Easy Mind Reading Tricks To Learn

If you are interested in mind reading tricks you are not alone. Many people dream of being able to read minds. While this may sound impossible or something that only a superhero could do, nothing is further form the truth. In fact, you will find out soon enough that you can learn how to read minds in many ways. There are several tricks that you should start with in order to get your feet wet. From there, it is much easier to move onto bigger and better things.

To get started with mind reading tricks you should first learn about the synchronized arm lift. With this, you blindfold another person and tell him to raise his hand whenever he feels like doing so. You should stand a second person behind the first and tell him to also raise his hand when he feels like it. Whenever they do, the blindfolded individual always raises his hand at the exact same time. This is one of those mind reading tricks that you can quickly learn and use.

What about the psychological coin prediction? This is another trick that is a real crowd pleaser. No matter if you are reading minds in front of a large group of people or hanging out with friends and family, you are sure to see amazement on many faces. With this trick, a spectator takes a coin and places it in either hand behind his back. If you know the trick, when they bring their two hands out you can instantly tell where the coin is. From there, you can place the coin in one of your hands and influence the person to pick the wrong one time and time again. Again, you have to know the trick if you are going to make this happen.

The winning hand helps you influence somebody’s selection of 10 cards so they always have a losing poker hand. Even if the cards are facing up they will pick a loser and leave you with a winning hand.

Do these mind reading tricks sound cool? Are you interested in learning more? If so, you should search for the proper professional advice. Remember, mind reading is not as hard as it sounds. If you know the tricks and how to work the audience, you will be well on your way. These mind reading tricks are among the most common. Learn how to do them today!

During the Interview Session – Some Do’s and Dont’s

Employers have four main concerns when hiring a new employee:

1. Do you have the skills and experience to do the job?

2. What kind of person are you?

3. Will you fit in at the company and benefit us?

4. What will you cost us?

When asked, “Why do you think you are a fit for this job?”, answer with:

• I have the potential to benefit the company in two areas. (Mention two areas where you are sure you can add value.)

• I can answer that positively for two reasons. (Mention two examples or facts as proof.)

• My three strongest qualifications for this job are ______, ______ and ______. (Always emphasize your skills!)

• Based on the information you have shared with me today, I can say that I have the potential as well as the enthusiasm and persistence that you expect from someone working for your company. (Give examples.)

• I have encountered situations and challenges in my previous jobs that are similar to those involved with this position and I have a successful track record. (Elaborate on one.)

Keep in mind that you are selling yourself to everyone you meet. This means the receptionist, the assistant, people you pass in walking, people in the elevator. If everything goes well, you will be working with these people! The more people you leave with a good impression, the better your chances are of being remembered. Project yourself as someone who is pleasant, thoughtful, helpful, and prepared.

• Be ready to demonstrate these qualities. Employers are interested in applicants who:

o Are goal-directed and have a good sense of what interests them based on their strengths;

o Have some knowledge of the organization and why they want to work there;

o Are confident of their potential to contribute to the organization; and

o Can discuss past experiences that demonstrate the skills and abilities that are important to the employer.

• Do not be late. If possible, arrive 15-20 minutes early for the interview. Find a place to gather yourself and check your appearance, make sure your tie/clothes are straight and not wrinkled; your paperwork is in order and get your thoughts together. Turn off cell phones and other electronic devices before the interview.

• Do not bring anyone with you. If you are sharing a ride with someone, they must wait in the car.

• Introduce yourself with a confident handshake and a smile! First impressions go a long way, make it a great one! First impressions are made in the first eight seconds and hiring decisions are made in the first 35 seconds. That is why it is so important to get off on the right foot and build instant rapport with the interviewer. When you have rapport with the interviewer, it enhances your ability to connect with them at a deeper level. You may even create feelings of trust and friendship.

• Maintain positive body language. Sit up straight and look interested.

• Maintain eye contact with your interviewer. If you are being interviewed by more than on person at a time, be sure to maintain eye contact with all parties. Keep your focus and intensity level high throughout the interview.

• Listen closely to your interviewer. Rephrase the questions your interviewer asks and use them as the beginning of your answer. This saves you from wasting your interviewer’s time, and shows that you are a careful listener. Answer questions specifically, briefly and to the point. Make sure you give them the information they need to assess that you are the right fit for the job. Do not ramble on and on. Remember, no one has ever listened themselves out of a job!

• If you do not understand the interviewer’s question, ask for clarification. Do not start rambling to cover up the fact that you did not understand.

• Ask questions. Asking the right questions show that you can think strategically, and help you decide if the position is right for you. If it has not come up already, end the interview with this question: “What are you looking for in a candidate to fill this role?” If the answer does not match your expectations, then you need to speak up. Keep in mind the interview is also for you to decide if the job is right for you too!

• When the interviewer refers to your resume, focus on your accomplishments, not just your job duties.

• Do not be intimidated by the interviewer. They do not want you to fail; they want you to show them why you will succeed with their company. The sooner they hire you, the sooner their (and your) search can end.

• Do not be intimidated by any questions your interviewer asks. The ability to think on your feet is an important asset, so show your interviewer you can do that. Be confident with your responses!

• Never curse or swear during an interview, even if the interviewer does. Be the true professional!

• Do not give any negative answers or speak badly about current or past employers, managers or experiences. When an interviewer asks specific questions about your current/past employer and tries to trick you into giving negative answers, do not fall for it! Behavioral questions are designed to make you sweat and turn negative. Be positive and consistent with your responses to all types of questions. Always prepare positive answers beforehand (see the silver lining in everything).

• When asked, “What are your weaknesses?” answer it by stating where you fit and were you may not fit in the organization as it relates to your skills.

• Do not worry about being nervous, it is a natural response. Use that nervous energy to your advantage and be enthusiastic, but be careful not to overstate answers or talk too much.

• Never ask the company about salary or benefits packages until after you receive the job offer.

• Never try to close too soon, for negotiation time may be long.

• If you really want this job, do not leave without expressing you genuine interest in getting this job.

Malcolm Johnston: Champion Australian Jockey

Malcolm Johnston was from the Theo Green School of jockeys that produced many champions like Gordon Spinks and Darren Beadman to name a few. Born in 1956, Johnston grew up in Orange, Western NSW, before joining Theo Green at Rosehill and then at Randwick. His fist victory in a big race was in the 1976 VRC Lightning Handicap on Desirable, trained by Colin Hayes. He was also a stable jockey for trainer Tommy Smith, which was the beginning of his partnership with Kingston Town.

‘Miracle’ Johnston, as he was known as, soon became a superstar in the world of racing with a record breaking partnership with Kingston Town. The duo won 25 races out of 30 which included five Group One titles when Kingstown Town was a three-year-old which included the 1980 Cox Plate. The duo almost took the 1982 Melbourne Cup but lost to Gurners Lane as Johnston admitted to starting the finishing run early, leaving Kingston Town drained towards the finishing line.

He won 3 premierships as an apprentice and finished his career with 3 Sydney premiership titles and 3 runner-up titles. In his first season as an apprentice during 1973-74, he finished second in the premiership. The next season he won the Sydney Jockeys’ Premiership title as an apprentice, breaking Jack Thompson’s record with 107.5 wins. His skills took him across the globe to England, France, Hong Kong, the Middle East, and New Zealand. At the time of retirement, Johnston had 39 Group One victories and over 2000 winners to his credit. His major wins include the Caulfield Cup, two Epsom Handicaps, two Oaks, five Derbies including the AJC and VTC Derbies, the W. S. Cox Plate, a Doncaster Handicap double, two Lightning Stakes, the 1980 Sydney Cup, the STC Tanvred Stakes, the STC Rosehill Guineas and an Adelaide Cup.

