Ceramic Hair Iron Vs Tourmaline Flat Iron

There are not many differences between the ceramic hair iron and the tourmaline flat iron, as they almost do the same job. But some of the noticeable ones are:

Negative ions

Tourmaline flat irons produce great number of negative ions, which strengthens the hair for long, and also gives a silkier and shinier look. Whereas, the ceramic hair iron does not give as many negative ions as tourmaline flat irons, this is necessary to keep your hair healthy and silky.

Variety

Though top brands which manufacture hair straighteners have both ceramic hair iron and the tourmaline flat irons, the variety is very limited. The choices are more when it comes to ceramic hair iron when compared to tourmaline flat irons.

Availability

As everybody recommends hair straighteners which have ceramic plates, they are always available. This is not the case with tourmaline flat irons.

Prevents heat damage

The hair straighteners which have ceramic plates, prevents your hair from the damage which is caused due to heat. Tourmaline flat irons does this job well, as it produces more negative ions, to give you to smooth, shiny and silky hair, that you always wanted to have.

Combination

The tourmaline flat irons are infused with ceramic heater and plates, to give you better results. But ceramic hair irons, are not infused with tourmaline plates or the heater.

Price

Tourmaline flat irons are relatively cheaper to the ceramic hair irons.

Time

Tourmaline flat irons are said to take just 25 seconds to straighten your hair, whereas the ceramic hair irons takes slightly longer time.

Though tourmaline flat irons gives you better results than the ceramic hair irons, people prefer the ceramic hair irons the most. The cheapest at the same time top rated tourmaline flat iron is the Solia Tourmaline Ceramic Ion Flat Iron. All top brands like Sedu, Chi, T3, GHD all manufacture both tourmaline and ceramic flat irons, where ceramic flat irons occupies the major portion.

How to Choose a Bike Helmet

The bike helmet is designed to protect the head of a shock and attenuated impacts to the skull of a cyclist in falls. Even if the helmet is apparently not damaged, it can be fragile and cracked in places that are not visible. Ride with a helmet that has already received a shock can be very dangerous because no longer play a protective role.

– Visible deterioration

If you see with the naked eye deterioration of the helmet (small cracks, which straps snapped, things that come off ) it is very important to change the helmet. Only a good helmet can protect you effectively.

– After a few years

Depending on your practice and the number of outings, it is recommended to change the helmet if it gets too old (from 5 years if the state looks correct). A helmet may be too old elements and materials that age less well than others, especially if your headphones are stored in a cold or wet.

– Change in subject

If you want to address a cycling discipline different from what you are doing now, you will need a different helmet that will fit best in your new practice. (Example: transition from BMX biking, passage of the road bike to mountain biking).

– Other possible reasons

Many other reasons exist: simply the desire to change, the desire to have a helmet lighter, more design, more airy and so on.

Selection of helmets (Size of bicycle helmets and bike):

The helmet sizes are listed as “53-56cm” which is the minimum and maximum circumference of the head. To find your size, simply measure the head circumference, outline his head at the front, where it is wide, with a flexible meter.

– Choose a helmet for child

Choosing a helmet for child comes first by proper sizing. Indeed children grow up fast and many sizes available. Also make sure they have air holes and that they meet the standard which validates the quality of the bike helmet.

– Choose a helmet for city bike

The helmets for city bikes are usually relatively round and include many vents. Check that you can wash the helmet completely, or at least the inner parts detachable foam. Check the standards that validate the quality of the product.

– Select a road bike helmet

Once the size of your head circumference well defined, it remains only to be careful about certain things: the presence of vents, the method of washing the helmet standards and possibly the weight of the helmet if you are looking for a lightweight. Helmets road bikes are usually lighter all the possible, the greatest difference being in design (aerodynamic shape and color) helmets.

– Choose a bike helmet

In the case of a conventional use of an hiking and cross-country helmets are very similar to those of city or highway. They must have many vents, must be certified and relatively light. Bike helmets may have small shields that prevent rain or the projection of mud.

– Choose a Freeride bike helmet

If you make the bike very involved, with jumps, downhill mountain… etc. It is very important for a beginner as well as for an expert to have a helmet. The helmet is very interesting because truly protects the entire head in a fall, jaw included. The falls in these disciplines can be very serious and very violent, hence the importance of such a helmet.

– Choose a BMX bike helmet

There are two types of helmets available: the full-face helmet and the helmet “bowl” which as its name suggests looks like a bowl. The helmet protects more but may also be more annoying. It is generally used by practitioners of “BMX race”. The helmet “bowl” is used by other sports of BMX bike.

