Antique Chandeliers

Chandeliers conjure visions of royalty, grandeur and opulence. Though sleeker and slimmer versions have evolved, there’s still an aura of antiquity that surrounds a chandelier. So when one is striving for an antique look for his home, going in for turn-of-the-century furniture, a decadent looking fireplace and a chandelier are the first things on his mind.

Chandeliers conjure visions of royalty, grandeur and opulence. Though sleeker and slimmer versions have evolved, there’s still an aura of antiquity that surrounds a chandelier. So when one is striving for an antique look for his home, going in for turn-of-the-century furniture, a decadent looking fireplace and a chandelier are the first things on his mind.

If you are one of the lucky ones who possess an old chandelier handed down to you through generations, then you wouldn’t need to lift a finger. For the not so lucky ones, you would need to hunt for a piece that would look convincingly old. Shops selling antique pieces would definitely be your first stop. For nothing can really replicate that old look better than a piece actually made years back. But if they cannot satisfy you, you have no other choice but to get a ready-made variety and try to give it an old look.

First, steer clear of the slim-trim polished-steel chandeliers. These are especially designed for modern homes with clean-cut furniture and can never be passed off as old. Antique chandeliers are ornate pieces with very intricate carvings.

Candle chandeliers have an inherent archaic feel to them. An antique chandelier can be made of crystal, wrought iron, or brass or antlers, and they are never shiny in appearance. That is why you just cannot buy a wrought-iron or a brass type of chandelier and install it, hoping that it would impart an antique look to the environs. The chandelier must be worked upon so that there is an authentic antique feel to it. To replicate an old look, you need to apply an antiquing glaze on it. While the glaze is still wet, you need to rub off the shine from it with a soft cloth. The latter is done to achieve a worn-out look.

After working on the chandelier, it is also important o have the other furniture catered to the antique look. For a single antique or antique-looking chandelier cannot bring about an antique feel in the ambience. A chandelier will look antique only when there’s an antique atmosphere around it.

Winter Repairs You Shouldn’t Pass Over

Just as we get out the sweaters, hats and boots as winter approaches, it’s also time to prepare our homes for the cold months ahead. Here’s a list of some of the must-do repairs, preventative maintenance and general “batten down the hatches” projects that you need to do before the snow flies.

Furnace Inspection and Cleaning:

It’s a good idea to have your furnace professionally inspected and cleaned every year. This will not only keep your furnace in top working condition but it can also prevent a hazardous buildup of carbon monoxide. A malfunctioning furnace can also stop working and cause water pipes to freeze and burst leaving you with not only no heat but the added expense of thousands of dollars in water damage.

One thing you can easily do yourself is to change the furnace filter. Do this every fall before going into the heating season and as often as recommended by your furnace manufacturer or as listed on the specific filter you use. If you have pets, the furnace filter will collect a lot of pet hair on the outside causing the filter to work less efficiently, so make sure you check it often and change the filter frequently.

Roof and Gutter Inspection:

The average shingle roof lasts about 15 to 20 years. Over that time it can be damaged by wind, ice and ultraviolet rays from the sun. If you’re competent with a ladder, you can do this yourself. Check for any missing or lifted shingles. Also check the flashing around the chimney and any vents. While you’re up there, make sure there are no bird nests in the chimney and clean the leaves and other debris from the gutters. Make certain all the brackets are secure so the gutters won’t be pulled down by heavy rains or ice.

If you’re not able to get on the roof yourself, you should call a professional roofer to inspect your roof for you. They usually provide services such as chalking around chimneys and cleaning gutters if you should need those things done.

Put up Storm Windows and Replace Old Weather Stripping:

If you live in the colder climates you may have the newer double pane insulated windows but if you have older style windows you may need to put up storm windows every fall. You should also check all the weather stripping around doors and windows. Replace any old, loose or cracked stripping. The rubber strip on the door sweep can also wear out from use and should be replaced every few years.

Drain Outdoor Water Pipes that Might Freeze:

Drain and clean outdoor fountains, garden hoses and faucets. You can usually turn off the water to an outside faucet in the basement and drain the pipe through a tiny plug in the pipe. This may not seem important but an outdoor faucet can cause the pipe to freeze and burst and flood your basement. This can damage your heating system, hot water tank and everything else you have in your basement. So as small as this may seem, you definitely don’t want to forget to drain the outside faucets.

