Everything You Need to Know About Flush Mount Ceiling Fans

Flush mounted ceiling fans are perfect for areas with low ceilings that do not allow for other types of ceiling fans to be installed. These fans are mounted right to the ceiling and have no need for the center rods that other ceiling fans need in order to operate. The blades of the fan will be 6-10 inches from the ceiling. If you have a low ceiling in your home then this could be the perfect choice for your needs.

One of the most important things to remember about using these types of fans is make sure they are at least 18 inches from the wall for the air to circulate properly. This might make it a bit more difficult to install the fan, but it's essential to ensure that the air circulates around the room effectively.

These types of fans are extremely economic making them a very affordable choice for many people today. They will provide you with sufficient ventilation to keep the area moderately cool while in use. Before you decide on which fan is right for your needs make sure that you get a good quality fan that will last and give you the best performance.

Since these fans are typically smaller than other types they can be the perfect choice for hallways or bedrooms. These fans also do a better job of circulating the air in your home. This is due to them being installed so close to the ceiling. There are also several models available today that include different types of light fixtures. This makes the fan look nicer and can help you save space since you no longer need other light fixtures in the space.

There is a wide selection of ceiling fans available on the market today. They also come in a wide variety of finishes and designs making it easy for you to find the perfect model for your home that will match your décor. Whether you want a style with modern flare or prefer something more traditional you can be assured that you will find the perfect fan to fit your style.

Products, Providers, and More: A Guide to Finding the Best Hearing Aid Supplies

You might be wondering if your hearing needs a little assistance. Here is some information on determining whether you need hearing aid supplies and which kinds of companies to look to if you do.

So You Think You Might Need Hearing Aid Supplies

You might be wondering if your ears are functioning properly. Maybe you don’t notice that the telephone or doorbell is ringing. Perhaps you have difficulty understanding conversations and find yourself saying “What?” a lot, especially when talking to a group of people, a young child, or someone with a speech impediment. If you’ve been noticing this more and more, it’s probably time to consult a professional to see if there is a problem and what that problem might be.

An ear, nose, and throat doctor (ENT), an audiologist, or even a trained specialist at a hearing aid supplies dispensary can give you a test.

Some potential problems include conductive hearing loss-which affects the middle or outer ear and blocks sounds from reaching the inner ear-and sensorineural loss, whereby the nerves in the inner ear itself have been impaired. The latter is the most frequently occurring problem and often happens naturally with age. You might also be suffering from mixed hearing loss, which isn’t too common but happens when both issues are affecting the person at once.

Once the issue has been diagnosed, you can find the proper hearing aid supplies to restore functionality and improve your quality of life.

Types of Products

Some devices are worn inside the ear (ITE) and are usually tailor-made for the individual customer. Some are worn on top of or behind the ear (BTE) and feature tubing that snakes down inside.

Within these basic categorizations, there are many variations in style, size, capacity, and other features. Your doctor or a supply company can help you find the option that works best for you.

Finding the Best Provider

There are many things to look for when choosing a provider for your hearing aid supplies. Look for a company that is reputable and staffed by friendly, knowledgeable professionals. You need people who can provide the best advice for choosing and using your device-and who can provide maintenance, repairs, and/or replacements if anything goes wrong. Experienced suppliers can provide cleaning and adjustments as needed to the product you choose. Customer testimonials and business ratings are a good way to see what others have to say. Your audiologist may also be able to offer recommendations.

Top-quality companies will offer a wide range of brands and styles to meet various customer needs. Be on the lookout for other types of products that might be suited to your specific medical concern and lifestyle as well. Many companies offer things like water plugs and high-volume plugs to protect swimmers, musicians, and others. Some also offer protection specific to gun blasts that is essential for people like police officers and hunters.

If you have concerns, get tested and do some research to find the supplier that is right for you.

Why Modern Home Design Is Oh So Wright

Frank Lloyd Wright was not only considered one of the world's greatest contemporary architects, but was also one of the most prolific and controversial public figures of his time. He was a writer, art collector, philosopher and visionary, all of which combined to inspire his craft. An outdoorsy child, Wright fell deeply in love with the Wisconsin landscape he explored as a boy. "The modeling of the hills, the weaving and fabric that clings to them, the look of it all in tender green or covered with snow or in full glow of summer that bursts into the blaze of autumn," he later reminisced.

Widely known for four distinct architectural styles, his work stemmed from his belief that buildings should be made from the land, and benefit the land.

  • Prairie: Born out of his belief that we needed fewer, larger rooms that flowed more easily and incorporated low pitched roofs, overhanging eaves, a central chimney, and open floor plans which, he believed, was the antidote to the bounded, closed-in look of the Victorian era.
  • Textile: these took on a more linear approach, combined with influences from Mayan architecture.
  • Organic: this drew from natural resources, combined with the influence of Japanese architecture.
  • Usonian: smaller than his sprawling Prairie style residences, these contained little ornamentation and missing basements or attitudes. These homes were set up into zones, typically with three areas: living space, small bedrooms, and a kitchen-dining area. Built-in components and furniture allowed homeowners to appreciate the simpler, integrated space Wright intended.

