How To Approach Women – 3 Simple Things You Should Do

Most guys fail to pick up women because they approach them in the wrong way. The two most common ways that men hit on women are what I call the Frontal Assault and The Pitch 'n' Pray routines.

Frontal Assault is simply going up to a woman and sitting on her directly. While you get high marks for bravery, you have a high chance of failing with this routine because a woman's defenses immediately shoot up once she realizes she's being hit on. You see, women know what we really want from them. Being too direct makes them nervous so they just say no.

The Pitch 'n' Pray Routine is pretty pathetic (but even I used to do it before I became a master seducer). It involves going up to a woman and saying something lame like "hello", or asking her name. This not only bores her to death, but it makes you look like you have no self-confidence or imagination, and women are not attracted to men with no confidence.

If you want to have better luck in picking up and seducing women, you need to avoid the Frontal Assault and the Pitch 'n' Pray routines and do something else entirely.

Here are 3 things you need to do in order to seduce women:

1. Use humor – Women like a man with humor. Never be serious when approaching a woman. Go to her with an easy and cocky smile. Make your conversation easy and do not be afraid to make fun of yourself a little.

2. Ask for help – Women like to help. That's what nature intends for them: to be care givers. Asking a girl for her opinion on something which only she can help you with (like what to buy your small niece for her birthday) is an easy way to start a conversation.

3. Focus on her – Women like a man who listen to them because they think it means that that same man will also take care of them later on. When you talk to a woman you just met, let her do most of the talking. This will prevent you from saying something stupid and will make her feel important. Do not be totally speechless, just let her lead the way.

Do these 3 things when you approach a woman and you will have more results than you can imagine.

Insight to 2009-2010 Honda Odyssey

In Europe, the Honda Odyssey is identified as Honda Shuttle, minivan, or "Big MPV". It was manufactured by the Japanese auto makers in 1994 for the first time. In 1999, Odyssey was sold under different labels. It is currently sold as bigger Odyssey in North American marketplaces and smaller Odyssey in Japan and other markets around the globe. The non North American and 1st generation Odyssey models were mostly compact MPV size.

As a result of advancement in the new Odyssey vehicles, the 2009 Odyssey EX-L was rated as the most excellent value in this inspiring lineup. In EX-L, the letter "L" stands for standard leather upholstery. The EX-L trim comes with grubby shoes, fruit-drink packs, onion rings. For elders, it has power sunroof, heated frontage seats, high petroleum financial system version of Honda Odyssey's standard V-6 steam engine. Honda Odyssey basic price is 33,727 dollars. It fits smartly between 26,925 dollars with entry level car and $ 41,675 with high-line touring edition

Honda launched the ACE engineered body in 3rd generation Odyssey. Later it was also used in 8th generation Civic. Side-screen airbags and electronic constancy control are integrated in all current Honda models. These features were not available in earlier generation models.

Only the external color differentiates the 2009 Odyssey model from 2008 model. The 2009 Odyssey was designed based on 2005 model, but now it is now being fully redesigned for the year 2010. Redesign includes updated internal features, new external styling and most probable starting of soaring mileage V-6 diesel steam engine to move along with modified gasoline V-6.

Basics of Brick Fundraising

Brick fundraising is a great way to get decorative bricks to line a pathway or as a façade on a wall or entry way. Brick fundraising allows donors to pre-purchase bricks with names names that are later incorporated into the design of a new annex or building.

A brick fundraising campaign allows you to choose the size, shape and quality of bricks used. It also allows your donors to purchase a plain brick for a smaller donation or engraved bricks for larger treaties.

It is advisable to offer the engraved bricks as a part of your brick fundraising campaign. This allows the donors to see names names on the bricks and if it is a business or corporation that they get to advertise to the community.

With brick fundraising you are not only conducting a fundraiser but also building a legacy. Your bricks will be there for generations to come for all to see and appreciate.

Before you begin a brick fundraising campaign make sure you have a clear idea of ​​why you are building a new building or adding on. Also make sure your givers know up front why you are fundraising and how there bricks will be used. You should consider keeping a fundraising goal board available readily available so that your donors can see the progress being made.

With a brick fundraising campaign you will need to have adequate administrative help. You will need to be very thorough with your bookkeeping and accounting. Your donors as well as accountant will need to be able to see how much money was bought in and where all the money went to. A loose campaign will only spell trouble down the road.

Best Ways to Treat Hemorrhoids Naturally

Hemorrhoid treatments and procedures are usually very expensive which tend to make a hole in your pockets. Have you taken medications or have undergone any type of surgery to cure this problem but didn’t get satisfactory results?