The helmet must wrap his head well and it should not be open space and play between the two. It should be straight and cover both the top of the forehead and the back of the head. Crash helmet back one must touch the ground.

The strap must not be too tight or too loose. To make sure the helmet is properly set, turn your head from left to right and from top to bottom: Neither the helmet and the strap should not move or affect you.

A bicycle helmet is designed exclusively for cycling. You may not use these headphones for sports. Similarly, the full-face helmet for BMX or Freeride bike is absolutely not intended and approved for the bike, or anything other than cycling.

Eaves and a Comfortable Life

When designing a new home, you want to take advantage of the chance to make it as energy efficient as possible, thereby saving money as well as creating a healthier and more comfortable living space. For new home builders it’s an important factor to think about environmentally sustainable homes. All homes need to be correctly shaded so as to take advantage of the winter sun, and block it out in the summer, and this also includes the shading of glass.

Unprotected glass is the major reason for unwanted heat in a home in the summer months, where radiant heat becomes trapped within the confines of your living space. One of the most effective ways to provide shading is through the use of eaves which are designed to protect your home, including the windows, from the rays of the sun in the hot months, and to let in helpful sun during the cool months.

This can be achieved in many climates by angling the eaves to allow some low angle winter sun to reach walls, floors and specially house windows. The way that you correctly align your eaves would depend mostly on the weather – in colder altitudes the width of the eaves must be reduced to 42 or 43 per cent and also increasing the distance between the window head and the eave. It might not be beneficial to alter the width of the eaves in the lower latitudes, as hot summers and long days would make the lack of eaves unbearable.

There are very specific formulas that should be used based on latitude and climate to determine an optimum eaves width for energy efficiency. One way of calculating the needed width of the eaves on a ground level home is to multiply the distance from the eaves-line down to the bottom of the window by 0.7; this will give you an eave width that will protect the window during summer. Doing so should keep the glass adequately shaded in the hotter latitudes during the summer months.

Considering all the possibility for shading is an important consideration for new home builders. Not all home builders use external sources and plants, blinds or even louvers, operable clerestory windows, glaze and tinted glass so as to adjust the way sun enters the home. You want your home to work for you, instead of against the climate. If it runs too cold or too hot, it could become expensive to keep your home tolerable.

If your home is well designed and sustainable, it would both run better as well as save you money. Fixed shading devices such as eaves, if properly installed, not only save money, but save lots of time, energy, care and hassle, making your home a more comfortable, healthy and homely place to live.

Smartphone EMF Protection Through Detachment

Smartphones, cellphones, Tablets and all personal handheld communication devices are creating an extremely powerful attachment to your brain. Many people are living in a world which does not exist without the instant ability to connect, react and respond to information from these devices. This is an attachment. Attachment is a false sense of reality. A mental stronghold that controls and limits peoples ability to reach higher levels of consciousness, awareness and mindfulness. Attachments are not serving they are taking. Attachments create disease in the mind and body. Attachments stunt and retard the growth of consciousness in humans creating a mental prison of thoughts, ideas and fears. Attachments are all internal and negative. They do not serve you, you serve them. Attachments create fear and limit action.

Attachment to your smart phone is like living in a prison cell inside the matrix of your mind. With the thought of it and what it could be doing keeps you in a paralyzed fake reality. Controlled by the negative fears and thoughts of what you might miss or what could happen to you without, “my precious” coveted smart phone. Learning how to detach yourself from your Smartphone can free you from this prison and help you learn one of the 7 spiritual laws of success, Detachment.

Detachment is one of the most important ways of viewing life known to humankind. Detachment is limitless and the highest level of consciousness. Detachment is pure love. It is reaching a higher level of vibration. Detachment is as close to god as you can get. Detachment is what every single Avatar, sage and God like human that has walked this Earth mastered. Detachment in its basic form, is what they have been teaching in written texts throughout history. Detachment is getting in touch with yourself. Tapping into the infinite power of love light and divinity that the universe holds. Detachment is pure unconditional Christ like love. Detachment frees your mind and heals your body. Detachment give you endless energy. It is pure Love and giving to all things.