Johnston was virtually unbeatable especially during his partnership with Kingston Town from 1979-1982. He was also suspended on 56 occasions, which cost him a few titles including the 1981 MVRC Cox Plate. On one occasion, Johnston was suspended by stewards for a careless riding charge in the 1978 Wyong Cup, and he was ordered to pay $121,490 in damages to rider Glenn Frazer. Frazer sued Johnston for fractured left thigh, a severe back injury and other injuries. Johnston denied any act of negligence but the New South Wales Supreme Court ruled in Frazer’s favour. The court stated that a competitor could be held liable for an injury caused by an error of judgment.

No matter what, Malcolm Johnston was a naturally gifted jockey who later made the decision to take up training in 1997. He established his headquarters at Hawkesbury, training over 200 winners that included Stakes winners like Stella Maree and Shags. With his wealth of experience in riding he joined the team at Racing NSW as ‘Training Officer – Hunter & North West Region’, in charge of 200 trainees. The legendary rider is also a corporate speaker, known for adding a few laughs to everything he says. Naturally, Johnston statess to have been the courtroom jester in the jockey’s room.

But there is one thing that Johnston is serious about. Malcolm Johnston honestly believes that the Kingston Town should be the only yardstick for the term ‘Champion’.

How to Bottle Wild Meat

Separate the raw meat into pieces for cooking. Cut away unwanted pieces. Make sure the meat is clean. Wild meat is very low in fat so do not try to cut away what little fat there is, as this will be needed for cooking. The low fat will cause the meat to not shrink as much during cooking.

Season the meat as to your desire, however with game less seasoning is better.To much seasoning may kill the taste of wild meat. Double check for hunting remnants such as shrapnel, blood shot meat, hair and dirt etc. etc. Make sure your meat is clean.

Cook the meat with whichever recipe you prefer. Wild meat will dry out faster than domesticated meats because of the decreased amount of fat. Monitor the cooking closely.

Here is a great way to bottle moose meat, caribou, rabbit or Partridge.

Mason Jars 500 ml. Cut meat in small pieces around bit size preferably a little larger. Use stew meat or a tender part of meat.

Use salt pork and onion. Cut pork in small pieces (Bite Size) Chop Onion in small pieces.

Place a piece of salt pork on the bottom of Mason jar with a little onion Add meat When Mason Jar is half full add another small piece of onion and pork fat. Amount of onion and pork fat depends on one’s taste.

Fill Mason Jar. Leave room for a little more onion and pork fat on top.Add water to cover meat. If you wish you can add a little pepper

Preheat oven for 15 minutes at 300. Place meat on a tray in oven and cook at 275

Check every hr or so and make sure meat has enough water. Just up over the top of meat

Allow 3 hrs for meat to cook well but watch carefully do not overcook. Watch closely depending on the game and the stove meat may cook faster.

No checking over a pot of meat on the stove. It is a great way to cook and bottle wild meat. Cook until tender or to your taste’

When meat is almost done, take the tops and boil in a pot to make sure the rubber seals are soft so they can seal well. When done take out bottles on tray. Make sure the top of bottles are clean. For a good seal wipe dry. Place covers hand tight. Wait a few minutes until you hear a pop. That means the covers have made a good seal. Let cool. Make sure you have a good seal and the covers are tight.

Top Tips From Professional Cleaners

Cleaning the property isn’t something that you’ll enjoy doing. Nevertheless, it can be so much easier if you use a few tips. Check this post to discover some helpful recommendations from professional cleaners.

Steam cleaning the microwave

The microwave could get dirty as a result of burnt food. Trying to clean the inside of the microwave can be really hard. However, it could be made easier with the help of a steam. Simply fill a cup with water and put it inside the microwave for a minute on full power. The steam will fill the inside of the cooker which should loosen the grime. Another similar method can be used with ovens, but you have to put the water in a metal or ovenproof dish.

Dust first

Dust around the room just before you start vacuuming. In other words, any dirt knocked off the walls during dusting will be sucked straight up the vacuum. Thus your house is going to be much cleaner and tidier.

Removing cobwebs

Cobwebs can make your home look filthy, even if the rest of it is spotless. That’s why, it is so vital to deal with cobwebs as soon as you see them. As cobwebs are normally high up in the corners of rooms, they could get missed during routine dusting. To make this a lot easier, lightly dampen a cloth and tie it onto a broomstick. Then you can reach wherever the cobwebs are. The damp cloth can make the cobwebs stick so they’re removed in one go.

Check before you vacuum

When vacuuming under the sofa and other large pieces of furniture, many people simply push the vacuum cleaner underneath as far as it will go. This is a quick way to accomplish it, but you have no idea what is lurking under the sofa. There could be many small toys or even coins under the sofa. By looking you can save them without having to go through the filthy vacuum cleaner bag.

Use microfiber cloths

Instead of using traditional dusting cloths, you will find that microfiber cloths perform better. These are statically charged to ensure that dust sticks to them. Avoid using terry towelling because these could actually create dirt as opposed to removing it. If you do not have microfiber cloths, then you can use cotton materials which are a bit damp. An old T-shirt or a pillow case can be perfect.

Scrape off soap filth

If there’s any soap scum on any areas in your bathroom, then scrubbing it off with a sponge could take ages. It is also extremely exhausting because it involves a lot of scrubbing. An easier alternative is to scrape it off using a putty knife. When doing this, be cautious that you don’t damage the surface.

Keep stainless steel looking great

If you have a beautiful kitchen with lots of stainless steel, then keeping it clean could be a big challenge. An easy alternative is to put mineral oil onto a cloth and rub it over the stainless steel surfaces.

Even though these tips do make cleaning easier, they don’t make it quick and easy. If you would like an easier option, you should consider using professional cleaners to do the work for you. Specialist cleaners not only know these recommendations, but know how to do the work properly and to a high standard. To benefit from this selection, you should call 020 3322 7903.

Choosing the Right Storm Door From an Expert Storm Door Installer’s Perspective

Making the decision to add or change a storm door to your house can drastically change the look of your home. It is important to choose the right storm door that fits with the look of your house. When choosing a storm door, there are 5 main things to consider: Price, Material, Size, Handing, and Style.

Pricing on Storm Doors

First and foremost, you should stick to your budget. Storm doors range in price from around $100-$300 for standard size doors that you can find at Lowe’s or Home Depot to around $300-$500 for custom sized doors ordered from the same retailers. Now be realistic, while you may find a coupon that gives you a good deal, a $100 screen door is not going to perform like a $500 storm door.

Now you may ask, “What makes a $500 storm door better than a $100 storm door?” The answer is the materials and the bells and whistles. Vinyl storm doors are less expensive than extruded aluminum storm doors. While you save money on the price, they will wear out faster because of exposure to the elements. However, you can get a wood-core vinyl door which is more sturdy and provides better insulation for a little bit more money. On a higher-end door you may get a choice of custom colors like cranberry, hunter green, or almond where on the lower end you can only have white or black. With more expensive doors you can usually choose a hardware color ranging from brass or silver to oil-rubbed bronze and antique brass. One important difference is most top end doors come with 2 door closure pistons instead of 1. They are mounted at the top and bottom of the door instead of just having one at the top of the storm door. This gives the door better rigidity and allows you to adjust the speed more. Keep in mind that the cost of a separate piston is only about $5.00, so don’t spend an extra $100 on a door just to get a second door closure.

The best way to get a sense of the price is to either go into a national retailer like Lowe’s or Home Depot and look at the storm doors or search online If you go to a store, be aware that while some associates may have general knowledge, most do not know the first thing about storm doors. I personally try to avoid them because in my experience none of them has ever actually installed a storm. To make matters worse, their training is minimal and they give cookie-cutter answers to all your questions. Personally, I like to shop online to compare prices and narrow down more what I am looking for.