Your specific pre-winter repairs will, of course, depend on the climate where you live. If you’re fortunate enough to live in an area where winters are always mild, you may not even have to think about preparing your home for winter. On the other hand if you live in the colder northern states, you’ll have a lot of winterization projects to take care of every year. It’s simply part of the price we pay for maintaining the homes we love.

Watch Your Back When Shoveling Snow!

Watch your back when you shovel snow, you don’t want to end up in bed as the cost a clean snow free driveway.

The first winter storm has moved across the northern states. It’s only a few inches of snow so you break out your show shovel. Snow shoveling can easily cause muscle strain to your lower back. Many early season snow storms dump snow that is laden with moisture so 2-4 inches of wet snow is heavier that a late season storm that dumps twice as much snow that contains less moisture. So govern your activity accordingly and use good technique to avoid lower back pain.

If you are out of condition you could be shoveling toward back trouble. Another cause of problems leading to lower back pain is to not use proper technique in handling the snow. Here are some ideas that should keep you from having difficulties with your back after shoveling snow:

To avoid back injuries, start slow. If you have a stationary bike ride a mile or two to get completely warmed up before you pick up the snow shovel. Another tip is to wait until later in the day as you are less likely to slip a disk in the afternoon or evening than early in the morning after the body has been at rest all night.

Start by lifting smaller loads of snow. Gradually build up and warm up your muscles before you load up the shovel. Bend with your knees and lift with your legs rather than your back.

When turning move both feet, don’t twist your body to move and throw the snow. Don’t bend your body forward and bend your back. To reduce fatigue step in the direction you’re throwing the snow.

Before you become fatigued take frequent breaks. One technique that is effective is to place you hands on the back of your hips and bend backwards slightly for several seconds.

Be sure you have a properly designed snow shovel. If the shovel is too short it will cause your back to bend more and you are more likely to experience back pain. A snow shovel that had too long a handle makes the weight of the snow feel heavier and will also cause fatigue and a possible backache.

The other factor is the size of the scoop of the shovel. To large and you may have a tendency to load it up with snow and the sheer repetitive weight could cause problems with your back.

If you get through the first snow storm with only tired and sore muscles, consider yourself fortunate. Perhaps it’s time to start regular workouts to minimize future back problems. Or you could hire a neighborhood teenager to shovel the snow off your driveway and sidewalks.

How To Choose A Lift Chair

Parkinson’s, Lou Gehrig’s, arthritis and other mobility limiting conditions trouble your loved ones. Being in one of these situations trouble them. It makes them feel useless and dependent on other people. They also sense that they have lost their vigor and free will. As a result they pity themselves.

In today’s modern world, mobility is an advantage. Thus, to bring confidence back to your loved one’s being, give them something that can help them live a life even with their disability or limitations. A quality  lift  chair for one is a great aid.

People who are suffering from knee and hip problems brought about by accidents, muscular weakness and other disabilities also need a  lift  chair. A  lift  chair can help them get up from a sitting position and back. Having a  lift  chair around gives them the opportunity to enjoy a normal life.

Caregivers, on the other hand, use  lift  chairs in order to take their patients in and out of their seats. An automatic  lift  chair can help them carry out their job easily and effectively. Said  lift  chair will also benefit the patients. The usual way of carrying them might give them sore. In using a  lift  chair, they will not likely get it.

 Lift  chairs come in different colors, styles, features and functions. A first sight, a  lift  chair may bear a resemblance to normal upholstered chairs. It may look like a recliner, couch, sofa or an ordinary chair.

With the wide-selection of  lift  chairs available in the market today, perhaps your next query is how to choose the right  lift  chair? To help you decide, here are some of the pointers that you can consider:

1. Consider the would-be user. When you are purchasing something for a person, think of his needs and wants. Choose the most appropriate thing that will best benefit him.

In connection with  lift  chairs, consider whether the would-be user needs an automatic  lift  chair or not. Ask yourself: Is his condition critical to necessitate subtle materials and powerful equipments?

Can a  lift  chair carry his weight? Be sure that these queries are answered. Most chairs carry 375lbs to 450lbs.

Moreover, good knowledge and familiarity with the patient is a must to attain a good purchasing decision.

