Enjoy Luxury Stay at 5 Star Hotels in Delhi

During the crucial days of vacations, traveling to a place where the soil has witnessed a marvelous journey from historic glory to modern splendor would surely a pleasurable experience for any travel vacationer. So, gain this special experience by touring to Delhi, which is truly ‘the heart of India’. This magnificent place has been blessed with natural attractions where a number of tourists from around the world come and accumulate memorable days of their life. While living the grandeur of this pristine destination, the travelers would require a comfortable accommodation and 5 star hotels in Delhi, like given below, are always welcome you with great Indian hospitality.

Ashok Hotel New Delhi

Enjoy the beauty of luxury accommodation at the state-of-the-art premises of Ashok Hotel. It is a marvelous property in which staying, even for a day or two, can provide you experience of lifetime. The hotel is largely popular among the business travelers across the world because of its ideal location at the capital city. It is nestled in proximity to both international (15 kms) and domestic (10) airports along with the commercial and shopping hubs of the city like Connaught Place and Pragati Maidan. While staying at this beautiful hotel, you can easily travel across the city through the way of metro train, bus or your own vehicle.

Taj Palace Hotel New Delhi

Taj Palace Hotel is one of the best five-star properties that located at the capital city of India. It is dedicated to provide quality accommodation services to its worldwide guests through the beautiful concoction of warm Indian hospitality and modern staying amenities. The accommodation at this chic property is spread across its well comprised 402 rooms including Rooms, Taj Club Rooms, Suites, the Presidential Suite and Tata Suite. Each of these rooms and suites is fully adorned with the facilities like king size bed, tea/coffee maker, in room fax machine, work desk, LCD TV, DVD player and many more. Staying at such accommodation would be pleasurable experience for any guest.

Hyatt Regency New Delhi

Hotel Hyatt Regency is the perfect place where you have home staying like feeling. Situated on the sprawling location at the heart of India, it makes sure a memorable stay to its guests by offering them delicious Indian and international cuisines at the well modernized restaurants. This elegant property has possessed award winning restaurants and bars such as the China Kitchen, Aangan, La Pizza, Polo Lounge, Café, China Kitchen Bar, etc. The courteous staff at these dining places of the hotel serves mouth watering food items from varied parts of the world along with fine collection of wines and spirits. The guests can also tap their feet on their live entertainment.

Radisson Blu Plaza Delhi

Th hotels is perhaps the best place at the capital city where the business travelers can easily host their special events. As a major part of Radisson Blu Hotels & Resorts, this lavishing property has been popular as the leading business hotel in this incredible city. Its banquet hall like Crystal Room has large space where you can invite around 800 people and can be divided into five meeting rooms of different sizes. This pristine conference venue at the hotel boasts of ample modern amenities such as audio-visual equipment, large TV screens, wireless internet access, business centre and many more.

The Oberoi New Delhi

Welcome to the Oberoi Hotel! It is a magnificent illustration of palatial accommodation that adds more charm into the beauty of this amazing place. Every year, a number of travel vacationers from India and foreign countries come to the capital city and preferred to stay at this elegant property. There are the modern amenities and services at this hotel that entice tourists to sojourn here. Facilities like safety arrangements, 24 hour business centre, multi-cuisine restaurants, personal butler service, travel desk, valet parking, swimming pool and many more guarantee the comfortable as well as memorable stay of the guests at this pristine place.

Taking joy of traditional Indian hospitality is an experience in itself. These five star hotels in New Delhi are exactly the place where anyone can easily have this memorable experience. Right from the entrance to their sprawling premises, you will enjoy typical Indian way of welcoming the guests that beautifully complimented by modern infrastructure.

How to Plan and Organize a Mission Trip

1. Promote, Promote, Promote – Start Spreading the Word As Soon As possible!

  • Talk With Your Pastor – Ask his blessing and help in promoting your mission trip. Ask him if he would promote and talk about the trip from the pulpit.
  • Put Announcements in Your Church Bulletin – Announce it up front, promote it from the pulpit, call people, talk to people; ask for stories of people who have already gone on a short-term mission trip, do a skit, do whatever you can to get the word out.
  • Put a Sign Up Sheet In The Lobby of Your Church – Put out a nice, attractive, sign-up sheet in a well-known spot and encourage people to sign up if they’re interested in going. Your first step is to throw wide the net and gather all who have any interest.
  • Put Together an Information Trip Packet – Along with the sign-up sheet, if you have the capability, put together a mission trip packet that answers as many questions as you can think of. This will provide information prior to your information meeting to better inform those interested.
  • Set a Date For an Information Meeting – About one month after you have started promoting the trip, have an information meeting to inform those interested and to answer everyone’s questions. Some issues to cover would be; finances, food prep, Vacation Bible School prep, trip schedule, meeting schedule for trip planning, and etc.
  • Announce the Procedure for Group Registration – As part of your meeting, let those at the information meeting know how to get on board. It works well to set a $25.00 or more non-refundable registration fee for group registration. For some reason, money firms up decisions.
  • Establish the Total Cost – Take into consideration travel, insurance, food, and other costs. Take into account the three following factors in planning your trip that need to be decided that will affect your trip cost:
  • Food Costs – Try to calculate what food cost will be. Think about things like food while traveling and food on your mission trip.
  • Building Materials for Work Projects – Some mission organizations provide building materials as part of their fees, others do not. Be sure to check this out as it could be a huge factor affecting your total costs. For many teams, helping out with building is a major part of their trip and experience. It also helps those you go to serve as well.
  • Ministry Costs & Plans – Will you do ministry outreaches? Take into consideration costs for Bibles, Tracts and Vacation Bible School supplies.

2. Establish Your Group!

  • Set Up Your Meeting Schedule for Group Preparation & Training – You will normally need a minimum of about 6-8 meetings to allow adequate time for Vacation Bible School and ministry prep. Don’t forget your spiritual prep which is the most important of all.
  • Set Up Money Due Dates – Set up a schedule for Team Members that lets them know when their funds are due for your mission trip.