Another thing to consider about pricing is that most storm doors are Energystar compliant, which means that your new door qualifies for an IRS tax credit. The credit can be up to as much as $500 and is claimed on your next years taxes. So keep in mind that you can save money on your taxes by purchasing a higher end door. For more information, refer to our Storm Door Information page.

Materials

All storm doors are made from metal, wood, vinyl/plastic, or some combination thereof. Less expensive doors use vinyl/plastic and may or may not have a wood core for added rigidity and insulation. More expensive doors are made from extruded aluminum (“extruded” means “shaped”)

The benefits of vinyl/plastic doors are that they are less expensive to purchase, are easy to clean, and inexpensive to replace. With vinyl doors, especially Emco’s Forever door, the color is molded throughout the door. This means that a scratch on the door is less visible because it is not a different color underneath. The drawbacks are that these storm doors wear out sooner, look “cheaper”, and have trouble standing up to extreme heat and cold.

The benefits of an extruded aluminum door are that it is heavier, more durable, longer-lasting, and better looking. They look classier and offer much more security. The drawbacks are that they are more expensive, are little harder to clean, require more maintenance, and can become hot to the touch when exposed to heat for a long time.

Sizes of Storm Doors

While you can order a storm door in whatever size you need, standard door widths (measured in inches) are 30″, 32″, and 36″. Standard door heights (measured in inches) range from 80″-81″ and 96″ (for 8′ feet tall doors). Traditionally, your front door opening is 36″ wide by 80″-81″ high. Back doors are traditionally 32″ wide by 80″-81″ high; however newer homes (built after 1990) have been also using 36″ wide by 80″-81″ high doors at times.

Storm Door Handing

One of the most important questions down the road becomes, “Which way will the door open?” If you are dealing ordering from a retailer like Lowe’s or Home Depot, it is imperative that the sales rep be crystal clear on this. In the world of door installations, handing is everything. Now we get to some industry jargon.

First, ALL storm door measurements are assuming that you are standing OUTSIDE of your house looking at the door. Now, handing is stated as either “left-handed” or “right-handed.” This means that if you but your back against the jamb where you want the door do be hinged, whichever hand of yours is on the outside is the “handing” of your door.

For example, let’s say you but your back against the hinge side jamb of your front door and your right hand is facing the outside. Then you want a “right-handed” door.

The good news on handing is that most standard sized doors can be installed either way; you don’t have to purchase a storm door that is pre-handed (unless you have an 8′ tall door).

Now most of the time you want the storm door handles to be on the same side as the entry door handles. However, there are a few cases where this is not true. One such case is if you have a wall close to the opening. It is always preferable to have a storm door open towards a wall that is 12″ or less from an entry door. This is to ensure that your “traffic pattern” is not interrupted. Meaning that people won’t have to open and then walk around the storm door to get into the house. Doing this ensures that the storm door is not in your way when you enter and exit the house.

3 Styles of Storm Doors

Storm doors come in 3 different styles: Full-view, Ventilating, and Roll-screen.

  1. Full-view: A Full-View door is one where you can have ONLY the glass panel OR the screen panel in the door at any given time. You must physically change the glass and the screen and store the panel that is not in use. If you want to maximize daylight and visibility to the outside, this is the way to go. As long as you don’t mind installing the screen in the spring and the glass in the fall, you will be happy with this door. It does not have a line across the middle of the door obstructing visibility.
  2. Ventilating: If you do not want to go through the hassle of changing glass and screen, the ventilating style keeps both glass and screen in the door at the same time. With this style, there are 2 panels of glass, and depending on the manufacturer, one or both move up and down revealing the screen portion and allowing for ventilation.
  3. Rollscreen: The Rollscreen models are the newest hybrids and take the best of both worlds from the Fullview and the Ventilating style. In this style, the screen is still self storing like the ventilating model, but you get the visibility of a fullview door because the screen is rolled up on a tensioned dowel at the top of the door. As you pull the top window down, the screen is attached and then revealed. This is a great choice of you have kids or pets that have a keen ability to destroy screens, because the screen is only on the top part of the door . . . far out of their reach.

Once you have decided which style, then it is time to decide which manufacturer.

There are 4 main storm door manufacturers: Pella, Larson, Emco, and Anderson. Lowe’s Home Improvement sells Pella and Larson brands while Home Depot sells Emco and Anderson products. From an installer’s perspective, I would rank these manufacturers in order of preference based on product selection, price, durability, warranty, ease of installation, customer service, and fewest number of problems in the long run as:

  1. Pella Brand Storm Doors
  2. Larson Brand Storm Doors
  3. Anderson Brand Storm Doors
  4. Emco Brand Storm Doors

Carefully considering these 5 areas of storm doors will ensure that you pick the right storm door for your home. It will help take out some of the stress involved in selection, and make sure that your expectations of the performance of your new door are realistic.

Platonic-Fullerene Chemistry and Nanopolymer Technology

The science of Platonic Fullerene Chemistry has been reunited the cultures of science and art to re-establish the ancient Platonic Science for Ethical Ends. This means that the concept of Aristotle’s ethical science to guide ennobling government can now re-emerge throughout the world. The objective of that ancient science remains exactly the same as it once was. It is science, designed to avoid human extinction. The existence of two separate chemistries, one about the physical material reality and the other about the functioning of Dr Candace Pert’s Molecule of Emotion, forms the structure of this human survival science. Both chemistries entangle with each other to describe universal reality. This provides the basis of the ancient Greek political concept of allowing the people to choose between what Buckminster Fuller’s called Utopia or Oblivion.

The global slide toward oblivion today is much as it once was in ancient Athens, when the Tyrants plunged the city into impossible debt, threatening such chaotic violence that Solon was appointed to sort out the economic differences in a peaceful manner. He abolished personal debt and interest on loans, as well as making property ownership more accessible to the people. Within ten years Athens became extremely prosperous. His wisdom, on behalf of the people, made contributions toward more democratic concepts in the face of complex greed manipulations by unethical power brokers.

After ten years of growing prosperity the Tyrants again seized control and Athenian power began its path to decline by foreign aggression. Today the same situation has returned to Greece and other nations caught up in the current global economic nightmare, now threatening to destroy the civilisation of the United States of America. It can be considered that stakeholders in global economic rationalism might be able to conceive, to their benefit, a modification of their present economic legal responsiblies, by upgrading them to meet the new medical chemistry guidelines.

During the 20th Century it was common knowledge that our entropic chemistry, governed by the second law of thermodynamics, had correctly stated that it is impossible to construct a perpetual motion machine. However, such concepts can now be reasoned about logically with an understanding about the functioning of the integration of both the new and the old chemistries. Past economic rationalism, however, invented concepts that sought perpetual economic growth for the benefit of human civilisation. TIME Magazine’s Century of Science’s greatest scientist for 1907 was Maria Montessori, who realised this was in error, referring to the entropic second law as the Greed Energy Law that would only bring about economic collapses and continual warfare.

Working with the Jesuit Priest, Tielhard de Chardin, Montessori postulated the existence of an electromagnetic key to open the ‘Golden Gates’ to the future. This electromagnetic key was Immanuel Kant’s God-like Ethic for perpetual peace on earth, the subject of Hans Christian Oersted’s Doctorate in 1799 titled,The Architectonicks of Natural Metaphysics. Oersted envisaged a new electromagnetic biological technology, which, in modern terms, is the quantum biology of the new Platonic Fullerene Chemistry. This makes Faraday’s concept of the electric motor a child’s toy by comparison. We now know from nanopolymer research, that such an electromagnetic life-science ethic is associated with the functioning of the centriole within the human cell, giving glimpses of a truly supra technology beyond our previous ability to imagine.

