Types of Dental Bridges: Pros and Cons

Whether you have gaps between your teeth or you have lost a tooth due to decay, infection or accident, you can replace missing or gapped teeth with natural looking prosthetic device, called dental bridges.

Dental bridges are the latest and best solution for replacing teeth that are missing or that need to be removed. Fused between two porcelain crowns, a dental bridge not only helps you obtain a perfect and complete smile but also restores your ability to eat and look normal.

Gone are the days when people with the poor dental structure and unattractive smile did not have any solutions and they have to live with stained, chipped, misaligned or spaced teeth. Today, a wide variety of aesthetic dental treatments are available that can correct everything from minor flaws in the smile to tooth discoloration, missing or cracked teeth, and unevenly spaced teeth.

From implants, porcelain veneers and bridges to tooth-colored fillings, patients can choose from a plethora of dental solutions to restore the vitality of their smile and overall oral health.

What are Dental Bridges?

Dental Bridges are referred to as a false tooth or teeth (pontic) to create a beautiful, healthy and a more aesthetically pleasing smile. These prosthetics are used in cosmetic dentistry to “bridge” the gaps where a tooth or teeth are missing or removed.

Made of two caps, known as crowns, and an artificial tooth, a dental bridge is permanently fixed to abutment teeth that are on each side of the false tooth.

Over the last few years, this cosmetic dental appliance has undergone a transformation, thanks to cutting-edge dental technology, including the computerized x-rays and the revolutionary 3D imagery & CAD-CAM system.

Cosmetic dental experts now are able to quickly create accurate dental restorations, including abutments, full crowns, dental bars, implant bridges and inlays / onlays, that are stronger and has a more natural and pleasant appearance.

Types

There are three main types of dental bridges:

Traditional bridges: Made of porcelain or porcelain fused to metal, these prosthetics are fixed and unlike removable partial dentures you cannot take them out of your mouth.

Cantilever bridges: This form of bridges is used when only one abutment tooth surrounds the open space.

Maryland bonded bridges: Also called a resin-bonded bridge, this bridge is primarily used for your front teeth. It is a good choice when the abutment teeth are healthy, strong and don’t have large fillings.

Advantages

With latest advancements in dental technology and cosmetic dentistry, installing a bridge is a simple procedure now.

It is a time-saving procedure, requiring only two visits to the dentist.

Bridges are natural in appearance.

They help maintain your facial tone and prevent facial musculature changes.

If you maintain good oral hygiene, bridges can reduce your risk of gum disease and prevent the tooth from shifting, tilting, or drifting into the empty space.

They give you a healthy, beautiful, well-aligned smile as well as help correct bite issues and even improve your ability to speak properly.

Your chewing efficiency is increased as the forces in your bite are equally distributed after installation of bridges.

Bridges are less invasive and less expensive when compared to dental implants or any other restorative dental procedure.

Your fixed bridge should last as many as ten years or more, albeit it requires commitment to serious oral hygiene.

Disadvantages

It is likely that your teeth become sensitive to extreme temperatures, hot and cold, for a few weeks after the treatment.

Acidic food may lead to build up of bacteria on your teeth and gums can become infected in the absence of proper oral hygiene.

Smoking may cause complications, as it harbors bacterial growth.

Poor oral hygiene can aggravate failure of dental bridges.

Cemented bridge may become loose or collapse.

A dental bridge requires removal of natural tooth structure from the two anchor teeth.

Free Work at Home Assembly Jobs – How to Avoid the Scams

You probably think that all work at home assembly jobs are scams – I did, too, but I’ve discovered there are some genuine opportunities out there. The trick is to search for them, rather than to respond to the ones that fill up your inbox every day. The latter will likely request a fee up front – never pay as there is no need.

So what are these free jobs? Well, assembly jobs are those where an organization has something that needs putting together, and chooses to outsource the assembly of the product rather than pay full time staff to do so. This saves them money, yet makes it for you!

It could be that they need CD cases assembling, or craft items putting together, or it could be they need gift items finishing or novelty items making up, but whatever it is you will be given full and clear instructions, and an agreement on how much you will be paid and for how many completions.

Among the most common of assembly jobs are those that involve stuffing envelopes; companies that use mail drops often use home workers to put them together, and it can involve inserting a number of items into one envelope over and over again.

Assembly work is repetitive by nature, but it is also easy. Stuffing envelopes is not rocket science, and can be done while you watch the television or listen to music. Work at home assembly jobs are a great way of earning some extra money in your spare time – but remember, don’t pay up front!

***

Take The Indoors Outside With Flat Screen TV Mount Options

As weatherproof televisions and outdoor flat screen mounts become more affordable, larger numbers of homeowners and business owners are taking advantage of the price breaks to install new units in outdoor spaces. Doing so not only adds an entertainment element to patios and beer gardens, but also allows places like malls and amusement parks to display maps, wait times, and other important information to customers.