Don’t lose heart because there are other options as well which will save you from spending more money on expensive treatments. Follow these easy tips to treat hemorrhoids at home without even visiting any clinic or doctor.

1. To start with, you have to find out the reasons that cause hemorrhoids. Two most prominent causes are unhealthy diet and lack of physical activities. You have to take care of your daily routine and incorporate a regular exercise regime in it. You also have to incorporate nutritious food items in your diet and come out of a sedentary lifestyle.

2. Another thing that you have to remember is that you must not force yourself in the toilet. If you are suffering from constipation then you must cure it because if your system is not clear the problem may become worse. In this case, you must include fibers in your diet. Fibers are excellent colon cleansers. You will also require green leafy vegetables and fruits that are rich in fiber. Apart from this water also plays a crucial role in cleaning the system. It removes toxins from the body and also softens the excreta. Drinking 8 to 10 glasses of water every day is sufficient.

3. While cleaning your anus make sure not to be too harsh. Use baby wipes or wipes with moisturizers. Herbal wipes are best to heal rashes and scratches. If you live in tropical climate soapy water is the best solution to clean the anus.

4. Water is the best treatment for hemorrhoids. Fill a bath tub with lukewarm water and add a tablespoon of white salt or baking powder in it. Soak yourself in this water and relax your body and mind for 20 minutes. If possible do this every day to see better results. The best time for this water therapy is morning at the time of bath or night before retiring. You must use fresh water every time and never repeat the same solution.

5. It is very important to keep your body clean always. For this you have to take shower daily. If your body is not clean there are chances of bacteria and other micro- organisms to survive on your body. To treat any disease this is the best thing that you can do. So, keep yourself neat and clean and feel relaxed.

If a hemorrhoid patient does not get proper treatment his condition and health deteriorates day by day. If you lose heart and surrender yourself to the disease you will gain nothing. Instead, gather courage and fight back because it is possible to cure hemorrhoid. Follow the aforementioned tips to live a healthy life and see yourself recover day by day. These tips are sure to be beneficial that will help you in the long run.

The Fundamentals Of Bathroom Ceiling Lighting

Every day, before we head off to the outside world, we spend some time in the bathroom first, taking care of ourselves. The bathroom is also a place where most of us spend time relaxing after a long day at work, possibly by soaking in the bath tub. Homeowners may not put too much attention to it but one of the most important amenities in a bathroom is the lights, especially bathroom ceiling lighting.

Yes, lighting plays a significant role in both the functionality and aesthetics of a bathroom. With the proper lighting, your bathroom can crossover from simply adequate to truly sophisticated. Proper lighting is necessary in every bathroom especially if it is used mainly for grooming and hygiene. Of course, activities such as shaving or putting on make up needs sufficient lighting in order to be done properly. To achieve this, you can install bathroom ceiling lighting fixtures that will provide the needed lighting. You can install a decorative lighting fixture and suspend it from the ceiling. This will not only provide enough light through the entire room but will also introduce an elegant style in your bathroom. In the shower, you can also install overhead lighting that will cast enough light into the area without producing too much glare. Ceiling lights will also brighten enclosed corners in your bathroom.

Bath tub areas need a more shade lighting to create a more relaxed atmosphere and subdued ambiance. This can be achieved by using recessed lighting fixtures that gently diffuse the light but still provide sufficient lighting. A good technique is to focus the light towards the edge of the tub. This will help avoid dull lights in your bath area. Meanwhile, if you are fond of reading while on the toilet, you can install reading lamps either on the ceiling or the wall.

The most important area of ​​the bathroom that should be given proper lighting is the vanity area or the mirror. You can install bathroom ceiling lighting that is positioned in a way that will eliminate shadows and dark circles on your face. This way, the clear and sufficient illumination will aid your grooming and help you look your best. Aside from overhead lighting, you can also use sconces that will provide just enough light without casting hard shadows on your face. If you want to feel like a movie star, you can also install fluorescent light bulbs, either bare or ensconced, along the sides of your vanity mirror.

To create a relaxing atmosphere throughout your bathroom and still provide the enough lighting, you can opt for rope lights embedded in recessed moldings along the outer edges of your ceiling. This will create a cozy and comfortable ambiance in your bathroom. To save up on electricity, you can use LED (light-emitting diodes). Other bathroom ceiling lighting is also available to suit you individual taste.

10 Mind-Blowing Photography Tips For Beginners

1) Pick a subject matter that speaks to you!

Pay attention to the reoccurring themes in your work. Think of what draws you to these things so you can find new ways to capture and express what you like!