It is not necessary to use such technical terminology to demonstrate to the people that modern science and economics has been constructed upon false assumptions that dismissed human feelings as part of its composition. Leonardo da Vinci was not the man of the Renaissance the public has been led to believe. His optics key in his Theory of Knowledge, claiming that the eye was the source of all cognition, was erroneously supported by Rene Descartes and Sir Francis Bacon, pivotal figures of the mechanical era. At the moment of conception the eye does not even exist to guide any evolutionary development at all. Leonardo was unable to envision the liquid crystal optics of the eye of the cell. When the fertilising sperm, driven by a male nano-scale electromagnetic motor, penetrates the liquid crystal optical construction membrane of the female ovum, Dr Carl Callerman’s universal purpose is brought into living focus as a balanced Yin-Yang electromagnetic centriole. The optics of the cellular membrane, not the optics of the human eye, holds the key to all knowledge. The centriole is the carrier of universal life-science purpose.

Scientists such as Roger Penrose and Stuart Hameroff are researching about what can be considered to be crucial properties of the centriole that are associated with the cerebral functioning of micro-tubule polymers. Without a doubt, nano-polymer research is now becoming crucial research for humanity’s future. However, Buckminster Fuller’s warning about making the choice between Utopia or Oblivion is of paramount importance to the people of the world. Fears about entropic nano-bot technology appear to be well founded. Plato warned about the destructive evil of unformed matter within the physical atom that could emerge from the actions of engineers who knew nothing about spiritual optical engineering principles belonging to the science for ethical ends. Today, the nuclear radiation threat spreading into Japan pales into insignificance to the threat posed by current entropic nanotechnology.

The British Astronomer Royal, Sir Martin Rees, has predicted that uncontrolled nanotechnology research is one of the inevitable human extinction outcomes that is likely to occur this century. In order to comprehend the solution to that dire threat of oblivion, we need to understand the basic relationship between the old familiar chemistry and the new one that is now emerging alongside it. We must free ourselves completely from being governed by an entropic dictatorship that denies that the science of life is linked to the infinite ethical fractal logic of the new chemistry. It is no longer acceptable to considerit heresy that Sir Isaac Newton’s conviction, written in his Heresy Papers, that the world-view of a material universe must be completed with a more natural, profound philosophy, a philosophy based upon the same physics principles that upheld the original Platonic Science for Ethical Ends. Newton’s infinite world-view can only be upheld by the same fractal logic that was basic to this lost science, and which is also fundamental to Platonic Fullerene Chemistry.

Buckminster Fuller’s warning about a science governed by entropic logic was echoed by others such as the Molecular Biologist, Sir C P Snow, the Nobel Laureate in Medicine, Szent-Georgy, and the Max Plank Astrophysicist, Peter Kafka. All of these people warned that the mind-set of Homo Entropicus was following a path to total chaos. This is indeed an entrenched scientific culture, Einstein wrote that the second law of thermodynamics was the Premier Law of All of Science. Einstein’s colleague, Sir Arthur Eddington called it the Supreme Metaphysical Law of the Entire Universe. Charles Darwin used it as the basis of his Theory of Evolution, actually citing Thomas Malthus’ economic theories, which, in the 18th Century, had become synonymous with the second law of thermodynamics. For Western Moral Jurisprudence Law to attempt to continue to enforce an entropic global economic rationalism upon the global population can be considered to be a recipe for World War III.

In Volume 12 of the collected papers of Bertrand Russell, written in 1902, mention is made of Platonic metaphysics, but Russell lost belief in those ideas, although that particular work is considered to warrant further serious study. His, A Free Man’s Worship, published in 1903, was a dedication to Albert Einstein’s concept, that all life must be destroyed by the dictates of the second law of thermodynamics, the universal entropy law, and this became Russell’s most popular reprinted essay. He wrote that “…the whole temple of man’s achievement must be buried beneath the debris of a universe in ruins…” and “… only on the firm foundation of unyielding despair, can the soul’s habitation henceforth be safely built.” In the light of the new Platonic Fullerene Chemistry, this horrific world-view that has been governing Western science for so many centuries, is no longer acceptable.

We know that various ancient Eastern philosophies were able to associate fractal geometrical logic with human emotional feeling. For example, the ancient Indra Diamond Net Necklace fractal demonstrates emotional concepts that are relevant to Dr Candace Pert’s Molecule of Emotion discovered in1972. It is ignorant and offensive to consider such ancient philosophical ideas to have been ancient acts of pagan, barbaric behaviour, as was believed by St Augustine during the 5th Century, following the murder of the mathematician, Hypatia, in 415, who was the custodian of the Great Library of Alexandria.

During the 5th Century, over a thousand years of fractal logic life-science research were burned and dismissed from the mind-set of Western culture, influencing the Western world for another fifteen hundred years. The great genius, Albert Einstein, may have caused Bertrand Russell’s inspiration that we must accept a living hell on earth, but Einstein’s real greatness was that his protege, David Bohm, and Bohm’s colleague, Karl Pribram, managed to break the entropic barrier to give the world a glimpse of the workings of an infinite fractal holographic universe. Einstein can be considered to have been instrumental in making that possible.

The front cover of New Scientist, dated the 26th of June 2010, heralded the Rise of the Quantum Machines. The relevant feature article carried the heading that “The new breed of quantum machines promise to patch a gaping hole into every experiment ever made”. The quantum researcher at the University of Illinois at Urbana-Champaign, the Nobel Laureate, Anthony Leggett, considered that although quantum theory is our most successful physics theory to date, it may not continue to describe the physical world perfectly, because there are too many issues that approximate reality.

The quantum theory mentioned in the article emphasises the physical world. The new Platonic Fullerene Chemistry, however, is about quantum biology and its interweaving with the world of quantum mechanics. This permits new models of reality to come into existence that challenge the validity of our understanding of the second law of thermodynamics. One of physics’ most famous thought experiments is that of Shrodinger’s cat, which can be dead and alive at the same time, an argument designed to demonstrate that quantum theory can be considered to flawed. Many scientists argue otherwise, referring to the property of a single Fullerene carbon-70 molecule being able to go through two separate slits at the same time within Young’s double slit experiment. Ideas about parallel universes appear to emerge from such thinking, which although interesting, do not seem to be addressing the serious consequences of maintaining an entropic mind-set.

Due to the serious issue of Fuller’s choice between Utopia or Oblivion underlying this article, it has been deemed warranted to make an attempt to present some reasoned argument that might draw public attention to its perceived peril at the hands of the second law. The properties of the Fullerene Carbon-70 is of great interest to the Science-Art Research Centre of Australia, which is closely associated with the development of the New Measurement of Humanity Project at the University of Florence. The Centre has adopted the Mark Robinson model of space-time, which provides a suggested solution to Young’s famous double slit experimental paradox and it is therefore considered prudent to mention this as being representative of the new models of space-time that are now emerging in defiance of the second law of thermodynamics

Robinson’s model was among such models noted in the text of a quantum biological paper by Huping Hu and Maoxin Wu, titled On Dark Chemistry- What’s dark Matter and How Mind Influences Brain Through Proactive Spin. The paper was about how primordial sub atomic spin influences consciousness in defiance of the second law of thermodynamics and was published in NeuroQuantology, Volume 5, issue2, June 2007.

In accord with Plato’s dictum that all is geometry, Robinson postulated that a fundamental concept of space-time describes a simple premise. Information within energy creates a unique geometrical structure of time, space and matter, reminiscent of Sir Isaac Newton’s ‘very subtle spirit’ mentioned in his Fundamental Principles of Natural Philosophy. In Robinson’s model, a constant acceleration of light upgrades a holographic pattern of space-time reality, compatible to Newton’s association of light carrying information related to gravity. Space-time comprises of three phase states, past, present and future as a singular geometric event. Each phase’s location is uniquely defined within the time line. This suggests a coherent geometry through space-time, replacing the concept of randomness and Heisenberg’s uncertainty principle.