Frank Lloyd Wright was clearly a man ahead of his time. The design of many of his homes once seemed light-years ahead of their time, and people often had trouble understanding his vision, yet almost all of our modern home design and custom home building construction puts to use the ideals he thought so important.

The works of Frank Lloyd Wright are unique. No two homes or buildings look alike. He built according to his vision of what the future would be. He saw the need for homes to be more fluid, more open, more liveable, and less restrained. His architecture both documented a time in history and yet managed to push the envelope with his modern philosophical approach to the future of building.

Wright stand for clean lines and simplicity. He believed that a well-built building complemented its environment and surrounding. He disliked the intricate detail and fussiness of the architectural styles that preceded him. His ideals, words and foresight continue to be used as inspiration for modern home design and custom home builders. The echoes of his style are evident in many of the contemporary homes we see designed today.

Two Car Garage Plans Could Be Yours

If you are in the market to build a new garage then you have probably been looking at 2 car garage plan. According to a 2008 Experian Automotive survey, the average family owns just slightly more than 2 cars. This most likely explains the popularity of two car garage building plans. According to their analysis, the number of families with either 1, 2 or 3 cars in the household are somewhat evenly divided with slightly more households having 1 car than 2 cars, although fairly surprisingly, more households owning three cars rather than either one or two automobiles. The particulars from the report are 34% 1 car households, 31% 2 car households and 35% 3 car households. Every situation is different and you’ll need to find your balance between how many autos you need to protect in your garage and all of the other extenuating circumstances.

How will you know the best two car garage plans for your situation? That is dependent a lot on what need you are trying to fill; what predicament you are trying to solve; how much space you have; and of course, your financial position. Here are some things you should ask yourself:

1. How much area do you have for a garage?

2. Are your vehicles normal size or larger?

3. Are you looking for a living area (apartment, loft) with the garage?

4. Need a work shop?

5. What is your financial plan for constructing a garage?

6. Do you have a unique requirement, such as RV storage for the garage?

You could just start off with an unsystematic hunt for 2 car garage plans until you hit upon one that suits your requirements – there are plenty of available choices out there. It makes a lot more sense to answer the garage buying questions listed above before you start your search for garage plans. It does not make sense to look for 2 car garage plans just to find out the one you love has an apartment when you don’t really need an apartment. For some general guidelines on selecting 2 car garage plans do a search on the term ‘2 car garage plans buying tips’.

For some people the best thing to do is use a General Contractor (GC) to run their garage building project. The GC will deal with using the services of subcontractors and making sure everything goes according to plan on your garage construction project. Having a dependable GC can go a long way towards fixing any issues that may trouble your project. For more information do an online search for something like ‘how to find and select a general contractor for your garage building project’.

Have you thought about where you are going to put up your new garage? Additional questions that might help you determine your garage building location include: Are you building close to the access road? Can you keep an eye on the garage from the home? You will have to keep up the driveway just like any other portion of your land. Give some thought to the architectural design of the 2 car garage plans you choose – you may want to match up with or complement your 2 car garage to the surrounding buildings on your land. And don’t forget something like running electricity and plumbing to your new garage!

The majority of 2 car garage building plans exist in four formats:

  • Paper prints
  • CAD files
  • Reproducible prints
  • Files for download that you can print

A lot of e-commerce sites meant for garage building plans will offer every one of these distribution methods. It is strictly dependent on your circumstances as to which format is best suited for you. To find out about every one of the various 2 car garage plans drawing formats look for articles about ‘garage plans drawing formats’ online.

Why don’t you add a skylight to your garage? Windows do a good job of letting in sunshine, but you could make use of that spot for something else such as shelves. And windows can be a pathway into your garage for people you might rather keep out. Skylights can give you more light and more protection than another window. Go do some research online to help you find out if a skylight could be a worthwhile addition to your two car garage plans.

How to Maintain Siding

In the grand scheme of home improvements, siding is one of the greatest investments that a homeowner is bound to make. Each type of siding material comes with its own set of rules and instructions for proper upkeep, and of course, some materials require more maintenance than others.

Vinyl is an appealing siding option for many homeowners because it is relatively maintenance- free. However, vinyl does require a good power wash at least once a year. On top of this, if you notice that a certain section of your vinyl siding has gotten dirty, then a simple hose cleaning to remove the grime is a good idea. The longer the dirt fits there, the more it is likely to set in. So it's better to tackle the problem shortly after you become aware of it. You'll also want to make sure that any cleaning solution you use will not harm the siding or strip it of its color. Your siding contractor can advise you on what types of cleaners are suitable for siding maintenance, or you can ask an associate at your local hardware store for a recommendation.