3. Establish Your Mission Trip Prep. Meetings & Schedule!

Here are some items you might want to consider in your mission trip prep meetings:

  • Fund Raising Help and Ideas for Team Members – An important part of making your mission trip happen is fund-raising.
  • Vacation Bible School Prep – Most mission teams do Vacation Bible Schools on their mission trips.
  • Community Outreach Prep – Also, mission teams do Community Outreaches. You might want to come prepared for that as well.
  • Testimony Prep – A great way to help others is by sharing your testimonies.
  • Meal Prep – If your trip includes your own food prep, an option to consider if you don’t have a cook, is to designate a kitchen and meal coordinator to oversee the meals and kitchen. Divide the group into food teams and allow them to plan the meals (with the oversight of the kitchen and meal coordinator). Some meals can be pre-cooked then prepared on site if your mission trip is not too far away. Make sure you have healthy meals as you will be exerting extra energy while on your trip.
  •   Lodging  – Be certain to know what your  lodging  accommodations will be like. You obviously want a safe, somewhat healthy environment for your team. It’s okay to suffer some, but if you can transfer the energy you would expend on suffering into effective ministry then that’s ideal. If we’re called to suffer then we should, but if we don’t have to do so unnecessarily then that’s better.
  • Spiritual Prep – Don’t neglect this important area. Without right hearts we have nothing to offer. One of the great benefits of a mission trip is that you have a wonderful platform for discipleship training. The trip can serve a much larger purpose than the time you’re serving. Try to get as much mileage out of your discipleship training time as possible and think of ways to disciple and use the group or individuals upon returning home.
  • Paperwork Prep – It’s good to start early if some don’t have Passports. It can take up to a couple months to get them so let your team know up from so they can get started on them. Passports are now required (with some exceptions) for re-entry into the U.S.
  • Training Prep – Don’t forget you’re going to be ministering cross-culturally and you need to prepare your team for this. There are many tools for doing this on the Internet. Please look at the resources links below for help in this area as well.
  • Safety Concerns – It’s common for folks to be concerned with safety on a mission trip. While sharing the Gospel is never risk free and we should have the faith to trust God will protect us, we shouldn’t be foolish as well and put ourselves into harm’s way if we don’t have to.

4. One Month Prior to Trip Departure!

  • Double check your Master Checklist – Make sure you’ve covered all your bases and nothing is forgotten.
  • Order Bibles and Tracts – If not already done yet, make sure to order Bibles and Tracts for your ministries.
  • Vehicle Insurance – Take into account you might need vehicle insurance for your mission trip if you are traveling by land.
  • Daily Devotionals – During the week of your mission trip, it’s great to have group devotions each morning.
  • Group Tee-Shirts – If you would like, you can design your own tee-shirts for your mission trip. This can be very valuable and act as a great keepsake and reminder of God’s work in each person’s life.

5. Final Departure Plans!

  • Paperwork Checklist – Make sure you have all of your paperwork and passports in order. Important note: We recommend that all paperwork be kept in a briefcase or etc. in the possession of the leader at all times as folks can easily lose their paperwork.
  • Review the Master Checklist – To be sure you’ve remembered everything.

Helpful Links

GoMissionsToMexico.com – Ministry Offering Safe Affordable Mission Trips to Mexico!

Mercedes Benz Alternator Parts Replacement


Alternators & Regulators Bosch with internal regulators


Alternators made by Bosch are conventional 3-phase, self-rectifying type alternators.

Bosch 75 through 55-amp alternators use3 negative 3 positive and diodes connected to stator windings to rectify current, Bosch 90 and 80-amp alternators use 14 diodes.

All alternators use 3 exciter diodes connected to stator windings, while the engine is running these diodes turn off the alternator indicator light and supply power to the voltage regulator, Bosch regulators are transistorized solid state and integral with alternator.


Model Volts/Amps

(1) Manufacturer’s Part No.

190E 14/70 489 928

190D 14/70 489 897

All Others 14/70 N/A

(1) Bosch alternator part numbers are preceded by the numbers 0 120 or beginning with an AL lettering a number and ending with an X.

1. You can connect a voltmeter to the alternator “B+” terminal and ground, voltmeter should indicate battery voltage, if not check wiring between battery and alternator.

2. Turn ignition on and check that alternator indicator light comes on, if light does not come on, check wiring between warning light and alternator, including indicator bulb.

1. Ensure connections at battery, alternator, and starter are clean and tight, ensure alternator engine and body are properly grounded, ensure alternator belt is tight and in good condition.

2. Connect ammeter following manufacturer’s instructions, connect voltmeter leads to battery terminals.

3. Start engine and run at 3000 R.P.M. adjust carbon pile to obtain maximum alternator output, do not allow voltage to go below 12.6 volts.

4. Alternator output should equal alternator rated output, minus 16-20 amps, if reading is 16-20 amps below alternator rating, replace regulator and retest, if output is still too low, repair or replace the alternator.


1. Connect ammeter following manufacturer’s instructions, connect voltmeter leads to battery terminals, run engine at 3000 R.P.M.

2. Run engine until voltage stops rising, voltage should be 13.5-14.5 volts, if reading is incorrect, remove regulator and ensure brushes are longer than 6 m.m..

3. If brushes are okay and regulator fails to keep voltage within specified limits, replace regulator and retest, if voltage is still incorrect, repair or replace alternator.



1. Remove nut, lock washer, and pulley, remember position of spacers, Then remove fan assembly and key, scribe mark on front and rear   housings , remove voltage regulator and remove screws, separate front and rear  housings .

2. Disconnect capacitor from terminal; remove nut, insulators, screws and washers.

Remove stator assembly.

3. Unsolder stator from diode assembly; remove bearing wave washer or o ring from rear of  housing .

3. Support front  housing  and carefully press out rotor, do not allow rotor to fall, remove screws securing bearing retainer, remove retainer front bearing and seal remove rear bearing from slip ring at end of rotor.


Diode Assembly

1. Place ohmmeter scale on x100 scale connect ohmmeter leads across “B+” terminal and 3 stator terminals one at a time, reverse leads, ohmmeter should indicate continuity in one direction only.

2. Reconnect ohmmeter leads across negative and 3 stator terminals one at a time.

Reverse leads; ohmmeter should indicate continuity in one direction only.

3. Connect ohmmeter leads across “D+” terminal and 3 stator terminals one at a time.

Reverse leads, ohmmeter should indicate continuity in one direction only, if diodes are found to be defective, replace the diode assembly.

Fig. 3: Diode Assembly Test Diode assembly for 55 amp alternator is shown, others are similar.

1. Place ohmmeter on lowest scale, connect ohmmeter across stator leads, resistance between leads should be 14 15 ohms for 55-amp alternator and .09 10 ohms for 65 through 90 amp alternators, if resistance is incorrect, stator has open or shorted windings and must be replaced.

2. Place ohmmeter on X 1000 scale. Connect ohmmeter between stator core and stator lead, no continuity should exist, if continuity exists, stator is grounded and must be replaced.

1. Place ohmmeter on lowest scale, connect ohmmeter across slip rings, resistance should be 3 4-3.75 ohms for 55 amp alternator and 2.8 3.1 ohms for 65 through 90 amp alternators.

2. If resistance is too low, rotor has short circuit and it must be replaced if resistance is infinity no continuity, rotor has open circuit and must be replaced.

3. Place ohmmeter on x1000 scale, reconnect ohmmeter between either the slip ring and rotor core, no continuity should exist, if continuity exists, rotor is grounded and must be replaced.