Nonlocality, the ability of information exchange beyond space-time, is essential to Robinson’s model. Each phase of a moment of time communicates within its being, to constantly upgrade its local environmental space-time structure of the universe. Within Young’s double slit experiment, this process might play a role to explain paradoxical events. We know from the EPR paradox that information can be in two places at once and we might now associate this with the workings of some intelligent purpose rather that submit to Bertrand Russell’s world-view of uncertainty and chaos. Order from chaos can be considered associated with sub-atomic movement evolving through space-time, compatible with both the physics principles upholding the Platonic Science for Ethical Ends and Sir Isaac Newton’s complete description of the universe.

Professor Paolo Manzelli and Professor Massimo Pregnolato were awarded the Georgio Napolitano Medal in 2010 on behalf of the Republic of Italy, for their quantum biological development of Platonic Fullerene Chemistry, as part of their New Measurement of Humanity Project, the New Renaissance. Their Age of Quantum Entanglement in science and art allows for an understanding of how the process of chaos simultaneously enacts an auto catalytic event that produces a new ethical, or healthy, order in nature, described as the “Principle of Fertile Evolution”.

Event Planning – Take Your Event From Good to Great!

You’ve been tasked with planning an event and don’t know where to begin. Take a deep breath, anyone with any level of event expertise can take an event from good to great. Here is how:

For beginners, it is imperative that you do your homework. You must first generate an event plan and consider the building blocks of any event: target market, situational analysis, the 6 P’s and planning.

Let’s get started. Think very clearly about the people you are trying to attract. Ask yourself the question: Who is your target market?

Once you identify those that will be attending your event, allow yourself time to travel into the hearts and minds of your potential audience. Believe me; knowing what kinds of things they like to see, do, buy and eat will be helpful as your event plan begins to come to life.

Now that you have your target market in mind, let’s take a look at your situational analysis. You will need to examine your internal strengths and weaknesses and your external opportunities and threats as they relate to whatever you are planning to do. You must be brutally honest with yourself when analyzing the various components of your event.

The next step in taking your event from good to great is to identify the 6 P’s of event planning: Purpose, People, Product, Place, Price and Process. Outlined below you will find the questions related to each P that you should answer prior to diving into the planning phase.

– Why are you doing this event? (Purpose)

– Who will attend? (People)

– What are you going to do? (Product)

– When and where? (Place)

– How much is it going to cost you? (Price)

– How are you going to get the job done? (Process)

Now that you have identified your target market, have performed a situational analysis and have answered the building block questions of planning an event, you are ready to develop a formal event plan and begin execution shortly thereafter.

A formal event plan has several interrelated components: goal, objectives, strategies, tactics, budget, timetable and evaluation. Your written detailed plan of action will serve as the backbone to your master event plan. Keep it close at hand and refer back to it often.

Congratulations, at this point you have finished your homework and can now move into the imaginative, fun side of event planning! Take your events to the next level by identifying a theme and carrying that theme from start to finish.

Planning a successful event is no walk in the park. It is tedious work and requires an individual who always keeps their dancing shoes and party hat nearby. One who is forever excited about the adventure and who remembers that problems that will inevitably arise but the beat must go on.

You’ve got a plan, now the let the event begin. You are on your way from good to great!

Galvanized Finishing Nails in a Nutshell

Galvanized finishing nails are specially treated through various procedures to increase their durability and resistance to corrosive factors such as salt and moisture. These nails are usually made of materials such as brass or copper, many of which may be susceptible to corrosion when exposed to the elements. To reduce this tendency, they can be treated through a process known as galvanization. A layer of another metal such as zinc is applied to the exterior of a nail in order to prevent rusting, corrosion or discoloration.

Nowadays, nail galvanization may be performed in different ways. Firstly, electricity can be used to apply a layer of zinc to the surface of a fastener in what is known as the electro-plating or electrodeposition process. Secondly, in the hot-dip galvanizing process, galvanized finishing nails are produced when ordinary nails are dipped into tanks of molten zinc. Thirdly, in mechanical galvanizing, zinc powder is hammered onto nails to protect their exterior. Lastly, in the hot-tumbled galvanizing process, nails are dropped into rotating barrels with zinc chips and heated in order to be coated with melted zinc.

Regardless of the specific procedure, galvanizing results in finishing nails that are far less susceptible to corrosion than they would otherwise be. Since zinc is less prone to corrosion than copper or brass, galvanization can help lengthen the service life of a finishing nail. The use of galvanized finishing nails thus reduces the probability of woodworking problems such as staining due to corrosion or reduced durability of the overall project or structure.

Aluminum Garden Furniture – Keep Your Aluminum Patio Furniture Looking Brand New

Aluminum garden furniture has become really popular for those who have large outdoor living areas that need to be decorated and who spend a lot of time entertaining in their outdoor lounging spaces.

Aluminum patio furniture is outstanding because it is so strong, lightweight, rustproof and fashionable and the best part about it is that it is really low maintenance furniture. It’s important to know, though, that despite the fact that your aluminum patio furniture might not need too much extra care, a little bit of TLC from time to time will insure that your aluminum garden furniture will last for a really long time.

Aluminum garden furniture will come with care instructions from the manufacturer and these could differ depending on where you purchased it from and who made it. The way in which you care for your aluminum garden furniture will depend on whether the furniture is made out of extruded, wrought or cast aluminum.

There are, however, some normal tips everybody can use to take care of their aluminum patio furniture.

The easiest of cleaning instructions is to spray it over often. This is to prevent build up which may cause damage and it’s fast and easy to complete.

You should also use a mild soap that is earth friendly along with some warm water to clean your aluminum garden furniture from time to time. If the frame happens to be exposed to any type of chemical, especially those found in repellents and suntan oils and lotions, clean the frame immediately or as quickly as you can. These chemicals might cause some of the finishes on your furniture to become faded or deteriorated.

If your aluminum garden furniture picks up scuff marks, these can be removed somewhat quickly by using a light abrasive. If the scuff marks are a bit larger, you can use fine grained sand paper or even a wire brush to get rid of them.

Touch-up paint is another a good way to keep your aluminum garden furniture in perfect shape. If there is a part that needs to be touched up, buff it with a fine steel wool to improve the adhesion of the paint. After you scrubbed it with the steel wool, wipe the spot to get rid of any residue that might have been left. Now you can add thin coats of touch-up paint to your aluminum patio furniture. If you are going to apply multiple coats, allow for each coat to dry before applying a new one.

To make your aluminum patio furniture last through a long and icy cool winter, you should coat it in some oil. This is not any kind of special oil, motor oil works and cooking oil works just the same and it is environmentally friendly! When winter is complete, remember to wipe it all off. During the warm months, you can apply baby oil or mineral oil to your aluminum garden furniture to keep it looking beautiful and shiny.

Wax is another great way to keep your aluminum patio furniture in good condition – this should be applied once or twice a year.

By taking the steps above, your aluminum garden furniture will be more lasting and will give you a good life span.

Domestic Consumer Units and Circuit Protection Devices – A Glossary

Consumer Units, Circuit Protection Devices and Accessories – A Glossary

Consumer Unit

A consumer unit is the electrical device used to distribute power throughout a domestic dwelling. Acting as a safety device, protecting against injury through electrical shock, a consumer unit houses protection devices which also protect household appliances from overload.

A consumer unit’s first function is the organisation of electrical ‘circuits’, such that the different ways in which we use electricity throughout the home may be safely and more easily managed. A typical domestic installation, for example will have the following circuits: Ring main for power sockets and items like washing machines and TVs, Lighting, smoke alarms, cooker, shower etc.