2) Practice!

Do not be afraid to make mistakes! Sometimes those mistakes turn out to be something unique and innovative that you can build on.

3) Work the subject!

Try shooting the same thing in as many ways you can capture that different aspects about it. After you shoot look through your shoot and critique your work. Be mindful of what worked and what did not and why. Editing your shoot is an important part of the learning process.

4) Study the work of other photographers.

Find something that inspires you and pay attention to what you like and try to mimic it. Then try to make it your own by bringing in something new and different.

5) Composition.

If you pay attention, most great photographs will contain at least one of these guidelines:

  • Rule of Thirds: Imagine the image is divided into threes both horizontally and vertically. The interesting aspects of the image are placed on those lines. This rule is often used in landscapes, with the horizon being placed in the top, or bottom third of the composition. Some cameras even have a grid option that will display through your viewfinder, to help you make your composition precise.
  • Balancing Elements: If you are framing your main subject off center, try having a less important object in the background of the image to balance the weight of the dominant object. The secondary object will add depth to the subject and make it more interesting by filling the void of space in the image.
  • Leading Lines: Use the subject's lines or contours to your advantage! These lines lead the viewer's eyes across the image, so become aware of them and how to use them to your advantage. The more they lead the eye around, the longer the viewer looks at your image. Examples of the leading lines could be a winding road on a hilly landscape, or the contours of your model's body. Notice how models pose is ways that create leading lines by using their limbs in interesting ways.
  • Symmetry and Patterns: Often used in architecture and nature, even in artistic portraits. The subject is center balanced, unlike in the rule of thirds.
  • Viewpoint: The angle of which the photographer shoots in relation to the subject. Showing us a subject from an angle that we do not usually see it is a great way to make it more interesting. In working the subject, pay attention to the message the shot conveys. Try eye-level, from above, below, side behind from a distance, in close, etc …
  • Background: Pay attention to your background! If your background does not add to the subject, use a plain back or use a shallow depth of field to blur the background out. Think about how it affects the tone of the subject.
  • Depth: Mostly in landscapes, depth helps convey a 3-dimensional subject in a photograph, which is 2-dimensional.
  • Framing: Objects in your environment can be used to add to your shot! Some useful examples are: archways from a building, branches from a tree, holes in some cliffs. These frames can help show off the setting.
  • Cropping: Cropping in tight on a subject is a great way to remove distracting elements around it. Everything in the photograph should hold value to your image. If it does not, try cropping it out.

The more you practice these composition guides, the more they will become instinctual. Even in your editing & selection process, pay attention to which images pop out at you, and see if they hold one of these elements.

6) Familiarize yourself with your tools.

Photography is so versatile! You can even take amazing photos with a coffee can, but you must understand the limitations of your gear.

7) Familiarize yourself with photography software!

Digital software is today's darkroom & developing an image is just as important as how you shoot it. My favorite way to digitally polish my images is through Lightroom. It's amazing what it allows you to do to an image without exposing yourself to chemicals or wasting photo paper and developer. The preset filters are a great way to intensify the tone of the image, but you must know how to fine-tune them to make the image just so. Photoshop is also an important tool.

8) Learn Lighting!

I suggest photographing a subject at different times of day and compare them. If you have access to professional lighting equipment try shooting your subject lit from different angles, diffusion vs. Hard lighting, etc … There are jobs just dedicated to lighting on high-end shoots, so there are no limits there if you have the budget. Really think about how the light conveys your message to the viewer.

9) Go with your instincts!

Make sure what you are shooting is fulfilling something for you. There is no point in shooting something you are not enjoying. It will show in your work! The more you are passionate about it, the more creatively you can capture it! I've worked with so many photographers that have talent, but take on shoots that they do not enjoy and it showed in the quality of the images. For example, I could never understand why someone would hire a nature photographer to shoot their portraits. Somebody that is not a person person does not take flattering photos of people no matter how much technical knowledge they have. On the other hand, if you see all people as beautiful and you have a natural talent for making a person feel good about him / herself, then portrait photography is a great niche!

10) Communicate with your subject!

If you are shooting any time of portrait, make sure it is prepared beforehand. Nothing worse than having your model show up with chipped blue nail polish! Learn to guide your subject with clear direction in a way that makes them feel comfortable! Even models feel vulnerable with a lens in their face, so learn to give suggestions in a flattering way. Nobody feels confident after hearing "sucks in your gut," but if that's what you want try something like "intensify your ribcage". Compliments go a long way! When you ask for a smile, it will look forced. If you compliment the person they will naturally smile.