When practice the art of detaching yourself from the stronghold that cellphones, Smartphones and Tablets hold over you. You will be free, to completely be present and to be allot happier. Every time you have a thought about what is this? What is that? Were is so and so? How can I do this? How much does that cost? Were is that? If you have a smart phone next to you there is a very strong chance you will look it up. This is a great tool, it has helped in many of situations. But it has in many more ways created an information overload. People cannot handle that much information at one time. It’s a shotgun bang to the cerebrum. Done, finished excessive amounts, short-circuit. Stepping back and learning the art of detachment, you will control the impulsive information cravings. You will control how to sort out the crap from the needed. Free your mind from the mental slavery of vast information paralysis.

How to practice detachment. First this will be hard. Turn off your cellphone! Some people will actually get withdrawals and go into panic and possibly shock or convulsions. Its OK just let it happen. Next sit or lay on the floor in a comfortable position. Pretend that the back of your forehead is a T.V screen, whenever a thought or impulse comes onto the screen get rid of it. You can play a game with this either shoot it with a laser beam, or pretend its a sticky note and that note suddenly bursts into flames. Then disappears as black smoke. As you practice this more and more, it will get easier. As this becomes easier it will be more fun. As you have more fun doing this exercise you will be happier. Once you are having fun living in ease and being happy doing this exercise, in a controlled relaxing environment. You then can bring this to all places you go, all day everyday. When you have mastered the art of detachment to your smartphone, you will no longer feel the constant need to have it with you next to your body 24/7. This is the most powerful form of EMF protection available, Smartphone Abstinence. Use it when needed for a purpose. Use it don’t let the Smart Phone use and control you.

If you do have a need for work or other reasons to have your phone next to you, then the next best form of EMF protection is having some physical products on or near the phone. Air-tube headsets, EMF protection holsters and carriers. Orgonite and EMF radiation cellphone chips. Pendants and bracelet EMF protection all are powerful and great ways to keep your Brain and Body safe from the toxic effects of Cellphone EMF radiation.

Insulation R Value Guide

Insulation R value guide ratings are used to measure the insulation’s ability to resist heat flow. The higher the R value, the better it is expected to perform. Home insulation should be purchased based on the insulation R value guide, and not thickness or weight.

One type of insulation maybe thicker or thinner, but if the R value is the same they should insulate the same. Insulation R value performance testing is done in a 70 degrees Fahrenheit environment with no air movement. However, when you need insulation the most you’re generally not in these ideal temperatures or conditions. This can result in the rated house insulation R value being greater than the actual R value. The average recommended R value of insulating material for basement insulation is R-12. The Insulation R value guide in house insulation is a lot lowered when there’s any air or water or moisture leakage. The standard R value for house hold insulation varies based on climate and temperature. There are different types of house insulation materials and each one has a different R value.

Protecting your house insulation and keeping your R value high is extremely important for lower utility bills. Water is one of the more important concerns in regards to R value and house insulation. If moisture of any type gets into your house insulation, it lowers the R value. The moisture weighs the insulation down, and as a result it leaves gaps or bare spots. Superseal Dimpled Membrane provides a permanent barrier against water/moisture from entering your home. It protects the home’s insulation and its R value by keeping your home dry. Superseal helps protect and increase the life expectancy of your house insulation and its R value.

Approximately 11% of your home is not insulated properly due to wood framing however, wall studs are a fact in home construction. Before you cover up the wall studs, making house insulation diagrams for any future reference is a good idea and saves a lot of headaches. The R values of wood studs act as a type of thermal bridge. The R values of wood can create a what amounts to a cold area in the insulation where the wood stud meets the sheetrock.

The cold spots can lower the effectiveness of the insulation and lower the effective average R values of the whole wall. In addition to the poor R values of wood lowering the R-values of the wall, a cold spot may lead to moisture and condensation problems. Moisture can and will condense through wall studs, which generally have the lowest insulation R values, and other framing materials of the home. If moisture does get into the wall cavity, condensation can occur where the cold R values of wood studs meet the sheetrock.

The R values of wood wall studs are measured in terms of linear inches. However, wooden wall studs generally lower the R values of your insulation. The R values of wood are specified as 1.25 per inch. To help protect against moisture entering your home and further lowering your homes r values, protect your home with Superseal Dimpled Membrane. Superseal provides a permanent barrier around your home and helps protect your homes R values. Just 4% moisture in your insulation could lower its thermal efficiency, in that area, by up to 70%.

It’s important to remember when buying home insulation, that the home insulation materials with the highest R value may not be the most cost-effective. When insulating your basement wall to an R value of R-12, it might not cost as much to use 2 layers of home insulation materials with an R-6 R value rating instead of 3 R-4 R value rated home insulation materials. Just because the home insulation is the most expensive, doesn’t mean it’s the best.

