Real Wood Moldings Add Subtitle Beauty to Your Home

You can add subtle beauty to a door, window or room easily with decorative wood moldings. Moldings (also called moldings and trim) are pieces of materials with an ornamental or decorative cross-section profile. Profiles are composed of surfaces that are convex and concave, with planes and angles mixed in. These various surfaces yield different appearances from the way light is reflected off of them. They can be stained or painted to compliment or contrast adjacent surfaces. Moldings are formed from wood, composite lumber, plaster, plastic, rigid foam, medium density fiber-board (MDF), and even masonry materials.

The most readily available and least expensive mouldings are shaped from wood and wood fibers. The wood can come from softwood (coniferous) trees, such as fir, spruce, and pine, or from hardwood (deciduous) trees such as poplar, maple, and cherry. The more expensive mouldings are made from hardwoods and are usually reserved for furniture and cabinets.These moldings are more often stained rather than painted. Moldings made from medium density fiber-board (MDF) are less expensive. MDF is made from wood fibers combined with resins and placed under pressure to form material that can easily be shaped with common tools. It is important that MDF moldings should not be used where moisture problems might be present, such as in a bathroom or near a basement floor. "Finger jointed" moldings are a slightly more expensive alternative to MDF. "Finger jointed" mouldings are made from short pieces of wood that have been machined on the ends with a pattern that resembles interlaced fingers, end-glued together, then ran through a molding machine to create the finished profile. Finger joints can be seen if they are stained, so painting is clearly the best finishing option. Moldings serve many purposes. They are primarily used to make a continuous, attractive transition where different surface materials or angles meet. Moldings are considered very decorative and using them can add unique aspects to a rooms, doors, windows and mantles. They can also be used to cover or hide problem areas, and to protect softer surfaces.

Moldings are available in thousands of profiles, yet they can be classified into only a few groups, depending upon where they are used in a room: floors, doors, walls, windows and ceilings. Base moldings are usually found at the "base" of a wall where it meets the floor. Base caps sit on top of a square board, and gives the combination a more graceful look. Shoe molds are used where the base board and floor meet, helping to protect the base board and covering any unsightly gaps left between the floor and base board. Chair rails are typically applied to the wall, at about the height of a chair back's top. Although chair rails are commonly used for decoration, they got their name from protecting walls from being damaged when chairs were slid back. Chair rails can also be used to finished the tops of wainscoting, a type of paneling that covers the bottom three to four feet of a wall. Windows and doors can really stand out when they are "framed" with casing molding. Window stool can be added to the bottom of a window, and aprons underneath the stool really complete the effect. Picture molding is typically applied a few inches below the top of a wall, and got its name from when people used to hang pictures from it using picture wire and hooks. This was the best way to display pictures in older homes with plaster walls, where it was impractical to use nails. Ceiling mouldings are generally placed at the top of a wall, where the wall and ceiling meet. The mouldings you will most often find here are the crown mouldings. Crown mouldings are always "sprung", meaning that the back edges are beveled so that they may be placed where non-parallel surfaces meet. They are used to cover large angles.

There are literally hundreds of different patterns of crown, and the combinations are virtually limitless. Base boards and aprons can be used behind the top and bottom of a molded crown to make it look more massive and extend its coverage. Crowns can be "built up" from multiple patterns, and other types of molding can be added for different effects.

Moldings can be used on the exterior of homes and structures, as well as the interior. Rake moldings are used where roofs have a slant or "rake". Shingle moldings are placed below the edges of shingle roofs, creating a more pleasing visual appearance than flat boards, and helping to support the shingles that extend past the roof decking. Bed moldings are narrow, sprung or flat moldings with the same purpose as crowns. Brick moldings are used as an exterior casing for windows and doors. It is a thick, blocky molding that provides a surface for brick or other exterior veneers, such as siding, to join against. Drip caps have an angled profile that allows the molding to sit on top of a window or door casing, and carry water to the outside. It usually has a small cove on the bottom to keep water from running back toward the structure. Today, most people prefer a non-rot material for exterior moldings. PVC (polyvinyl chloride), fiber cement or composite wood made from recycled plastic and wood fibers are the materials most often preferred, because of their low maintenance and reasonable cost.

Whatever your structural project might be, moldings can be used to enhance the look of windows, doors and walls. They can be used to cover any space where building materials and lumber products do not meet completely, and they provide a uniform look where unsightly cracks might have been. Visually pleasing transitions can be formed where different angles meet and with a little thought and effort, and some inexpensive tools, moldings can add a truly beautiful look to any new construction or home improvement project.

Knee Boarding Tips For Beginners – Deep Water Starts

Being new to the sport of kneeboarding it’s really hard to start off especially if you are a beginner. As an introduction to ‘boat-towed’ sport, a kneeboard is a great piece of equipment to practice with. The low center of gravity often makes it easier to get up on than a water ski or wakeboard, which both require standing up.

Here are two ways to do a deepwater kneeboard start, the belly start and the low buoyancy start.

The Belly Start

o The most common kneeboard start is the belly start or abdomen start. In performing this, you should put down your belly on the board with the strap laying forward and pointing towards the nose of the board.

o The nose of the board should be sticking out of the water. Place your one hand on the side of the board and the other hand grasping the rope and on holding the other side of the board.

o As the boat starts moving pull your knees ahead into the padded knee wells on the board. And as you do this, try not to bend forward, and keep your weight back.

o When you feel balanced, let go of the rope with your one hand, and with the other hand pull the strap up over your knees and tighten the strap to where it feels secure. Keep your arms extended and slightly bent.