Decorating Ideas for Children’s Duvets

Whether you are decorating your first child’s nursery, or are thinking about redecorating your child’s existing bedroom, you have numerous options when it comes to bedding. This includes the type of bed covering to choose as well as the theme or style that will best suit your child’s personality. Duvets are an option that has been growing in popularity in recent years. A child’s duvet is stuffed with feathers, providing incomparable warmth and a soft feeling that children touch. You can also choose from a wide range of duvet covers, which are easy to take off and machine wash when your child spill on them. To get started with choosing the right decorations for your child’s bed, it’s helpful to examine all of these options.

A child’s duvet covers are an important part of decorating a child’s room because they are often the first part of the room that the eye is drawn to. They are practical, in that they provide warmth and a covering for the bed, but they also can be the center of attention in a nursery or child’s bedroom. To help make the most of these, it’s best to choose themes and different tones or colors that can be changed when your child is ready for something new. It’s usually a good idea to purchase two or three duvet covers to change the theme when needed.

Some examples of the types of themes that can dress up a child’s duvet include superheroes, dinosaurs, teddy bears, and floral patterns. No matter what your child’s current interests are, there is bound to be a duvet cover that matches their interests in the best way. This is a good way to spark interest in bedtime, because you can make the duvet something that fits in with playtime activities but draws the child into bed. You can also choose from a wide selection of different color palettes, including neon, pastels, primary colors, or neutral tones for a more subdued and sophisticated look. Think about what your child enjoys, and then play off of the other decorations in the room, such as rugs or wallpaper.

It’s also important to remember that children’s taste can change quite rapidly, so if you choose one theme prepare for it to fall out of favor after a couple of months. This is why it’s best to purchase more than one child duvet, so that you can have a few in rotation and recapture your child’s interest in bedtime.

Low Flow Toilets and Drain Piping

Today across North America, there is a popular trend towards the use of 'low flow' (also known as 'high efficiency') toilets. With the obvious benefit of using less water for operation, the low flow models are preferred by many environmentally conscious consumers and often mandated by many state, provincial and national plumbing codes.

Throughout the early 1990's until today, the volume of water used per flush in toilets has evolved from 3.4 US gal. (13 L) to 1.6 US gal. (6.1 L) to today's increasingly common new standard of 1.3 US gal. (4.9 L). Toilet manufacturers have met the challenge of improved designs to get adequate flushing using less water and the resultant reductions in consumption of the precious resource of fresh water have been noticedable.

However, designers and contractors involved in commercial construction are now realizing that low flow toilets may have a negative downstream effect on the plumbing system, specifically on drain piping. Here's why.

There are essentially three commonly used piping materials for sanitary drains in commercial construction – cast iron, copper and PVC. The selection of piping is due to a myriad of factors but driven mostly by material and installed cost as well as Code acceptance. Regardless, these 3 piping materials have varying surface smoothness properties and varying internal dimensions and as a result, markedly different flow capacities. Although the flow capacity of all three piping materials has historically been shown to be adequate with 13Lilets, this may no longer be the case with the low flow models.

Piping materials for gravity flow as in a drain system are characterized by a surface roughness coefficient known as the Manning Flow Coefficient (N). The lower the N factor, the smoother will be the pipe surface. The pipe size 3 "is uniformly used across North America for drains fromilets. Critical data for each of the 3 piping materials are: cast iron (ID = 3.10", N = .013); copper dwv (ID = 3.03 ", N = .011) and PVC Sch. 40 (ID = 3.04", N = .009).

Using the Manning Formula for a commonly used slope for drainage piping (1/4 "per foot), the flow capacities for 3" pipe (flowing full) in each material are as follows: cast iron – 62 US gpm; copper – 69 US gpm; and PVC – 86 US gpm (metric equivalents are 3.93 L / s; 4.38 L / s and 5.41 L / s, respectively). Thus, regardless of flow source, it is a fact that 3 "diameter copper and PVC will have significantly more flow capacity (25% for copper, and 38% for PVC) than the same nominal size of cast iron pipe. being acceptable to internal corrosion from the acids commonly found in sanitary sewage, its flow capacity will actually worsen over time where both copper and PVC will maintain flow capacity due to high levels of resistance to internal corrosion.

With respect to toilets, it stands to reason that less flow through the drain lines will greatly increase the chance of accumulation of solids in the sanitary flow or worse still, blockage. Contractors today have many times resolved to correct this operational problem by lessening the slope of the drain pipe to be near flat in order to keep solids suspended longer and increase the chances of proper drain flow occurring. This should be of concern to building owners as it not only would be a Code violation in most areas, it may introduce other odor or sanitary issues by sewer remaining for prolonged periods of time in drain lines. Only multiple future flushes of the low flow toilet may contribute to the ultimate transport of the sewage into a vertical stack and subsequent delivery into the underground sewer.