4. Clean slip rings using a very fine sandpaper, rings which are worn or pitted should be turned on lathe, minimum ring diameter is 1 1/16″ 26.8 m.m. if slip rings are beyond repair, replace slip rings as outlined in steps 5 and 6.

5. Remove rear bearing from slip ring end of rotor, unsolder wires from slip rings and bend up ends of rotor winding, pull off slip rings, ensure ends of rotor winding are not damaged.

6. Insert the ends of rotor winding into slip ring and press new slip ring onto rotor, slip ring end must be 9/64″ 3.5 m.m. from end of the collar, solder rotor winding to slip ring terminals, turn rings on lathe and retest rotor, maximum slip ring run out is 0012″.03 m.m..

The Bearings

Always replace bearings, if replacement front bearing is sealed on one side only, open side must face rotor, if replacement rear bearing is sealed on one side only, open side must face away from rotor.


Ensure brushes are longer than 6 m.m. replace if necessary, unsolder brushes from voltage regulator, solder new brushes, and do not allow solder to run into strands of brush leads.

Brush must be free to slide in holder with normal spring tension of 10-14.


1. Install the bearing, retainer, and screws in front  housing , press rotor onto  housing .

Press bearing on slip ring end of the rotor, solder stator to diode assembly, exercise care when soldering near diodes due to possible heat damage.

2. Install insulators on stator assembly, assemble stator assembly and rear  housing , install wave washer or O ring in rear  housing , align the scribe marks and assemble front and rear  housings .

3. Install key, fan assembly, and spacers, install the pulley, lock washer and nut, tighten nut to 23-29 ft. 3-4 Nm. Ensure rotor spins freely, and install voltage regulator and capacitor.

Five Ways To End Writing Procrastination Forever

Are you procrastinating in your writing career?

I vowed to end my procrastination on the day I received an email message from an editor who’s the boss of a magazine I write for. “Sorry. Wish you’d sent the query to me yesterday; I’ve just contracted someone else.”

I *loved* that idea. It was a great idea, because it lent itself to a series of articles. And I’d had it lying on my desk for a couple of weeks. Why didn’t I write a proposal for it and send it instead of procrastinating? It would have taken ten minutes, maximum, and that was precisely the reason I left it. “Won’t take a moment, I’ll do it later,” I thought.

Procrastination can cripple your career. If you’re a creative small business owner — and yes, writers are creative small business owners — it can send you out of business.

I have a friend who’s an excellent copywriter, but she’s a hopeless business person. Rather than send out an invoice as soon as she’s completed a project, she lets them pile up. She lost several thousand dollars last year when a company suddenly folded with her latest invoices unpaid. (A couple were unsent.)

There are any number of reasons why people procrastinate. Most boil down to anxiety and perfectionism. Once you recognize these two demons for what they are, you can manage them with a few simple tools.

Let’s see how.

=> One: Lighten up

I don’t expect all my writing projects to be fun. In fact some of my copywriting work would be boring and frustrating if I allowed myself to feel that way. How interesting are industrial pumps,   concrete   reinforcing  mesh, or dog worming products, after all?

Nevertheless, it’s possible to have fun with ALL your creative projects if you’re determined that it will be fun for you.

How do you make it fun? Here’s how:

* Develop a intense focus on your current work. Just focus on it, to the exclusion of everything else. Attention is the secret.

* Relax. Get up and stretch every half hour if you’re sitting at the computer. While you’re working, deliberately relax all areas of tension you find in your body. Tension builds up and causes stress.

=> Two: Accept creative anxiety

Creative work comes with built-in anxiety. However, it’s possible to reframe it. What if you told yourself that you’re not anxious, you’re excited?

Take several deep breaths, close your eyes, and completely relax. That is, see where you are tense in your body, and let go of any muscular tension in those areas.

Smile. Not a big, fake grin — aim for a small, contented smile.

Now tell yourself that you’ll just do today’s work today. If you’re working on a long project, like a novel, tell yourself that you can quit after five minutes, if you wish. You can put up with anything for five minutes.

You’ll be amazed that your fear will dissolve. What’s left is genuine excitement.

=> Three: Drop perfectionism

The truism: “If it’s worth doing, it’s worth doing well”, is nonsense. Who’s the judge?

Just do your work. Be satisfied if you get words on paper or on the computer screen.

Your first attempts at anything will be crappy. That’s fine. Crappy is excellent for a first draft.

Just get something on paper.

=> Four: Do it YOUR way, not the way it “should” be done, or the way anyone else does it

Everyone has their own way of working. Someone else’s way will not be your way. Do it their way until you find the best way for you.

For example, let’s say you’re writing a novel. There are dozens of ways to write a novel. You can just start writing, and write your first draft straight through. You can use various forms of outlining, like using index cards.

You do it your way. Chisel it into stone if you wish. Write it on antique vellum. Write at midnight, during your lunch hour, at 3am.

Whatever way you choose, do it YOUR way.

=> Five: Ask yourself what your intention is

Intention is everything. Before you begin a task, always ask yourself what your intention is. Write your intention down.

Unspoken, unacknowledged and unrealistic intentions lead to procrastination.

For example, if you’re writing a magazine article, what’s your intention? It could be to get 400 words written in the next couple of hours. OK, write that down as your intention.

Without that written intention, unacknowledged, amorphous intentions floating around in your head could include —

* to make a dollar a word for this article;

* to become famous;

* to prove to my family that I can write; etc.

Who knows what’s floating through your mind?

Nail your intention. Write it down. It relieves your anxiety, because your written intention is always realistic. Hopes, desires and other clutter floating around in your consciousness builds anxiety.

There you go. Now you know how to use five methods to eliminate procrastination forever.

Understanding Concrete Formwork Pressure

It is important to know and understand the factors that can affect concrete formwork pressure to ensure a successful pour. When placing concrete, we will consider the different factors that play a role in determining the placement rate and height of pour.

Unit Weight of Concrete

The unit weight of concrete, which can vary geographically, is typically 140 to 150 pounds per cubic foot. Concrete weighing less will have a lower concrete form pressure, while concrete weighing more will increase the pressure.

Height of Concrete Pour

Height of concrete pour means the total height of the wall that concrete is being placed during one pour. concretepressure=unitweightxheight

If the concrete is not achieving initial set between lifts, then this is what the concrete formwork pressure would be. Ideally, it is good practice to place concrete so that each lift reaches initial set.

Setting Time

The following factors will affect concrete set up time. Once concrete is set up there is zero concrete pressure.

  • Concrete mix chemistry

    – This affects the concrete formwork pressure. Factors include: cement type, slag or fly ash and retarders

    – all of which increase formwork pressure. Subsequently, accelerators speed up the setting time and reduce pressure.

  • Concrete temperature

    – Higher temperature equals shorter setting time. The ambient temperature will affect the concrete temperature; therefore, one would use a slower rate of placement in the winter.