2. Examine the materials. The materials of the chair should also be considered. Patients may have sensitive skin and fabric and fur can cause them skin irritations. Leather, on the other hand, can give them unfavorable skin conditions.

3. The measurement of the chair matters. The size and height of the  lift  chair must match its user. If the chair is too small or too huge, the user will likely feel uncomfortable. Seat depth and width is are also vital to user’s comfort.

4. Convenience. Convenience is one reason why you are purchasing this kind of chair. Thus, convenience must be attained.

If need be, you can purchase an automatic, 2 or 3 position, plugged or battery-operated  lift  chairs. There are also manufacturers that incorporate massage units and heating apparatus. You can install them too.

5. Fair Warranty. Most manufacturers give a 3 to 4 year warranty to the chair’s parts. Be sure to have them so that it will be easy for you to replace the chair if it turns out to be defective or unsatisfactory.

6. Price. Never sacrifice quality over price. Nonetheless, if you can get a quality  lift  chair at an affordable price, it will be better.

 Lift  chairs are invented to make life a little easier. Take advantage of them!

Elevators Advantages

To begin with, the idea of  elevators  was back in the BC’s when Archimedes built his first  elevator  in 236BC. Along from then  elevators  are considered to be a transport vehicle which moves in vertical direction carrying people or goods between floors in the building its installed in. These  elevators  are powered by AC/DC motors which drive the cables which helps the  elevator  cab to move up and down in the vertical direction.  Elevators  help in speedy transport of goods, people etc. Not only this but  elevators  like panoramic can add classy touch to a building.  Elevators  Manufacturers are the best makers and suppliers of  elevators  for a long time. We use top quality materials in the making of these machines and hence you can expect them to run efficiently for many many years. The  elevator  doors are another important characteristic of an  elevator , the door avoids people or goods from falling off the cab into the shaft.

Doors to  elevators  are off many types too- collapsible, 2 panels meeting in the middle or slide open doors. Many types of  elevators  have come into existence these days.. Hydraulic  elevators , passenger  elevators  – which only carries people, stage lifts- used to lift the stages for transport between orchestras, residential- installed in homes to help the aged and the physically challenged, dumb-waiters- used in the restaurants and lodges to move food and laundry, many more.. Some of the controls in an  elevator  are over-load sensors which indicate when the carrying capacity of the  elevator  is exceeded. Electric fan- to keep up the circulation of fresh air and comfort of the people inside.

The door on the floors outside the  elevator  doors to stop the others from different floors to enter the  elevator  at their own will. An alarm button to signal the people monitoring in case of emergency. Hold button to keep the doors from not closing in case you await somebody. Call canceling- to cancel the floor you want to reach in case you tap it by mistake, tapping it again would cancel the call. Telephone- to help reach your family or friends in case you’re trapped inside and there is no aid. A security camera- to monitor the movement of people in the  elevator . Several  Elevators  Manufacturers offer all this and more.  Elevators  are very efficient when installed by the right people and monitored properly.

Finding the Perfect Personalised Plate

There is a significantly growing trend of drivers up and down the country splashing out to secure a lavish personalised plate for their motor vehicles. These items are no longer strictly for the elitist, with a great range of opportunities for the everyday driver to purchase a personalised plate that says something about their character, personality and lifestyle.

A personalised plate is a combination of letters and numbers that often reveals a message or name that is special or relevant to its owner. Whether you want to personalise your plate to show your own name or initials off or to show passion and affection towards a loved one, a customised plate can make the perfect statement in the fashion, consumer-conscious world that we live in.

So how do you find the perfect personalised plate for your car? It is not quite as simple as pulling a group of letters and numbers together to submit for registration. All formal personalised number plates must follow a strict format set by the DVLA. Number plates follow the pattern of letters followed by numbers or numbers followed by letters. It appears more desirable for drivers to purchase a personal plate with the lettering format first, but beware, these do come with a heftier price tag.

The latest release of number plates is due in December, with the demand for customised plates hotting up in time for the festive period. The DVLA seeks to recoup over £80M from next year’s registration sales with the company revealing it has already received hundreds of enquiries for the 2010 format.

There is a simple way in which you can search for the perfect personal plate. Plate Master boasts an extensive plate search engine that enables drivers to match personalised combinations with their full name and any other words. Why not treat yourself or that special someone to an exclusive personalised plate.