Mounting a television outdoors requires close attention because of the additional structural and safety factors involved. In some cases, standard TV mounts will suffice, but there are several situations in which special flat screen mounts or enclosures are called for. Here are a few of the more popular mounting options for outdoor areas.

Weatherproof enclosures

Weatherproof enclosures are the easiest way to prep your television for outdoor use. These boxes are used in conjunction with regular mounts to completely surround your television and protect it from rain, dust, critters, and other harmful elements. Some enclosures even come with a temperature control unit to help prevent damage caused by extreme hot or cold.

Single and multi-screen poles

In some locations, outdoor television viewing is a seasonal activity limited to the mild weather of the spring and summer months. As such, it wouldn’t make much sense to use permanent TV mounts that would essentially render your set useless for most of the year, especially when poles present a much better alternative. A single pole mount is used for one television, while multi-screen poles are meant to accommodate two or more units, which is great for beer gardens and other venues where people will be watching from multiple angles.

Standard wall brackets

If you plan to mount your television in a covered area that offers natural protection against the elements, then standard wall brackets can do the job. Wall brackets work with fixed or tilting flat screen mounts to attach your television to a solid surface. With the right hardware, you can even install your television on tough materials such as stonework and brick.

Ceiling flat screen TV mounts

Ceiling flat screen TV mounts are a good option for those outdoor spaces that feature a sturdy covering or roof-like structure. This type of mount allows you to suspend your television from the ceiling when wall space is not available. Ceiling flat screen mounts are great for covered patios, beer garden tents, resort cabanas, and even gazebos.

Taking the indoors outside is easier than ever. With the right flat screen TV mounts or enclosures, you can install your television anywhere-provided there’s access to an electrical outlet, of course. All you have to do now is figure out which mounting solution is best for your setup so you can begin the process of transforming your outdoor room to a full-service entertainment or information center.

Hammer Toes – Treatments, Causes & Simple Home Solutions

Other than surgery, the only effective hammer toes treatment is to find the cause and address it. In some cases, the deformity is too severe to be corrected without surgery. So, at the first sign of redness on the top of your toe, in the area around the joint, consult a podiatrist. Here’s a look at what he or she may suggest.

Toe Exercises

Weak tendons, ligaments or muscles contribute to the problem. Exercises can be used to strengthen all of them.

Stretching out the tendons in the top of the foot reduces the amount of “pull” they put on the toes. Tight tendons are among the many causes and contributing factors.

The tendons are like springs, but sometimes the spring-action is tighter than it should be. This causes the toe to pull in towards the ball of the foot.

Exercises that may improve the spring-action include picking up small items with your toes and crumpling newspaper by pulling them towards the ball of the feet. As the tendons relax, the toe may start to straighten out.

Arch Support

Arch supports are an effective hammer toes treatment, when flat feet are causing the problem. Some people are born with little or no arch. When they are young, it doesn’t always cause pain or other problems. But, as they get older, they often start to notice pain in the ball of the foot.

When a person’s feet are flat, there is an imbalance in the amount of tension placed on the upper and lower tendons. Over a period of many years, the upper tendon can eventually pull the toe inward, causing the joint to move upward.

A special shoe for people with high arches is another hammer toes treatment. If you don’t know the condition of your arch, you can stand in wet sand and note whether the arch looks normal, too flat or too high.

Custom Orthotics

Custom orthotics can be ordered by your doctor or you can order them online. A mold of the bottom of the foot is taken and insoles are crafted that exactly match the shape of the bottom of your foot.

This is a solution when suppination or pronation is a problem. If that is the case, the heel leans either outward or inward. Either one can be a problem.

Although a custom orthotic may be an effective hammer toes treatment, they must be worn with well-designed, comfortable shoes. One more option is available.

Hammertoe Straighteners

A hammertoe straightener is a special pad and strap device that pulls the toe straight. It is small enough to be worn with most kinds of shoes.

A straightener reduces the friction on the top of the toe and takes the pressure off of the ball of the foot. So, pain in both areas is reduced or completely relieved.

Eventually, a straightener combined with exercise may allow the toe to become straight again. So, surgery can be avoided.

An in-home hammer toes treatment may be effective, if you are consistent. But, it is important to consult your physician, as it could be a symptom of another more serious ailment.

Mosaic Technique of Double Direct Method on Mesh

The Double Direct Method on Mesh is an advanced technique of laying mosaic tiles. It allows the artist more freedom in design and installation. It is just like doing the direct method but your tiles are adhered to fiberglass mesh instead of your substrate.

