Prominence Of Residential And Commercial Garage Door Repair Services

The garage door is supposed to be the largest entry to any residential or commercial building. It is necessary to keep it as smooth as possible all the time in order to eliminate the risk of accidents. Proper inspection, regular maintenance and check-up are necessary to ensure safety and security as well. Ill-maintained garage doors erect the potential risk of accidents, which may put life under threat. Therefore, it should not be left unprotected for long periods and immediate consultation and maintenance is recommended.

Practically, the most common types of door repairs are motor adjustment, removing of excessive dust and oil, broken torsion spring, split cables, bent panels, stripped motor trolleys, faulty drums and hinges. Only an experienced technician can understand the overall health and can offer better maintenance and repairing solutions for smooth and efficient operation. Most of the time technicians can get your motor running with some little adjustments after inspection. They can exercise complete care for its installation with replacement parts, sections, hardware, tracks, openers and all the tools required for the job.

Some of the Common Garage Door Service Offered by Repair Specialists Include:

1. Checking the Door Balance

2. Removal of or excessive dirt, debris, oil, grease on the tracks

3. A thorough check of all parts including rollers, hinges, etc

4. Adjustment and checking of the Torsion Springs

5. Lubrication, repair and maintenance of springs, rollers, drums, hinges, struts and cables

6. Inspection of the Door Motor

7. Adjustment of limit switches, checking the force adjustment, etc.

Proper inspection and maintenance of garage doors make them tough, reliable, and long-lasting. Both residential and commercial garage doors are subject to wear and tear and needs careful attention. Before they pose any big challenge to the daily moving people or residents, proper inspection should be scheduled, ensuring complete protection. Therefore, proper installation, maintenance and checking of the automatic openers or shutters are necessary along with their integral parts including springs, rollers, drums, hinges, struts and cables to ensure safe and worry-free operation.

An improperly adjusted automatic opener or shutter, its associated cables, door openers, tracks or even an automatic opener can exert heavy force on the doors, which is a probable risk. Therefore, choosing the right complete repair service provider is of utmost importance. Their technicians not only offer preventive maintenance services but also ensure its optimal performance level, efficiency and safe operation. They render in-person inspection and diagnosis of your automatic opener before quoting a price for service. They even offer expert recommendations and essential services for residential or commercial garage door applications, irrespective of brand or model.

What You Need To Know About Diamond Grinding Wheels

Do you know how diamond wheels are classified?

Diamond wheels are actually classified according to shape, concentration, bond, and grit size. These wheels are used in various grinding and abrasive machining operations. Consequently, diamond grinding wheels are used in grinding machines. In any machining or grinding process, it is always important to use the appropriate grinding wheel.

One of the most widely used grinding wheels today is the diamond and CBN wheels. These come in several types including resin, vitrified, metal, and electro-plated. The most common among these types is the resin wheels. These are used in most tool room and production applications. On the other hand, the vitrified and metal types are newer bond types and are used in specific applications. These are rare and are more expensive. Moreover, these are usually custom made order items. However, electro-plated wheels are typically found in cut-off wheels and low demanding abrasive grinding such as that for plastics.

It is very important to know the different types of diamond grinding wheels and their applications because each of these types is specifically used on specific applications only. Moreover, if you are not using the appropriate wheel type, grinding operations may not be done effectively. Thus, before embarking on any grinding operations, it is essential to determine the type of material to be worked on, and the type of grinding wheel as well.

Diamond and CBN grinding wheels are used in a variety of processes and materials. However, diamond wheels are used strictly on carbides while CBN is used on steels. In some cases though, there are some manufacturers that produce a special grit that can be used on both carbides and steels.

The three types of diamond grinding wheels that are available in the market are synthetic diamond, cubic boron nitride (CBN), and alumina-zirconia. Among these three types, the synthetic diamond is the hardest, while alumina-zirconia is the softest. In selecting the particular type of wheel, there are some important factors to consider.

First and foremost, it is essential to determine the hardness of the item you will be grinding. You should always remember that CBN is most advisable for iron or steel. If the metal is non ferrous though, and a large amount of metal must be removed, a synthetic diamond blade is the most appropriate wheel to use. For soft metals, alumina-zirconia should be used.

Second, look at the nomenclature plate on the grinding apparatus. The speed rating in meters per second is very important in ensuring that the bond of the diamond grit will not separate or disintegrate when used on the grinding apparatus.

Third, determine if the grilling will be done wet or dry. A wet diamond grinding wheel is used for precision cutting while a dry diamond grinding wheel is used for moderate grinding purposes.