Stucco is another low-maintenance material that requires little effort on the part of the homeowner. Usually, the occasional power wash will usually do the trick. However, if you begin to notice cracks in your stucco, then be sure to get them repaired as soon as possible to avoid bigger problems down the road.

Fiber cement is another type of siding that does not demand a great deal of maintenance. But a regularly-scheduled power wash is certainly in order. Homeowners with fiber cement siding should also make sure to repaint it as necessary.

Of all the siding materials available to homeowners, wood requires the highest degree of maintenance. When it comes to wood, it is important to be proactive in tackling wear and tear. Many contractors will liken wood siding maintenance to that of hardwood floors; it requires consistent care, but offers a wonderfully aesthetic reward. To wash wood siding, it is preferred to use a hose and not a power washer. The key is to only apply light pressure so as not to cause the paint or sealant to come off. A safe cleaner for natural wood is oxygen bleach, as it will not strip the siding of its color or damage any surrounding vegetation. Of course, even with the appropriate cleaning materials, wood siding will still need to be repainted every number of years. It is also important that homeowners reapply stain and sealant as per the siding company and manufacturer's recommendations to ensure that the wood stays properly protected. The more protected the wood, the less likely it is to rot and degrade over time.

Every homeowner should remember that with siding installation comes an extended commitment on his part to properly maintain this rather significant investment. A modest yet consistent effort on the part of the homeowner can result in preserved siding that will last for many years to come.

How Dirtyishes And Stale Bread Saved The World

Home Remedies – Facts or Quacks?

That's what I recently asked myself. Myths and legends often have their basis in a grain of truth. So I surprised if home remedies, alternative treatments, and folklore cures might also be based on truth. A little research provided some astounding results!

He Was No Martha Stewart

In fact, Alexander Fleming had no housekeeping skills whatsoever. During the early 1900s, Petri dishes, beakers, and test tubes were piled around his lab like dirty dishes in a bachelor's sink. That may be appropriate, because he was studying the growth of bacteria and molds. I'm sure he had no trouble getting either of those to grow in his lab. I'm not sure how he kept his experiences separate.

Cashing In On Some Bread

Fortunately, there was at least one experiment that got contaminated. He discovered that a mold growth called Penicillium (because the cells are pencil-shaped) had killed the bacteria he was culturing in one of his test dishes. The Penicillium mold is often found on bread. He was able to isolate the chemicals in the mold which killed the bacteria, which are now known as penicillins.

A Miracle Cure Is Born

The antibiotic effects of penicillin, and its cousin cephalosporin, proved to be a great aid to the medical community in fighting bacterial illnesses and diseases. Over the years these molecules have been enhanced to help them fight bacteria which had become resistant. Penicillin is still saving lives today, simply because Al Fleming was a slob. Thankfully, he was smart enough to notice his mistake and understand what it meant.

Eating moldy bread is not going to cure your illness. Instead, you might need a shot of penicillin to fight the effects of your ill-advised snack! In this case, however, this home remedy discovery is definitely a fact.

Three Best Mutilation Short Stories

Mutant short story is about how a human being become transformed into a grotesque mutant through scientific experiments. The experiment is often performed by scientist who has a weird theory or is suffer from some sorts of emotional trauma. Many classic mutant short stories are written and this inspires the creation of other modern mutant stories. The following are the 3 best mutant short stories of all time.

1. Frankenstein by Mary Shelley

In Frankenstein, a young man named Victor Frankenstein lost his mother weeks before his departure for University of Ingolstadt. To overcome his depression, he immerses himself in his experiments. While at the university, he discovers a technology that can give life to dead matter. After this, he creates a creature model that is huge with yellow eyes and its skin is barely hiding the muscle tissue.

Later, Victor return to his home and learn about the death of his brother, William. When he return to Geneva, he saw the creature he created climbing a mountain. The creature demands Victor to create a female companion or he will kill him. Victor begins creating the female companion afterwards but he tears it apart when he fears that they would breed into an evil human race.

2. Strange Case of Dr Jekyll and Mr. Hyde by Robert Louis Stevenson

Dr. Henry Jekyll is a scientist who has an ambition to create a breakthrough in human so that their soul will be good and never go to hell. At last, he creates a potion and test it himself by drinking it. After drinking the potion, the devil takes form in him and he becomes Edward Hyde. It is an agreement that he makes with the devil that they will take turn.

The devil is to drink the potion again so that he could turn back into the original person, Dr. Henry Jekyll. Edward Hyde, being a devil himself is an evil man and he commits a lots of crimes while taking form in Dr. Henry Jekyll’s body. One day, the chemicals that he produces no longer work due to the impurity of the ingredients. Jekyll knows that he would become Hyde forever and decides to commit suicide.

3. Teenage Mutant Ninja Turtles (TMNT) by Kevin Eastman and Peter Laird

Four small turtles who live in the sewer of New York City transform into a humanoid turtles when they are crawling around some ooze. The four turtles are Leonardo who wears the blue mask and carries 2 katana; Michelangelo who wears the orange mask and his hobby is eating pizza; Donatello who wears purple mask and carries the bo staff; and Raphael who wears the red mask and is armed with a sai.