The Low Buoyancy Start

o A low buoyancy kneeboard is one that is very thin, and while you are waiting in the water it will sink slightly into the water when you put your body weight to it. This allows you to go ahead to fasten yourself into the board before the boat pulls you up.

o It is easier if you adjust the strap to your preferred fit before you get into the water. This can be done on the swim platform or on a flat spot in the boat. You just simply get on the board and adjust the length to where it slides comfortably over you knees.

o After the strap is adjusted, jump in the water with the board. Apply weight to the board by pressing down with your elbows, and with your hands on the board in the same position as described in the belly start, pull your knees up on the board and below the strap.

o This start requires less effort when the boat is pulling you out of the water and also it requires a lot of balance before the boat starts moving. You need to balance yourself to keep the board from flipping over while you are strapped in it as you wait to be pulled out of the water. Balancing in the knee board can be best achieved by moving your arms back and forth in the water as if you were treading water.

o You should remain in that position; keep your balance with the nose of the board pointing slightly out of the water. As the boat starts moving bend back and you should pop out of the water with ease. This is the time to tighten the strap if needed. Keep your arms extended and slightly bent.

Do Your Homework When Buying Kitchen Appliances

If you are remodeling your kitchen, then chances are you are planning to buy new kitchen appliances. These new appliances will accent the room and fill the needs of the family. You can look at outlet stores as well as appliance stores to find all matching appliances in one area. With all the different colors, sizes, manufacturers and types of kitchen appliances needs, you have many selections to choose from when shopping. This means you will have to do your homework and make your selections well.

Major Appliances

The kitchen always needs a refrigerator and a range, and you want them to match each other. When looking for these major kitchen appliances, you have to decide between built-in and a freestanding model. Think about which refrigerator model suits your design better. The stove likewise could be a counter top stove with a built-in oven somewhere more convenient, or a freestanding traditional range with oven under a 4 or 6 burner cook top. Definitely go for a built-in stove if you want the convenience of two ovens.

The dishwasher and trash compactor are considered major kitchen appliances as well. You can have these match the refrigerator and stove for an overall uniform color scheme. Both the compactor and the dishwasher fit under the counter top, however, they both come as freestanding models as well.

Kitchen Appliance Combination Packages

Shopping around for the best price from different manufacturers on individual appliances is a good idea, but when you buy a kitchen appliance combination package the value is usually much better. A combination package will include dishwasher, microwave, stove, oven and refrigerator. They will all match and be the same brand and style. This way the appliances will integrate very well into your new kitchen. This is the best deal when purchasing kitchen appliances, but be sure that the kitchen appliances that you are getting are quality, reliable products, and you are not getting stuck with what is left in the warehouse.

Compare Kitchen Appliance Options

It is really worth the time and effort to compare kitchen appliance options. One of the most obvious reasons that you should take this time is because you will be able to get the best quality and price.

The first thing to check out is the quality. After all, if the product is poorly made then it really does not matter how much you are saving, because you will end up paying more when you have to make repeated repairs or buy the appliance again.

Do a brief background check on the manufacturer. See how long they have been in business, and research online whenever they regularly have complaints. You can ask around among friends and coworkers for input as well.

Reading kitchen appliance reviews is the best place to start before making large investments. There are different types and sources of kitchen appliance reviews that will offer a big picture. Many sites offer expert kitchen appliance reviews, which look at most products from a technical point of view. They can provide insight to the potential for repairs needed, and how easy it is to find a service center, and what it will take to install and use the product.

Other sites provide reviews and opinions posted by users of the product. Consumer based appliance reviews are sometimes not completely objective, as people will interject their disappointment in the product into the review. For example, in looking at a review for a particular item, if the unit received great reviews on operation, ease of use, performing as promised, and the company's response to problems, then take with a grain of salt the reviewer who absolutely hates it . When looking at kitchen appliance reviews it pays to look at more than one website.

An important consideration in comparison shopping is the Energy Star rating. This gives you a rough idea how much the appliance will cost to run. Some kitchen appliances have many wonderful features that may use a lot more gas or electricity. Evaluate the cost of use with the price of the appliance. When looking at Energy Star ratings, be sure to compare apples to apples, that is, make sure the unit of measure you are comparing on two different units is the same.

Armed with your information on manufacturers and styles, the last step is to make a list of the different stores in your area that offer the particular kitchen appliance you are looking for. Compare the suggested retail prices given by the different stores, and take note of which is the lowest.

Kitchen Appliance Colors

In the 1960s the latest in kitchen appliance trends turned its back on classic white appliances, adding such colors as avocado and sunburst orange and yellow. These days the range of colors and textures for these appliances are endless. You have your choice of black, white, off-white, red, navy, stainless, and black glass. Not to mention expensive, custom color choices.

Stainless steel is now one of the most popular finishes for appliances. Many people appreciate the aesthetic appeal of a stainless steel kitchen appliances as well as their ease in keeping clean. Not only do they reject fingerprints, but they fit in better with any kitchen color scheme.

How-To Get Started With Organic Gardening

How-To Basics of getting started with Organic Gardening.
No matter whether you are an experienced organic gardener or you have simply decided that you would like to become more self-reliant by growing some of your own food, planting a garden requires planning. A properly planned and planted organic garden will naturally resist disease, deter pests, and be healthy and productive. With the spring planting season fast approaching, winter is the ideal time to get started.