  • Vibration method and depth

    – Any consolidation method, internally or externally, should be done by lift. Disturbing the lift will affect the set up of previous lifts, increasing the unset height of the concrete, creating greater formwork pressure.

  • Rate of placement and method – This affects the concrete pressure

    – slow placement results in less pressure. The rate of placement is in feet per hour.

    Example: If concrete was placed in a 10foot wall and it took two hours; the placement rate would be 5 feet per hour.

  • Concrete flowability

    – Concrete with a slump of 7.0 or greater, as well as self consolidating concrete (SCC), has no initial setting time.

  • Wall thickness

    – In theory, the wall thickness does not affect concrete formwork pressure; however, a narrow wall may produce lower pressures due to bridging effects.

In summary, the main factors that will affect the concrete formwork pressure include the rate of placement, concrete mix and temperature. Generally, the rate of placement should be lower in the winter than summer. Essentially it doesn’t matter how many cubic yards are placed per hour or how big the project is. What matters is the rate of placement per height and time (height of wall poured per hour).

This information is intended to provide knowledge that can then be used in the decision making of placing concrete by being cognizant of the different factors affecting the concrete formwork pressure.

Cast Iron Radiators Back in Fashion

Cast iron radiators are an increasingly popular home improvement. An otherwise plain and boring household item is transformed into an objet d’art, creating an instant and stunning visual effect. This is an easy and cost effective improvement to your family home.

It is usual to have radiators attached to a heating source as a means of heating a house and these are generally flat white panels that take up wall space. Often hidden behind sofas or other furniture, these panels are purely functional, simply heating the room when the boiler is on and rarely given a second look.

It is now becoming fashionable to install cast iron radiators, and make a feature of an otherwise utilitarian object. With a wide range of designs, and a size exactly matched to your room’s BTU requirement, these ethereal and sophisticated radiators add much more than just value to your home. Cast iron radiators have been around for nearly two hundred years and fell out of fashion in the 1970s when the trend was very much for plain and square rooms. Victoriana and Edwardian features were removed in their droves from family homes to go with the trend at the time. This meant a lot of cast iron radiators went to the scrap yard.

With today’s fashion being more about making your house into a home, it becomes important to include objects of beauty and the radiator is now in focus as the next home improvement. After all, why have a plain white flat panel when you can have a sumptuous and stylish objet d’art? Available in many styles, these authentic reproductions of the Victorian and Edwardian designs can range from the pure and simple lines of the Princess Cast Iron Radiator to the elegant decorative finish of the Daisy Radiator.

The Daisy design first originated in France in the 1890’s and was particularly popular in the Parisienne circles where ornate was the fashion to have. Depicting an elegant floral pattern from the foot to the crown, this radiator is now a popular addition to stylish homes. The Cherub design is also highly regarded as ‘a la mode’ due to its intricate pattern which includes flowing lines, cherubs, lions and dragons. Any of these elaborate radiators can be finished in any colour paintwork, or highlighted to bring out the amazing details. These also look stunning when left as a polished finish.

If ornate is not your scene and you are looking for the beauty of a cast iron radiator without the ‘fussiness’ then look for the Princess or the column radiators. These can either be painted in any colour that you chose, or highly polished to give an eye-catching detail to your home. The column radiators also come in a wide range of heights allowing them to be used in almost any situation; the small ones might fit below a low windowsill, the tall ones might fit between a bath and a hand basin. The flexibility of size and design means that you do not have to compromise on your heat requirement, or BTU, for your room.

Bathrooms can also be given the ‘ornate radiator make-over’ by purchasing a towel rail specifically made to your exact requirements. The towel rail can include ornate or column sections to match the rest of your home, and these sections can be painted or finished in any way that you wish. You can design a towel rail that is unique to you, and enjoy the gentle and long lasting heat effect of cast iron.

Traditional Designs include on their website a helpful BTU calculator to enable you to design the radiators you need for each of your rooms. They also offer a home visit service so that you can appreciate the quality and elegance of these cast iron radiators and see how good these will look in your own home.

Cast iron radiators have the benefit over flat panels of not just beauty, but also of heat dissipation. Being of a much denser mass than the thin steel of panel radiators, these retain the heat and dissipate it over a much longer period after the heating source has been turned off. Effectively, they have a much flatter heat curve and heat a room more gently and for longer than a flat panel. The installation of a cast iron radiator is a simple job for a plumber, especially if it is a straightforward replacement of a flat panel. It is just necessary to ensure that the size of your new cast iron radiator will fit into the space vacated by the flat panel. To complete the look, Traditional Radiator Valves supply a range of superior valves, hand made in the UK and honed from solid brass.

The Buckingham Major Thermostatic Radiator Valve range is the latest design in valves to compliment cast iron radiators; the quality of these valves is unbeatable. It is only by comparing a Traditional Radiator Valve with an imported cast brass valve that you can appreciate the enormous difference in quality. The thermostatic mechanism works smoothly without that grating feeling, the wheels are crafted from walnut instead of being plastic, and the weight of the valves indicates the solidity of the design. These valves are built to order to cover any installation layout, and any sized pipework. Available in manual or thermostatic, depending on the room in which they are to be installed, a cast iron radiator would not be complete without a tastefully designed valve set to finish the look to perfection.

Once the cast iron radiators are chosen and installed, not only will your home be the envy of your friends and neighbours, but you will notice the heat generated from the radiators continues to warm the room for some time after the boiler has shut down. The new look that it gives to your home also improves its resale potential. Faced with two similar properties, one with flat panels and the other with stylish cast iron radiators, a potential buyer will, more than likely, chose the more elegant and sophisticated home. So not only are you making your home a more beautiful place to live, with a smoother and gentler heat curve; you are also improving your chances of moving up the property ladder if and when the time comes.

Winter Home Maintenance Checklist

For most of us our homes are our most valuable asset. Now that fall is upon us and it is the perfect time to do a thorough inspection of your home. Detecting and correcting problems before they become emergencies can save time and money. Making your home more energy efficient can help reduce high-energy bills, improve comfort and help protect the environment. Use the following list when you inspect the interior of your house.

1. Attic: Look for evidence of roof leaks, also openings that permit entry of bats, rodents or other pests; inspecting insulation, rafters, ventilation openings, chimney and side walls.

2. Windows: Check for difficulty of operation, cracked or broken panes, faulty or hard-to-operate locks and worn weather stripping.

3. Bathroom: Note dripping faucets, leaking showerheads, malfunctioning flush valves, inadequate hot-water supply.

4. Walls and ceilings: Examine painted surfaces and wallpaper; look for cracks, holes, or bulges in plaster, signs of loose tape on wallboard.

5. Floors: Inspect for loose, creaking boards, worn areas, cracked and chipped baseboards and moldings, broken or missing floor tiles.