Whether you call it the double direct method or the mesh method, you will love this new technique. Once the tiling is finished, you can install it anywhere, whether it is on a tabletop, kitchen backsplash, or an outside mural. The versatility is tremendous.

You will need fiberglass mesh before you begin. It is very important to use fiberglass mesh since it takes much longer for it to deteriorate than other mesh. This is sold in square yard sections but you can find it in a continuous roll if needed. Be sure to get either the 4.3 ounce or the 6 ounce. This is simply the weight of the mesh. The 4.3 ounce is good for most glass mosaics. The 6 ounce is best used for heavier tesserae such as marble.

You will also need to have your design drawn up in the actual finished size. You can take your small version to most copy stores and they can blow it up to large scale for you. Remember that you will lose some of your detail when you increase the size.

To get started, you will need a large flat area to lay the mosaic. You might want to use a piece of plywood or even a doubled up cardboard box. It just needs to be sturdy enough to hold your mosaic if you need to move it from the table in which you are working.

Now you are going to layer and tape the following in this order. Lay your design on the surface that you chose. Cover your design with plastic wrap. Next cover the plastic wrap with fiberglass mesh. Make sure that all of this is secured to the flat surface. If this moves during your mosaic, then your design will be shifted.

Using full strength Weldbond, start adhering the tiles to your design. You don’t want to use too much glue so lightly dab the glue on the back of each piece. Follow your design that is under the mesh until you have completely covered it. Beware of cutting tiles over the mesh. You will end up with shards stuck in the grooves of the mesh and will have tiles pop off later because of poor adhesion.

Once you have finished laying the tiles, allow the piece to set overnight. Carefully flip the entire piece over and remove the plastic wrap. The glue will still be wet at this point but your tiles should stay in place. Let the glue finish drying. Trim the excess mesh from around the mosaic. If your mosaic is very large then you will need to cut it into workable pieces. If it is small enough to handle easily then you are ready to install.

Mix your thin set mortar using the latex additive according to package directions. Spread a thin layer onto your surface and trowel through until it is half the thickness of the tiles. Position the mosaic onto the thin set. Once you are sure that you have it where you want it, take a two by four and press down all of the tiles. If you have any thin set that squishes up between the tiles, use a toothpick to clean out immediately.

Allow your installed mosaic to set up overnight. Grout your finished mosaic the same way you would grout any other mosaic.

Tuckpointing

Tuck pointing is a growing industry. It has been around for thousands of years, but has become much more popular in the past ten years. This has spawned a number of innovations.

Originally, brick/stone masons would hammer and chisel out the mortar as needed. Then rinse away their dust allowing the new mortar to stick. After preparing the cracks for re-pointing, these masons would mix up new mortar to replace the old cracked mortar. At this point, they used a hopper or a trowel to hold their mortar, and a pointing trowel or a tuck-pointing trowel to push the mortar into the chiseled mortar-joint. After allowing the mortar to dry to a proper texture, these mortar-joints are tooled and brushed clean.

In today’s market, tuck pointing is considerably different. We no longer have to hammer and chisel the mortar-joints to open the cracks up for repair. Most companies use an angle grinder fitted with a diamond-carbide blade prepared for the purpose of removal of the mortar. This innovation allows us to cut the mortar-joints out deeper and faster than had typically been done prior. This depth is about ½ to ¾ of an inch deep, and allows for a better bond into the wall. This still requires the dust to be rinsed away to improve the ability to stick or bond in. In recent years, the new mortars are blended to match the original mortar of the masonry work. Note that not all companies are offering “Custom Color Matched Mortars”. (For companies that offer the “Custom Color Matched Mortar System” copy and paste this in your search bar). We also no longer need to use the pointing-trowel or tuck pointer to install the new mortar. This industry has adopted a tool used for grouting tile. It is called a grout bag, and it allows for more speed and accuracy when injecting the new mortars/grout into the mortar-joints. The mortar is still allowed to dry to a desired texture, then tooled and brushed clean.

Each of these new tools and processes has made this service faster, stronger, and more desirable.

There are books and other reports available at http://alamomasonryrepair.com/products.htm which will help you to locate quality contractors in your area or guide you through the process of doing the project yourself.

Gothic Conventions in Ann Radcliffe’s The Mysteries of Udolpho and Matthew Lewis’s The Monk

Gothic fiction was a very popular genre in the late eighteenth century. Generally considered to have been inaugurated with the publication of Horace Walpole’s The Castle of Otranto in 1764, the genre reached its peak of popularity in the 1790s and early 1800s. Two of the most famous Gothic novels, Ann Radcliffe’s The Mysteries of Udolpho, first published in 1794, and Matthew Lewis’s 1796 novel The Monk were both bestsellers in their day. Lewis’s novel also attracted controversy due to its lurid content. These novels helped establish a range of narrative conventions which occur with almost predictable regularity in other Gothic literature.