Set Goals
What do you want to do with your plot of earth this season? Begin planning by setting goals. Grab your garden map, a pencil, your garden guide, catalogs, and your thinking cap. List the areas of your yard and garden separately (ie lawn, vegetable patch, flower garden), and, keeping in mind the size and conditions of your site, brainstorm! Are you planning a garden for the first time? Do you want to expand your existing garden? Did you have pest or disease problems last year that you're trying to prevent this year? What map? To create a map of your yard or garden, measure the dimensions of your site as a whole, and then the individual dimensions of your vegetable patch, flowerbeds, and lawn. It's easiest to draw your map to scale on a sheet of graph paper. These measurements will be necessary later, when you are determining how much of a plant or seeds to buy. Once the map is drawn, write in any information you know about soil characteristics, drainage, environmental conditions (sunny, shady, windy), and the names of trees and perennial plants that already exist. Your map will let you know exactly what you have to work with, and will give you a realistic idea of ​​problems that need attention or features you'd like to change or add.

Gardening 101
It is important to understand the magnitude of your project before you begin. Getting the background information necessary to fulfill your goals may take an hour or a week, depending upon your level of experience and how involved you plan to get. Consulting your garden guide is a great way to begin – I suggest Warren Schultz's The Organic Suburbanite, The New Organic Grewer by Eliot Coleman, Rodale's Chemical-Free Yard & Garden, or The Handy Garden Answer Book by Karen Troshynski-Thomas. You can also go to your local library and explore their resources or contact your local garden club for their suggestions. As you research, write down how long each project will take, what tools you will need, and the approximate cost of everything you will need. This information will be invaluable when you make up your shopping list and schedule of activities. Scheduling and Organization. A schedule of activities lists what you hope to accomplish in what time frame. It will help keep you on track. It is important to be realistic about what you are capable of.

This is not a project that can be taken on alone in a week. Staggering your major tasks over time will make them easier to accomplish and save you the ultimate frustration of unfinished projects. Planning for the long term will aid in your organization. You can create a year-by-year schedule that maps out a time frame in which to achieve your big goals. Obviously, the schedule can change as time goes by, you learn new methods and you rethink your objectives, but maintaining focus on what you hope to create in the long term can keep you motivated on what you are doing now.

Tool Tutorial
You have a plan! You have knowledge! Do you have tools? Chances are you may be able to obtain most tools at your local lawn and garden store. Bring the list that you assembled in Gardening 101, and, if you are a seasoned gardener, assume that the same pests and plagues will be back that you deal with last year and buy your supplies now. If you are new to the garden scene, buy the basic tools that you will need, and then nose around the neighborhood and possibly your local gardening club to see what is recommended for what you are planting and where you live.

Basic Tools:

  • Diggers – You will need a spading fork for aerating your soil and turning your compost pile. Look for a spading fork with rectangular, flat blades. A manure fork may also be compost-pile friendly when it comes to turning.
  • Weeders – Weeding tools include hoes and short-handled cultivating tools. Both are made in a variety of styles, and you will probably want more than one of each.
  • Hoe
    • hoe types include:
    • Swan-neck hoe – The curved neck positions the cutting blade to skim just below the surface, making it ideal for light work around garden crops.
    • Oscillating hoe – Also called a scuffle hoe or hula, it has a hinged, double-edged blade that barely disturbs the soil surface, minimizing the number of new weeds brought to the surface.
    • Collinear hoe – Designed by Eliot Coleman, the narrow blade and angled handle are useful for cutting off small weeds with little soil disturbance.
    • Eye hoe – Also called a grub hoe, the heavy blade is for hard chopping at tough, overgrown weeds.

Standard short-handled cultivating tools:

  • Hand cultivator – A tined tool, useful for disturbing the soil surface around close planting to uproot young weeds.
  • Dandelion weeder – Made for arousing weeds with long taproots.
  • Pavement weeder – A trowel for removing weeds in cracks of stone slab or brick walkways.
  • Pruners – Pruning trees and shrubs promotes growth and good health, and pruning out diseased wood helps to control disease problems. Pruning tools come in varying sizes depending on your need. Choose a sharp, high quality pruning tool.
  • Tillers – Tillers will also range in size, depending on the job. There are large, gaspowered mills for breaking ground or big jobs, and small tillers that are lightweight and are useful for cultivation around perennials. Rent a few tillers to try them out before buying, as they do differ a great deal and can be expensive.
  • Sowers – Wheeled seeding tools that have changeable interior disks for different seed sizes and spacings are available and very handy if you are planting large areas.
  • Comfort tools – There is a plethora of comfort- oriented garden accessories available on the market today. Products range from gloves, to knee pads, to small, wheeled benches / carts. It is up to you to decide what will suit your needs, if you need any at all ..

Starting From Seed
Starting your plants from seed will ensure that they are chemical free. Most transplants sold in garden centers have been treated with chemical fertilizers or pesticides. Seeds themselves bought at garden centers may be covered in fungi, so be very careful about what you buy or buy from an organic seed supplier. To start plants from seed, you need sterile soil, sterile planting containers, and labels. It is better to grow each seedling in a separate container to avoid the damage incurred by ripping roots apart, and to make for a less shocking transplant. If you purchase soil mix, be sure that it is sterile to avoid spreading disease to your seedlings.

To make your own mix, use vermiculite (a mica-based mineral that has been heated to make it expand to many times its original size), perlite (volcanic ash that has been heated and 'popped'), and sphagnum (moss that has was collected while still alive, discharged, and then finely ground). Add 1 tablespoon of lime for each 2 quarts of sphagnum that you use to counteract its acidity. Good recipes for soil mix are 1 part sphagnum and 1 part vermiculite, or 1 part each sphagnum, vermiculite and perlite. Seeds actually need heat, not light, to germinate. The heat from a grow light or sunny window may be enough for some, but placing the containers on top of a warm refrigerator or on a seed-starting heating pad may be necessary.