Finally, select the coarseness of the wheel according to the amount of metal that will be removed. A coarse grit is most appropriate for fast cutting while a fine grit is used for a finish quality cut.

Air Conditioner Information

The air conditioning unit is a great invention and in certain parts of the country, it is a necessity in order to overcome the summer humidity and heat. This is especially so in the case of southern states where the temperatures soar high and humidity is unavoidable. Similar to the ritualistic spring cleaning and turning the clock ahead to prepare for daylight saving, getting yourself for thecoming summer is a necessary and wise thing to be looked into.

Heating unit repair is one of those tasks which need to be done periodically, irrespective of whether it is done by a paid professional or a handy man that has experience working with mechanical devices. There are multiple types of cooling devices which range from evaporation coolers and wall and window mounted air conditioners to the giant units which are equipped to keep a complete building cool and comfortable. All rooms feature air conditioning, a refrigerator, and a mini bar. It is the size of the interior motor, fans and thermostat, condenser and refrigerant which will differ in different sizes of air conditioners. Irrespective of the difference in size, you will need to consider hiring a repair technician to fix your specific air conditioner.

If you choose to have an air conditioning and heating repair professional help you fix you air conditioner, you will soon realize that there are professionals who specialize in repairing different types of air conditioner, which makes choosing the right professional to help you as important as choosing the right air conditioner for yourself. The important things you need to look into while finding a person to help with the repair are the qualification, experience and the fees charged by him in order to fix your air conditioning unit.

Rates will vary from state to state and person to person but there are a few points to keep in mind while choosing the professional. The first one is that you need to identify a technician who is trained on the specific air conditioning unit owned by you because as indicated earlier, there are technicians who specialize in repairing specific models of air conditioning units only. This is quite important since since the basic mechanisms within the air conditioners being the same, there are still a few differences which set the different models of air conditioners apart. In order to ensure that your unit is fixed successfully, you must find the right person and avoid those who are unqualified and is out to make a quick buck.

Yet another thing to keep in mind is that the Better Business Bureaus is an efficient source which provides information about the companies you may consider seeking help from. Always ensure that you find a person who is well qualified and has the necessary hands on training as well as experience to ensure that the heating / cooling problems you are facing will be fixed and your home will be made comfortable in a short while.

Also, you must remember that a good time to handle any air conditioner heating repair issues is before the afternoon of summer to ensure that you are well prepared to face summer head on.

The Right Way To Iron A Dress Shirt

What's the most elegant and sophisticated type of apparel worn by men? If you did, then your answer is absolutely correct! Designer dress shirts are indeed one of the best things that a man can wear in order to exhibit style and elegance.

Now you are well aware of the fact that designer dress shirts are not cheap by any stretch of the imagination. They usually come with a pretty hefty price tag; however its premium fabric quality justifies the price. So considering its superior value, you'll want to make sure you handle your dress shirts with the utmost care, so that they last for a relatively long time.

On that note, ironing is an important, yet dangerous (in case of negligence) process. Everyone has to iron the shirt prior to wearing it, pretty obvious is not it? But unfortunately not many know the proper way of ironing a dress shirt, which typically detracts from its appearance. That is why, it's vital to iron your shirt correctly, so as to give a neat and spectacular look, while getting your money's worth.

Here is a step-by-step guide to facilitate you in ironing your dress shirt properly:

Step 1

First and foremost, you'll have to unbutton the dress shirt and then lay in on the ironing board. Start off the ironing process with the collar. Open up the collar completely and iron off the wrinkles using the front part (narrow one) of the iron. Keep in mind that every shirt is stitched differently. That is why you have to adjust the direction in which you move the iron accordingly, so it does not leave any crease on the collar. Now turn the shirt and iron the other side as well (this is optional if you use a stream iron).

Step 2

Once you have finished lighting the collar, move to the cuffs. If the cufflinks are still on, take them off prior to ironing. Thereafter, lay the cuffs flat on the board and iron out the wrinkles using the front part of the iron (just like you did previously). Make sure you press the cuff carefully, especially when moving around its buttons. Once you're done with one cuff, move to the second one and repeat the process.

Step 3

Now it's time to press the yoke, which is far the most difficult part. This is basically the area of ​​the dress shirt which originates from the bottom of the collar and extends to the sides of the shoulder (where your trap muscles are). The bigger the yoke, the more effort you'll have to put in to iron it well. That being said, most dress shirts come with a normal-sized yoke.