The literary theorist Eve Kosofsky Sedgwick identified many of these eighteenth century Gothic conventions. She observed that the novels were usually set in the past, often in a Catholic European country, such as Italy or Spain, and the bulk of their narratives took place in a vast and crumbling edifice or religious institution. These buildings would frequently be situated in wild and rugged landscapes. The Mysteries of Udolpho is set in sixteenth century Italy while The Monk is set in medieval Spain. Much of the narrative of Radcliffe’s novel is played out in Castle Udolpho, a sprawling medieval fortress, whilst Lewis’s tale takes place in the monastery of the Capuchins.

The principal characters in Gothic novels were generally a young female protagonist, her lover, and a villainous older man. This triad of characters is apparent in The Mysteries of Udolpho with the heroine of Emily St Aubert; her lover, the dashing young Valancourt; and Count Montoni – a sinister nobleman bent on acquiring the estate of Emily’s late father, St. Aubert, and prepared to go to any lengths to achieve this goal. In The Monk however, the arrangement of character roles is decidedly different from Sedgwick’s observations. The protagonist is a male character, Ambrosio, a monk who functions as a sort of anti-hero as he is tempted away from his monastic vows. Ambrosio’s temptation is effected by Matilda, a woman disguised as a monk who later transpires to be an instrument of Satan. Matilda assists Ambrosio in seducing the innocent Antonia, a young woman who he later rapes and kills.

The theme of incarceration figures prominently in The Mysteries of Udolpho and The Monk, and is another Gothic convention noted by Sedgwick. The orphaned Emily and her aunt, Madame Cheron, are essentially trapped in the remote Castle Udolpho, which is located high up in the Apennines, by the rapacious Montoni. In Lewis’s novel, the nun Agnes is imprisoned in a dungeon under her convent.

Regarding narrative form, Sedgwick describes the typical Gothic novel as being discontinuous and involuted, in that it frequently digresses from the central story. This is particularly apparent in The Monk, where a series of vignettes are interspersed throughout the main narrative. These include the stories of the ‘Bleeding Nun’ and the ‘Wandering Jew’.

The revelation of obscure family ties in the denouements of many Gothic novels is another of Sedgwick’s observations regarding eighteenth century Gothic fiction. Both The Mysteries of Udolpho and The Monk feature significant revelations concerning their principal characters. In Radcliffe’s story Emily learns that the Marchioness de Villeroi was not the lover of St. Aubert, as she had long supposed, but in fact his sister. In The Monk meanwhile it is revealed to Ambrosio that he has unwittingly committed incest as it transpires that the murdered Antonia was also his sister.

Painting Estimates – Three Questions You Must Ask Before Hiring a Painter

Getting a painting estimate for your project might seem like a pretty straight forward task; call a couple of painting contractors, have them all come out and give you a quote, choose one, right? Well, in theory that’s how it would work, but there’s a few critical things you need to know before you just pick the one your dog didn’t bark at or the one who actually smiled when he stopped by.

Hiring a professional painter may seem like you’re just hiring someone to do something you don’t want to do. In other words, many people don’t realize just how much of a skill and profession it really is and don’t realize there are many tricks of the trade and hard won knowledge that can go a long way toward a beautiful paint job in the end as opposed to a nightmare.

There are many, many things to consider before hiring someone, but there are three questions you really must ask when you get your painting estimates.

  1. Are you licensed and insured? This may seem like common sense, but sometimes the lure of a lower price can hook people into accepting “under the table” work. Having the proper licensing and insurance is part of doing business the right way and it is part of the cost of doing business. Not only is it the mark of a professional, but it also protects you from the possibility of being sued if someone were to get injured on your property. This will be reflected in a slightly higher cost than those who aren’t, but you can rest assured that you are dealing with someone who is devoted to his or her trade. Don’t overlook this important element.
  2. Does your work conform to the PDCA standards? The PDCA is the Painting and Decorating Contractors of America, the trade association for painters. They outline specific standards for completed work and a quality painter will not only adhere to these standards, he will be involved with the local chapter of the PDCA. This shows his devotion to quality work and dedication to continued education in the field and staying on top of trends and products that could drastically improve the outcome of your project.
  3. Do you protect all surfaces? Again, this may seem obvious but a lot of homeowners come home after the painters have left only to find tiny little specks of paint on the hardwood floors or the granite countertops. It may not even be something you notice right away, but looking closely will reveal the splatters and specks that tell you the surfaces of your home weren’t protected while they were painting. Make sure they use drop cloths, plastic or some sort of protection for your valuables that don’t need to be painted.

Getting good answers to these questions will get you started and will give you a good idea that you are dealing with someone who is trustworthy and will do a quality job. Of course, there are other factors that come in to play and using some common sense will help you a great deal.