Keep your seeds moist by planting them in moist mix and covering them with plastic wrap. As soon as you see the first sign of life, remove the wrap and place them someplace where they will receive 8-10 hours of sunlight per day.

Water them care fully with a spray mister, careful not to knock the seedlings over or wash away the soil. Before you transplant your seedlings outdoors, they need to be acclimated to the different climate. Bring them outside and place them in a sheltered, somewhat shady spot for a few hours each day, gradually increasing their exposure to the elements over a week or two. Plants have a hardiness zone, an area based on the average annual low temperatures where a plant is most likely to withstand the region's annual low temperature http://www.usna.usda.gov/Hardzone/ushzmap.html . The US Department of Agriculture (USDA) has produced a map that breaks the US into 11 zones. Growing plants that are outside your hardiness zone is not impossible, but they will need special attention. When deciding what to plant, consult a hardiness zone map to come up with plants that are most likely to thrive in your zone (see map).

Garden Design
Switching to chemical-free gardening will not only mean changing your gardening practices, but also your gardening design. Gardening in beds, as opposed to rows, provides for better weed, disease and pest management. Beds are also more attractive and easier to maintain. In a garden bed, everything is planed within arm's reach. The leaves of adjacent plants shade the soil, reducing weed growth. Diversity in a garden bed also has many advantages. A variety of plants in a mixed bed provide some natural pest protection by making it difficult for pests to find and eat their target plants, or helping to attract insects that are beneficial to your garden and prey on pest insects. It also reduces the chances that pests and disease organizations will build to epidemic levels, as they will not be able to hop from tasty host to tasty host, as they would if you had planted in rows. Your soil will also reap the benefits of your diverse planting techniques. A good example is planting nitrogen-gobbling corn with nitrogen-giving beans. Pairing up particular plants or planting in variety can help the soil maintain its nutrient balance, ensuring happier plants and a better crop yield. In fact, this technique even has a name – companion planting.

Companion Planting:

Much of the science of companion planting is figuring out what works for you. Many books can give you guidelines on what plants work well together. Some plants are attractants, some repellents, some can be inter-planted with your crops and flowers, and some compete too vigorously and should be planed in separate borders or hedgerows. For example, sunflowers are a good border plant, appealing lacewings and parasitic wasps; radishes are good to inter-plant because they repel the striped cucumber beetle; and marigolds are good to both use as a border and inter-plant, as they attract hover flies and repel root nematodes, Mexican bean beetles, aphids, and Colorado potato beetles. It can be confusing, and not all plants work well together. Your best bet is to start simple, determine what pests you encounter, and work from there, altering the plants in your garden bed as needed from year to year. Often, a mixture of flowers, vegetables and herbs work well together in a single bed.

For a good guide to the basics of companion planting, consult Rodale's Successful Organic Gardening: Companion Planting. Making your bed. Making your bed can be as simple as marking off 3-by-5-foot sections of garden with pathways left between them. However, to optimize the advantages of planting in garden beds, raise your beds. Raised beds provide lighter, deeper, more nutrient-rich, water absorbent soil. Raised beds, however, must be considered as permanent in order to maintain their splendor. They can not be walked on or broken down at the end of the season. You can build sides on your bed with bricks, rocks, or cedar 2-by-4 or 2-by-six planks to maintain the shape instead of raking and reshaping the bed every year.

Stay away from pressure-treated wood, as it is treated with wood preservatives that are harmful to you and the environment. How do you achieve raised beds? With double-digging, of course! (This is also known as hard work.)

Double-digging raised beds.
1. Dig out the top one-foot of soil along one end of the bed. Keep the soil in a wheelbarrow or on a groundcloth.
2. Loosen the exposed subsoil by thrusting in a spading fork and twisting its tines back and forth. For extra benefit, add a small amount of organic matter and work it in as you loosen that subsoil.
3. Once the subsoil is loosened, move over and begin removing the topsoil from the next strip of garden bed. This time, instead of keeping the topsoil that you are removing, shovel it over the subsoil to which you have just added the organic matter. You can add a little more organic matter to the topsoil as you shovel.
4. Repeat step 3.
5. When you have reached the last row of your garden bed, use the reserved topsoil to cover the last area of ​​exposed subsoil.
6. Plant!

Composting
Compost is a great fertilizer and can aid in pest prevention. Compost is created when microorganisms, earthworms and nematodes consume and break organic matter into simpler compounds. This process happens more quickly in an active compost pile because these microorganisms have the required heat, air and moisture, and a variety of raw materials to digest. An active pile requires turning every week to add oxygen and keep the decomposition rate high; a passive pile is a pile of organic matter left to deceay over time – usually in one to two years. Whichever method of composting you choose, the first step is making a compost pile. You can layer the materials in a heap, set up a heavy chicken wire frame (this works well for a passive pile), build wooden or concrete-block bins, or buy a commercially made bin to hold your pile.

Some commercial bins have built in rotating turners that will make your job much easier. The ideal size for an active compost pile is 4 feet by 4 feet, though size can vary. Choose a location that is shady and well drained for your pile. Clear away any surface cover at the site, loosen the soil with a spading fork, and put down a layer of wood chips or brush as a base. You can toss in garden or kitchen wastes, grass clippings, newspaper, manure, and sawdust. Avoid adding kitchen waste that is heavy in oil and meat products. Shredded materials make better compost more quickly. Try to alternate layers of plant material (chopped leaves or straw) with nitrogen-rich materials (kitchen scraps with manure and blood meal). Keep your pile moist, at a similar level to a squeezed-out sponge, and keep open piles covered with a tarp or heavy canvas so that they will not become waterlogged in the rain. If your pile becomes too dry, add water with kelp extract to moisten it and stimulate biotic activity.