How to Install a Wood Stove

“There are a number of factors that must be taken into account when installing a wood  stove . It is important to make sure that the  stove  is set on a proper type of flooring. Wood  stoves  must have a stovepipe or chimney that channels smoke or exhaust outside. Finally, wood  stoves  must be a safe distance from all walls made of combustible material. Wood  stove  installation is a complicated process. It is usually a good idea to hire a professional for wood  stove  installation.

The first step of wood  stove  installation is to find a proper place for the  stove . It is vital that the  stove  is not placed on flammable or combustible material like carpet or hardwood. Materials like ceramic tile and concrete are much better options since they do not catch fire easily. The law states that the  stove  must be placed in an area with at least 12 inches of acceptable material surrounding all sides of the  stove  except for the side used to load the wood, which must extend for 18 inches. This insures that it will not be possible for any sparks to land on wood or carpet and start a fire.

Not only should the wood  stove  be placed on appropriate flooring, it should not be closer than twelve inches from any combustible wall. The  stove  can be placed closer, if the wall is covered with a flame-resistant shield.

The stovepipe is one of the most important parts of a wood  stove . The stovepipe should be made of double wall steel. This means that there is a larger stovepipe at least two inches larger around the pipe carrying the smoke. The stovepipe should not be closer than nine inches to an unprotected wall, and it should not pass through any combustible materials through the roof.

Wood  stove  installation is a complicated, time-consuming process. There are a number of trained installation experts who can save  stove  owners the trouble of installing it themselves.”

Basic Slow Cooker Tips and Delectable Roast Beef Recipes

Slow cookers or crock pots are countertop electrical cooking appliances that maintain a low temperature for several hours. This enables cooking stew or pot roast without the need to check on it from time to time.

Amateur cooks will find it very easy to handle and maintain. All you need to do is to fill it up, and then turn it on. After several hours, dinner can be served. However, when using the slow cooker, there are some things you need to consider. It is best to get one that has a removable liner, making it very easy to clean. If you already have one with a non-removable liner, you can just use a cooking bag; then, use cooking spray on the inner liner.

Make sure you only fill your slow cooker ½ up to 2/3 full. The food will not be cooked properly if filled to the brim. However, if the liquid and food level is a bit lower, it will cook quickly.

You will find that the food along the bottom part of the slow cooker are moister and become cooked faster. This is because they are continuously immersed inside the simmering liquid. Since fats have a tendency to melt and cook easily when heated for a long time, resulting to an unpleasant texture, it is best to trim the excess fat formed and remove the skin from poultry.

During the last 30 minutes of cooking time, you can remove the lid and cook it on high to thicken the juices and add more flavors. It is best to cook on High during the 1st hour of cooking so that the temperature would easily reach 140 degrees, ensuring food safety. When you are almost done with your cooking, you can turn the dial to Low.

Do not place frozen foods inside your slow cooker. It should be defrosted first before cooking it. This way the temperature would easily reach 140 degrees. It also protects the appliance from being damaged.

Use cheaper cuts of meat because this requires about 8 hours of low cooking. Aside from being able to save money, they have less fat, moist and they result to more tender meats.

Ground meat should be cooked inside a skillet prior to cooking it in the slow cooker. If you will be cooking seafood in a slow cooker, this should be added in the last hour of cooking; otherwise, it will become overcooked and it will showcase a rubbery texture. Take note, 1 hour on high setting is actually equal to 2 hours on low setting.

Only use small amounts of Tabasco sauce and cayenne pepper because they become bitter when they are cooked for a long time. It is best to add them during the end of your cooking time.

Make sure you only add tender vegetables such as mushrooms, tomatoes and zucchini on the last 45 mins. of cooking time. This way, you will not overcook them.

Dairy products, on the other hand, must be added only during the last 30 minutes of cooking time.

Prior to storage, take out cooked food from the slow cooker or liner. Since the slow cooker’s liner is composed of thick material, cooked food will not be able to cool down quickly so as to prevent the growth of bacteria.

Only stir in spices during the last hour of cooking time. If you cook this for a long time, it will lose its flavor.

Carefully follow the layering instructions. Since vegetables are not cooked as easily as meat, you need to place them in the bottom of your slow cooker.

If you are using low temperature, do not lift the lid when you stir. This is because the heat will escape and extend the cooking time to 30 minutes more. You can check the cooking progress by spinning the cover so that the condensation would fall off, giving you a chance to look inside your slow cooker.

