles, won 11 Irish titles and spend 30 years running competitively when it came to his last lap as fans cheered him on.

Eamonn Coghlan, like so many times before, came flying off on the final turn and sprinted for the tape and, as they say, the rest is history.

“It was like old times,” said Coghlan after the race. “Those last two laps brought it all back to me. My eardrums hurt from all the cheering, but my legs responded.”

He cited breaking the 4-minute-mile barrier indoors at 41 as his most pleasing moment, even better than the world records and the string of Wanamaker Mile victories at the Millrose Games.

It is my fond wish that the memories of these outstanding Irish middle distance runners outlast their records. Long live Ireland (Erin Go Bragh!) and the running of the green.

Copyright © 2007 Ed Bagley