Main Switch

This is the ‘Double Module’ device which sits on the far right hand side of a consumer. It usually has a big red bar switch and acts to isolate the entire board. This means that by manual operation it can cut power to every circuit in the installation. Main Switches are almost always rated at 100 amp, allowing it to isolate an installation which pulls no more than 100 amps in total across all circuits.

MCB

Mini Circuit Breaker. An MCB protects its circuit against overload. When for example a bulb blows on a lighting circuit the MCB cuts the power to the that circuit, thus protecting the other lights. No other circuits on the consumer unit have been affected. An MCB does not protect people against electric shock.

RCD

Residual Current Devices protect multiple circuits against earth leakage. This is a vital function of a consumer unit as it is earth leakage which causes electrical shock. RCDs measure the amount of electricity flowing into the consumer unit against the amount flowing out. When it detects an imbalance between the two it cuts the electricity supply to the bank of circuits it’s protecting.

It should be noted that this means that a fault on one circuit will result in a cutting of the power to any other circuit protected by that RCD. For example an RCD may protect the ring main and indoor and outdoor lighting circuits. In this instance a fault on the outdoor lighting circuit will knock out the indoor lighting and all power sockets.

It is for this reason that the 17th Edition Regulations demand ‘Division of Circuits’ to avoid ‘Nuisance Tripping’

RCBO

Residual Current Breaker with Overload (RCBO). This clever device combines the functionality of an MCB and RCD and therefore allows for independent protection on individual circuits against both overload and earth leakage.

Din Rail

The mounting rail upon which are fitted the Main Switch, RCDs, MCBs and RCBOs.

Busbar

The device which connects electrically the Main Switch, RCDs, MCBs and RCBOs.

Neutral Bar

The terminal bar which accepts all the neutral wires from the RCBOs and MCBs.

Why Installing a Stair Nosing on the Edge of Any Kind of Stair Step Edge Is a Must

The durability and the safe use of stairs have always been a concern for architects and constructors.

The stair nosing has been around since the early 20th century.

For instance if you visit the gorgeous Plaza de EspaƱa in the historic city of Sevilla in Spain please pay attention to the step edges of the stairs that direct you to the upper floor from where you get a spectacular view of the palace’s square. You will notice superb step edgings that most properly inspired today’s stair nosing designers. This superb palace was constructed in the late 1920s.

There is no doubt that you will notice diverse step edgings in several old buildings with stone, ceramic, marble or parquet overlaid stairs.

The stair nosings that are installed on the step edge of ceramic tile, marble or wood covered stairs in contemporary buildings and particularly in public ones such as shopping malls, schools, governmental institutions are subject to heavy pedestrian traffic.

Installed on the edge of the ceramic or similar stair steps the aluminium stair nosing trim is designed to provide protection to the stone, marble or ceramic tile edge on the stairs by preventing chipping and fractures. The use of the stairs is safeguarded as stair steps may become hazardous particularly when wet or worn out.

A great deal of accidents occur going down on stairs when the proper attention is not paid. Many of these accidents may result in serious injuries.

Presently several models of aluminium stair nosings are suggested for the protection and secure use of the concrete, ceramic tile, marble, stone or wood covered stairs:

Stair nosings which are installed directly over the concrete stair step edge.

Tile-in stair nosings with or without replaceable pvc insert, designed to accommodate ceramic tiles in various thicknesses. These stair nosings may only be fitted during the tile, marble or stone installation process; as the bottom of the frontal edge of the nosing should get under the ceramic tile to ensure a firm grip.

The incorporated and durable ribbed PVC strips which come in a variety of colors (i.e. black, grey, brown or cream) achieve perfect compatibility with the ceramic tile colorations and furnish improved slip resistance.

Retro fit step edges, with or without replaceable vinyl insert that are fitted after tile, stone or marble installation.

There are no other major distinctions between the two stair nosings, both serve the same purposes. Worn out stair steps not only portray an unpleasant look, but on top of that the secure use of the stairs is endangered. As a consequence this form of anti skid stair nose is a perfect choice for upgrading and renovating existing stairs in poor condition and in need of repair. The worn out stair edges would be covered up and masked.

The grooves on the upper surface of the stair nosing will add an anti slip feature assuring the safe use the stairs. The utilization of non slip stair nosing is highly recommended to protect tiles on stairs from chipping and to prevent costly and unnecessary ceramic tile installation expenses afterwards.

An aluminum stair nosing fitted at the edge of the wooden stair would prove to be highly beneficial as well. The parquet and laminate flooring stair step edges will be protected from wear and the unsightly appearance of fractured and damaged stair step edges will be avoided. Subsequently damage to stair edges and its disagreeable appearance are averted as well as high-priced renovations.

Diverse stair tread nosing profiles that can withstand extensive influx secure the use of the wood stairs, and their anti-slip ribbed top surface and the grooves create slip resistance and enable the safe use of the stairs.

Slip and fall accident risks are reduced, injuries no longer become a concern and a decorative feature perfectly fitting the stairs is provided.

The retrofit stair tread nosing may be fitted with glue, adhesive tape or rather screwed to the tile, stone, parquet or similar flooring to allow a long lasting tight grip. When supplied predrilled and with countersink holes the installation with screws will turn out to be faster and smoother.

For complementary information you may go to our website.

http://www.akteknik.net/index-eng.asp

When to Forgive Infidelity

When you are hit by the pain of infidelity it hurts. Like the wounding of a close friend it is deep and painful. Many people describe the sensation as a “knife in the back!” type of sensation. Some also report the sensation accompanied by a nauseating, burning sensation deep in the pit of their stomach. One reason for these sensations are the betrayal and lies that accompany cheating.

Although words like “cheating” and “affairs” are borrowed from the business world to mentally lessen the impact, your pain is not lessened. No matter what you call what happened, you were betrayed, you were rejected, and you were hurt. In earlier times, words from church like adultery, infidelity, pervert, and reprobate were used. Such terms are not used frequently in modern discussions of infidelity since they carried with them the associated blame and wickedness with them. Changing the words used helps soften the hurt, but does not eliminate it.

In addition to these unwanted sensations, there is also the experience of ‘disbelief’. You do not want to believe that something so distasteful could happen to you. You may not want to acknowledge what happened. You may even find yourself fighting having to admit that it happened. The affair did happen, and it happened to your marriage. You can choose not to believe it, but that does not erase what occurred.

You do not want to believe that the affair is happening. There is often a sense of the ‘unreal’ to the whole thing. You make statements like “I can’t believe this is happening! ” The stunning news of your spouse cheating often leaves you with the unpleasant and unreal sense that hangs around your head and heart for what seems like forever. It may take hours, days or even weeks before you actually accept that the cheating did happen.

Cheating rejects you. It rejects who you are and the role you are in. It sends you the message written in neon lights-“YOU ARE NOT GOOD ENOUGH! YOU ARE NOT ENOUGH! YOU ARE INADEQUATE!”

Cheating is a total rejection. The cheater rejects the life you shared, the dreams you shared, the struggles you shared and you. The hopes that you and your spouse shared have been shattered. With the shattering of those hopes, comes massive disappointment. Everything that you had hoped for and believed in is gone. With infidelity, there are many losses. Your spouse, your best friend, your future, your family and your dreams are all gone. In overcoming the infidelity, one of the issues that eventually needs to be dealt with is forgiveness.

You, like other spurned spouses may find it utterly distasteful and beyond your capacity to ever forgive the cheater. Choosing not to forgive torments you and your spouse, although over time, the one most hurt by holding that grudge is you. It may give you a temporary sense of power and control, but it brings with it a BIG price tag.

When you finally choose to grapple with forgiveness, there are often two questions to consider:

Can I ever forgive them? and When do I forgive them?.