Here are some of the best Roast Beef Recipes you can cook with your slow cooker:

Roast Beef a la Mushroom Soup

Ingredients are 1 can of Cream of Mushroom Soup, small to medium shoulder or chuck of beef roast, 1 can of French Onion Soup, a dash of pepper and ½ can of water (for cleaning the soup can).


Place the first 3 ingredients inside your slow cooker. Mix the ingredients until thoroughly blended. Sprinkle a dash of pepper. Put the settings on Low and allow cooking for the entire night. The next day, remove the meat and prepare your gravy. If your gravy seems too thin, add about 1 to 2 tsp. of cornstarch with ¼ cups of cold water. Set the cooker on high. Stir in the mixture to thicken and serve.

Roast Beef with Gravy

Ingredients are olive oil, 3 to 3 ½ pounds Boneless Rump Roast, 8 garlic slivers, salt and pepper. You will also need a meat thermometer. For the gravy, you will need some beef stock or red wine and corn starch.


One hour prior to cooking remove the roast from the refrigerator at put it in room temperature.

Using a sharp knife, you need to cut about eight small incisions around your roast. You will place one sliver of garlic on each incision. Place one tablespoon of olive oil around your roast and then sprinkle it with salt and pepper. Put your roast on the oven rack with the fatty side up and a drip pan over a rack under the roasting rack. This way, you will not be required to turn the roast.

Brown your roast at 375oF for 30 minutes. Then, put it on 225oF. It would still 2 to 3 hours to cook but if it starts to drip and is already brown externally, use your meat thermometer to check its temperature. After this, pull your roast from the oven once the temperature reaches 135 to 140oF. Place it on an aluminum foil for about 15 minutes and carve to serve.

For the gravy:

Take out the dripping pan from the oven. Place it on the stove top while it is on medium heat. Collect the drippings, add water, beef stock or red wine. This will loosen the drippings off the pan. Then, dissolve one tablespon of cornstarch with water and add this on the drip pan. Stir it quickly as the gravy thickens. You can also add some butter, salt and pepper. Aside from this, you can also add some fresh thyme.

Paper or Plastic?

My own, thank you. I bought my first reusable grocery bags in the 1983. I still have them, and use them too. They are rainbow colored string bags — rainbow in that one’s hot pink, another is teal, and another purple. I also have natural colored ones. Add to that starting collection various canvas and recycled woven plastic and I have a most impressive shopping collection of bags.

When I don’t have a grocery bag with me I have to face the question, the dilemma even, of paper or plastic. I see, and am swayed by, both sides of the argument. Some days I hate that!

Here are the pros and cons of each, from my perspective:



  • they can be strong, meaning many reuses
  • they are moisture-proof, holding moisture in, or out, as appropriate
  • they are reusable for grocery shopping
  • they can be reused for collecting cat litter, or dog poop
  • they have handles to make carrying stuff easier


  • generally requires petroleum for production
  • manufacturing process is polluting
  • doesn’t decompose (quickly)
  • hard to digest (for wildlife)
  • don’t reuse well
  • easily swallowed
  • suffocates kids and pets



  • compost easily
  • don’t suffocate children or pets
  • recyclable
  • ripen fruit
  • reusable for wrapping packages and gifts
  • can have handles to aid carrying


  • manufacturing process is polluting
  • don’t hold moisture, in or out
  • rip easily, usually at the most inconvenient time
  • paper cuts
  • limited number of reuses

What it comes down to for me, when I need a shopping bag is make the decision based on which resource I need. I have now added a mesh grocery bag to my suitcase and have a nylon bag in my car to reduce the number of times I have to make this choice.

The pros of a durable grocery bag include:

  • numerous reuses
  • long lasting
  • hold moisture in or out
  • don’t endanger children or pets
  • handles make them easy to carry
  • expandable so can carry lots of product

Randy has slowly moved more and more toward the no-paper/no-plastic side. I gave him several reusable grocery bags for Christmas several years ago, hoping to influence him and make it easier for him to quit using plastic bags. That didn’t work as well as I would have liked, but over time he has remembered to take the reusable bags into the grocery store with him, and even got a couple of more so he always has enough when he buys groceries.