The key to ironing the yoke well is to lay it completely flat on the board. This may vary according to the size and shape of the shirt. An excellent tip is to iron it in two separate stages. You can first align and press the shoulder end (of the yoke) followed with the other end. As said earlier, use the front portion of the iron to clear out noticeable wrinkles.

Step 4

This step involves lining the sleeves. Prior to ironing the sleeve, take a moment to align it evenly over the board. After aligning it, lay it flat on the board, with the button-side of the cuff is at the top. Now start pressing the sleeve smoothly from top to bottom, keeping the seam as a guideline. Once you are done with one side, flip the sleeve over and press through the other side. You'll apply the same technique for the other sleeve as well.

Step 5

After both the sleeves are done, you'll now move to the front of the shirt. Begin by placing the front side flat on the board. The left side will be fairly simple to iron because it does not have any button on it. All you need to do is iron smoothly through it. Subsequently, place the right side of the shirt on the board and iron with smooth movements. For the area near the buttons, use the same front-tip tactic. Since, this is one of most prominent parts (the second being the collar) of the shirt, pay close attention to it.

Step 6

Last but not the least, you have to iron the rear side of the shirt. This is probably the easiest of all steps, hence, that is why you should do it last. Place the rear side of the shirt on the ironing board, with the collar hanging over the narrow end. Once the shirt is in place, starting ironing it making smooth movements until it appears completely flat.

And then ends the ironing process! Now just take a hanger and hang the shirt on it so that it does not get crumpled when in the wardrobe. This way, when you take it out to wear it, it will be in intolerable condition.

Photography Light Positioning – Short Lighting

Short lighting by definition is when the key light is placed to the right of camera and the subject faces camera right toward the light. This lets light fall on the narrow side of the face leaving a shadow on the broad side of the face, which is facing the camera. The actual position of the light or lights will depend on the style and mood of the portrait anticipated.

The positioning of lights when shooting portrait photographs is by no means an exact science. There are many variables which affect the final outcome. These include: the models facial features, the exact position of the head, the position of the camera and the position of the lights.

Positioning of the light in relation to the subject and camera

Starting point

Start by placing the subject in the center of an imaginary circle. Place the light and the camera on the circle perimeter so that a minimum degree angle is formed when you draw a line from the camera to the subject and from the subject to the light. At all times the subject, light and camera remain within one quadrant of the circle. Set both the light and the camera to the subject's eye level. When the subject faces the camera directly you will have half the face lit and the other half in shadow. In effect this is side lighting.

Short lighting

When the set-up has been achieved, ask the subject to turn his or her head to camera right, or subject left, which exposes the broad side of the face to the camera and the narrow side of the face to the light. This is how the term short lighting is derived (the short side of the face is closer to the key light). This exercise is best done with a constant light. This can be your studio flash's model light or a light similar to a redhead (used in television). This will allow you to see the effect of the light position on your subject immediately. Using a flash only will mean lots of trial and error, which is often time consuming.

How does short lighting affect the portrait?

  • The face appears slim when the shadow is on the broad side
  • Adds character to portraits
  • Suits masculine portraits through exploitation of texture

The effect of short lighting technique will depend on:

  • The facial features of your subject
  • The horizontal angle of the light
  • The vertical angle of the light (how high or low the light is in relation to the subject)
  • The exact position of the face (especially for Rembrandt lighting where the nose shadow must meet the shadow on the broad side of the face to create the famous Rembrandt Triangle)
  • The distance of the light from the subject
  • The quality (hard, soft)
  • The amount of fill
  • The position of the fill

Pay attention to each shot

Short light requires careful attention to detail when shooting portraits. It is easy to change the lighting mode to broad lighting by accidentally moving the key light in relation to the subject, but even more so, by the subject subtly changing positions. It only takes a small movement in the wrong direction to affect the desired outcome.

Short lighting must be compared to other lighting techniques

Exposing the key light to the narrow side of the face is one of many lighting techniques which should also be studied. These include:

  • Rembrandt
  • Butterfly
  • Beauty
  • Broad
  • High key
  • Low key

This will help you make the best choice for your particular portrait needs.

Dental Bridges – Which Among The Different Types Is Right For You?

Hiding your smile because of the discomfort caused by your missing tooth? These days there are dental restoration processes that can make your smiles look flawless. Dental bridges are meant to correct dental issues such as tooth replacement. Virtually indistinguishable from natural teeth, they offer both aesthetic and functional benefits.