First you have to choose whether or not you can forgive them. if you are one of those who told yourself, “There is no way I can ever forgive them for this!”, then you may find yourself experiencing problems in this area. Since your mind is programmed by you, the messages you send to yourself will determine what you can do. Telling yourself that you can NOT forgive will limit what you can do.

If you are serious about forgiveness, you will need to make the choice that you are willing to forgive.

It is helpful to remember that, forgiveness is a process. It is not a one-time event. It is not something that is done once and forever. Forgiveness occurs gradually. You forgive a little each day. Forgiveness is not approval of what they did. It is not so much about them, it is more about you choosing not to emotionally hold onto the grudge and resentment over what happened. It is about you choosing to let go of the hurt. Forgiveness can only be given and directed toward the person, NOT the event (more on that later).

Since forgiveness is a process, it is something that is on-going. This on-going process requires the forgiver to let go. You will need to let go of the pain, the desire for revenge, and resentments. Each day those resentments and hurts build up, you will need to let go of them.

After you choose to forgive, it will be convenient to find reasons to resent the cheater. You may find more reasons to resent them each day closer you get to forgiving them. This is part of the process of forgiveness.

The “letting go” involves releasing your emotional and spiritual baggage about the cheater. The letting go may likely involve issues you have towards your spouse, yourself and your God. God is often blamed when you entertain thought like “How could God allow this to happen?”, “How can God expect me to forgive them? “Remember with the cheating, it is the cheater that chose to do what they did, God did not make them do it. Blaming God for what they did will only displace your emotions and make forgiveness messier than it already is.

In some cases, forgiveness may require you let go of feelings toward friends or family members that were involved in the whole affair mess. It may not be just the cheater. It could involve their family, friends, work associates, etc.

As to when you need to forgive, there is no one size fits all answer. Since everyone deals with pain differently the answer regarding when you need to forgive varies greatly as well. The simple answer is when you are tired of holding onto the pain and grudge. When you are ready to stop hurting, then you are ready to forgive.

My own experience is that before forgiveness can occur, you need to have a clear idea of what you are forgiving. It is easier to let go of something if you have a clear idea of what you are letting go of. Some forgiveness never occurs, because it is never clear what you are forgiving them for.

Some questions to consider in the matter of forgiveness are:

  1. What is it that you are forgiving? Is it a behavior? Is it an attitude?
  2. What was done to you?
  3. Are you tired of hurting?
  4. Are you ready to let go?
  5. Is holding on to your grudges helping or hurting you?

In answering the questions, you will gain focus and clarity about what needs to be forgiven. You may stumble in forgiving since many people do not understand what it is and how it works. It is not making excuses for the person. It is not condoning what happened. Forgiveness is not pardoning.

A pardon is a legal action. Criminals can be pardoned or released from their sentence. When you forgive, you are not legally put your stamp of approval on what they did.

Forgiveness involves emotional and spiritual concerns. You can forgive, yet still hold the other party accountable in a legal sense for their betrayal of you and your marriage. You can hold them accountable for the lies, secrets and exposing you to communicable diseases.

Another stumbling block concerns grudges. Oddly enough, some people have magical thinking regarding holding onto their grudges. It is as if you are holding onto a mental voodoo doll and use the memories of what occurred to wish ill on the offender. You somehow believe that holding the grudge gives you power or control over the other person. With grudges you do not want to forgive now since it would involve surrendering the magic power you think you have over the offending spouse. Grudges do not work that way. Instead, grudges do just the opposite, controlling those holding onto the grudge.

Another common mistake is forgiving too soon. When you forgive before there is a clear idea of what is being forgiven, there is a risk of free-floating resentments. Forgiveness can occur without knowing all the minute details of the affair. Many times people have to forgive before they can grasp what happened from all the perspectives involved.

Forgiving too soon does not allow for the other spouse to be held accountable. When you forgive prematurely, the guilt, which often serves as a motivation to bring about changes, is suddenly dissipated. The forgiven person no longer feels a sense of remorse or need to correct things. The cheater wrongly assumes that once they have been forgiven the whole affair episode is concluded. Forgiveness does not mean the cheating episode is closed by any means. Forgiveness only stops the emotional bleeding, not repairing the trust or damage that was done.

When you forgive too soon, the issues leading to the cheating are often not dealt with. The forgiveness reduces the pain level, but does not repair the relationship. The error is made assuming that when the pain is gone, the affair is settled. Before the relationship is healed, the damage will need to be repaired and the intimacy restored. Premature forgiveness often keeps a façade of intimacy, when the reality is that the couple does not feel close to each other, they are just terrified of being abandoned, and take steps to avoid those sensations.

You may find yourself making excuses to not forgive the infidelity. The only way to overcome those excuses is to confront them when you see them. I have listed out the ten most common excuses for not forgiving.

  1. If I forgive them they will only do it again.
  2. They were not truly sorry
  3. They never asked for forgiveness
  4. I don’t like them
  5. They did it on purpose
  6. If I forgive, I’ll have to be nice to them
  7. Someone has to punish them for what they did
  8. They aren’t sorry for what they did
  9. They are just going to do it again
  10. I was hurt too much to forgive

The simple answer to “When should I forgive?” is when you have a clear idea of what you are letting go of, and you are tired of hurting.

The decision point needs to be with you. The priority needs to be set by you in terms of choosing to let go of the pain and emotional baggage. When you do forgive, DO NOT tell the cheater you forgave them unless they ask. Telling them that you forgive them before they ask often comes across as a put down and lets off pressure prematurely. You need the pressure in the relationship in order to drive them to make changes.

You may have put off forgiving, hoping and waiting for the cheater to ask for forgiveness. When they do ask for forgiveness, make sure that their actions and talk are in agreement. True repentance of wrong doing is needed. True repentance is showing that they repent of what they did both in word and deed. Look for changes in how they talk and how they behave.

You may desperately want to hear that they are ‘sorry’ and regret what they have done. If they are only giving you lip service, it is merely an incomplete repentance. They are doing what they think will reduce the tension in the relationship between the two of you. In cases where they are truly repentant, you will see it in what they say and what they do. There should be a difference in how they talk to you and how they treat you.

If you fall for the lip service only repentance, you are being manipulated. Cheater often know what to say and how to ‘charm’ people with their ways. They may be using those skills on you. They told the lover all kinds of lies as well. They led the lover to believe in something that was untrue as well.

It will be nice if they ask for forgiveness and show repentance of their actions in word and deed. This may or may not happen prior to the time that you choose to forgive them. If you choose not to forgive them when they ask, it does not make you a bad person. You may need some extra time to sort through everything that has happened and what you are feeling.

Sweet Trivia Question And Answer

1. Chocolate is made from cocoa beans. But where do cocoa beans grow?

A. On trees

B. On bushes

C. On vines

D. On roots

A. On trees

TOPICS: Cocoa beans come from cacao trees that grow in tropical regions of the world

2. During World War II, production of Hershey’s Kisses was halted. Do you know why?

A. Chocolate shortage

B. Sugar shortage

C. Aluminum foil shortage

D. Hershey’s produced rations instead of candy during the war

C. Aluminum foil shortage

TOPICS: During World War II, production of Hershey’s Kisses was halted. Not because of a shortage of chocolate, but because the signature aluminum foil packaging was rationed.

3. Where could the babe that the Baby Ruth candy bar was named for be found at the time?

A. Yankee Stadium

B. Hollywood

C. Broadway

D. Washington, D.C.

D. Washington, D.C.

TOPICS: The Baby Ruth was named after the first child born in the White House – Ruth – who was born to President Grover Cleveland in 1891 and later died in 1904. The candy manufacturer strongly denies any association with the famous Yankee.