So, what can be done today to avoid flow problems or blockage? For existing buildings with cast iron laterals where upgrading may be done to low flow toilets, consideration should be given to replacing the cast iron with either copper or PVC for much improved flow capacity. For the same reasons, on new buildings, designers should be aware of this issue when specifying the new high efficiencyilets and give increased attention to the flow capacity of drain piping as a major factor in the selection of piping materials.

Linoleum Flooring Is the Best Choice

Linoleum flooring has been around for well over one hundred years. Linoleum flooring has been the choice for many schools, churches and other business for its durability, ease to maintain, and cost effectiveness. If you're considering installing some linoleum flooring in your home or business this article will guide you on many of the good and bad points to this type of flooring.

Available In a Large Range of Colors

The most recognizable advantage to installing linoleum flooring in your home is the ability to choose from so many different styles and colors to fit most home decorating ideas. You can find linoleum flooring with very unique designs that might nicely with several types of themes that you may chosen for a certain recreation room or bathroom.

Linoleum is Very Durable

There really is no such thing as a bad place to install linoleum flooring around your home. This type of flooring is very durable and works well in low traffic or high traffic rooms such as the bathroom or kitchen.

Linoleum Flooring is Water Resistant

If you are considering a flooring surface for the bathroom then linoleum flooring will be a great choice since it can end water and not harm it. You will want to make sure that the edges around your bathroom flooring is well sealed, but once you have taken that precaution you are good to go.

Linoleum Flooring is Easy to Repair

If you should decide to install linoleum flooring in your kitchen you will be pleased to know that it is very easy to repair. If you should make the mistake of dropping a sharp knife and it happens to stick into the floor or if you drop a heavy glass bowl that leaves a gouge in the floor surface you can repair it easily.

Linoleum Flooring is Easy to Clean

Everyone enjoys something that is easy to clean and linoleum flooring is just that. You can often get by with just some water to wipe up most spills. This one feature is a major seller for many linoleum flooring dealers.

Find the Perfect Concrete Pump

If you're in the market for a concrete pump to manage a construction project, or simply looking to expand your knowledge before embarking on a project, it's important to know the differences in designs, how they perform, and find which is perfect for your needs. When looking at concrete pumps it's important to investigate three areas; the manufacturer, purpose / design and of course price. All these attributes make concrete pumps completely different and applicable in a number of difference situations.


Like most construction equipment there are drastic differences in manufacturing quality for concrete pumps. Some of the most trusted manufacturers include Putzmeister and Schwing. It's important to find products from a reliable manufacturer such as these. Considering most pumping is done under pressure, low quality designs could break, under perform or even fail with cost and sometimes dangerous results. Trusted names are worth pursuing because of reliability and performance.


It's not surprising that concrete pumps are designed with very specific purposes and uses in mind. What is often surprising is exactly how complicated these purposes actually are, and how different it makes them. Every design specific purpose and should be used appropriately.

It's likely you'll see three primary pump types; booms, trailers and truck mounted. Although there are other types of pumps, these are the primary applications you'll most often see. These are also the ones with the most drastic differences in design.

Booms are versatile pumps that tend to be mounted on trucks or simply installed as separate placing booms. Truck mounted booms allow for fast set up and tear down, accuracy accuracy and high performance or multi-level pumping. Trailer pumps tend to offer more power and are ideal for tough to reach jobs, high pressure applications or just all around ease of use. Lastly, truck mounted designs carry the performance and ease of use trailer pumps have with the versatility and quick set up of a boom without the complication or training required in running a boom. As you can see, every pump has a different purpose and can be used in drastically different situations.


Often the largest consideration when choosing a pump is price. Often companies settle for under-performing pumps that are not suited for the demands of a given project. While prices for pumps are high, many pump sellers have reduced pricing on used pumps. While these pumps have been used, they still perform impeccably without costing as much as a new pump. If you have a specific pump need it is possible to find the correct pump for the application, or a pump that is qualified for a variety of demands. Buying used pumps can be a great way of ensuring the right equipment is on hand when the job calls.

How to Get Ripped, Slim and Lean

The matter of how to get ripped, slim and lean usually crops up once one has successfully gone through a diet and exercise program that has resolved in the person losing a bit of weight, though there are plenty of people out there who can benefit from knowing how to do such a thing even if they are still suffering from the conditions related to being overweight.