Turn your active pile regularly, mixing and loosing the materials with a spading fork, to prevent overheating and keeping microorganisms happy and active. Ideal active compost temperature should be within 140 ° to 150 °, or at slightly higher temperatures if you are composting damaged plant material, around 160 °. Your organic compost pile will yield rich humus that will be an ideal fertilizer to your garden. It will save you the money of buying commercial, synthetic fertilizers, many of which have shown to contain toxic waste. Healthy soil makes for hardy plants. Planning your garden can be the most important thing you do this growing season. With a solid plan in place and established

goals, you can minimize your pest problems and potential frustration, and maximize your growing season, and your garden's beauty. All this while saving on your grocery bill and increasing the quality of food you ingest by leaps and bounds. By planting an organic garden you will also be reducing your carbon footprint via producing some of your food (requiring no transportation or storage at the grocery store or packaging) thus contributing to our culture's sustainability in general. Check out Thrifty & Green for more articles on how you can save money and live green.

Suppliers:
* Seeds of Change, 888-762-7333, seedsofchange.com
* Gardener's Supply Company, 128 Intervale Road, Burlington, VT 05401, 888-833-1412, (fax) 800-551-6712, gardeners.com
* Harmony Farm Supply and Nursery, 3244 Highway 116 North, Sebastopol, CA 95472, 707-823-9125, harmonyfarm.com
* Peaceful Valley Farm Supply, PO Box 2209, Grass Valley, CA 95949, 888-784-1722, groworganic.com
* Gardeners Alive, 5100 Schenley Place, Lawrenceburg, IN 47025, 812-537-8650, gardensalive.com

Resources:
* Bradley, Fern M., ed. Chemical-Free Yard & Garden, Eamus: Rodale, 1991.
* Troshynski-Thomas, Karen, The Handy Garden Answer Book, Detroit: Visible Ink, 1999.

Dental Health Benefits of Orthodontic Treatment

Increased awareness about the importance and benefits of orthodontic treatment to achieve a healthy dentition and a pleasant smile are motivating adults to seek more treatments today to improve their dental aesthetics than in the past.

Currently, the amount of Orthodontic Treatment Procedure provided to adults covers 30% of orthodontic practice. The desire for a better smile is being raised not only by the patient, but the general dentists are also more informed about the possibilities of tooth movement in the adult to facilitate the establishment of function and health to the different components of the stomatognathic system.

But are we aware of everything we achieve when we undergo orthodontic treatment? We will list the benefits of orthodontics, beyond the smile. Nowadays, along with teeth whitening treatments or the placement of porcelain veneers, orthodontics is the most requested aesthetic dentistry treatment in dental clinics.

In short, orthodontics has many benefits, much more than the mere fact of getting a beautiful and aligned smile.

Benefits of orthodontics:

1. Improves the position, function, and aesthetics of dental pieces: This is perhaps the benefit that is most clearly seen.

2. Get the bone and gums to look healthier: The correct occlusion and position of the teeth propitiate that both the bone and the gums are healthier.

3. Get the mouth to improve its condition and also oral hygiene: The correct alignment of the teeth facilitates Dental Health and proper cleaning of the entire oral cavity and, therefore, improves the overall condition.

4. Relieves possible excessive pressures on the jaw joint: Correction of the bite and position and alignment of the teeth corrects malocclusions that sometimes generate pressure on the joint.

The correction of the bite and position and alignment of the teeth corrects the malocclusions that sometimes generate pressure on the joint.

5. Improves digestion: A malocclusion can cause the food not to be chewed properly. This makes swallowing and digestion of food more difficult. Once the bite is corrected, this problem is also solved.

6. Reduce mouth infections, tooth decay, and periodontal disease

By improving the general condition of the mouth, along with the ease of Oral Health, the risk of caries and contracting some other type of periodontal disease is reduced. It facilitates tooth brushing, and it is easier to remove dental plaque, which also prevents the formation of tartar.

7. Can improve even speech and pronunciation

Some patients with severe bite problems may have problems articulating words and/or pronounce them. When they undergo orthodontic treatment, these difficulties for speech are improved and corrected.

8. The risk of dental trauma is reduced

Patients with protruding frontal teeth, for example, are more at risk of trauma. Different Types of Orthodontic Treatment are available to deal with this problem.

9. Enhances the patient’s self-esteem

A patient who has had problems with malocclusion or crowding or poor positioning of the teeth will often have felt embarrassed when smiling. In some cases, this feeling even provokes complexes.

When the situation changes and improves your dental health and appearance, these complexes disappear and make the patient feel much more confident and socialize without problems.

10. Increase the quality of life

As a result of all the above mentioned, in short, it significantly improves the quality of life of the patient, both physically and psychically.

Garage Door Opener Repair Tips

Garage doors are an integral part of your house furnishing but unfortunately, most of the times they are left unattended to whenever a repair of the household is undertaken. Hence many people are faced with problems of the like of sticking or jammed doors, unwarranted opening of the doors or its not staying open.

As far as sticking or jammed doors are concerned, it is usually because of deformed frames or channels through which the door slides and they can be easily repaired without much hassle. Usually, with a simple toolkit of a hammer, a wrench a few nut and bolts and a screw driver, you can fix most of these problems by yourself. The erratic opening and closing of the door might be due to a depressed key in the opener control or there might be some problem with the opener circuit of the which can easily be fixed. But the problem arises when some major part of it develops a defect, for example, the gears of the door opener. In such cases, a more involved repair is required. Hopefully, the following steps would give you some useful insight about repairing and replacing the worn out gears in your opener.