4. What candy bar was included in U.S. solders’ rations during World War II?

A. PayDay

B. Heath Bar

C. Snickers

D. Twix

B. Heath Bar

TOPICS: Heath bars were included in U.S. soldiers’ rations during World War II because they had been found to have a very long shelf life. Originally marketed as a health food, the Heath bar was advertising as using only the finest ingredients. One early ad read: “Heath for better health!”

5. Where was milk chocolate invented?

A. England

B. America

C. Switzerland

D. France

C. Switzerland

TOPICS: A Swiss chocolate maker, Daniel Peter, mixes Henri Nestle’s condensed milk with chocolate and the two men found a company to manufacture the first milk chocolate.

6. What candy bar was originally packaged to include three separate pieces of candy flavored vanilla, chocolate, and strawberry?

A. Twix

B. Mounds

C. Mars

D. 3 Musketeers

D. 3 Musketeers

TOPICS: When it was first introduced in 1932, the 3 Musketeers bar was packaged to include three separate pieces of candy flavored vanilla, chocolate and strawberry — thus the name THREE Musketeers. Causing some confusion to tourists worldwide, the 3 Musketeers bar is called a Milky Way in European countries, and the U.S. version of the Milky Way is called a Mars Bar.

7. Aztec emperor Montezuma drank 50 golden goblets of hot chocolate every day. What special flavoring did he add?

A. Vanilla

B. Coffee

C. Chili pepper

D. Blood

C. Chili pepper

TOPICS: It was thick, dyed red and flavored with chili peppers.

8. Where do Hershey’s Kisses get their name?

A. Their inventor

B. Their flavor

C. Their shape

D. Their sound

D. Their sound

TOPICS: Hershey’s Kisses get their name from the sound and motion of the machines that produce them. It looks and sounds as if the machine is kissing the conveyor belt as it moves along.

9. What flavor is the oldest gum still available today?

A. Licorice

B. Cherry

C. Spearmint

D. Clove

A. Licorice

TOPICS: The oldest gum still available is licorice-flavored Blackjack Chewing Gum. It was first introduced in 1872 and was the first flavored gum in the United States.

10. What candy bar was named after its inventor’s family horse?

A. Twix

B. Pay Day

C. Snickers

D. Almond Joy

C. Snickers

TOPICS: Originally introduced in 1929 by Frank and Ethel Mars, the Snickers bar was named after their family horse. The original Snickers bars were sold for a nickel and consisted primarily of chocolate, peanuts and caramel.

Ten Things You Should Know About Pet Lizards

If you are about to obtain your first pet lizard, congratulations. Lizards are, in my view, the most wonderful, fascinating and beautiful creatures on Earth. Part of their appeal is their incredible diversity; there are more species of lizards than all the mammals or amphibians, and they range from three-inch legless burrowers to the mighty 200-pound Komodo dragon. Some are coloured with somber tans and ochre, and others rival the most ostentatious of butterflies with gaudy green, red, and yellow markings. Some glide on fragile wings, some run across the water, and some can stick to ceilings. With my sincere apology to Samuel Johnson, it is my opinion that “when a man gets tired of lizards, he is tired of life”!

That said, here are ten valuable guidelines to help you and your lizard get off to a good start, and stay on a safe and happy course. I speak with a wee bit of experience, having kept lizards since 1961, and going on to spending over 30 years as a professional herpetologist. These tips are just a starting point, but they cover ten really important points!

1) Start by getting a lizard that is easy to care for! Many lizards are very demanding in captivity, and those should be left to experienced keepers. Among the best starter lizards are the Australian bearded dragon and blue-tongue skinks, which grow to a total length near 13-inches. They do not become stressed when properly handled, are generally tame, and eat a wide variety of foods, from fruits, vegetables and flowers to insects, moist dog food and small mice. Savanna monitors are also good for beginners, but get a young specimen and raise it to adult size; freshly imported adults may be aggressive, but captive bred/raised specimens are excellent animals for beginner keepers.

2) Avoid getting a species that people think of as “pets” but are really very challenging to keep properly. Among those species to avoid: iguanas, Nile monitors, chameleons, and small species that grow to only 3 – 8 inches in length.

3) Read up about your lizard, because there is no excuse for doing a poor job as its keeper. For books, you can consult Bibliomania! at http://www.herplit.com, one of the largest reptile book dealers in existence. Then subscribe to one of the magazines published for reptile keepers, which include REPTILES (www.reptilechannel.com/rmrc_portal.aspx), REPTILIA (www.reptilia.net/html_english/inter-print2.html), REPTILES AUSTRALIA (www.reptilesaustralia.com.au/), and Britain publishes REPTILE CARE (www.reptilecareuk.com/index.php?option=com_content&task=view&id=10&Itemid=11).

4) Remember that lizards and snakes are very closely related groups of animals, but lizards need very different care. Unlike snakes that may need food only once a week or month, lizards usually need to eat every day, and sometimes more than once per day. But do not leave rotting or dirty food in the terrarium, because it could be contaminated with germs and cause your lizard to become sick.

5) Do not grab or hold a lizard by the tail. Even though the tail of a bearded dragon, blue-tongue skink, or savanna monitor will not break off, it is uncomfortable for the lizard. Get used to holding the lizard by putting your hand under its belly and supporting its weight from below.

6) Never use your lizard to frighten anyone! Strange as it may sound, some people are afraid of reptiles, and that kind of fear has led to many laws and regulations being passed that make owning reptiles in some places difficult. It is much better for the lizards – and the rest of us keepers – if you use your lizard to help teach other people how wonderful they really are!

7) Never release an unwanted pet reptile into the wild. Most pets are from other continents and will not live long where you live. It is also possible, especially in a place like Florida, that the released pet will do well and, if many such pets have been released, found a colony of foreign animals. This is not good for the local wildlife and really upsets conservationists and Fish and Wildlife officials.

8) All diurnal (active during the daytime) lizards need some ultraviolet light in their lives. But UV light does not penetrate glass, so it doesn’t help to put a terrarium near a window. In addition to a heat light (all lizards need a temperature of at least 78 degrees F, many much more), you will need a good full-spectrum UV light. These are now produced to fit in either a screw-in socket or a standard fluorescent tube socket. For examples of excellent products check the Zoo Med website at http://www.zoomed.com.

9) Always be sure your lizard has access to fresh, clean water! Some lizards only drink dew drops from leaves, but these species are not among the beginner’s species. Even desert lizards – and that includes all of the beginner species I’ve listed – can and will drink from a dish, and even enjoy soaking if the dish is large enough. Soaking also makes skin shedding easier for your lizards.

10) Do not crowd your lizard. If you are getting two lizards to start with, make them both the same species, preferably one of each sex, about the same size, and house them in a terrarium that is large enough. Overcrowded lizards become stressed and may refuse to eat. They are also more likely to catch an illness. If you cannot offer enough space, do not get the lizard. Period.

BONUS TIP 1) A fourth excellent starter lizard is the leopard gecko, a delicate and very popular nocturnal species that has been bred into many colour morphs (it’s something like the lizard keeper’s equivalent of the guppy!). Unlike the other starter species I mentioned, leopard geckos are smaller (to about 6 inches), have soft, delicate skin, and have tails that are easily broken. Yes, they grow back, but only as stiff rods that never look as good as the original. They also require more gentle handling than the larger starter species. They do not need UV light, but they still need a warm terrarium (70 – 78 degrees at night, 78 -95 degrees by day), sandy soil, and places they can hide. Feed them live insects, especially crickets, young roaches, and wax worms.

BONUS TIP 2) Do not use heat rocks to keep diurnal lizards warm! The lizards are, frankly, not “wired” to know that their bellies are actually cooking, and they may stay on the rock until badly injured or dead! Leopard geckos, however, will be fine with a heat rock or two.

Other things that you should know include washing your hands well after handling your lizards, do not tease or annoy the animals, and be sure to keep the terrarium clean.