The first thing to do when it comes to trying to get down to a lean condition, is to understand that the weight that was accumulated did not magically appear overnight. Rather, it was gained over time, so understand that getting really ripped, slim and lean will take some time, though it will take you near the time that was needed to become overweight.

In the first place, all of those lean muscles are still underneath the adipose tissue (fat) that exist on a person's body who has become overweight. It is therefore incumbent on a person to first concentrate on doing the things that will cause fat loss, and then concentrate on the matter of body building or getting ripped.

There are a number of quality natural supplements that have been discovered over the last decade that can aid in this process (fat loss), and going on the Internet to find out just which ones that are can take a person a long way down the road to being able to get ripped slim and lean. Additionally, reconfiguring dietary habits will also help.

This means, of course, reducing the amount of fatty foods that are being along with the total amount of calories being taken in a day. For the most part, people need no more than 2000 calories per day to subsist. Unfortunately, people are taking in three or 4000 calories per day pretty consistently. This needs to change if one is to hope to get ripped and lean.

Also, a person who wishes become sleek looking will need to not only take in at least 64 ounces of water per day (spread out over the waking day, stopping about 1 to 2 hours before bedtime) but also will need to make the commitment to getting a quality eight hours of sleep each night. This is because the body does a lot of work at burning away fat when sleeping in a solid, quality way.

How to get ripped, slim and lean is more a matter of how to be committed and disciplined when it comes to first decreasing the weight and then doing the slightly small amount of exercise it will take to improve the muscles which already exist underneath all that fat . Be willing to use certain natural supplements and combine that with good diet, and watch the results roll in.

LCD Articulating Mount Or TV Wall Mount Swivel – To Tilt Or Not to Tilt

Using an LCD articulating mount or TV wall mount swivel might be one of the largest choices you are going to make in your install. Why? Because, like tattooing "Margret" on your forearm, you will be stuck with it for a long, long time. Unlike tattooing Margret's name on yourself, you have a chance to impress your wife by making the right choice.

First let's define them both and then we might get a better idea of ​​what their purpose and niche is. The LCD articulating mount has almost a full range of motion. You can pull your TV out from the wall and swivel left and right as well as tilt up and down. With the TV wall mount swivel you only have right to left movement. Sounds like in every case you're going to use the LCD articulating mount, right? Hold your horses, there are times when both have distinct advantages.

The wall mount swivel option is generally more secure, but limited by the fact you will only be able to adjust your TV from side to side. That's not to say that the LCD articulating mount is unsecure, but the added dimension of up and down tilt and extending arm is not always an advantage in an area where people will be passing close to your TV over and over again.

The location of your TV is often the deciding factor. Where are you putting your TV? Mounted under the kitchen cabinet? In the bedroom corner? In the can? These are your variables. The best rule of thumb on this is to look at wherever you are going to need tilt. Let's look at the two extremes on this … Mounting a TV under a kitchen cabinet: when would you ever need tilt? You could really use some tilt when you start that floor tiling project or something – but other than that? Um … never; so use the swivel. How about over your fireplace? That's the perfect spot for an LCD articulating mount. You will need to pull your TV out from the wall and tilt it down as you will most likely be higher than eye level.

Nine out of ten times you will be inclined to go with an articulating wall mount; it's nice to have that extra tilt function. Nine out of ten times, you will be correct, my young Padawan. The swivel wall mount is extremely handy in rooms that have quite a bit of traffic, or in areas that you expect to be watching at eye level most of the time. Locations like the aforementioned kitchen cabinet and workbenches (which are "busy" areas) are best served by a TV wall mount swivel. For just about everywhere else, the swivel mount looks to have the advantage, particularly in areas such as living rooms and bedrooms, where the traffic is considered lighter.

Remember to actually read the installation instructions. The last thing you want is to start showing off how clever you are to the wife only to have your TV plummet to the ground. If that happens-well maybe Margaret is still single …

Homemade Projector Screen – The Principle & How to DIY

Projector screens are generally divided into two types base on their functionalities: reflection projector screen and transmission projector screen. It can be also divided into soft and hard screen base on the materials they are made from.

Home theater generally uses soft reflection screen. My brother-in-law originally wanted to buy a ¥1000 (~$150) so-called “import screen”, but a friend of his who sells projector screens told him that it is hard nowadays (in China) to distinguish the genuineness of an import screen, it is hard even for himself. Some of them that are labeled with ‘import’ or ‘joint capital’ were actually manufactured somewhere in the south of China. He felt that he’d rather to buy a ¥300 domestically manufactured screen with good feelings than buy this kind of “import screen”. What this friend said makes perfect sense. But after doing some research, my brother-in-law found that all screens on the local market are made from high gain Bolivian bead that is used for projecting newspaper clips, they are simply not suitable for video frequency.