I think that grocery stores should charge customers for every bag they use, like they do in Europe. When I went to Europe for the first time my sister warned me we’d be charged at the grocery store for not having our own bag. I instantly loved the idea and have hoped since then the US would adopt that same approach. That’s why I bought my string bags back in 1983 — to relive my French shopping experience and to green that portion of my life.

Now I want us to start reusing plastic produce bags to get greener.

The Exercise Ball Plank

You can read all you want about doing exercises and how it will benefit your help. Ultimately, reading isn’t going to do anything for you. You need to start doing. This is one excellent exercise you can start doing.

This exercise should remind you of the standard plank. This is where the trainee is on their elbows and toes and holds their body straight in form. This exercise works the core muscles. Those that have done the standard plank or have excellent balance will find this to be an excellent exercise. However, it is encouraged to anyone who wants to try it out.

To begin, place your feet next to each other on the exercise ball. You will be facing the ground. Now, set your arms up by bending them at the elbows and placing them directly below your shoulders. This should form a 90 degree angle. Next, bring or suck in your stomach. This firms up the stomach. Keep your back straight so that you do not have an arch or bow. All that is left is to hold this position for the time frame you designate.

The recommendations are to start with 3 sets which each set you will be holding the position for 15-30 seconds. A 30-45 second rest between sets is recommended as well. As this becomes easier, increase the time of the hold and number of sets done. You will benefit most from this exercise by incorporating it at least 2-3 times a week into your routine.

Again, this is not a very easy exercise to do. This requires to have some balance. Beginner users may benefit more from starting with the regular plank. Both are excellent. Adding a ball just adds a little more complexity and helps keep your routine fresh.

The ball plank is a great exercise to work your core muscles. When doing these exercises, it is recommended to do other core exercises around them. Also, be sure to stay healthy by warming, stretching and than cooling down, stretching. Also, be sure to stay hydrated. Doing so will allow you do to more while doing exercises more often which will lead to getting into shape faster.

Exercising will allow you to not only look better but you will also feel healthier. While doing this ball plank exercise, be sure to accompany it and your routine with a healthy diet as well. Remember, a diet should consist of more than just one food group.

Why Does Your Business Need a Good Marketing Plan?

A marketing  plan  is a written document that details the necessary actions to achieve one or more marketing objectives. It is meant to be a structured way of dealing with marketing issues, not a random collection of incomprehensible bits and pieces. It should be a key component of a business  plan  and is essential to  planning  the overall direction that you want your business to take. A marketing  plan  is not something that you write and then forget. It needs to be followed, monitored and updated. You want to regularly evaluate a your  plan  to make sure you are reaching the goals you set.

Marketing  plan  objectives are typically on the level of sales, profit, return on investment or, for larger businesses, market share. Marketing is a function of business and has many dimensions, including market research, customer service, advertising, targeting, packaging, pricing, e-marketing, and others. Marketing  plans , even those created within a small company, can vary in scope, format, length, and level of detail they do however typically include similar types of information.

Developing a good marketing  plan  is essential to the success of any business because you need to get everyone focused on the same issues and that’s what your  plan  should do. You need to customize your  plan  to suit your business and its objectives. It needs to be simple and to the point. In it you want to state your marketing objectives and do so in a way that your goals are very clear for everyone that might be involved with accomplishing the  plan  itself. Your marketing strategy needs to be clearly defined. It’s your  plan  of action for achieving each of your goals.

Marketing Actions are the tactics you  plan  to use to give your  plan  a life of its own. Developing a solid marketing strategy is the foundation of a well-written marketing  plan  and must be carefully considered before committing to it.

While a marketing  plan  contains a list of actions, If it does not have a sound strategic foundation it is of little use. The objectives in your marketing  plan  need to state just where the company intends to be; at some specific time in the future. The marketing objectives must usually be based, above all, on the organization’s financial objectives. If the marketing  plan  is to work, every exception to it must be questioned. Before you deviate from your  plan  you need to ask why you should do so. During the course of the year the lessons learned need to be documented so that they can be incorporated into the next year’s  plan .

A marketing  plan  for a small business typically includes descriptions of direct competitors that are marketing similar products. What the level of demand for the product or service is. A description of the product or service, including special features. What your marketing budget is, including the advertising and promotional  plan . A description of the business location, including the advantages and disadvantages of your location. And what your pricing strategy is going to be. A marketing  plan  is, after all, a structured way of dealing with marketing issues, not a random collection of incomprehensible bits and pieces.