Their master is the rat sensei teaches them the ninja skills. The four turtles go around New York City saving innocent people who are being harmed by criminals. The criminals often have to do with Shredder, the master of the evil ninjutsu clan called Foot clan. They work along with April O’ Neil, the TV broadcaster who help them in tracking down the criminals.

Effective Homemade Hair Masks For Dry, Oily, And Split-Ended Hair

Hair is just like a fashion accessory because it is styled in a way that can complement different clothes, styles, and even our personality. However, while on the process of doing so, our hair can sometimes suffer from a lot of damages that may range from oily hair to split ends. Homemade hair masks can help you restore the luxuriousness of your hair without having to pay big bucks at a salon.


There are different kinds of homemade masks that target different kinds of issues. One of the most common issues is dry or damaged hair. This is caused by a variety of factors such as over use of hair tools and prolonged sun exposure. Your hair may appear dry and brittle. Here are a couple different masks you can do at home that will be able to put some moisture back into your hair.

Olive Oil Mask

Olive oil is not just made for cookin’, it’s made for your hair too. It has great conditioning properties that can definitely put the shine back on your hair. Use a good quality olive oil (try looking for cold-pressed extra virgin olive oil that is made from organic olives because this process doesn’t destroy the vitamins, enzymes and other good stuff). Get 20ml of warm oil (not hot, mind you. You don’t want to have deep fried hair for breakfast), grab a wide tooth comb, and brush your hair through, making sure that it is evenly distributed all throughout. Leave it on for half an hour and then wash with a gentle shampoo. If you really have severe damage, you can leave it on overnight and wash it in the morning.

Moisturizing and Nourishing Egg Mask For Dry Hair

In a bowl, combine one egg, 1 tablespoon of vinegar and 2 tablespoons of olive oil. Mix them all together very well, and apply it on your hair using a comb in order to distribute it evenly. Massage it onto the scalp in order to promote good blood circulation. Leave it on for 15 minutes and rinse off.


Another dilemma is having oily hair. Most of the time this is caused by frequent exposure to dust and dirt. Overactive oil glands (sebaceous glands) are also the cause. This type of hair needs proper washing because it makes the hair appear greasy and dull. There are also a couple of homemade hair masks that can definitely help you maintain healthy looking hair.

Pre-Shampoo Parsley Nourishing Mask

We all know that parsley is a great addition to your yummy dishes, but it also has properties that can give nutritious benefits to your hair. You need 100 grams of strained parsley, roughly chopped, 1 teaspoon of vodka and 2 tablespoons of castor oil. Mix it well, and rub into the roots (parsley can help stimulate growth as well). Let it stay for half an hour and then rinse with vinegar. This is a pre-shampoo mask, so don’t worry about your hair smelling like vinegar. Use a gentle shampoo when you wash afterwards.

Yogurt Egg mask for Oily Hair

Yogurt has such great benefits that it is even used to make hair healthier. Egg yolk also has conditioning properties that helps make your hair appear luscious. All you have to do is combine 1 egg with 50 grams of yogurt and apply to hair that is already washed. Leave it on for 30 minutes and rinse it off with warm water.


Split ends are one of the worst hair problems that one can have (myself included). This happens when the protective cuticle of the hair is destroyed, which thus makes the hair split into two. Frequent exposure to harsh chemicals (especially when you color your hair often), hair tools and the like causes it to get badly damaged. The only way to get rid of it is to cut it with scissors.

Honey Mask For Split Ends

Honey has properties that can help keep the hair moisturized, and therefore can help prevent split ends from occurring. Give your ends that much needed love by mixing 2 tablespoons of honey, 1 tablespoon of vinegar and 1 tablespoon of almond oil. Mix them well and apply it on the hair, concentrating on the ends. Leave it on for half an hour and rinse well with tolerably hot water (it makes it easier to remove excess oil and honey).

Your kitchen can have all of the ingredients that you would need in order to make organic, homemade hair masks. Use them at least once a week, depending on the severity of the problem. This way, you will be able to bid these hair problems adieu!

Planning For Emergency Financial Situations

Emergency financial situations can happen to anybody and any financial arrangement exercise is not ideal without planning for such occasions. The whole idea of having an emergency fund is to offer a cushion against any unexpected expense.

This will ensure it does not have any negative impact on your financial condition and does not rip off the whole financial security.

There are many circumstances which can cause a financial emergency such as a sudden illness, accident, medical emergencies, emergency house repairs, loss of a job, emergency car repairs and much more.

The major reason for having an emergency fund is very clear because when a person falls into an emergency financial situation, they will have to break their savings or make a compromise to get the needed money.

It’s not rare to find people who just take out their credit card and swipe it for hard cash. Opposing popular opinions, credit cards are the worst way to fund any financial emergency. The fastest way to get thousands of dollars its to get a car title loan it is not a long-term solution but a short-term solution.