Remember that painting is a skill and there is so much more to it that brushing or rolling on some paint and calling it a day. A good painter will come out and talk to you about your needs, the use of the space to be painted and about different products that will be appropriate for your project. This will have a very positive impact on your painting estimate and your finished project.

Crystal Chandeliers And Your Bathroom – A Perfect Fit?

A bathroom is an important part of the house; it’s a room that can have different functions depending on the cultural context.

In the most standard sense, the word bathroom means “a room with a bath”. Since the traditional bathtubs have partly made way for modern showers, including steam showers, the more general definition is “a room where one bathes”.

In a standard bathroom, there can be just a shower, just a bathtub or both; and often both plumbing fixtures are combined in the bathtub. The room may also contain a sink, often called a “wash basin”, “hand basin” or “lavatory”, and often a toilet fixture.

Bathrooms Are One Of The Easiest Parts Of The House To Decorate

Bathrooms can be one of the easiest rooms in your entire house to decorate, and yet they are sometimes overlooked. Why not make sure that your bathroom is decorated as thoughtfully as the rest of your house? Are you quite hard-pressed in finding the excellent idea for decorating your bathroom? Well, check out some of these ideas.

The right lighting can also make a large improvement on your bathroom. Lighting may not seem like a bathroom decoration, but the right light fixture cannot only add to the style of your room, but it can also make all of your other special details in your bathroom truly stand out. The right lighting can also make it much easier for you to get ready in the morning.

Installing A Crystal Chandelier Would Depend On A Bathroom’s Size

The most basic rule in choosing the appropriate size of the chandelier is to measure and imagine the chandelier’s placement on the desired location. Whatever you may feel that would work the best with your budget and taste, it will definitely work for you.

Once you have established the room’s measurements, you can now shop for the perfect chandelier of your choice of crystal. Since most crystal chandeliers are designed for large halls, living and dining rooms, the best lighting fixture for bathrooms would be wall sconces, 1 or 2, 3 or 5-light bathroom wall lights, that have varied classic designs which are comparable to a crystal chandeliers elegant features.

How To Brighten Up A Bathroom

If your home’s bathroom is too dark, there are several options. If you have a 3-light fixture, would changing to a 5- or 7-light fixture give the light you need? Check on the options. Second, select a higher watt bulb if the fixture can accommodate it, or you could also add additional light fixtures or recessed lighting.

However, if there’s just no solution with the bathroom lighting fixture you have, replace it with one that allows for more light. This is a good opportunity to choose one that enhances your decorating theme and fits the style of your bathroom. You might get a fresh look and more light by simply replacing the glass globes from frosted to clear.

Lighting and mirrors are two things that you may want to consider spending for for your bathroom. Less expensive bathroom decorating ideas include simply getting matching paint, shower curtain, bath mats and bath accessories. It all would depend on the resources and options available to you. Have fun trying out the different lighting options.

Crystal Chandeliers – http://goldenageusa.com

Ideas For Meaningful Baptism Giveaways

While the godparents, members of your family and your friends are busy looking for the most suitable christening gifts, you are in serious preparation for a wonderful event for your child. The baby’s entrance into the Christian world is indeed a very important sacrament that is worthy of celebration.

To be caught in so many choices and tasks for the baptism, you need to set aside time for the catering or food preparation, church arrangements and choosing godparents. But of course, you want everyone to have a meaningful and long-lasting understanding of the event. This is why you need to plan ahead for the best christening favors to give the godparents and other guests to the holy celebration.

This article offers great ideas for baptism tokens. Read on and know the five elements to choosing the most meaningful items for the event:

· Spiritual objects should be firstly considered as baptism is all about your child’s faith and yours. If godparents or family asks for advice what christening gifts you prefer, you could point this out as well. As for the favors, you could opt for mementos such as a small cross for hanging or to be placed on a living room shelf, a Bible engraved with the baby’s name and the baptism date and venue, figurines of saints or angels, and even boxed rosary beads.

· Apart from being sacred, you could also opt for favors that would be of great use to the godparents or guests. They could be angel or lamb paperweights, pen holders or key chains or candle holders. Just don’t forget to personalize the items and include a “thank you” and the baby’s name.

· If you could find something really unique, the better. There are many online stores that sell baptism favors, christening gifts and invitations. From these websites you might get even better ideas on how to customize your giveaways, or just buy from them and improve the items creatively at home. Surf a little more and you’ll learn dozens of ways to make simple gifts become truly unique and meaningful for the guests.

· You could also find items in your local stores like porcelain angels, spiritual reading materials or picture frames. If so, buy enough for the guests and then have it personalized at home. Have the baptismal details engraved or printed in the figurines, or write dedications on the books, or put the baby’s picture in frames along with “thanks”. It will be greatly appreciated by the godparents and the guests.