Another home insulation tip is to make sure to buy your home insulation based on its R value not its weight or thickness. Also, if you are installing fiberglass insulation yourself, remember that the fiberglass is made of glass strands. Touching fiberglass insulation material makes you very itchy. This is because the glass breaks into tiny pieces, and gets into your hands or skin. The last and most important tip for home insulation is to make sure to protect your insulation from water and moisture. Just 4% moisture in your insulation can reduce the thermal efficiency, by up to 70%.

Acne Natural Cure – Easy and Effective Ways to Stop Acne

Have you ever wondered what people used to treat acne before all cleansers and antibiotics appeared on the market? With so many acne medications available online and from a local supermarket, many people don’t even think of acne natural cure. However, most commercial cleansers are harsh on your face, not to mention that trying several of them to find the right one for you would cost a fortune. You would be surprised how many products from an average person kitchen can serve as effective natural acne cure.

There are many natural acne remedies; the only trick is to find one that would work for your skin type. Unfortunately, here you will have to experiment and see what works and what doesn’t. We offer you several recipes of acne home treatment. Try them and see which will help to clear your skin.

Natural acne remedies to clean your skin

A wash of milk with lime is a great treatment for blackheads. First bring a glass of milk to a gentle boil, and then add juice from half a lime. When the milk cools down it makes a great face wash. You can store it in the fridge for a couple days.

A raw potato is cheap and brilliant acne natural cure, especially for whiteheads. The vitamin C makes your skin glow, and alkaline in the potato kills the bacteria on your face. The potato also has an exfoliating effect helping you to get rid of dead skin cells. Papaya fruit produces similar effect; you should also use it raw.

Natural moisturizers for skin with acne problem

Remember, that even the most gentle and natural products to clean your face leave your skin a bit dry, so it needs a moisturizer. Almond oil is an excellent way to re-hydrate skin after using an acne natural cleanser. Grind 7-8 almond nuts (not fried of course) with a little bit of water. Spread the paste on your face and let it stay for a few minutes. Then gently wash it off with water. Another good natural moisturizer is buttermilk or low fat, non flavored yogurt.

One important thing to remember about all natural acne remedies as well as all natural skin care products, is that since you don’t use any preservatives, you will have to store them in a fridge. It is also best to use it within 2-3 days, otherwise the product starts spoiling and you can infect your skin and make acne problem even worth.

Some people think that acne is related to your diet. Pizza, chocolate and other foods with a lot of oil are blamed, but in fact there is no evidence that foods cause acne or make them worse. However, adding fresh fruit to your diet seems to help many people to clrear their faces. Possible reason is vatamins and minirals that fresh fruit contains. So keep that in mind, and next time you feel like a snask have an apple not a cooki.

Of course you can’t expect to get rid of your acne in a few days, natural cure always takes a little time to work. But if you are persistent, you will get blemish free skin and will not experience any dangerous side effects that commercial acne medicine has.

Dead Sea Salt Body Scrub

Dead sea salt has many benefits for the body, including exfoliating, moisturizing, revitalizing and cleansing. Salt gathered from the Dead Sea makes an excellent body scrub because of its high mineral content, which is much higher than normal sea salt. In fact, Dead Sea salt contains magnesium, potassium and calcium, all of which work to repair, heal and hydrate the skin. Using this salt in a body scrub will yield almost miraculous results on sufferers of dry skin, psoriasis, acne, wrinkles and aging skin.

Scientific research has proven that bathing in a mixture made from Dead Sea salts reduces dry skin, inflammation and redness, and in some cases, completely clears up psoriasis when used on a regular basis. Using a Dead Sea salt body scrub intensifies these benefits and may provide results even sooner. One study, published in the International Journal of Dermatology, found that individuals with dry skin experienced gradual improvement over six weeks of treatments. Another study, published later in the same journal, found that 70 percent of patients suffering from psoriasis experienced completely cleared skin after only three weeks of treatments, while the other 30 percent saw marked improvement as well.



Making Your Own Dead Sea Salt Body Scrub

The best way to experience the benefits of Dead Sea salt for yourself is to make a body scrub at home. Purchase high-quality salts from a reputable supplier for the best results. You can usually find the salts online at reasonable prices or if you live near the area, you may be able to source them locally. Once you have your salts in hand, its time to move on to the fun part – making your own body scrub. Follow the basic recipe below, which can be customized to suit your tastes and skin type.