The type of dental bridges applied by dental clinics depends on the unique requirements of the patient. Before choosing which type is best for you, your dentist will check the issue that the restoration process needs to address. Your comfort and convenience as well is considered.

Dental bridges are distinguished from each other through these two factors:

  • The dental issue they are meant to correct
  • The technology or method of application

The different types of dental bridges

First is the traditional dental bridge. This dental restoration uses two crowns which are placed on top of your adjacent teeth. Your dentist needs to reshape nearby teeth to make sure that there is sufficient space to attach the crowns.

Next is the cantilever bridge. As opposed to the traditional type, this uses a single crown to support the entire restoration. Usually this is not advisable to use on your back teeth as your molars have the most pressure when you bite. This bridge can easily collapse and it would just be a waste of money if it gets damaged. This bridge is still present as option for patients who want to preserve the original structure of their tooth. However, it is no longer recommended by most dentists.

Third is the bonded bridge. Minimal alteration of your surrounding teeth is involved here. But there are two small wings that will be attached to your adjacent teeth. To apply this type, your dentist has to create a durable bond for the restoration and micro-etch the two supporting teeth. Usually this is used to replace a single missing tooth. But in some cases, it can support up to three teeth.

Fourth is the removable bridge. While most bridges are permanently applied, this type can be removed just like dentures. Some special patients prefer this to address their oral health issues.

The last type is the implant bridge. This type is the most common alternative these days. With an abutment piece, dental implants are permanent and more durable. Your dentist will screw a titanium piece directly into your jawbone and this implant will secure a fabricated new tooth. This dental restoration process is much longer and not everyone who desires to have it qualifies to undergo this type of dental bridges.

Mosaic Tile Bathroom – The True Facts You Need to Know!

Mosaic Tile Bathroom is an excellent way to bring nature into your home design. These nature-made panels are at the forefront of fashion, and how better to complete that contemporary look by mixing the modernity of your home's interior / exterior with the classic elegance of natural stone. The following review will show you how you can easily use these unique nature-made panels.

Short overview

Mosaic Tile Bathroom is about gathering seamless beach-stones that are mounted onto a standard size mesh backing. Ever wondered about the origin of these unique stones? Well, you'll probably be surprised to find out that most of them are originated from the SE Asian seashores. The most common applications with this tiling method include the following: Bathrooms, bathrooms and showers – walls, flooring, counters, and backsplashes.

Quick benefits and advantages

Using this simple tiling solution definitely brings various redecoration advantages:

* Available in various colors and shapes that can easily fit almost any surface and room setting.

* Easily installed over existing surfaces such as old ceramics or plain concrete.

* Durable to most common home detergents.

Important advices!

* Use only high quality materials such as grout and sealer – you do not want your tiles to fall apart after few months just because you wanted to save a few dollars.

* In order to maintain these natural stones properly, it is recommended to apply sealants every two to three years.

* Measure the designated area first, and then add 5% -7% more to your order just as a backup for future use and in case you may need to repair or cut small tile pieces in order to tile small / narrow spaces.

Bottom line

Mosaic Tile Bathroom remodeling can easily turn any plain area whether in the inside or in the outside into a beautiful living space. It will not be that difficult to find other great benefits provided by this effortless home improvement option, simply because any average and unprofessional home-maker can do it easily by him / herself. For a smooth and successful installation it is recommended to bear in mind the above tips once you decide on installing these stone tiles.

Wiggler – Control Your Own Spacecraft!

Do you enjoy space adventures and controlling diverse vehicles in unusual environments? Wiggler is a free arcade game where the task is to control your own spacecraft traveling around space ports.

Your vehicle appears out of a portal and the main goal is to search for the space key, grab it and come back to the portal using as less time as possible. Regardless of the time you spend for completing the level you get awarded with points afterward. But the faster you manage to do it, the more chances you have to obtain also bonus points to use them for diversity upgrades. The strength and capacities of your spacecraft depend on its rotation and maximum speed, acceleration, the quality of shield and the possibilities of its self-repair.

On the way to the "space key" you will encounter plenty of walls that create obstacles in this free online game. Make sure you do not hit the walls otherwise your shield gets damaged. If they're too many accidents on the way and your shield becomes fragile, the spacecraft gets smashed and blown up. Try not to bump your spacecraft too much.

Sometimes the whole image of location is disclosed only after your start traveling. Your moves should be smooth and accurate enough in order not to damage the vehicle but at the same time fast enough to be able to win the points, just like when you park your car on a busy street!