Theoretically speaking, a white wall with one smooth side actually is the best “screen”. Because its gain is 1, meaning that the light projected can be completely reflected out, which is an ideal state of being “no absorption, no gain”. Unfortunately, for the purpose of absorbing and proliferating the sound wave, he already made the wall a background wall with sound-absorbing material and plywood installed. making it impossible to serve as a “projector screen’, he had to find another solution.

You might be wondering at this point: why do people still bother purchasing expensive screens if we can all use white walls?

Well, there are always benefits and advantages of using a professional screen: convenient, artistically beautiful and dignified, good screen can also make up the insufficiency of a projector and improve visual effect. Among the expensive screens, one type is “gray screen” (cost about ¥15,000, roughly $2000). This kind of screen probably was originally designed for liquid crystal projectors. The biggest problem with liquid crystal projector is that the color appears dark and grey, insufficiently calm. This is its “congenital defect” that is caused by its liquid crystal board and path of rays.

Regarding gray screen, we all know that gray is merely a lighter black, and black absorbs all visible light. Gray can only partially absorb visible light, it is like brightness of the picture is reduced. If you have used any picture processing software’s “brightness / contrast gradient” option, you should certainly have noticed such phenomenon that reducing brightness is equivalent to increasing contrast gradient? Same concept, since the brightness has been reduced, it in turn increased its contrast gradient. The black effect gets improved due to the bigger contrast. We can also experience the same effect when we look out through the sunshade glass of our car. In fact, there are many ways to just reduce the brightness, you don’t have to use gray screen. There are magazines recommending putting the light gray filter of a photographic camera to the projection lens, the principle is the same. You can even use more simpler method, namely you need to adjust the projector’s output brightness or increase the contrast gradient. No need to spend a cent, you may achieve the similar effect, but the premise is that showroom must be dark enough.

Back to the bottom line, if a gray projector screen cost you $2000, definitely it is not just because the screen color is changed from white to gray. Speaking from the optical principle, I’m afraid there’s a lot more behind. I’m guessing probably certain chemical compositions have been added to the material of the screen that changed the reflection or absorption intensity of different wavelength of light, thus changed the luster and the contrast gradient of the entire image, that, makes up the inborn flaw of liquid crystal board after all. In addition to this, what other tricks do you think they can play? It doesn’t seem to be possible with the meager knowledge of physics that I have.

It sounds more like it to throw in a ¥150,000 screen if your projector cost you ¥15,000. But adding a ¥15,000 screen to a ¥15,000 projector doesn’t make much sense at all. If I have to buy a ¥15,000 screen, then it would simply work better if I put the money together and buy a ¥30,000 higher level projector to achieve better effect without any extra effort. A ¥15,000 screen is a crazy price to my brother-in-law (imagine his monthly income is merely ¥3000). Also if he buys a name brand Japanese gray screen, then he actually spend most of the money to pay for the labor which he personally doesn’t feel comfortable.

The ideal screen for the DLP projector that my brother-in-law purchased should be like a white wall, just let the project light reflected completely without any “reservation”. He figured that he really didn’t need such costly screen. So he finally decided to make one on his own.

Exactly how did he do it? You may not believe how simple and inexpensive it really was! He spent a bit over ¥10 (about $1.50) in a home decorating store on a self-adhesive pure white matted formica PVC panel with dim grains, cut the right size, pasted to his original background wall, that is it, flat and smooth! With such PVC screen, he doesn’t need to worry about the ‘curl-up’ phenomenon that may occur to a regular projector screen after around 12 years of use, he also doesn’t need to worry that it would turn yellow one day due to natural oxidation. But remember it requires some pasting techniques to make it work perfectly for you. The result? Great!

Here are couple of self-made projector screen photos from my brother-in-law as ‘evidence’:

Note: You may freely republish this recipe as long as author bio and active hyperlinks are kept intact. Thank you.

Aluminum Patio Awnings and Carports – Pros and Cons

Aluminum carports and patio covers have been popular and fashionable since always and in the recent several years these have become popular and attractive home improvements and improvements. Aluminum is a material that has been used since ages because it is light-weighted and at the same time, very strong and durable as well. Aluminum is supposedly to be a good alternative to stick built and steel structures. Although aluminum awnings have been used since years, but the colors, designs and styles have definitely evolved in the recent years. These diverse styles and design options give homeowners more choices to choose from. In this article, we will be primarily discussing aluminum patio awnings and carports.