Ingredients:

  • 1/2 cup Dead Sea salt
  • 1/2 cup olive oil or other high-quality vegetable oil
  • 10 to 15 drops essential oil of choice

Directions:

  1. Combine all ingredients in a small mixing bowl.
  2. To use, massage the mixture into the skin over the whole body, using your fingertips and moving in a circular motion.
  3. Wait about 5 minutes, and then rinse your body with cool water.
  4. Follow the treatment with a shower using a gentle body cleanser, and then apply a moisturizer.

Dead Sea Salt Body Scrub Tips

  • The essential oil can be omitted if desired, though the scrub will be more effective if you add a few drops of oil that compliments your skin type. Try lavender or rosemary for dry skin, neroli or rose for normal skin, and cypress or lemon for oily skin.
  • Never use a body scrub made with salt on broken skin or open wounds, or you’ll experience painful stinging sensations. Avoid using just after shaving.
  • Always follow the treatment by thoroughly cleansing and moisturizing the skin. For the best results, rinse the skin first with warm water.
  • Store any leftover body scrub in an airtight container and place in a cool, dry place when not in use.

What Are Hair Chemical Relaxers?

A chemical relaxer for hair is designed to eliminate curls, no matter what level of curl the hair has. This can be anything from heavily curled hair to something like tightly-coiled hair that simply creates the curls in the first place. This type of hair is natural, but a lot of people simply don’t like it or grow tired of it. They may also just decide that they want something different in which the curls are getting in the way of what the person desires. They may want a new hairstyle and curls may affect the overall results or make it difficult to obtain that particular style of hair. A chemical hair relaxer will straighten the hair so that curls will not get in the way and they can achieve the style they want with ease.

Types of Hair Relaxers

Chemical relaxers are available in various types. Hydroxide or metal relaxers include lithium, potassium, or sodium ionic metals that mix with hydrogen and oxygen to form relaxers for the hair.

This includes products like:

  • Lye hair relaxers: This type of relaxer includes sodium hydroxide that breaks down the bonds in the hair to straighten them.
  • Non-Lye hair relaxers: This type is composed of potassium hydroxide, guanidine hydroxide or calcium hydroxide depending on product. These compounds have lower alkalinity than lye relaxers. Non-lye compositions are safer to use, but take longer to straighten the hair.

Thio relaxers are another type of relaxer and are made of ammonium thioglycolate, which is where the name came from. This type has more thickness and more viscosity than other types, but does require a neutralizer after the application is rinsed away.

Comparing Lye and Non-Lye Hair Relaxers

The main difference between lye and non-lye hair relaxers is that the pH levels are higher for lye compounds. This makes the straightening process faster. Basically, the higher the pH, the faster the product works its magic. However, lower pH levels are safer to use and many consumers have switched to non-lye products. Aside from pH levels, non-lye products are more affordable and have less burning on the scalp. One advantage to lye hair relaxers is that they provide longer lasting results.

Thio relaxers are easier to work with, due to their thickness and viscosity. Upon completion, they return the hair back to its normal structure as a disulfide link, unlike lye and non-lye relaxers that change the hair to a lanthionine link.

Lime Survey – A Review on the Open Source Survey Software

Lime Survey (formerly known as PHP Surveyor) is an open source survey software that you can use for setting up online surveys. The software generates survey forms and collects data by using a set of PHP scripts with MySQL or MS SQL.

The main advantage of Lime Survey is that it comes with a good collection of ready made templates. The survey software has a dashboard that you can use for a variety of purposes like monitoring the surveys, setting quotas, and displaying the results into a range of formats as well as local Excel spreadsheets. Once you have completed the survey, you can save it and use it for future surveys. Thus after designing a particular survey, you save a lot of work that you may have to put in for a fresh survey. The software also allows users to save the survey and complete it in another sitting if they want. The collections of questions available with the software are fully customizable to the nature of your business. Apart from all that, you get PDF automatically and also printed versions of the survey.

Considering the disadvantages which are only a few, Lime Survey requires setup on a server, and the problem is that it takes a lot of time to install and configure the software. But although the initial setup is somewhat technical, once the setup process is over, anybody can start using the software for setting up the survey. However, it does take some time to learn and understand.

On the whole, Lime Survey is a rugged and priceless survey tool that comes free. Although it has a few issues, it all diminishes considering the many advantages and the fact that the software is open source.

Bar Music

A  bar  is a perfect destination to spend the evenings in the company of friends with cocktails. The music in  bars  gives a relaxed feel after the day?s long work. Each  bar  is differently designed and themed.  Bar  music reflects the theme and the mood in the  bar . Musical events are organized every day in the  bar , during the evening hours.  Bar  music is either played by the DJs or by live bands.