This kind of balanced view is important to show risks are being recognized. Like a business  plan , a marketing  plan  is an essential guide. Some business owners don’t understand the value of a good  plan . Every start-up venture and existing business needs a business  plan , yet many entrepreneurs don’t realize a marketing  plan  is equally vital to your business success. A marketing  plan  is required if you want your business to become a household name. It  plan  provides structure to the marketing efforts of your business.

How to Determine the Right Handrails to Use

You may have noticed in the places you’ve been to the different issues concerning  handrails . You may have complained in some instances that certain  handrails  you used were too big and hard to grasp. Or you may have observed the others to be too small you’d wonder if it is sturdy enough to protect you and the people who use it.

 Handrails  are supposed to provide comfort and security to people with physical disabilities especially those who cannot walk normally and the elderly. However, not all builders are perfect the reason for these problems.

In order to serve people,  handrails  should be installed properly. In other words, the right measurements have to be followed by builders and homeowners to assist and protect people in areas which are safety hazards.

In the home,  handrails  are a must in staircases as well as in balconies whether situated on the ground level or on an upper level. They can be installed together with railings or they can put up as it is on the wall, in the bathroom and toilet as well as on a bar counter.  Handrails  mounted in the toilet and bathroom are meant to help people keep their balance in case of slips and to prevent falls.

Depending on the type of people you’re targeting to use it for,  handrails  can be installed in different ways and with varying measurements. For the elderly and disabled people,  handrails  should ideally be installed at a height of 0.85 meters and 0.95 meters from the floor level.

A second  handrail  can be added measuring 0.70 and 0.75 meters in height for people on wheelchairs. Additionally, a third  handrail  can be installed to benefit short people including children at a height of 0.60 meters.

 Handrails  can be made from various types of materials such as wood and metal. They can also be of different shapes such as circular and square or with several sides. If possible, these should allow people to grip it firmly and easily.  Handrails  with sharp edges should always be avoided.

For those that are mounted on the wall, there is a required distance. For smooth walls, the  handrail  should be between 40 mm and 50 mm while for rough and textured walls, the ideal distance is 60 mm.

An important consideration when installing wall-mounted  handrails  is that they should be of a different color from that of the wall. Using a contrasting color will make it easy for people to see the fixture. This is also very beneficial to people with problems in their vision.

Whether in homes or buildings,  handrails  should always be continuous. There should not be gaps in between except only when it’s around the landing and when near the doorway. For stairs or ramps that measure more than three meters wide, it is vital to have a continuous  handrail .

Keep these things in mind in order to install the right  handrail  with the proper measurements. If you’re able to do this, you can rest assured that your loved ones will be safe in your home.

Learning About Deck Railing Styles

Installing Deck Railing Easily

Installing your deck may sound like a complicated affair, but it’s easier than you think with easy to follow directions. Sometimes, the most difficult parts of making a deck are choosing from the different deck railing styles available today. If you’re not the DIY type of person or don’t have the correct tools and equipment, you may want to hire a deck contractor or get help from a friend experienced in installing a deck. However, with good directions, installing a deck is not that complicated.

Installing Deck Railings

Deck railings serve two purposes: to provide safety for your family and friends and to bring beauty to your deck and home. They are the most visible part of your deck so you want them to be attractive. They also need to meet the requirements set by the law involving the distance (maximum 4 inches) as well as height requirements (between 36 and 42 inches). When installing your deck railings, you’ll find many different styles and designs available. If you have the correct tools and skills, you can have your deck railing installed in a couple of days.

  Baluster  Spacing and Installation

When installing your  balusters , it’s important that you space them evenly on your deck. Assuming the distance between two posts is 60 inches, your  baluster  width is 2″ and the required spacing between the two  balusters  is 4″, you add 4″ to the 2″ to get a total of 6″. Divide 60″ by 6″ and you get 10. This is the total number of  balusters  that you’ll need for your deck railing. To figure out the exact spacing, multiply 10 (number of  balusters  needed) by the width of each  baluster  (10X2=20). Subtract this figure from the distance between posts (60-20=40). Divide this number by the number of spacing plus one (10+1=11 then 40/11=3.64 inches). It’s actually easier than it seems, especially if you have basic math skills and a tape measure.