In a circumstance where you’ve taken a cash advance with your credit card to get the needed money, the credit card company will charge you a cash advance fee with an interest rate. This is a very costly way to borrow and manage finances for emergency situations.

Therefore, what is the best amount that should be set aside as emergency money? There are diverse opinions on it. Some professional’s experts agree that a minimum of 3-6 months’ worth of monthly income should be set aside for an emergency situation. This amount can differ according to marital status, the size of family and lifestyle.

Everyone must reserve some extra cash in case of emergencies. But, the amount to reserve depends on your income and monthly expenses. The amount that is needed for your emergency fund is open to debate, the minimum amount should be sufficient to cover your expenses for daily living for at least 3 months. It’s also ideal to save for 6 months even though some financial advisers agree on a full year worth of cash.

These funds must be kept aside in an instrument, which is easily available when needed. It could be money in a bank account, hard cash, liquid funds or fixed deposits. This will ensure the fund is always accessible instantly or within a short period when it’s needed.

Where to Keep the Cash

Your situations and what can offer you peace of mind are the factors that can help you determine how cautious you want to be. Keep your emergency fund somewhere that is safe and accessible because you may be required to get the cash in a hurry when an emergency arises. The best option you’ve is to open a money market account or savings account. But, always examine their offer with regards to the interest rate, minimum balance, and other terms.

When you think you’ve saved enough, you can stop. You can now sleep easier and try to start placing your extra saving into higher-interest and less accessible accounts or investments.

Common Commercial Roofing Materials

The most important part of any kind of building is the roof. All roofs are designed to protect the rest of the structure. If the structure is not built with a roof that is compliant with the overall structural design, the building would be destroyed by nature alone.

Commercial roofing is a building material that is used for protecting and sealing the top of a commercial structure. Unlike residential roofing that is steeply sloped, commercial roofing generally has a flat slope.

Different materials are used to create commercial roofing systems and each type has benefits and disadvantages:

  1. Slate roofing Slate roofing is expensive. However, slate can last from tens to hundreds of years. So, if you consider the longevity of the material, it can turn out to be the most cost-effective roofing material. Slate roofing materials are beautiful roofing systems available in a variety of sizes and thicknesses. They are also low maintenance because slate is naturally resistant to algae and moss. Slate roofing systems are fireproof and water repellent. They are also highly resistant to hail and wind. Slate is also eco-friendly in that when they need to be replaced they can be discarded as clean land fill or they can be recycled and used for roofing again.
  2. Asphalt Shingles Asphalt shingles are commonly used by many steep-slope commercial roofing applications. It comes in many colors and styles. They are affordable and application is easy. However, this material deteriorates easily. It is not resistant to high winds and have been known to be blown off the roof. Asphalt shingle scar very easily under that hot sun and they are prone to mildew and moss in places with moist climates. This material is also not environmentally friendly.
  3. Metal roofing Metal roofing involves a high cost of installation. It is also susceptible to wind damage. It can be quite noisy when it rains or when it hails. In addition to that, a metal roof is easily scratched or dented. Despite these disadvantages however, it is still a favorite of many roofing experts because it is strong, durable and fire resistant. It is very low maintenance, earth-friendly and recyclable.
  4. Built up roofing These roofing systems are often referred to as "tar and gravel" roofs. It is one of the oldest and most reliable commercial roofing systems for flat roof structures. It consist of multiple plies of roof felts laminated together with bitumen. The original cost of a BUR system is greater than other roofing systems but it is a favorite of architects, engineers, building owners, roofing manufacturers and contractors. It has a proven track record of reaching 150 years. It is thick and durable and can be used in waterproofing applications. Even after many years of service, it can still be maintained and repaired for extended life. However, it can be quite expensive to transport this material. It is heavy and the material is not stable at high temperatures.
  5. Modified Bitumen Modified Bitumen roofing is asphalt-based and closely related to Built up roofing (BUR) and is also used on low-slope or flat roof structures. Modified Bitumen gives designers a bolder array of options compared to BUR. Additionally, Modified Bitumen products undergo the same fire and uplift resistance testing standards that BUR goes through. A big disadvantage of Modified Bitumen Roofing Systems is that it is not absolutely effective on flat roofs because it has only one layer and when there is a downpour and the roof area becomes totally submerged, water can find even the smallest opening. If this happens, water will see through your roof.
  6. Single Ply Roofing Single ply roofing systems are formed from multiple layers of barriers and insulations that have been fastened together mechanically. It is reliably easy to apply since it is lightweight and thin. It is environmentally friendly because you can recycle it. However, these roofing systems are more expensive than other materials. If people are going to step on this material, it will also need a protective surface.

Just like other building materials, you have to consider many factors before you decide what kind of roofing material you will use for your business. While you may have your own preference, it is best to consult a roofing expert so that you will make the right decision.