Generally, live musical shows are organized late in the evening, when the  bar  gets crowded. Some  bars  provide live musical shows throughout the week. But, most  bars  present live musical shows only during weekends; this is the time when most  bars  are thickly packed. To add charm to the treat,  bars  also present live musical shows by noteworthy singers. Live  bar  music covers a wide range of tastes including jazz, rock, Cajun, and folk. Most live musical shows in the  bars  are loud, and are overly focused on the entertainment of the crowd.

Nowadays, DJ music is considered a better option to entertain the crowds in  bars . DJs usually spin the latest hip hop music, which is popular among most age groups. Besides the popular music, DJs also play music on the request of the crowd. Some  bars  also provide facilities to rock the dancing floor along with the music.

In the case of theme  bars , the music mostly depends on the theme. Thus, themed  bars  are ideal for those who want to spend a soothing evening with friends and drinks. People also host parties, celebrations, and get-togethers in the  bars . For these types of special events,  bars  also arrange special musical shows.

With assorted menus, strong drinks, and hip hop music,  bars  are the best destinations to spend the evenings.

Sex Toys to Share

The majority of adult toy enthusiasts are familiar with having adult toys that are specifically targeted at the requirements of males such as enlargement pumps, or those for females that include butterfly stims, but there are also a large number of adult sex toys in the marketplace that are intended to be used by partners. Below are a number of the most popular adult toys for couples available.

Cock Rings with Vibration

Established for a long time as a sex aid for men, cock rings (also called penis rings) are not solely a benefit for males but can also aid with the titillation of the female. This is especially the case with vibrating cock rings that are worn round the base of the male genitalia and assist the man to keep a longer-lasting, thicker and firmer hard on. Nevertheless, unlike ordinary penis rings (which do benefit the female partner by helping to prolong sex), vibrating cock rings either have a built in motor or come with a bullet vibrator that is designed to fix to the penis ring. This excites the clitoris bringing a more enjoyable experience for the woman. A number of vibrating penis rings also have stimulating pleasure nubs on the outer surface for further stimulation.

Fingertip Massagers

Alongside small vibrators, fingertip massagers are the perfect items to use in foreplay. Finger massagers are available as supple sleeves that fit onto the finger and come with a raised textured surface, and ones that have a vibrating bullet included. Use fingertip massagers to gently touch the surface of your partner’s skin to get them prepared for lovemaking. Also available are finger stimulators with tapered ends for use in anal play.

Penis Sleeves

Penis sleeves can also benefit both the male and the female partner. They come as either single ended or open ended sleeves. The single ended versions usually have an extension at the tip of the sleeve which enables the man to add supplementary inches to the penis which permits the receiving partner to enjoy a deeper level of penetration if wished for. A number of examples also have pleasure nodules on the surface. The open-ended penis sleeves are available either as in a pack or as singles and have different stimulating surfaces on the outside which invigorate the female. Penis sleeves are stretchy so that they fit all penis sizes.

Remote Control Adult Toys

Remote control sex toys are one of the most popular types of adult toys lately. These sex toys are usually wireless with some of them having a range of up to 10 metres. Simply pass on the controller to your other half and let the fun commerce! Usually coming with multispeed functions available by touching a button, remote control sex toys can be used any place as long as they’re within the controller’s range. When the female is wearing a bullet vibrator or an egg and their partner has the controls, she can have any amount of sensations whilst not being in control.

Sex Toys for the Shower

To help you enjoy better shower sex there are a variety of items available in addition to vibrators such as an attachment that transforms your shower into a unit with 2 heads in order that both parts of the couple can remain warm and wet at the same time, suction handles that fix to the tiles which allows you to have fun with different shower sex positions without sliding and even shower suction cuffs so that you can enjoy soft bondage while you’re under the running water.

Adult toys that are traditionally associated with solo use can also be used as sex toys for couples. A rabbit sex toy, can for instance, be used by the man to satisfy the woman instead of the female using it on her own. Similarly, a woman can use a male masturbator on her fella instead of him using it as a solo toy. Use your imagination and enjoy adult toys together.

Foolproof Guide and Tips to Winterising a Static Caravan

Winterising a static caravan is often viewed as a trivial matter. But not winterising properly can result in cracked pipes, unnecessary water and repair bills and in the case of having to replace your boiler; tears!