Scrap expensive gifts and dig deeper for affordable ones. Of course, don’t turn down the godparents’ christening gifts of silver, gold or a hefty college fund. But as for your favors, go for budget-friendly objects that would remind the keepers of the memorable event, as well as the roles they play in the child’s growth.

Did John the Baptist Start the Baptist Church?

I grew up in the Southern Baptist Church and was always led to believe that John the Baptist founded the Baptist Church. Well, it made sense: John was a “Baptist;” we were “Baptists.” So John must have started the Baptist Church, right? Yes, optimistic thinking at its best. Perception is, as they say, reality. Sometimes our perception and Truth are in opposition. And, sometimes, we find out the hard way.

Reading the Bible in its entirety, rather than pulling out a convenient verse here and there, produces the Creator’s intended effect – illumination of Truth.

At the age of 21 I began to read the Bible. Not the common casual perusal through a few Psalms or Proverbs, but a deliberate, systematic study of the 66 books that make up the Bible. Reading the Bible caused me to evaluate the things we Baptists believed and practiced.

After a careful study, I realized that there were a host of practices that we Baptists advocated that didn’t align with the Bible. But one Baptist doctrine stood out above all others – that John the Baptist founded the Baptist Church.

Did John the Baptist start the Baptist Church? Do you want to find it for yourself, or would you like to me share what I found? If you’re reading this sentence, I can assume that you want me to share what I found. Alright, here is knowledge from the Word of God. I hope you will verify it for yourself.

We find King Herod, in the 14th chapter of the gospel of Matthew, spending his birthday at his winter palace. He’d been able to seize and imprison John at his palace. Why did Herod want John in shackles? Because John had said that Herod shouldn’t be sleeping with his sister-in-law, Herodias; therefore, John was incarcerated for his incendiary statement. Actually, Herod wanted to execute John, but feared the reaction of the crowds because the populous believed John to be a prophet of God.

Then, during the celebration of Herod’s birthday, Herodias’ daughter enticed Herod by dancing erotically before him. Evidently Herod was mesmerized by her seductive talents and promised to give her anything she wanted. She’d already been coached by her mother on what to request. “Give me John the Baptist’s head on a platter!” demanded Herodias’ daughter. Herod was now between a rock and the proverbial hard-spot. He didn’t want to incite the crowds, but he also had to demonstrate that he was a man of his word. Ultimately he chose to please Herodias’ daughter. Herod had John decapitated.

Why is this historical account of John’s death important? Because it uncovers the answer to the question, “Did John the Baptist start the Baptist Church?” How does it uncover the answer? John’s death at the hand of Herod was before the Lord and Savior Jesus Christ made the first prophecy that any church would be built. Jesus said that He would build a church – not John. Jesus said that it would be His church – not John’s. John the Baptist founded no church. His name “John the Baptist” was simply a descriptive term of his mission and actions. John was a baptizer of men unto the baptism of repentance.

In the 16th chapter of the gospel of Matthew we find Jesus questioning His disciples. “Who are the crowds saying that I am?” His disciples responded, “Some are saying that you are John the Baptist. Some are saying that you are a prophet, such as Elias or Jeremiah.” But Jesus wanted to know what His own disciples thought. “But who do you think I am?” Jesus questioned. Peter responded and said, “You are the Christ (the Messiah; Savior), the Son of the living God!” Jesus exclaimed that Peter was blessed because his knowledge was given by God and not by flesh. Then Jesus makes an incredible prophecy to Peter and to the rest of His disciples, “You are Peter, and upon this rock (the rock of belief that Jesus was the Son of God, or what we would call the confession of faith in Christ) I will build my church.”

It was Jesus, not John, who stated that He would build a church. We find that the Lord’s prophecy came true in the last part of Acts chapter 2. That section of Scripture reveals that all who were saved were added to the Lord’s church by God. God adds the saved to the Lord’s church. There was no earthly council, no associations, and no conventions that voted on potential church member candidates.

Furthermore, Christ’s church was a “blood-bought” institution, as stated in the 28th chapter of the book of Acts. It was to be an essential, divine, blood-bought institution that the saved of God would be added to by God.

Consider this truth: John didn’t prophecy that he would build any church. John didn’t give his blood for a church. John was simply the fore-runner for the Christ.

History records that the Baptist Church was founded by a man named John Smyth, an Anglican priest ordained by the Church of England in 1594. Smyth became a “Separatist,” and formed the first “Baptist” church in Holland somewhere between 1607 and 1609 – some 1570 years after Christ established His church. Smyth “re-baptized” himself by pouring water over his head. Then he baptized (poured) his followers. 1609 is the unofficial beginning of the Baptist Church.