Both the graphics and animation are not that impressive but this is free arcade game offers the players a nice set of different tasks aimed at training your abilities of accuracy in moving the objects.

Why Would You Seek Breast Augmentation And Who Can Offer The Service?

Breast augmentation is a very delicate procedure that can only be handled by a highly qualified medical practitioner. Basically, the procedure involves placement of a synthetic implant under the breast tissue. Alternatively, such an implant can also be placed beneath the chest muscle.

You may wonder whether an artificial implant can actually have the feel and look of a normal breast. Well, in any properly done augmentation procedure, no one may even suspect that you have an artificial implant, since it would look and feel exactly the same as your natural breast. This is so because the implant is filled with salt water or silicone gel, which is malleable just like normal breast tissue.

Why Would Anyone Go for Such an Augmentation Procedure?

If you haven’t already known, there are already a significant number of people who have gone through cosmetic surgery, including augmentation procedures of the breasts. Actually, 66 Australians out of every 100,000 have gone through cosmetic surgery procedures.

Based on such statistics, it’s clear that quite a number of people have found cosmetic surgery to be useful in their lives. Augmentation procedures for the breasts, in particular, have various beneficial aspects, as indicated by the Australian Society of Plastic Surgeons:

1. One key beneficial aspect is in improving the physical appearance of your body. Women can especially benefit from this, in a bid to achieve that uniquely feminine shape that they so desire.

2. The procedure can also be useful in correcting a disproportionate look of the breasts. In such instances, you may have one breast appearing smaller than the other, hence would want to increase its size to appear similar to the other.

3. Just a little bit of augmentation may be needed in order to enhance the look of your breasts. This is in situations in which you may have a drooping breast.

4. Such major incidences as rapid weight loss, nursing or pregnancy can affect the look of your breasts. Fortunately, an augmentation procedure can help correct the situation and give you back that good-looking appearance.

5. Overall, many of such aforementioned benefits would eventually help boost your self-esteem. You are bound to feel more confident once you know that you have a very appealing physical appearance.

Who can Offer the Best Service?

In order to get the best augmentation procedure, you must ensure that you seek the services of a qualified professional. Apart from considering the experience of the surgeon, such a medical professional needs to have some minimum level of medical training.

You would know that your choice surgeon has achieved the requisite minimum level of medical training, if he/ she possesses certification by the Australian Medical Council, as well as the Australian Health Practitioner Regulation Agency (AHPRA). Such certification can only be awarded to medical professionals who have acquired the best possible medical training.

A competent surgeon would also have membership in the Royal Australasian College of Surgeons (RACS) and the Australian Society of Plastic Surgeons, which are renowned health practitioner associations. Such a surgeon would constantly deliver top-notch service, as well as being accountable to other equally qualified medical professionals.

Auto Body Customer Satisfaction

When the 2010 AutocheX Premier Achiever Awards for outstanding customer service were handed out earlier this year, the spotlight was placed on auto body shops. A third-party company that specializes in tracking customer service levels for auto body shops across the continent, AutocheX measured the customer service satisfaction ratings of approximately 9,000 auto body repair shops across the country.

Held at the Mandalay Bay Convention Center in Las Vegas on October 12, 2010, the awards ceremony “honored collision repair facilities that have achieved exceptional customer satisfaction ratings” and that “use the AutocheX service for customer satisfaction.”

From the new customer’s perspective, having such a recognition associated with the auto body shop s/he is entrusting her/his vehicle with provides some peace of mind of course, but it’s not essential. Many shops that don’t take part in the ranking service provide superior customer service as well. And all it takes is a little investigative work on the part of the consumer to uncover whether a particular shop is going to meet and even exceed expectations.

Here are some clues to watch out for that indicate an auto body shop makes customer satisfaction a top priority.

  1. Does your auto body shop partner with a leading rental car company to swiftly get you into a backup vehicle while your automobile is being repaired?
  2. Does your shop have an industry leading warranty? Selecting a collision repair service that possesses one is probably the most important thing you can keep in mind when it comes to vehicle repair.
  3. Does your shop guide you through the entire repair process? You shouldn’t have to babysit your repair service professionals to ensure the job is done to your specifications. You want a repair shop that’s offers you the peace of mind of knowing that you can just hand over your keys and trust that the pros will take care of everything else. The best way to find such a body shop is through local word of mouth. A quality auto body shop’s reputation always precedes it.
  4. Does your shop hold certification from a reputable outside source that raises the quality, safety and efficiency of auto collision repair for the ultimate benefit of you, the consumer? AutocheX is just one. I-Car is another, and it’s the highest in the industry. An international not-for-profit organization, I-Car gathers information about collision repair from the major manufacturers, from collision businesses across the country, from insurance companies, and from makers and suppliers of tools, equipment and materials used to repair vehicles.
  5. Does your shop make it a mission every day to get you back on the road quickly and with the confidence that your vehicle has been restored to your complete satisfaction?
  6. Is your auto body shop staffed with a team of certified auto body repair technicians?
  7. Does your auto body repair shop pledge to use only original equipment manufacturer (OEM) parts and certified alternative components and swear of knock-offs or cheap imitations?