So to avoid this heart ache here are our foolproof static caravan winterising tips:

1. Turn off your water by the stopcock under the caravan.

2. Open all taps. Flush toilet. Add anti freeze to the toilet. Disconnect shower from taps. Open all drain valves under caravan. If these are not available disconnect one or two joints at the lowest points. Most importantly drain off your water heater. Usually they have a drain plug fitted. If not disconnect a pipe.

3. It is important to remove all water from the system. If you can disconnect the stopcock as well no water can enter the system, as stopcocks can and do sometimes seep water through even though you might have thought you have turned them off.

4. One thing that you must never do is to close off the air vents in your caravan at any time. They are there for a purpose and it can be dangerous if closed off. It can also cause condensation.

5. Don’t forget your roof. It will take a lot of bad weather and they don’t last forever. If you think there may be a problem, flash your caravan or use Isoflex on the joints. It is a wise precaution.

6. Still worried? Then why not have a professional do it for you? Paying a gas fitter to drain off your caravan and set it up again for the new season not only takes away the anxiety of winterising your caravan properly (because if there are any problems it is the gas fitter’s obligation to put them right) but you also start the new season the right way (as the second part of the gas fitter’s job is to set up your caravan, so instead of you crawling under your caravan and repairing any water leaks, all you have to do is relax!) A good gas fitter would usually charge £45 for this service.

Plumbing – Drain Pipe Installation

Contrary to popular belief, you are not required to hire a professional plumber to install drain pipes underneath your sinks. No matter what the configuration, you should be able to correctly install the system yourself. In this article we will outline the necessary steps to installing drain piping.

You Will Need:
* Wrench
* Adhesive
* Putty
* Plastic Washers
* Plastic PVC Pipes
* Plastic Nuts
* Plastic Washers

Step 1: Configuration

Check underneath the sink to determine exactly which types of pipe you need. A piece will be needed to connect your drain directly to the garbage disposal or wall trap. You may even need to construct a custom piece in order to have it work with your sink configuration. All of this can be done using plastic washers, nuts, and pipes.

Step 2: Strainer

When installing drain pipes, the first thing you need to do is secure your sink basket. The strainer bottom has a small piece of pipe sticking down which you are able to connect directly to the drainage. Be sure you’re using the metal washer that comes included with the strainer. Be certain that the strainer is securely fitted in the sink and does not jiggle around. Place some putty on the underside of the sink and press it into the drain to secure the placement.

Next, use a piece of PVC tube to attach to the sink basket and fit it along with a washer using the adhesive. Apply additional adhesive to the end and slide the metal nut on the secure side before tightening with a wrench.

Step 3: Disposal Set-Up

If your sink has a garbage disposal, you need to connect the unit to the rest of the system so that any item running through the sink will then go to the disposal and through the piping.

Place a bit and wash on the disposal elbow and apply adhesive to the PVC pipe. Screw it onto the elbow. The pipe you attach to the disposal will have to be T-shaped with an outlet that is raised end. Part of it should be hanging down and can be connected to the wall to stop it from moving.

Step 4: Disposal to Wall

Place two nuts on the wall trap with one facing outward and the other toward the wall. Use an S-shaped piece of pipe and attach it to the open side coming from the disposal. Attach just as the other pieces using washers, nuts and adhesive.

History of Blue Jeans in America

Many people are aware of the roots that blue jeans have in America. They are a symbol of everything America is supposed to be: free from the status quo. It is nearly impossible to distinguish social and economic status of any individual wearing a pair of them. They are the invention of Jacob Davis, but were made famous by the entrepreneur Loeb Strauss who later changed his name to Levi. On May 7th, 1873 the patent for them was received from the U.S. Patent and Trademark Office.

Jacob Davis had invented the riveted pockets of the blue jeans at the pocket’s stress points for a customer of his pants. The customer would constantly bother Davis over the holes that developed in his pockets. It was this that gave Jacob the inspiration for the riveted pockets. He did not have the $68 at that time to file a patent, however, and wrote to Strauss offering to file it jointly with him in exchange for Strauss paying the patent filing fee.

For the next 25 years while Levi Strauss & Co held the patent rights to blue jeans, they became immensely popular among the working class. They were known for their rugged durability. Right after the exclusive patent rights expired and the invention became public domain, many companies started manufacturing blue jeans. Because in the 19th century they were worn by the working class, they were a symbol of the working man. The wealthier, pampered members of society did not wear blue jeans during this era.