Working with Railing Posts

Installing the rail posts includes measuring the distance required for the posts and cutting them with a circular saw or table saw the required length, making sure to cut a 45-degree bevel on the outside bottom of the post. Be sure the post is flush against the joist and drill two holes through the post and the joist then secure them together with a 5-inch long carriage bolt. The  balusters  need to be cut from 2X2 stock. Clamp together 6 pieces and cut them all at the same time. Install the top and bottom rails 2″ thick and 4 inches wide spaced the correct distance apart. Measure both rails for fixing the  balusters . Nail them in place, making sure the nails are not too big so they don’t splinter the wood. Stand back and admire your work.

Add A Touch Of Elegance With Balustrades

Have you always wondered why certain houses look so good? You have exclusive and expensive furniture in your home, all the luxurious appliances, and many other things that is not only aesthetically pleasing but offer superior comfort as well. Still, there’s something missing, isn’t it? If you have always wanted to add a touch of elegance to the entry hall of your home or office, then installing staircase balustrades can do wonders for you. It will not just give the entire place a total face-lift but will ensure safety as well. Installing balustrades is more important in homes where there are little children. Kids have a natural tendency to run all over the house and climb the stairs quickly. If by any chance they slip, at least they will have something to grab or hold them from falling.

However, choosing the right staircase balustrade becomes a difficult task if you are doing it for the first time. This is why it is essential to find a reputed and reliable company providing balustrade. You can ask them to help you choose the right ones for your home, office, or plaza. There are many different types of balustrades available in the market, most of them are wooden, metal, and glass made.

The first thing you need to consider is the criteria of security. There are many exclusive designs in the market, but you also need to focus on the durability of the material you are about to purchase. So, it is essential to choose something that is exclusive and sturdy at the same time. People who have already installed balustrades in their houses will tell you that you need to consider the structure and style of your building before purchasing.

If you are not focusing on the durability of the material, then there are a lot of options available for you. Searching online will help you find a reliable company within very little time. It is one of the most convenient options to find balustrades. Cobham based manufacturers are in business for a long time with a great reputation in the market. Remember, you should not choose a company randomly. There are many other important tasks involved like proper installation, and so on. Remember, failing to choose the right ones can affect the look of your home and the total process may become a sheer wastage of money. So, to choose the right ones, it would be a wise decision to check out the reputation of the company before making any purchase.

Why Men Should Follow Fashion

The old cliche tells us that first impressions last a lifetime but are created in a second. And it’s true, possibly not the lifetime part but they certainly are created in a second; maybe even less. Long before you even utter your first words to someone they have summed you up. This person may not be able to write down this analysis or explain in great detail but that’s just because it happens without them knowing. Through changing the clothes you wear you change this image portrayed on to others. You will not also change yourself, you are still you but, a you that is instantly recognised positively by others.

Many believe that we originally adopted clothes because of sex. We used clothing to emphasise certain aspects of our bodies, which turned in to what we see today. This makes complete sense, with the same way women can give their look a huge boost just by showing cleavage men can do the same thing. No, not through revealing pants or by wearing anything transparent but by emphasising your best bits. Studies have shown women prefer men with broad shoulders, it shows they can defend their partners. If you are unfortunate enough not to have broad shoulders then you can do something about it by dressing for your body type.

We wear designer clothes for mainly the same reason we have trophy cabinets. Designer clothes for men usually show a brand of some sort, and that brand carries an image. The owners of the brand spend a lot of time, effort and money in order to develop a brand; this is why. You really are what you wear, if the brand is shown as quality and professional you will also be seen as quality and professional. It is worth a mention here that brands aren’t everything, fit and style are much more important.

In most armies of the world the rank of a soldier can be determined instantly through what they wear. It’s the same with every day life. The general principle here is this: the higher the ‘rank’ of a person the better they are at what they do. In a similar fashion, the higher rank you create through clothing the better you appear.

People love to appear in groups, studies have shown that just by putting people with in groups even if the group is insignificant (Group A and Group B for example) they will prefer people within the same group. Wearing a similar garment, or similar brand puts people in groups and helps them get along. If two men meet wearing a suit they are more likely to agree than if they were wearing different clothing.

Men should follow fashion because it’s their image, your image is what people perceive, what people perceive is more important than you know.