Here Are 6 Simple (Not Easy) Steps to Profitable Internet Marketing

I’m feeling rested because I took the week off from working out. My body has gone through some rigorous training the last couple of months and I just felt exhausted.

That’s usually a sure sign to just take it easy.

My younger self would have just pushed it and probably got hurt. I’m older and wiser now, over the years I’ve learned to listen to my body. Especially, when it comes to lifting weights.

The weights are merciless.

It’ll break you if you’re not careful.

Yesterday, I covered the 7 powerful strategies to implement before you start Internet Marketing for your local brick-and-mortar, e-commerce and start up business.

These are areas the majority miss the boat on and it costs them in money and time.

My intention with yesterday’s article was to help you get up to speed quickly without making costly mistakes. Click here to read yesterday’s article.

A client asked me earlier this morning: Eric, if you were to distill down the most important steps to start profitably Internet Marketing, what would they be?

I thought the answer to this question to be the perfect follow up to yesterday’s article because it’s scary when you first start Internet Marketing. I know from personal experience.

Not to mention a little bit intimidating. However, if you follow these six steps, you can begin Internet Marketing with a solid foundation.

A solid foundation is key to growing a successful business that leverages proven 21st century marketing strategies and technology.

Here are 6 simple (not easy) steps to profitable Internet Marketing:

1. Decide on an Internet Marketing (IM) model. There are 3 proven IM models you can deploy now.

Tomorrow, I’ll go deep into these IM models that are proven time and time again to work like gangbusters!

You’ll then be able to decide which model to deploy that suits your style and unique talents.

For now, let me give you a quick introduction to these IM models so you can get started in the right direction:

First, there’s Affiliate Marketing that involves promoting someone else’s product or service for a significant share of the sale.

Typically, most affiliate programs are commission based.

The second IM model is Info-Product Creation where you create a digital product such as an eBook or multi-media course. Your content is protected in a membership site.

Third, there’s Service-based models that involves you providing a service. The service can be delivered online or offline but you’re advertising and marketing that service online.

Dahl Integration Marketing is a great example of all these IM models.

We have our own Info-products that we promote, we also promote others products and services.

And we have our own Funnel Vision Method suite of services that helps businesses grow their lead, customer and patient base.

Fourth, you can sell products using online shopping centers such as Amazon and eBay.

2. Decide what you want to sell. After choosing an IM model you prefer, it’s time to decide what you want to sell. Let’s use affiliate marketing as an example.

What product or service do you want to promote? ClickBank.com ( http://www.clickbank.com ) has tens of thousands of digital products that you can promote as an affiliate.

You can promote e-business products, health & fitness, spiritual products and more. The best way to decide on what to sell is to start with your passion.

What are you passionate about?

What is it that really drives you to get up in the morning?

From my experience, you’ll find out that pursuing something you actually love (or interested in) makes it a lot more fun and interesting.

If you’re going to go the “services” route, you need to decide on what you want to offer as a service.

Are you good at writing?

How about designing?

If you’re already an established business offline, like many of my clients, then consider taking your proven service online.

3. Create or prepare your offer. Let’s say you go the product creation route. The next step is to create your product.

If it’s an eBook you’re creating, either write it or outsource the writing (more on this topic will be explained in later articles).

As a general guide, if you have time, create the product yourself. On the contrary, if you don’t have time, outsource it. Both paths have its own pros and cons, but I’ll explain more in later articles.

If you’re promoting a service then all you need might be a simple sales page. Obviously, without exposure you won’t make any sales, so you need traffic.

Follow these next 4-6 steps to make sure your business thrives with more leads, clients, patients and referrals effortlessly…

… Contrary to popular belief successful Internet Marketing goes way beyond just maintaining your website.

It’s also about growing your business strategically so you can EXTRACT profits in the long run. Here are three essential steps to follow to ensure your business stays profitable while you make the offline-to-online transition.

4. Attract More Traffic. No, this doesn’t involve driving around town avoiding city traffic. The term means increasing the number of times people come to your website through searches and links on other sites, because they’re looking for the products and services you have to offer.

This requires you to find as many ways of attracting traffic as you can. There are never any guarantees that one method for getting traffic, will even work, let alone, work well enough to bring in plenty of extra business or keep working long-term.

Diversification is the name of the game when it comes to traffic generation.

You can use:

Article marketing

Email marketing

Pay-per-click advertising

Solo ads

And other methods to help get more people to check out your offers and hopefully become leads and ultimately loyal customers.

NOTE: If you’re interested in mastering traffic, I recommend you purchase one of our best-selling products, Internet Traffic Mastery.

5. Make sales.

PRO TIP: Once you have people visiting your sites, send new traffic to a landing page (I’ll share more on this strategy in later articles).

You’ll start seeing sales happening as people find you through your digital advertising methods and join your email list.

The success you experience will depend on how consistently you advertise and market your business. Repeat customers are the best so always look after every client you attract.