6. Staircase: Note loose, squeaking treads, shaky handrails and posts, cracked or broken balusters.

7. Air conditioners: Increased dust could be a sign that it is time to change your air filter or that your ductwork is not well sealed. Take out and clean filters, inspect ducts and cover air conditioner for winter.

8. Doors: Inspect for sticking or sagging; examine locks and chains renew worn weather stripping.

9. Fireplace: Check dampers, firebox, hearth, grate, andirons, screen and mantelpiece.

10. Kitchen: Examine appliance wiring; clean the ventilator fan and remove accumulations of dust and grease.

11. Doorbells: Test all sonic apparatus, chimes, buzzers, burglar alarms.

12. Furnace: Check for leaks in pipes, flue firebox, examine damper, replace filter, and test thermostat operation.

13. Electrical system: Look throughout the house for frayed cords, loose connections, malfunctioning switches and outlets.

14. Plumbing: Check drains, traps, main drain, water line and shutoff.

15. Basement in general: Look for signs of dampness, leaks, cracked or broken floors, cracked walls. Pay special attention to joint between floor and walls; this is where most basement leaks develop.

16. Basement pipes: Check all cold-water pipes in the basement. Wrap tem with insulating material to prevent sweating and subsequent dripping during hot summer weather and possible freezing in winter.

17. Windowsills: These take a beating, especially those that face the southern sun. Inefficient windows or high indoor moisture levels from air leaks can result in condensation, frost or pools of water on windows and sills. Sand and paint them. You can make your windowsills maintenance free by covering them with a plastic laminate.

18. Beams: Make sure there is no space between a beam and the main house girder.

A neglected home is a house on the way down, in livability, looks and value. A well maintained home will reduce heating costs, prevent damage from insects, pests and rodents and make your house a safer home. Toro Builders, Inc. is a great source of information about home repairs, property maintenance and new additions.

Versatile Uses of Steel Beams in Home or Office Construction

The construction has expanded leaps and bounds. The use of metal and steel in residential and commercial sector is a mandatory option for enhancing the durability and worthiness of homes or industrial units manifold. The introduction of steel beam structures for relative expansion of the buildings with modernised techniques and architectural designs is a common practice in the industry.

The use structural beams to manage the virtual strength of buildings entirely depend on user’s preference. Steel, being durable works perfectly to enhance the reliability of the living area exactly the same way wooden beam does. The aesthetic benefits of steel beam may overpower wooden frames shortly to give the desired area a strong foundation.

These beams perform variety of functions for several commercial and industrial projects. Its utility is common in every sector. Let us know how?

Roof building: Roofs forms an integral part of any of the house or office construction. It tries to hold the entire setup of home or office buildings onto its shoulders. Thus, it acts responsibly to take up the full weight of erection area on ceiling beams. Alike wooden beams it works wonder to carry the same load. Rather the roofs anchored with steel beams are stronger than wooden ones.

Wall Making: steel structures are highly compatible for wall frames compared to wooden walls. It takes less space for framing and offers great space to insulation, plumbing, wiring, cooling or heating ducts. Steel beams being sounder and firm doesn’t warp, swell, rot, bugs or splinter.

Overcome natural disaster: The major test for steel strength may be witnessed from the situation or circumstances arise due to unknown incidence to fire, water and air. The wooden material used in home or office construction may prone to disastrous accidents. However, the steel remains safe and secure from unknown mishaps caused by natural surroundings.

Steel Homes: There exist companies ready to offer scintillating designs, materials and knowledge towards making homes or offices using metal works. They are as same as wooden houses from inside as well as outside. All the homes may have customized designs and structures for respective floor plan along with conventional and non-conventional sidings and strong foundation with a basement facility.

Worthy and Reliable: The virtual benefits of steel bar for construction purposes cannot be deny by anyone. Either it is home or office building flourishing on the large or small-scale; the steel beams hold great prominence in its building process.

So, when are you planning to incur the versatile features of steel supplies in residential or commercial zone?

Airbrush Nails – How to Get the Perfect Airbrush Nails

Nail art is a great way to make your nails stand out and look beautiful. While you can use traditional nail polish to make some unique nail arts, why not use more sophisticated techniques and make airbrush nails instead.

Similar to airbrushing plastic toys, t-shirts and other items, you can airbrush nails. To turn your nails into your own little canvas all you need are some stencils, your acetone, a base-coat, different colored nail polish, a top-coat and of course a simple airbrush machine setup which includes an airbrush gun attached to an air compressor.

Start here

The first step to getting airbrush nails is to have your designs in stencil. You can either make your own design and stencil it yourself or buy a custom made stencil from stores or nail salons. Choosing which design is simply a matter of preference.

Preparing your nails

After you have your stencil design, you have to prepare your nails so your airbrush nails last longer. Wash your hands and fingers, including nails of course, with soap and scrub the nails with a brush. Using nail polish remover or acetone, make sure to remove any remaining nail polish or oil left behind from your previous nails manicure. You also want to make sure your nails are perfectly clean from any other impurities such as dirt so keep a napkin or towel in hand just in case.

Base-coat, airbrushing and Top-coat

Using a brush apply the base-coat onto the nail, then for an even background and overall look, apply a white background or a color of your choice before adding the other colors. Once you’ve applied the background color, you can get your stencil ready by placing it on top of the finger then using your airbrush gun airbrush your nails one color at a time. After you are done with airbrushing your nails, remove the stencil and with the nail polish remover or acetone, clean the parts of your finger that have unwanted or stray color on it.

 Final step

One final step before you can enjoy your airbrush nails is to apply the top-coat. This top-coat must be carefully brushed onto the just airbrush nails using a very light stroke because the paint is still very fragile, and you might leave brush strokes behind if you are not delicate enough. Another reminder is to not repeatedly stroke the nail. An ideal application would be to have the whole nail coated with the top-coat in less than 3 strokes, then fan dry for a minute or two to finish.

Varnish optional

Another way to avoid the risk of ruining your airbrush nails by leaving brush strokes as you apply the top-coat is to apply varnish right after airbrushing your nails. This goes before the top-coat and is a water based clear coat that is sprayed in a mist over the airbrushed colored paint. This varnish creates a protective barrier between the paint and the top-coat, allowing for easier top-coat application.

And there you have it. Your very own beautiful airbrush nails. As with other arts, mastering airbrush nails takes some practice. So how about practicing on your friends and family or even make some money from airbrush nails.

Architecture Through the Ages

CLASSICAL – a style developed by ancient Greeks and Romans. Classical buildings are made by layering stones on top of one another or by placing beams across columns. Classical buildings often include arches, domes and vaults.

Example: Pantheon; Rome, Italy; completed around 128 A.D.

GOTHIC – a style that began in Europe in the 12th century and features pointed arches and windows. In Gothic architecture, windows and glass are often painted with fancy stone works.