You can understand if the gear has broken even though the motor is working properly and the torsion springs are intact. These gears, usually made of plastic, are among the weaker parts of the opener and can be damaged due to several reasons like old age, prolonged usage without maintenance, imbalance in the garage door or may be due to a manufacturing defect.

But, with a few simple equipments and following the instructions properly, you can change these gears on your own.

First and foremost, you should disconnect the electric supply to the garage door to prevent any chance of electrocution and also so that no one operates the door while you are working on it. Next, you should close the door manually and remove it from the pulley to ensure that the door does not accidentally hurt you while you are servicing it. Now you are ready to set about repairing your opener and replace the gears.

Now you need to open the retainer cap of the belt pulley and remove the sprocket. Now you can remove the chain or belt from the sprocket after marking its position and tape it to prevent it from getting twisted up and messy. Then remove the end covers, the drive gear, the retaining clip and the RPM sensor and also disconnect the motor. An assembly of nuts holds the motor to the shaft. You need to remove these nuts first. Once you have removed the motor from the drive shaft, you can remove the gear and replace it if necessary. Having replaced the gear, you need to start reassembling the entire system in the exactly opposite manner. Take care to see to it that each part goes into the right place to avoid any further problem with your garage door. Thus, we see that changing the worn out gears is a bit more involved. Hence, if you are not very confident about doing it yourself, you should call a professional garage door repair service to tend to the matter.

10 Ways to Decorate Your Home With Decorative Lights During This Festival

Festivals are the seasons of joy; they are the primitive reason why we work so hard. We do that so we can spend some good and joyous time with our family and loved ones. May it be Holi, Diwali, or Christmas, each festival brings a specific kind of spark and charisma with it. As we all know, two major festivals of light and celebration are just around the corner (Diwali & Christmas), the decoration period is just about to begin. Decorating your home for festivals not only give you the blissful joyous feeling, but also give your home or office a new and refined look. But if you are just running short of ideas on how to decorate your home and make it enchanting, be happier, as here we are going to offer some exclusive yet in-expensive decorative home ideas with elegant decorative lights. Here it goes-:

1. Fairy Lights Jars-

It’s one of the most inexpensive and easy-to-do decorative ideas of our list. all you have to do is find some elegant looking decorative lights and a big empty jar, and then you just have to fill the light in that jar. If you are using them for Diwali decoration, just use a jar and a bunch of led lights and place it in a creative and elegant way, but if you are using the same for Christmas celebration, we suggest you to add some fake snow and little home & Christmas tree to give it a whole different and eye-catching look.

2. Make your hallway magical as ever-

The beauty of our ideas is that they are so charismatic and really quick. So, for making your hallway heavenly, you don’t need to invest hours or days. You just have to purchase some beautiful looking twinkle led lights, and place them on the top portion of your hallway. And whenever you walk through it, you will feel heavenly on every single step.

3. Preserve Memories with Decorative Led lights-

Memories make life bearable, isn’t it? And the best way to preserve memories is through taking pictures, something our whole generation loves. This festive season beautify your favourite wall with the collection of your most favourite pictures and decorative led lights. Get creative and make a collage of that, it’s something that will last for whole year long.

4. Give your home a richer look with elegant Serial Lamps-

If you don’t know, serial lamps are most commonly known as Christmas lights which are available at large in various shapes and sizes of colourful led bulbs that exemplify the row of diyas. Bringing them in, don’t only offers you the mental peace that kids will not be affected by diyas anymore, but will give your home a whole different and majestic appearance. It’s suggested to buy those serial lamps in meters as per your need and gift your home the majestic look.

5. Enjoy the Splendour of Diwali Lanterns-

As the name suggests, this tip is for Diwali decoration. Not many people know, but lanterns are quite a significant component of this festival and primitively utilized on the stairs of the home to incorporate the illusion of space and attract magnificence to the house. Bring the charisma of attractive Diwali lanterns with Diwali lights in your space, and use them to light up the main-way to your place.

6. Beautify your Veranda or balcony with DIY LED Lights Cups-

If you have a few days for decoration and you wish to decorate your place with less material and in an economical way, we have something for you. Just purchase your favourite Decorative led lights and use disposable Polystyrene cups. Paint the cups in different colours and place them around the decorative led lights you have. Wait for an hour and then you are good to use a decorative item for either Christmas or Diwali.

7. Looking for a change in home? Add String Wall of Lights-

If in Christmas, you feel the need of dividing your room from mid, instead of calling the contractor get yourself decorative string lights and create a wall of that. It will solve your purpose while giving you something to be happy about.

8. Quick Decoration with String lights-

This might be the fastest and most creative decorative idea we are sharing on this article. If you really have less than an hour and need to decorate the outer space of your home, bring in the magic. Purchase the decorative string lights and place them in a creative way on a wall. Just place all of that in such creative way that it adds more splendour to your home.

9. Make the whole room magical with creative Christmas lights-

Yes you can do that, moreover it’s not expensive or time-taking. all you have to do is purchase yellow or golden colour led lights and give your room the whole different and creative look. Drape the Christmas lights along a wall and make the whole space glisten like magic.

10. Christmas Tree with Led Lights-

One of the best way to create a new and elegant Christmas tree is to use the Christmas lights, but in a different way. To begin with, haul out of tomato cages from the garden shed and wrap the wire with elegant looking Led lights. And you are good to go with a graceful Christmas tree.