How to Build a Base Template File With Guidelines for a Future Club Flyer Printing Design Project

The problem

Have you, as a consumer, ever wondered… why does my design get rejected every time I place an order? This is very common question, and it’s most often because software and applications like Microsoft Word, PowerPoint, Paint, and more, are allowing consumers to build simple designs as a means to an end to create a business card, poster or other printing project. However, these programs are very simple tools that allow you to create nothing more than a sketch for your design. Photoshop, Illustrator, and other professional design software allow for a more complete and refined result.

Remember that getting a file rejected by the printer will result in a longer turnaround time for your order to get printed. In addition, printers may even charge additional fees to get your file into ready-to-print conditions.

Avoiding Printing Issues

There are many ways to avoid getting your files rejected by the printer. The first is to hire a designer- a professional who has experience designing for printers. Generally party flyer designers have the most competitive prices, as they manage hundreds of club flyer designs per week.

Another choice would be getting a pre-designed template with the guidelines included from the printer, and laying out your design on top of the template file.

Last but not least, many printers are now acquiring an online design studio tool that will allow you to seamlessly design your business card, flyer or brochure during the checkout process with quality results. These online studios are often very easy to use and as user-friendly as programs such as Word, PowerPoint, or other software you may have used in the past.

What is a template?

A template is considered a pre-designed file which contains a preset format, and which works as a base for a future design. These template files are usually provided by the actual printer, and it should include the printer’s exact settings and requirements. Still, there are very basic rules that will be compatible with any printer in the market, and that is what I will show you how to build from scratch.

Building a template for yourself

One of the most challenging elements of the process of getting a printed product to your door is how to get started. Here, I will teach you how to create a basic 4″x6″ (generic postcard flyer size) template from scratch. A flyer is much simpler than a brochure because it doesn’t fold, and with a flyer you only have to design the front and back, whereas with a brochure with folds, there are four or more faces to create.

1st step, creating a new image (with bleed)

Open Photoshop, click “File” (on the top left corner), and then click “New”. A settings window will open and you will introduce the values and settings for the new file. this is essentially the most important part of the whole process.

Type a custom “name” for your new image. Then, under “preset” select “custom”. For the “width” option, select “inches” first, then enter the width of the flyer. In this example, it will be 4″ tall 6″ width flyer, but you want to type in 6.25″ for width and 4.25″ height, for bleeding purposes (the space left for when the flyer is trimmed). for resolution, you should aim for larger and better quality-building your design over 300 DPI in pixels is recommended. 350 DPI is ideal. For the “Color Mode”, select CMYK, and click OK.

The bleed: An extra margin specially designed for the space left after the cutting edge. It gives your design a much better finish and it allows the printer to play a bit with the precision of the cut, without harming the look of the printed unit. If a white border is left for a business card, and the cutter or paper moves even slightly, it becomes very noticeable. With a full bleed business card, you extend your graphics and background beyond the cutting line. This gives a safer margin and a better look for your flyer.

CMYK: An acronym for Cyan, Magenta, Yellow and Black. This is the process used to separate an image into 4 different colors for the printing plates used by an offset printing machine. For your screen display it’s always best to choose RGB, but if you want to have something that looks closer to the realized design, use CMYK. That will help you figure out how colors will look on the finished piece.

2nd step, marking cutting edges

Create a 4″x6″ box that will act as our measurement margin guide, and center it in the middle of the design with the alignment tool. After you’ve created the box with the exact measurements, center it by selecting the box first, then clicking the “Selection” tool and selecting the whole working area of the image. Next, go to “Layer”, “Align Layers to Selection”, and then “Horizontal Centers” and “Vertical Centers”. Your box should now be in the center of the image leaving a border of your background color around the box.

Make sure you have the ruler active so that you can drag lines into your working area. Drag lines from the top ruler to the top and bottom borders of the box we created earlier. Drag two lines from the left ruler for the left and right borders of the box as well.