Example: Reims Cathedral; Reims, France; built between 1211 and 1311.

RENAISSANCE – a style developed in the early 15th century that shows a return to the more classical styles of ancient times. Renaissance architecture was a move away from the fancier Gothic style and often times includes carved statutes built into the walls and within aches and buildings.

Example: St. Peter’s Basilica; Rome, Italy; built between 1546 and 1590.

BAROQUE – Beginning in the early 17th century in Europe, architects and designers designed ornate buildings, which means that the building had flowery details and flashy decoration. This style was so popular through the 18th century.

Example: the Palace of Versailles, France; built between 1661 and 1710.

NEOCLASSICAL – This style is yet another return to the classical style after the extreme decoration of the Baroque period.

Example: US Capitol Building, Washington, D.C.; begun in 1793, and added to, rebuilt, repaired and renovated many times since.

MODERN – Popular in the 1920’s, modern features includes spare, useful designs made of steel and glass as well as sleek stone.

Example: Bauhaus Building; Dessau, Germany; built in 1925.

ART DECO – Developed in 1930’s, this style features stylized metal works on stone.

Example: Chrysler Building; New York, New York; built in 1930.

Some Modern Day Buildings

The Guggenheim Museum; New York, New York; completed in 1959.

Fascinating features:

Most of the building’s exterior was created without corners.

Visitors never need to retrace their steps. They can take the elevator to the top floor and walk down a circular path, seeing each object of art just once.

When the building opened, some artists criticized the building, saying that the building is more exciting than the artworks inside.

The Guggenheim Museum; Bilbao, Spain; completed in 1997.

Fascinating features:

Its curved walls catch and reflect light. At anytime of the day, different sides of the building reflects sunlight.

Situated in a port city, it is designed to resemble a ship.

It is made of glass, titanium and limestone.

The Hearst Building; New York, New York; completed in 2006.

Fascinating features:

The Hearst Building was built oven a stone 1928 landmark building.

It uses 25% less energy to run than other similar-sized buildings.

To create its grid like design, builders used 20% less steel than is normally used for a building this size.

The Burj Dubai (Dubai Tower); Dubai, United Arab Emirates; completed in 2009.

Fascinating features:

At 2,717 feet (828 meters), the Burj Dubai is the world’ tallest building and the tallest man-made object ever. Its 78th floor swimming pool is also the world’s highest swimming pool. More than 5,000 workers had taken part in the construction of the tower. Designed to house more than 35,000 people, the construction features hotel rooms, apartments, offices and other spaces.

Pony Saddles – The Parts of a Saddle

A pony saddle is made up of various parts, the names of which can be confusing. If you are serious about pony riding you should be familiar with how a saddle is made. The following will help you to tell your cantle from your pommel and your tree from your flap.

The Saddle Tree is the foundation of the saddle and can be either of two kinds – rigid or spring. A spring tree is generally used in English saddles, and a rigid tree in Western saddles. For spring trees the shape is created from a base constructed from thin plywood, layered over with fibreglass for strength. Steel strips placed beneath the saddle from front to back give the spring.

For a rigid tree a wooden base covered in leather is used, or alternatively a fibreglass base with wooden shavings Steel plates are attached underneath the tree for further reinforcement. Some saddles, called treeless are made without a rigid base, having a fibreglass pommel and cantle instead.

The Pommel is found at the front of the saddle and is the part that fits over the pony’s withers.

The Cantle is the part that rises at the back of the seat.

The Seat is where the rider sits and is the depressed area in the middle of the saddle.

The Stirrup Leathers are the adjustable leather (or sometimes webbing) straps that are attached to horizontal bars under the skirt and are used to hold the stirrups.. These bars are made in two pieces,a bar and a movable catch to secure the stirrup leather and to release it should the rider fall from the pony.

The Stirrup Irons (also called stirrups) are attached to the stirrup leathers and provide support for a rider’s feet.

The Flap is a leather flap that sits on top of the girth straps and buckles to keep the rider’s legs from rubbing on them.

The Girth Straps hold the buckles which fasten the girth to the saddle and are usually made from either webbing or leather.

The Knee Roll provides padding and grip for the rider’s knee.

The Outer Panels are made of leather and are filled with padding of felt, wool or plastic foam. They are attached to the saddle under the skirt. The padding is to protect the pony’s back and to distribute the rider’s weight evenly.

The Keeper holds the end of the stirrup leather to stop it flapping about.

The Gullet is a groove running from front to back underneath the saddle.

The Skirt is the flap of leather over the stirrup bar.

D-Rings are attached to the saddles to provide places to attach equipment e.g. a martingale.

The Riderless Horse in American Presidents’ Funerals

While having roots in antiquity, the custom of a riderless horse participating in a funeral procession has changed dramatically since the time of an ancient legend of mourners leading a horse to a burial site, where it was slaughtered and eaten as part of a ritual. Horses were occasionally sacrificed so that their souls could accompany their masters into an afterlife, were buried in tombs from time to time for the same purpose, and were dispatched on similar journeys to another world well into the 14th century.

In North America, early Native Americans had great reverence for horses, and while the founders of the United States of America may not have shared that reverence initially, they nonetheless respected the animal’s significant roles in transportation, agriculture, sport and the military. At the end of the 18th century in the United States, with the death of America’s first president, a new role emerged: the riderless horse representing the mount of a fallen leader.

A former officer in the American Revolutionary War, Henry “Light-Horse Harry” Lee eulogized George Washington in December 1799 as being “…first in war, first in peace and first in the hearts of his countrymen…” Twelve days after Washington’s death at Mt. Vernon, a riderless horse took part in an elaborate, simulated funeral ceremony conducted in Philadelphia, the then-capital of the United States, with an empty casket symbolizing the late president. The event was described in The Pennsylvania Gazette:

Immediately preceding the clergy in the funeral procession, two marines wearing black scarves escorted the horse, who carried the general’s “saddle, holsters, and pistols” and boots reversed in the stirrups. The riderless horse was “trimmed with black – the head festooned with elegant black and white feathers – the American Eagle displayed in a rose upon the breast, and in a feather upon the head.”

The empty boots facing backward in the stirrups had two levels of meaning. First, their being empty indicated the individual would ride no more. Secondly, they suggested the deceased was taking one last look back at his family and the troops he commanded. Both of these meanings carry forward to today’s tradition of boots reversed in the stirrups.

In 1850 the funeral of President Zachary Taylor, a former Army general celebrated as “Old Rough and Ready,” took a more personal turn, so to speak. Taylor’s own Army horse, Old Whitey, was walked in the funeral procession while bearing the military saddle worn in combat during the Mexican-American War, when Old Rough and Ready sat astride him as “shots buzzed around his head.” As in the Philadelphia ceremony commemorating George Washington, the general’s boots were turned backward in the stirrups.