Eventually you should start to make regular sales but it won’t happen overnight. You have to give yourself time to build your pipeline.

For instance, just having 20 people on your list, although a great start, isn’t going to lead to serious success.

It’s the consistent additions to your list over time, that’ll lead to serious success…

… Levels of success you can’t even dream of…

… until it happens to you!

Stay consistent my friend!

6. Keep your clients coming back for more. Making the right first impression on your clients will get you that first sale.

It’s critical to take good care of current customers because it’s far easier to keep a customer, than to acquire a new one.

Do everything you can to outperform your competitors, in every possible way, so that your customers have no reason to go elsewhere.

In conclusion, I just gave you a taste of how Internet Marketing works and tomorrow I’ll start a deep dive into the 3 IM models to help you choose the one that suits you best.

I know there’s one that will suit your interests and complement your skills.

In reality, the Internet can give you countless possibilities in business and earnings. I’ll focus on the most proven ones.

These 3 IM models are known to have launched thousands of Internet businesses all over the world, help startups become successful and scaled local brick-and-mortar businesses…

… to heights you couldn’t even fathom.

By the way, if you’d like to take the guesswork out of growing your business online then click here to get the ultimate shortcut.

Staging A Home

Staging works because buyers have a very hard time having a vision of how they can extremely live in a home. Stagers help the sellers with paint colors to maximize buyer interest with what's popular right now. Remember, once you are ready to sell your house, you need to give the buyers what they will want to see, not what your personal tastes are. The hardest part is letting go, but once you do and you will increase the traffic and desirability of your home, absolutely helping you realize the price you want to sell it for.

You do not need to go crazy staging the whole house. It has a tendency to be over-kill and anticipates the prospective buyer from being able to visualize their furniture in the home. Taking out the extra stuff you do not use in your home daily, will go a long way in setting the stage for rooms that would not have considered the central focus on a home sale, like the bedrooms. Stage the main living areas as well as the master bedroom and leave the rest to the buyers imagination.

The cost of staging a home depends on a number of factors. It's often between $ 1,500 and $ 5,000. The various items that create the difference in cost will include the amount of furniture and accessories used in the staging. The quality of the furniture, the number of rooms staged as well as the length of time the home will be stood for. You'll also find that staging costs vary among others. Have several give you an evaluation and estimate.

Many stagers have their own furniture in stock while other stagers rented furniture out for staging. As for price, this will depend on the area of ​​the country that you live in, so these costs can vary greatly and your best bet is to speak with a local stager to find out their price ranges and what is offered within their estimates. Make sure to find out if rented pieces have a minimum amount of rental time required with the contract.

You should consider staging to be a vital part of the marketing process. A staged home will generally sell for more than a home that has not been staged. The increase in the sale price is often considering more than the cost of the staging and if you are holding a mortgage, the faster you turn your home over, the less you have spent in finance charges. It's a win for the sellers as far as marketing your home goes.

The fastest way to find a good home stager may be straight through your local real estate agent. If your agent is not aware of the technique, either you should look for an agent that is and hire them to get your house sold!

"Body Language – 'Hands' – How To Immediately Win More Negotiations" – Negotiation Tip of the Week

Do you observe the body language of someone's hands when you're negotiating? To win more negotiations , you should listen to their hands! Hands convey a lot of hidden information in a negotiation.

There's so much information conveyed by the way someone uses their hands. People use them to show appreciation by clapping. They display their hands to exhibit displeasure in other ways (ie sitting on their hands). They also use their hands when speaking? Hands give insight into the thought process that someone has. As someone is speaking, their hands add or detract from the message they're delivering; you do the same when you're conveying information, too.

When there's a difference between someone's words and their body language, pay more attention to their body language. It will tell someone's intent more than their words. Consider the following lightly when conversing with someone. Consider it more sturdy when you're negotiating.

Hands close to the body
The closer someone has their hands to their body, the more guarded are their thoughts. You'll see this display when someone senses perceives threats to their well-being. Their hands are in that position to protect themselves from perceived indifference.

If you see this in a negotiation, it may behoove you to put the other negotiator at ease. Based on what caused him to display his guarded gesture, you may have to address that point before you can induce the comfort you seek to invoke in him.

Hands with interlocking fingers –
When you observe a negotiator in this position, he could be displaying a demeanor that states that he's not open to your offer, suggestion, or counteroffer. To confirm your observation, consider questioning him about the meaning of his display (eg I noticed you have your hands closed and your fingers locked. ) is not open to something that has occurred. Is anything wrong?). Then, note his response. If he unlaces his fingers and opens his hands, while saying everything is okay, ask him to proceed. Two things will have happened. One, you will have altered his body language, which will entice him to become more mentally receptive to you and your offers. Two, you will have given him the lead in the negotiation. Based on what he does with it, he'll give insight about what caused the initial display that you brought into question. And, he'll give a vision to what he'd like to discuss. That will highlight what's important to him.
Hands pushed away palms out
Take special note of this gesture because it indicates that the originator wants no part of what caused him to display the gesture. You can note future discernment by the degree that he forces this gesture outward. Also, be aware of this gesture when the other negotiator votes his assertion that he's in agreement with you. In this case, his body language belies his true feelings. Believe that more than his words.