During World War II, blue jeans gained the popularity overseas that they had garnished many years before in America. Foreigners admired the pants worn by American soldiers. The end result was that they were no longer solely American. Europeans and other foreigners could now enjoy the benefits of the rugged denim. Shortly after World War II with jeans now internationally recognized as a durable, comfortable pair of pants, sales skyrocketed.

Jeans were a symbol of rebels during much of the mid-20th century, up until the 1980s. Rebel figures like James Dean in movies wore blue jeans almost exclusively while the older more conservative generation did not. Blue jeans continued their tradition as a symbol of revolution into the 60s and 70s as they were the pants of choice among hippies. Jeans would become more main-stream again in the 1980s.

The 1980s were when designers started creating and labeling their own jeans. It was during this time period that jeans were a symbol of high fashion. Sales for jeans skyrocketed during this decade. They were more accepted at this point than they ever had been. Blue jeans lost popularity in the decade following the 80s as children scoffed at wearing clothing their parents wore. While blue jeans were still worn among kids, they had to be different from the traditional straight down blue denim their parents grew up in. As a result, many jeans manufacturers either had to retool their designs to keep up with the times or face possible bankruptcy.

Blue jeans continue to be worn today and still cloak the status of the wearer. Their ruggedness and durability appeal to both the poor and rich alike. Currently jeans are making a fashion comeback and the traditional jeans manufacturers have fragmented as a result of the past two decades filling various niches. Whatever path blue jeans may take, their roots are entrenched in American soil.

Being a Good Fencing Training Partner – Dry Bouts

Fencing bouts is part of any program to teach fencing or to prepare athletes for competition. Fencing a variety of partners of varying levels of ability provides opportunities to develop and carry out tactical plans, use time wisely, and apply specific techniques under realistic conditions. In many clubs bouts are fenced using electrical scoring systems. However, if your club fences a significant percentage of practice bouts dry (without electrical scoring), there are specific ways in which you can improve bouting as a training tool.

The biggest step is for fencers to realize that training bouts in the club are not their personal Olympics. Unlike competition, where winning each point is critical, practice bouts are fenced to improve performance. This requires a different mindset. Yes, you want to beat your opponent and maximize your training value, but you also want the opponent, your teammate, to maximize his training.

First, any hit should be immediately acknowledged. A dry hit that you feel may not cause the scoring machine to register a hit in competition. And a hit that feels like a slap may result in a hit. Although experienced fencers can tell most of the time, it is not an exact science. Either one means that a potential hit got through the defense. Let the fencer whose point arrived decline the hit if she feels it was too light, a slap, etc.

Second, don’t argue about right of way in foil or sabre. Have a team member referee. Even if all the referee does is call who makes the attack, your fencing now has to convince a third party, just like it does in the competitive bout. This steps up the speed of the bout and moves its rhythm closer to that of competition. Now you have to practice your drill for your use of the period between “halt” and “fence.”

You will find that steps 1 and 2 take you from 15 minutes to fight a bout down to 3 to 5, so you can fence more bouts during your practice time.

There are two important side benefits. Developing the ability to interpret the action from the referee’s position will help you understand what the opponent is doing when you are fencing. And some of those who serve as practice referees will develop as competent referees for competitions.

Third, if you are the stronger fencer, fencing weaker fencers is not a waste of time. You are serving as a training partner, so fence at a level that will stretch, but not overwhelm, your opponent. Use the bout to perform your actions more slowly with a greater concentration on perfect technique. Another alternative is to use the bout to practice a certain combination of technique, distance, and timing, making all of your attacks with a specific movement. If you are the weaker fencer, fencing against a stronger fencer will result in a loss, but it will also force you to speed up and focus your game to come as close as you can to the challenge presented by a more experienced fencer.

Fourth, fence, don’t socialize or rest or… The average pool of 6 fencers takes somewhere around 90 minutes to fence in foil or epee (shorter in sabre). During that pool you fence 5 bouts. If you work you can fence 12 to 20 dry bouts in the same time period (in one 2 hour period in my salle’s annual Fence ‘Til You Drop New Year’s Day event, the winner fenced 42 bouts). More repetitions and increased physical training are the result.

We fence in competition exactly the way we train in the lesson. So be a good training partner – maximize your training and your partner’s training by eliminating quibbling about who hit whom, using the bout to stretch your skills and those of your opponent, and fencing, fencing as much as you can. In the heyday of German international success their fencers were reported to be fighting 200 bouts a week. For the average fencer that is an impossible goal. But the more you fence, and the better you use the experience, the better fencer you will be.