A light gray horse, Old Whitey was familiar to many who witnessed the funeral cortege that day in 1850. He had become a popular tourist attraction while grazing on the front lawn of the White House during his master’s sixteen-month presidency, which ended abruptly when Taylor was struck down by an alleged gastrointestinal complication that reportedly stemmed from ingesting cold milk and cherries on an extremely hot day.

Perhaps because the 1865 assassination of Abraham Lincoln was immediately recognized as a profound tragedy in American history, Lincoln’s funeral was orchestrated on a grand scale befitting the people’s adulation. A funeral train carrying his casket traveled nearly 1,700 miles through 180 cities and towns in seven states, stopping occasionally for public viewings and tributes, as it progressed toward its final destination, Springfield, Illinois, where a young Abe had grown to manhood.

This marks the first time we have photographs of the riderless horse participating in the funeral of an American president. Of the many photos of Lincoln’s horse Old Bob, one of the most memorable shows him draped in a black mourning blanket bordered in white, trimmed with alternating black and white tassels, and a black hood topped by an elaborate head-dressing as he stands in front of a building with windows draped and adorned in a similar manner.

Ridden by Lincoln from town to town while the self-educated lawyer campaigned for office, Old Bob was brought out of retirement in a pasture for his master’s final rites. He was led in the funeral procession by the Reverend Henry Brown, an African-American minister who performed occasional handyman tasks for the Lincolns, as they followed the hearse to Lincoln’s resting place.

Curiously, the tradition of the riderless horse in funerals of American presidents was not observed for the next eighty years. It was not until 1945, when Franklin Delano Roosevelt died unexpectedly while in his fourth term as president, that the horse appears once more. As it turned out, the horse seems to have been almost an afterthought in the plans for FDR’s funeral.

Roosevelt’s death stunned Americans to the core, and inasmuch as U.S. government officials were focused on the transition to their new leader in a world at war, it is understandable that the participation of a riderless horse in FDR’s funeral procession may not have received the attention it had in earlier days. This is how the New York Herald Tribune described the matter:

“Directly in back of the caisson (bearing FDR’s flag-draped casket), a Negro soldier led a riderless horse.” The horse was “draped in black, its head covered in a dark cowl, and a saber bouncing gently off the horse’s belly.” The funeral procession was in Hyde Park, New York, where the late president was buried in a garden on the Roosevelt estate. We will assume the saber was attached to a saddle and bounced gently off the horse’s side.

The year 1963 marked another traumatic time for Americans, particularly the family of President John Fitzgerald Kennedy, who was assassinated in Dallas, Texas, on November 23rd. The riderless horse who took part in JFK’s funeral procession would become the most renowned of them all: Black Jack, who would represent the mount of a fallen leader in the processions for Kennedy, Presidents Herbert Hoover (1964) and Lyndon B. Johnson (1973), as well as General Douglas MacArthur (1964), among other prominent Americans.

The protocol for Black Jack in Kennedy’s funeral procession would set the standard for riderless horses from 1963 to the present day. He was tacked with a black modified English riding saddle and black bridle. Black, spurred cavalry boots faced backward in the stirrups, and a scabbard with sword hung from the rear of the saddle’s right side. Positioned beneath the saddle, a heavy saddle cloth, or saddle blanket, was ornamental in design.

Although he was a military horse named in honor of General of the Armies John J. “Black Jack” Pershing, Black Jack was not born into the service. A dark bay Morgan-Quarterhorse cross with a small star on his forehead, he was foaled on a Kansas farm in 1947 and later purchased by the U.S. Army Quartermaster Corps for remount service, the remount referring to a soldier’s need to replace a mount that had been injured or killed in the days of the U.S. Cavalry. The Army then shipped Black Jack to the Fort Reno, Oklahoma, Remount Depot, where he was raised and trained.

He was not a tall horse – 15 hands, weighing 1,050 pounds – but he had a big personality and was spirited. In fact, his rambunctious spirit was a problem for his handlers when he was transferred in 1952 to Fort Myer, the Army post adjacent to the Arlington National Cemetery in Virginia. In his first outing as a riderless horse in a funeral procession to Arlington, he pranced and danced a great deal. Mourners liked his spirited nature, however, and so his unmilitary antics were tolerated. Those antics continued until he was retired in 1973 after participating in several thousand funerals.

When Black Jack passed away in 1976, his remains were cremated and his ashes buried with full military honors. A monument on the parade ground at Fort Myer’s Summerall Field attests to the degree he had been revered. Raven, another dark horse, succeeded Black Jack in his duties as a riderless horse.

Raven made no appearance in the funeral procession of an American president, although he likely participated in more than a thousand funerals of military leaders who were eligible for burial in Arlington National Cemetery. The stately funeral service provided for presidents, who are military commanders-in-chief, is also available to Army and USMC officers having a rank of colonel or higher, and there are many such officers among Arlington’s honored dead.

At this point a mention should be made of President Dwight D. “Ike” Eisenhower, who passed away in March 1969 and was buried in Abilene, Kansas. No horse of record participated in the Kansas funeral ceremonies, but earlier, in Washington, a riderless horse did follow the horse-drawn caisson bearing Eisenhower’s casket from the Washington National Cathedral to the Capitol, where the late president lay in state for public viewing in the Capitol Rotunda.

A video of the procession from the Cathedral to the Capitol shows a riderless horse who is nearly liver chestnut in color with a small star on his forehead, a horse whose prancing and dancing in the procession, and pawing impatiently while standing “at rest,” bear a suspicious resemblance to Black Jack’s behavior. If the fidelity of the color in the video is flawed, and the horse’s coat is indeed nearly black, it could be that BJ, as Black Jack’s grooms and walkers called him, had a connection with the man who was the most popular military commander of World War II and, later, the 34th president of the U.S.

The most recent riderless horse to represent the mount of a deceased American president, and the last on record, followed the caisson bearing the body of Ronald Reagan in 2004. Reagan was later buried in Simi Valley, California, so here again we have something of an Eisenhower situation. The late president’s tan, spurred riding boots were reversed in the stirrups, replacing the black cavalry boots traditionally used. The procession in Washington ended at the Capitol, where a closed casket lay in state for viewing.

The riderless horse in the procession paying tribute to Ronald Reagan was Sergeant York, a dark bay gelding named for the decorated American soldier of World War I, Alvin C. York. Before Sergeant York the horse entered military service, however, he had plied a trade in harness racing for several years under the name Allaboard Jules. A standardbred foaled in 1991, Allaboard Jules became an Army horse with a famous name in 1997.

The military has been referred to many times in this article, which will draw to a close with an explanation for those many references.