The most important and noticeable advantage of aluminum is its great durability. You may personally know people who have been living in the same house since over 30 years and their patios are covered by aluminum awning since then till now. The best part is that even after so many years those patio covers would be standing and functional. Most of the aluminum patios covers available today are specially made to resist snow loads and winds and this is why those covers serve for decades. Aluminum patio cover or carport can give you years of use by resisting natural weather disasters. Besides being durable, aluminum pans are very attractive as well because these do not rust. Nowadays, a variety of different colors, designs and styles of framework is available and you can easily find an extremely eye-catching and attractive awning for your patios. Aluminum coverings and carports offer great structural simplicity. Aluminum is naturally very light in weight and this is the reason aluminum carport can be very conveniently attached to driveway and a patio cover can be very easily attached to the patio slab. These coverage require minimal anchoring.

The functionality and usefulness that aluminum patio cover or carport offer are matchless. There are not many home improvement projects that can be so practical. Patio covers save you from the sun and harsh weather. Spending time in the patio becomes very pleasant and positive when there is an awning over the patio. In the same way, aluminum carports can effectively protect and shelter vehicles in the absence of a garage. Carports can be standing or attached, both t types of carports offer great convenience and functionality.

There are some disadvantages of aluminum covers too. For instance, the birds are attracted by W-pan aluminum for making bird nests. Moreover, leaves and debris often accumulate on aluminum patio covers and carports because aluminum structures do not require much slope on the roof.

Interior Design Tips and Tricks to Decorate the House

Interior design is the most interesting and enjoyable concept for most homeowners and home builders. It is a good foundation that provides a huge effect on the look and space of the house. Whether you are planning to build a new house or renovating your existing house for happy living, it doesn’t matter because in interior design there is something that can be added or something that can be modified to make things beautiful and better.

Today, the idea of interior design has significantly revolutionised, and the designers and homeowners are decorating and designing creative and innovative interiors through wooden furniture, marbles, sofa cum bed, lounge chairs, granites and much more. Thus the concept of best interior design has become a never ending process, and there is always something new you can learn or apply in your interior to improve it in a better way.

Interior design companies provide numerous interior design ideas online with the photos on the websites to have a better understanding of the style and design.Thus one can conclude that interior design gives a genuinely modern and aesthetic appeal in the house. It adds more value to the home along with the exceptional beauty. So have a look at some smart tips and tricks to have a more significant and impressive look in the interiors of the house.

  1. Paint the walls in lighter and softer colours: There are thousands of paint colours available with different shades, tones and tints and each one gives a different look. So stick to the colours like beige or cream or grey for the living room where the flow is necessary. And if you have small rooms, then painting them with neutral and light colours helps them look larger. Conversely, rooms with darker shades seem more smaller than it is.
  2. Give your furniture some breathing room: Gracious and luxurious interior means space to move quickly so resist overcrowding a room. You don’t need to fill up space with lots of furniture. Spend more of your budget on fewer but quality and attractive furniture pieces to give a better and impressive look to your house.You can go for a fabric sofa along with wingback chairs to have a sense of balanced and designer look in the home.
  3. Use decorative items to add a beauty in the house: Home needs some accessories to provide an enchanting look. Decorative mirrors, antique artwork pieces, wooden items, metal or acrylic, etc. can be placed on the coffee table tops, bedside tables, tea carts and much more for extra dimension and texture. Pictures from magazines and children book’s can be framed and hung in children rooms. Arrange candles, books and family photo frames on the nest of tables, bookshelves to add a charming look in the room.
  4. Layer your lighting: Every room should have three types of lighting: ambient light from ceiling fixtures to provide overall illumination, task which should be fixed over a reading nook or a kitchen island, and accent light, which provides more decorative and highlighting feature to the house. Thus proper lighting in the room creates a brighter and pure ambience in the home.
  5. Create a focal point: As there are leading roles and supporting members in any production, the same holds for interior design. Choose furniture in every room that can make a focal point to anchor the room and rest can be treated as secondary pieces. Focal points in the house create a dramatic look. In the bedroom, a poster bed with curtains or an upholstered headboard can draw attention, in the living room a mantel and art piece can provide impressive look. In the kitchen, a wooden display cabinet with designer patterns on it gives a stylish look to the house. Thus whatever it is, central points will always create a visual appeal in the home.
  6. Be Bold: Personality is what makes a space great. Create your own designs and have fun. Incorporate ottomans seat, library style bookshelves, chandelier if you want your living space that really wow. Add plants to every room space to add colours and textures and to provide a balanced humidity in the house.