How To Clean Furniture – Painted, Leather and Wood

When asked how to clean furniture, the answer would be dependent on what type of furniture needs cleaning. Are you cleaning wood furniture or leather furniture? Is it painted or not painted? The first step in cleaning furniture is to classify it according to the material that the object is made out of. It's not good to use wood furniture cleaning products on leather furniture. This will damage the furniture. Although self-explanatory, the importance of classifying the furniture needs to be reiterated.

Painted

The easiest furniture to clean is painted ones. All you have to do for everyday care is to wipe it clean with a damp cloth. When cleaning, make sure that you do not leave water spots and dry them right away as it could leave a permanent mark on the furniture. If there is a need for you to repaint the furniture, try to match the same color if possible. You can also use an oil finish for further protection.

Leather

The most asked question though is how to clean furniture that is made of leather. This is probably because genuine leather furniture is expensive to buy as well as expensive to repair when damaged. Some pieces of leather furniture are even hard to repair because the type of leather used can be hard to match or simply unavailable. That is why it is recommended to position your leather furniture at least 2 feet away from heat sources and definitely away from direct sunlight as this will cause cracking and drying out.

So how to clean furniture made of leather? For daily cleaning, you can wipe it with a damp sponge or you can use a soft cloth. When using a cleaning solution, avoid those that have oils, silicones or waxes as it can damage the leather finishing. The most common mistake is to use baby wipes for cleaning – never do this! Baby wipes have a strong alkaline component which is not good for the leather.

Wood

Wood furniture is the most common type of furniture in many households. That's why many are also asking about how to clean furniture if it's made of wood. The first thing you have to know when cleaning wood furniture is the type of finishing used on the wood. There are different types of cleaners, polishers and wood conditioners available on the market that are made for specific types of woods and finishes. As a general rule, always wipe the furniture in the same direction of the grain of the wood.

For shiny looking wood furniture, you can use a furniture polish. It is imperative that you use the same type of furniture polish every time you clean the wood furniture. This will avoid causing polish smudges. You have a choice of oil based wood polish or wax based wood polish. Both are effective in maintaining shiny looking wood furniture. Apply them regularly to avoid further questions like how to clean furniture when it looks old and beaten.

A Delightful Bed and Breakfast Stay

A bed and breakfast is a place where you, the traveler, can enjoy as well as have the best of what having a home-like vibe is about. In addition, you’re going to be partaking in a more-than-good meal once the morning comes.

There are a number of inns that can provide you with comfortable board as well as lodging, not to mention, great breakfast. These places are usually located some place quaint as well as tranquil.

A lot of bed and breakfast hosts happen to be locals who opted to open their homes to travelers, such as yourself. They’re located close to civilization but are far enough so you can spend a bit of peace and quiet. Moreover, you can easily get to one to enjoy your day roaming about and exploring what Mother Nature has to offer. All in all, there are quite the number of places to visit as well as explore while you make your stay there.

A bed and breakfast is normally situated in a somewhat rural district that’s a short distance away from a bustling town. Additionally, there are also those that are conveniently located near airports.

Both comfortable as well as affordable accommodations await single individuals, businessmen and professionals and couples and families when they check into a lodge like this. You can expect not just comfortable but clean rooms once you decide to make your stay there.

Excellent inns provide a home-like atmosphere as well as amenities that can rival that of bigger hotel chains. There are even rooms come well-equipped with in-room coffee or tea facilities, TV’s and great views.

The rooms boast of having private facilities like central heating, double or twin beds as well as clean towels. They can also come equipped with a Wi-Fi Internet connection. If you’ve gotten there by car, there are ample parking spaces that are monitored through CCTV, safely securing belongings around the clock.

Definitely the highlight of staying at a bed and breakfast is, of course, the morning meal. They’re homemade as well as freshly prepared each morning. You can even request a continental breakfast if you wish.

You would certainly feel like you’re at home sipping some hot brew at a bed and breakfast, so you can start your day off right. Conveniently, there are nearby shops that you can visit just in case you’re looking for something to remember the place by.

Paralegals Serve Important Functions in the Law Field

A career in the legal field can be rewarding, demanding, challenging and lucrative. Having the ability to help change laws, protect victims, prosecution criminals, fight for justice and help people through all sorts of legal situations like divorce, wills, business matters, adoption and other life situations can give one a sense of accomplishment and meaning. Considering a career in the legal field can become quite daunting and overwhelming when one factors in the economies of cost and time of going to law school, but that should not stop one from pursuing their dreams of working in the legal field.

A career as a paralegal can be a great way to enter the field of law without the extreme time and financial commitment as law school. Another benefit of becoming a paraprofessional is that that one could work in a law office and gain valuable on the job experience while attending law school if becoming a lawyer is something that appeals to them.

Paralegals are invaluable to the lawyers and the offices that they serve. Becoming a paralegal is a wonderful way to step into the justice field and provides a way for individuals to make a difference in the way cases are handled, researched and prosecuted or defended. Most paraprofessionals say that while their work is challenging and demanding, the satisfaction they derive from helping craft a case far outweighs the stresses and demands of the position.

There are many ways to become a paralegal in the United States. Individuals can choose to enroll in a two-year course or bachelor's program in paralegal studies. Many community colleges and universities offer certificate degrees or associate degrees and these programs offer in depth training that result with the student being job ready upon graduation. Other paths to becoming a paralegal are to get on the job training in an attorney's office to learn the necessary skills required for success in the field. Many successful paralegals began their careers in attorney office mail rooms, slowly working their way up to becoming a paralegal.