In 1948, the Army’s 3rd U.S. Infantry Regiment was assigned the responsibility of organizing and conducting the funeral processions of American presidents laid to rest in Arlington National Cemetery, as well as other Americans eligible for burial with military honors in Arlington. The Old Guard, as the 3rd U.S. Infantry Regiment is known, was formed in 1784, is the oldest active unit in the U.S. Army, and is based at Fort Myer, Virginia, adjacent to the nation’s most hallowed cemetery.

The Old Guard’s Caisson Platoon provided the muscle and polish for the formal and elegant funeral procession honoring JFK in 1963, as well as the processions that followed that point of time in this article. The soldiers in the Caisson Platoon are dedicated to tradition, are respectful of the honored dead, respectful of the forty or more horses they provide care for, respectful in their maintenance of the 1918 caissons that bear the caskets to their final resting places with full military tribute.

The riderless horse is also known as the caparisoned horse, the caparison referring to the ornamental design on the horse’s saddle cloth, or saddle blanket. The solider who leads the riderless horse is called the cap walker, and in the case of the spirited Black Jack, the young cap walker handling him in a procession likely had quite a story to tell his comrades in the Caisson Platoon at the end of day.

Antique Drafting Tables

If you are looking for a large table to work on and you also want it to be an enhancement to your existing furniture in the house, antiques drafting tables are ideal selections. The surface of a drafting table is very big so it makes it very easy and comfortable for the users. For professionals such as architects, artists, designers, you will greatly appreciate the extra space.

There are many different kinds of drafting desks available in the marketplace but if you have decided to get antique drafting tables, you have to ensure that you have ample space in your office or apartment. A drafting table can be very big so you will need to have a lot of room for it. You do not want to in a situation when you are left with no space to move around after putting the table in your office or apartment.

In addition, these antique tables are made of oak so it is very heavy and is not suitable for constant movement. If you do not intend to put it on the first floor and instead need to move it upstairs, you might face some problems because of its big size and heavy weight. Moreover, you must also check and ensure that the floors are able to take the weight of the large table. As such, if you do not have enough space in your apartment or office, or that the floors might be too soft to handle the heavy weigh of the table, you might want to buy a modern drafting table instead.

A modern table is very lighter and some are even a combination of a computer table and a drifting table. However, if you intend to get a modern one, then make sure you do not get one that is top heavy. A top heavy table might flip over and could hurt or even kill someone near or underneath it, especially a young child.

On the other hand, for someone who appreciates the exquisite designs of the antique drafting tables, you will not want to purchase the modern ones. These antiques desks have designs that can fit in with any theme you have in your home. As these antique tables are made of wood, they are very solid and can last you for many decades so you will not have to worry about wear and tear.

A problem you might find when you are looking for an antique drafting table is that you might not be able to find out that is in perfect condition. Since these tables were built decades ago, most of them would have dents and cuts in them. However, as long as you can find one that is still in reasonably good conditions, it will be a worthwhile investment to purchase it.

The best way for you to find one of these antique drafting tables is to carry out a search online for a trustworthy dealer. Ensure that he is someone who has good feedback and preferably, he is someone recommended because such tables can be very expensive and you do not want to waste your hard earned money. Just make sure you do your homework well and you will be rewarded.

Best Affiliate Network

An affiliate network provides a place for both merchants and affiliates to interact in business. There are many such networks that claim to be the best in its kind, but many of them just say that in order to advertise their businesses.

Affiliate marketing is a very simple marketing technique. It promotes a product or a company in exchange for a commission from the company in case a sale or a lead is made due to the marketing efforts of the associate. Online associate marketing is very simple with the merchants giving the affiliates an associate id that is embedded in the html links and on the web pages. If a customer clicks on a link, he or she is directly taken to the merchant website, and if the sale is made or if a lead is created, the affiliate is paid the commission for that transaction. The best affiliate network offers its associates and merchants good deals and prices.

Affiliate marketing does not necessarily take place only on the internet. There are other options for it, other than the internet modes, like mail order business, post cards, etc. There are several options that are available for these. People often keep looking for the best network in order to carry out their affiliate marketing businesses.

If affiliate marketing is done properly, it can be a very good business and a very good source of income for associates. The commission earned by them can be anywhere from a few pennies to thousands of dollars, for just one sale or one lead. There are many professional marketers who develop their affiliate relationships and build their networks with these relationships that they have developed. In order to become the best network, the affiliate network must offer a lot of benefits to the merchants, as well as the affiliates, while making a profit on the business as well.

There are many networks on the internet that fit the bill as the best affiliate network. People often only go for the best and there are so many networks out there, which claim to be the best; different reviews are given for each of these networks, making it difficult to choose which one to join. To be on the safe side, it is a good idea to join more than one affiliate network and see which one works for you the best. Whichever works the best for you is definitely the best affiliate network for you!

Ambient Light Installation

If you are looking for a more budget-friendly alternative by which you can change the appearance of your room, then you may consider giving more thoughts on your ambient lighting. Ambient lighting, also known as general illumination, is a lucrative means of making a boring space to look more detailed and alive. This general lighting is also a great way to soften and change the over-all appearance of the room.

For example, you want to add a romantic mood in your dining area, the proper use and selection of colored lights and dimmers can help achieve this goal. The children’s room, which you may want to make livelier, can be installed with chosen lamps of various shades. You may do your own light installation if on a tight budget or you may also hire professionals for a safer and more efficient ambient light installation.

Coming from every direction, this ambient illumination is and effective way of setting the mood and character in any space. Ambient light may either be supplied by natural luminance or it may also be supplied by artificial sources. The most typical installation of ambient illumination involves placing the fixture on the ceiling to serve as the main source. Additional general illumination sources may be fixed all throughout the room so that balance may be accomplished or some focal areas may be highlighted. Ambient fixtures may be set up on the tables, floors, ceilings and walls.

By properly designing and conceptualizing a system of fixtures and other materials in the room, better ambient illumination may be attained. If you want to optimize the free natural light during daytime, position your mirror opposite your window and next to the wall so that the amount of natural light entering the room will be boosted.

When placing a lamp on the table’s end, for ambient lighting and task lighting as well, ensure that the lamp is big enough to cast the maximum amount of illumination especially if placed beside the sofa or chair that can possibly block the light. If to be used for reading, the lamp shade’s bottom should be parallel with the ear while on your reading position. The base should also be heavy so the lamp would not tip over; must not be wider in comparison with the end table top. When using a floor lamp, select a lamp that is tall enough to cast light throughout the room so that the room’s upper half is directed with light.

For a very large room, tall floor lamps must be placed at the opposite ends of the area. Common shades of lamp include cylindrical and angle shades. These are open at the bottom so that light may be projected downwards and outward. There are dark colored shades that can be selected if you want to reduce the glare produced by the bulb yet lighter colored shades are better in reflecting light. There are also round shades or ball shades that are made from paper. These shades are cheap, fit easily and cover the entire bulb to distribute glare-less bulb.