Prior to his death, Smyth abandoned his Baptist views and began trying to proselytize his followers into the teachings Menno Simons, and the Mennonite Church.

Today’s Baptist Church members are a group of good, sincere, moral, and zealous people. However, they belong to a man-made organization. They belong to a church that wasn’t bought with Christ’s blood, hood-winked in believing that John the Baptist founded their organization. How is this possible? Baptist people have not taken the time to investigate their own heritage. They haven’t taken the time to diligently study the Scriptures of God. They “assume” that what they’ve been told is the truth.

Why would so many good people align themselves with an organization that was clearly founded by a man, instead of simply obeying the instructions of Peter found in the second chapter of Acts and being added to the church of Jesus Christ by God Himself? The answer is as plain as the nose on your face. They just don’t know. They are ignorant of these biblical and historical facts.

Every Baptist need to know that Jesus Christ founded His church and gave His blood for it. Paul told the church at Ephesus that Christ loved the church and gave Himself for it. Paul also said that Christ is the Head of His church, and the Savior of His body, the church.

So we boil it down to this: do you want to be a member of the church that Jesus Christ established, or do you want to be a member of a church founded by John Smyth? My choice is Jesus. Give me the opportunity to obey the instructions for salvation found in Acts 2, and God will add me to the church of Christ, Acts 2.

The Popularity of the Limited Facelift (Jowl Lift)

Due to television and internet advertising, I get a lot of questions from my exiting patients as well as new potential patients about the ‘Lifestyle Lift’. This one-hour ‘method’ shows some fairly significant before and after results with improvement in the jowl and neck areas. Many people as they age would understandably like to see these improvements.

First and foremost, the ‘Lifestyle Lift’ is a surgical procedure. That is not made obvious in any of the advertising. Only surgery with cutting and lifting skin can create those results. These are not results that can come from a bottle, laser, or a suture or threadlift. Regardless of the method of anesthesia used (local, sedation, or general) to perform it, this is surgery. Secondly, this procedure is nothing more than a version of a facelift known as a limited facelift. (don’t let the term facelift scare you, a facelift only changes the neck and jowl area) Limited facelifts are known by a lot of different names with the Lifestyle Lift being just one of them. It is a scaled down version of a full facelift that can have a powerful effect on the jowl area primarily with some improvement in the neck as well. Thirdly, it is a procedure that has some recovery with swelling and some bruising after surgery. While the recovery is fairly short (a week), it is not possible to have a surgical procedure and have no recovery. While the recovery is mainly one of how the face looks, there is some short sequelae of having been operated on.

Limited facelifts are very popular today and make up about half of the facelifts that I currently do. They are popular because they offer real visible benefits without an extensive operation. In essence, they do fit some patient’s ‘lifestyles’, hence the brand name from the Lifestyle Lift company. This operation, however, is not unique to this company and the franchise operators who perform it.

The limited facelift is popular for two reasons. Younger patients today want to treat the earlier signs of jowl and neck changes rather than waiting until they are much worse. As a result, their facial problem is less severe and they do not need an extended or full facelift operation. The limited facelift can be combined with many other smaller procedures as well (e.g., Botox, injectable fillers, laser resurfacing, eyelid tucks, neck and jowl liposuction) to create an even better overall result without significantly extending the recovery. Older patients (who really need a bigger operation but do not want it) can partake of a simpler and less scary operation that provides some degree of visible improvement. This usually fits their financial situation and allows them to have facial surgery that they can afford.

Elevator Speech Template Examples – Basic 30 Second Introduction Scripts

An elevator speech remains one of the most important networking and marketing tools you have at your very disposal. Of course every business is different and it is all very well talking to people at networking events and so on, but how do you make sure you grab their attention? Is there a template that can be followed that allows you to come up with a 30 second introduction for YOUR business?

Actually there is a format that has proven success and can be applied to pretty much any business that aspires to have clients! Hopefully that is every business that wants to stay solvent!

There are some pre-requisites to achieving success with this approach and the main one is developing a clear idea of your ideal client and the issues with which they are struggling. Closely related is how you help them – what does your company do that solves the chosen challenges of your ideal client base.

Armed with that information, the more detail you have the better, here is the template to follow for any business:

Part 1: Who You are

Hi, My name is… from (company name)

That is all you need. Obviously if you are in a conversation already and someone asks you what you do you don’t need to reintroduce yourself! You can also vary this along the lines of: “I’m Jerry and my company is…”

Most importantly, resist the temptation to expand this into a long explanation of where your office is located, when the business was founded, how many employees you have and so on. Shorter is better

Part 2: Who you help

We help (this target audience)…

Again, as short and targeted as possible. Avoid the temptation here to think everyone is your IDEAL client. Messages such as: “We work with anyone who owns a car” is too broad. There is leeway here to change the words as well of course. Pick a variation with which you are comfortable – we work with, we help, I am focused on etc.