3rd step, safe area

Now you’ve gotten to the step where you need to create borders that will allow space for the printer to trim the edges of your poster. Remember to always allow extra space on the edges so that your text and content doesn’t get trimmed. For this step, select the box one more time, decrease the box size to 3.75″x5.75″, and center it again. Then re-do the ruler line for each side of the box.

Remember that all text should be inside of the content area, and maintain an additional margin from the marked ruler lines.

New Stitch and Glue Tug Boat You Can Build

The new “Tug Along” is the latest stitch and glue plywood design that you can build yourself whether you are a first time boat builder or seasoned professional. The Tug Along can be built in 16′ or 18′ lengths, both with a 7′ 9″ beam. This is a simple, practical yacht that will turn heads whether on the water or perched on a trailer.

The flat bottom hull provides excellent stability and won’t rock when someone moves. The nice large high windowed cabin and 6′ 6″ of headroom makes this small boat seem unusually spacious. This is a great boat to enjoy in quiet water bays, lakes and rivers.

The Tug Along is designed for an outboard motor up to about 15 horsepower which can be concealed under the decks and runs in a partial tunnel. Sleeping accommodations are spacious with berths extending to 5′ 6″ by 6′ 3″. Room is also provided for a small galley with a stove and sink as well as a portable head, storage and helm station.

Full size dimensional layouts are provided for virtually every part of the boat which are easily laid out onto wood, cut and assembled. Also included are extensive written instructions and a Stitch and Glue Manual.

The Tug Along is designed with the first time builder in mind, but seasoned builders are sure to enjoy this straight-forward, fun project.

TUG ALONG CHARACTERISTICS

Length overall: 15′ 10″ or 18′

Beam: 7′ 9″

Hull depth midship: 41″

Hull weight (approx): 450 lbs. or 525 lbs.

Overall height: 7′ 7″

Cabin headroom: 6′ 6″

Water capacity: 6 gals.

Holding tank (gray water): 6 gals.

Fuel capacity: 11 gals.

Hull type: Flat bottom, developed for sheet plywood with rounded stern. For standard sized plywood assembled by the Stitch and Glue construction method.

Power: Outboard motors to 15 hp.

When Is It Time to Switch to Pro Rodeo?

Now that its 2011, we all have had a while off to reflect on the past year and look hard into the future. Deciding what memberships to apply for and what associations to compete in may change, horses may change, and equipment may also change. Most important of all though we change and grow physically and mentally. All of these changes add up to change our desires and goals. The decision as to where you will compete is something you must think of at some point every year. The decision regarding what associations you compete in can be a matter of whether or not you want to travel so much this year compared to last year or maybe that you want to challenge yourself further. It can also involve the decision as to whether or not you want to go to pro.

In rodeo there is no real written rulebook or set of guidelines that tell you when you need to or should turn pro. In other professional sports they have to be chosen. In our sport you have to do it yourself. If you want to get to the higher levels then you must improve yourself and go to the places where you can challenge yourself and continuously grow and heighten your skill level. At any time you can change your mind and pursue something else. You can be the best in the world and decide to retire. Justin McBride did exactly that the year after he won the PBR World Championship in 2007. I think this is what makes our sport so unique. There are no guaranteed pay days, and no it all depends on you and only you. If you put the time and effort into it to make yourself the best you can be and consistently make the best rides and runs you will succeed.

There are people who may go before they are ready at times and sometimes people may wait too long before they make the step up. What I think most of us do is judge others without actually knowing their circumstances or values. When people do not know others values ​​they make false assumptions of what they think is happening. For the rough stock side of things it really is a lot easier to make the decision because the only thing it comes down to is you. For the timed events it can be a matter of if your horse is ready too or if you are willing to pay mount money wherever you go.

For us rough stock competitors I believe the real question is not whether or not you have the ability to go pro or not. A deer look tells a different story. It's a matter of your values ​​and what you really want to do. If your main goal is to make money riding then the odds are stacked highly against you. When listening to any of the top rodeo athletes in the Canadian Rodeo News or the Professional Bull Riders Tour on TV or anywhere else for that matter you do not hear them saying they rodeo to get rich or make a lot of money.