There are other hand gestures that give insight into a negotiator's thought process. We'll leave those to discuss at another time. For now, note the signals mentioned above. In so doing, you'll be more perceptive. That will assist you in winning more negotiations … and everything will be right with the world.

Remember, you're always negotiating!

Super Alloy Parts in Aviation

The first successful flights of jet engine-powered airplanes (in World War II, by the German and British military) were made with materials-limited engines of relatively modest performance. As they advanced, jet engines continued to be materials oriented. Nonetheless, examination of materials progress since 1942 shows a spectacular series of developments that permitted uninterrupted increases in temperature and operating stress. The developments were both process- and alloy-oriented, and often a combination of the two. As a result the net 800-lb thrust of the 1942 Whittle engine has risen to the level of 65,000 lb-a factor of 80 in a little over 40 years.

Initially, cobalt-base alloys emerged as the leaders for blade manufacture, while iron-base alloys served for lower temperature requirements, disks, for example. From more or less improved conventional practice, wrought alloys, such as S-816, gave way to the coarse-grained precision-cast cobalt-base alloy parts. Then, industry learned how to control the grain size and structure, designers learned how to live with less-than-desired ductilities, and operating temperatures climbed to 815 °C (1500 °F). Precision casting of super alloy parts, then and now, continue to play a commanding role in the super alloy world.

There were parallel developments in Ni-base systems, the valuable, flexible, and now dominant -y/,y’-strengthened alloys. Here, it took the process development of vacuum metallurgy to make possible the production of strong “high alloy” compositions by controlling the impurity levels. Then still higher alloy contents, leading to greater

strength and temperature potential, were realized through the development of remelting technologies, of which vacuum arc remelting is the most outstanding. These developments required unparalleled efforts by research and development groups to demonstrate and evaluate the roles of alloy composition and structure, to use the benefit of purity levels previously considered unattainable, and to develop advanced techniques to further modify the structures and the chemistries to solve special problems. Ultimately, this led to the exciting developments of directionally solidified and single-crystal blades, the latter reaching engine application only very recently.

Austenitic super alloy parts.

Throughout this period, the concern among metallurgists, designers, and manufacturers was always that the nickel-base and cobalt-base alloys ultimately would have to be replaced with higher-melting alloy systems, the refractory metals. This is hardly surprising when one realizes that increased alloying tends to produce lower-melting alloys; here were alloys being used at higher and higher fractions of their melting temperatures!

At first, major efforts were made with alloys of molybdenum and columbium (niobium). These were without success for the then-planned operating temperatures and anticipated lifetimes, but they may still hold promise for temperatures above about 1100 °C (2000 °F) if suitable coatings can be found. Excellent strength levels were realized and some promising coatings were developed, but expected lifetimes were not realized. Later, chromium-base alloys looked to be a natural, but ultimately were not successful because of brittleness problems.

We must also mention the early trials with cermets, and the first of a series of ceramic-age developments from 1950 onwards, both of which produced interesting solid structures, but still no acceptable applications in the super alloy competition. The austenitic super alloys remained dominant.

With the advent of rapid solidification processing, alloys of still more complexity are being developed and studied, now with the advantage of even closer control over impurity segregation and structure of desired phases. Further, production of superfine grain sizes and structures in the powder metallurgy area makes superplasticity easy to achieve and use. Nominally, cast alloys such as IN-100 and Mar-M 509 are made very strong at low and intermediate temperatures and are easily formable into complex shapes, including near-net-shapes. In the 1960s, who would ever have predicted that IN-100, a casting alloy, could be made to be superplastic and a candidate for disk applications at about 650-700 °C (1200-1300 °F)? Superplastic structures can be expected to have a major impact on super alloy technology.

ODS super alloy parts.

Finally, we are beginning to see significant applications of ODS (oxide-dispersion-strengthened) alloys, again using a blend of processes and alloying techniques developed over the intervening years. Mechanical alloying, and now the use of RS (rapid solidification; fine, fully alloyed powders), will permit use of ODS nickelbase and cobalt-base alloys to temperatures in excess of 1100 °C (2000 °F).

Use at 1100 °C (2000 °F) and above for alloys melting under 1400 °C (2550 °F)? Use in excess of 80% of the absolute melting temperature? Yes, that time has arrived. Even higher fractions of the melting point may be achieved with metalmatrix composites.

In summary, the extremely effective interplay of alloying processes with alloy compositions and structures, coupled with excellent supporting scientific studies of structures, properties, and stability have given the super alloys an engineering position never dreamed of by their early proponents!

Alternative alloys and materials are being sought but have not yet emerged. These new materials are being studied to replace or supercede super alloy parts.