Part 3: What problem do you address

Who have (this problem, issue or challenge)

You don’t need to elaborate for minutes on end. Define the main problem you solve – not the solution at this stage.

Part 4: What they get

So they get (this particular solution)

The best way to couch these parts is using language that speaks to the emotions of your ideal client – frustration, anger, annoyance, fear, worry and so on.

For example:

Hi, I’m Jerry from Acme Insurance. We help home owners in Leawood who are worried they don’t have adequate coverage or even that they are over-covered. With us they get over the frustration of not knowing and get the peace of mind they want by knowing they are insured appropriately.

What Are Considered the Best Pellet Stoves?

Pellet stoves are abundant on today’s market and it is not difficult to find one that will fit your own particular needs. However, the best stoves are sometimes hard to locate because you really don’t know what you’re looking for. You want a stove that will give you the heat you need to stay warm and comfortable and at an affordable price. As with any product, the quality and efficiency varies so it is important that you do some basic research before purchasing your stove.

When looking at the various stoves on the market, make sure that you can conveniently get any replacement parts that you might need in the future. Buy from a reputable dealer who stands behind his products and offers a good warranty. Decide what kind of pellet stove you want – wood or corn pellets – and then ask around about the differences between the two. The efficiency of each type should be thoroughly evaluated according to where you live.

There are many excellent pellet stove manufacturers and some of the most reputable are Breckwell, Englander, Harman and Lennox. Of course, there are more that you can find by asking around or looking at websites. The best manufacturers sell both top and bottom feed pellet models. They stand by their products always and make sure that they are built to be as maintenance free as possible.

Choosing a manufacturer that has been in the business for many years is a good idea. It is very likely that the stoves it produces are still working well. Reputation is the key word when buying anything, especially something as important as a home heating device. You want a stove that is easy to install, easy to maintain, easy to use and even easier on your pocketbook! The best pellet stoves are out there just waiting for you to look at. Check out some of the better known manufacturers today and you very likely will find a stove that will more than meet your every need.

The History of Rice Cookers

Rice has been a staple food of mankind across thousands of civilizations for almost as long as recorded history. As such, the cooking of rice dates back almost as far, which in essence requires the same basic principle steps today as it ever has. In short, the rice itself, hot water or steam and something in which to cook it.

Of course, never content with doing things the old fashioned way, manufacturers have moved away from tradition methods of cooking rice in favor of modern alternatives which offer both convenience and quality of end product. However, that state of the art rice cooker which takes pride of place in a huge number of modern kitchens may not in fact be as modern as many would think.

Using electrical heating to cook rice is fairly old concept, dating back to the first half of the 20th century. In fact, it is known that as far back as 1937, the Japanese Imperial Army created something of a primitive electric rice cooker in the form of a wooden box with a pair of electrodes attached at opposite ends. In order to cook the rice, the wooden box would be filled with water and washed rice, to which an electrical current was subsequently applied. The electricity would then heat the water to boiling point and cook the rice exactly as would be done conventionally. The first japanese rice cooker.

Upon completion, the electrodes were removed and ambient heat of the box coupled with the evaporation of most of the water provided a wonderfully effective and natural keep-warm facility for the cooked rice, which is one of the most essential features found on the modern equivalent. The main downsides of the initial invention were that the quantities of water and rice could not be adjusted, and that the presence of a live electric current posed the very real danger of electrocution to those operating the cooker.

1945 saw the Japanese Mitsubishi Corporation become the very first manufacturer to produce a electric commercial rice cooker suitable for general use with a moderate level of safety. The engineering principals were fairly simple, featuring no specific components for the regulation of the cooking process. As such, the aluminum container with a heated coil inside required constant attention throughout the cooking process.

During the early stages of their development, rice cookers were incredibly basic appliances whose purpose was to simply heat up water and rice to a desired temperature and remove power to the heater when said temperature was met. However, the temperature readings were heavily influenced by the environment in which they were placed, therefore seasonal changes and general differences in ambient temperature could cause inaccurate temperature reading and therefore result in improperly cooked rice. The idea was almost foolproof, though inherently flawed.

December 1956 saw the world’s first commercially successful rice cooker hit the shelves courtesy of the Toshiba Corporation. The device used a twin-pot cooking process which featured advanced thermostats and safety devices which ensured the cooker was automatically turned off before rice could spoil or burn. As such, it wasn’t long before Toshiba was producing and selling upwards of 200,000 such units every month for the Japanese market alone. Within the space of four years, at least 50% of Japanese homes featured one of Toshiba’s rice cookers and the rest, as they say, is history!