Their reasons to rodeo are more of those of prestige, such as being a World or Canadian Champion, or being the best there has ever been. I know for myself I have won the most money when my only thought was winning first every single time I nodded my head. Some people care more about money so it is what they focus on. Some people value their friendships and the good times higher than anything else. Others care more about doing something they love and not having to work a 9 to 5 job during the week, so they will do everything in their ability to not have that happen. They may go to the lengths of even taking a lower paying and much rougher job to achieve their desired experiences. So it basically is all about what makes you the most happy. If you want to go to Pro Rodeos but you do not make any money you might feel better winning at a lower level. If you want the prestige of qualifying for the Canadian Finals then you will do everything in your power to make it, even if it takes a long time. Finally making it will make it a worthwhile. If these different things are your true desire then there is really nothing stopping you. What would you consider rodeo to yourself? Is it something you do on the weekends with your friends? Is it something that you do because you love it and it's all you really know?

If you feel that you are ready and think you can compete and achieve the goals you have set out for yourself then there is no reason to let anyone else tell you that you can not do it. It is just a matter of what your core beliefs and values ​​are and what you really want to do with your life. The only person you absolutely have to live with at the end of the day is yourself. The decisions you make shape your destiny.

One of the best things with rodeo is that you have the opportunity to go almost anywhere and do almost anything you want to do in the sport. You can be a World or Canadian Champion. You can ride and win at the Calgary Stampede or be a Champion at any other level. All you have to do is take yourself there. If you want to do it then you can. If you win and try the hardest your chances get better and better. Most of all because do what you want to do. Listen to the voice inside you that tells you your deepest desires.

"Only those who will risk going too far can possibly find out how far one can go."

TS Elliot

Kitchen Tools and Their Uses

A kitchen tool can be defined as a small tool that can be held in the hands of the user and can be used effectively in the kitchen. It is used for food- related functions. On the other hand a cooking utensil can be defined as a tool that is used in the kitchen for the purpose of cooking. These kitchen tools are given their names based on the material that is used in their making. For example, tools that are made of clay are called earthenware, tools that are made of silver are called silverware, tools that are made of glass are called glassware and henceforth.

The most common materials that are used for the making of kitchen tools are copper, iron, earthenware and enamelware and also aluminum.

Copper

Copper consists of good thermal conductivity and this makes the copper tools very durable and attractive as well. They are however quite heavier than other types of materials and require a lot of cleaning to remove the old content.

Iron

Iron can be comparatively more prone to rusting. However the cast iron tools of kitchens are less prone to rusting. These tools can simply be washed with water and then dried with the help of a cloth. When you are storing any iron kitchen tool for a long period of time, you can simply coat them in a non-salted paraffin or fat.

Earthenware and enamelware

The earthenware kitchen tools or utensils are sometimes prone to brittleness when they are subjected to a large change in the temperature of their environment. This mostly occurs in cooking.

Aluminum

Aluminum has often been described as the best material that can be used in kitchen tools. It is by far superior to the other types of materials that are commonly used. This is because it has an extraordinary feature of good thermal conductivity which makes it non- reactive to a lot of food stuffs at high as well as low temperatures. However it has a disadvantage that it can be dis colored when it contains any type of acidic food.

Kitchen tools are extremely important for the functioning of the kitchen. You must purchase the best tools which you feel are the most appropriate for your use. These kitchen tools and utensils will help you to run your kitchen in an organized as well as in a comfortable manner. It is one of the important things to remember.

Improve Your Outdoor Lighting

The design trend that puts landscape lights into the spotlight is continuously increasing in popularity. It is not only used for aesthetic purposes but also it is an essential tool to increase the value of a real estate property, and to prevent vandalism and even nighttime theft.

Having sufficient lighting outdoors will not only show off the beauty of your property but it will allow you to go out and enjoy your garden, lawn, or backyard even after the sun has already set. This is very practical and convenient especially in times of summer. Even at night, you and your family can enjoy the cool breeze outside when you have landscape lighting installed. It is also cost effective as you do not have to open a fan or the air conditioner.

There is no doubt about it, landscaping definitely increases the value of a property because it is one of the first things that buyers see from the outside. As we all know, first impressions last. This is why a lot of people are willing to spend thousands of dollars in order to create the garden they envision. However, they tend to overlook the importance of lighting in their presentation. Light has magical qualities. It can highlight the best part of the garden while hiding its imperfections. This means better returns on your actual investments.

With the real estate market so much slower and homes staying on the market longer, everything that can be done to a home to impress a potential buyer is essential. Outdoor lighting does not have to be too expensive and can have a dramatic effect on the curb appeal of your home. As a DIY project, you can save money, while showing off your home in a way that buyers will be falling over themselves to make an offer.