Whether an individual chooses to enroll in a structured associate's, certificate or bachelor's program or chooses to gain their skills by working their way way through the career ladder in a firm, paralegal training provides an excellent and exciting way to build a career and make a living. Helping lawyers research and learning the intricacies of the law give them great insight into and knowledge of the workings of society and can be a lucrative career choice.

The annual median salary for paralegals in the United States is over sixty thousand dollars and many paralegals make up one hundred hundred per year. Choosing a career as a paralegal is a smart way to be involved in the legal profession with very little educational financing strain or years of time consuming courses and exams. Consider a career as a paralegal if law appeals to you. Becoming a paralegal just may be the perfect fit and choice for you and be your dream career.

Building Construction, Modification and Customization Work

Building construction is a phased task, which is always completed in one by one completion of different Phases involved. It needs a whole lot of planning. You need to choose a place for building construction, if you are planning to build a residential home for yourself, you will certainly look for calm places along with natural beauty, out of the hustle and bustle of modern life and pollution, but nearby all major facilities required in daily life, like schools-colleges, hospitals, shopping centers, entertainment parks and health clubs.

Similarly if you are planning to construct a building for your office premises then you will certainly look for the fundamental requirements of electricity, telecom, and other required infrastructure facilities. Easy access to that area via bus-trains and other public means of transport is also important, so that employees can attend offices on time and they can commute without any problem in case of late or night shifts.

If you have planned for fresh complete construction of your house, or office complex, or may be you have plans of modification of existing building, or may be some customization work in terms of design, or functionality. The case often arises when the original construction work lacked proper planning, or you have shifted to already existing concessions.

You need assistance of Building Construction companies to carry out the tasks efficiently. They are certainly of great help right from the planning and implementation to construction, furnishing and finishing in all types of cases be it fresh construction work, customization or design.

But, the selection of construction companies to hire for services is very important. You need to do a survey over them. Contact several companies, and ask their details, charges, as well as the time required in task completion. Always go for a licensed and insured General Contractor, equipped with latest machines for construction work. Cross check past credentials of these companies for an overview, it will be a decision factor for you.

Look for construction companies that offer highest quality and most cost effective methods of construction. Some companies are experienced in all levels of construction and some has specialization is a particular area, so choose them according to your need.

Granite Worktops – Attractive and Durable

Granite worktops, also called countertops or benches, have become a leading choice in many applications. Whether used in the home kitchen or in a corporate setting such as a hotel, this style of countertop has become very popular in recent years. It is the hardest available in commercial stone and that makes it a great choice for durability, which also translates into longevity. It is also provides beauty in addition to function.

So what are all of the benefits of granite worktops? For one, they are easy to clean. Note that in the kitchen, a polished and sealed slab is recommended due to bacteria from food. A sealed piece is simply the easiest to keep clean and free of bacteria. Beyond that, the first step in cleaning simply involves removing any debris from food, toiletries or the like. Once this is done, you will want to take a mild soap and water solution and wipe down all of your surface areas. Rinse any traces of soap your cleaning cloth and then repeat the process using plain water. Now you will take a soft dry cloth and buff the counter dry. Voila, just like new. This style of worktop, when well cared for, can last a lifetime. Be sure to follow the retailer's specific instructions for resealing so that it will stay looking like new.

Another benefit is that granite worktops are exquisite and unique. Twenty homeowners on the same block can have a worktop in the same color, yet none of them will be alike! This precious stone is formed by volcanic magma, or molten rock, which has mixed with quartz and feldspar while flowing between the layers of the earth. The amount of other minerals and the rate at which the magma cools is what determines the color, look and texture of your slab. You can find gorgeous varieties of blues, pinks, oranges, browns, reds, greens and even different shades of black and white. With this rainbow of colors, you will be able to coordinate with virtually anything that you would like.

As far as cost is concerned, you will pay more for granite worktops than you will for laminate. Try to think of this as paying for value. Value does not mean the least expensive thing around. Value, by definition is 'a fair return or equivalent in goods, services, or money for something exchanged'. Most would say that a countertop that lasts for the rest of your lifetime would have considered a fair return. When comparing prices between retailers though, do make sure you are getting the most bang for your buck. Be sure to see if the price per square foot includes cutting, polishing, delivery and installation. Also, check to be sure that you are comparing slabs of the same thickness. Most granite worktops are 30mm thick. A less expensive slab might be thinner, therefore making it not as strong as the 30mm. Pay attention and be sure to ask questions. Then, go enjoy the beauty of your brand new countertop!

Why Roof Tile Is The Superior Roofing Product

Roof Tile … what comes to mind when you hear that? Picturesque vistas of the Greek coastline, quiet Tuscan villas overlooking gentle hills, French chateaus at the foothills of the Pyrenees, Spanish haciendas on the Iberian peninsula, Mexican sun-baked resorts, Scottish villages shrouded in mist or maybe Chinese cities so ancient that time sees to have stopped? The common thread of all these gorgeous areas, from China and Europe to Central and South America is that they know the qualities of roof tile.

Why then do you see so little tile in the US? I believe it is fear. Architects and designers fear the extra design and structural support roof tile demands. Roof contractors fear the possibility of overestimating or underestimating their roof tile needs and not being technically adept to install it correctly. All of these fears can cause architects, designers and contractors to charge quite a bit more for working with roof tile. This leads us to the builder's fear; tile's expense.

Is roof tile more expensive to use than the most common roofing product used in the US, asphalt shingle? Yes, the initial cost is more expensive, however take heart because tile's most redeeming qualities wipe out that extra expense rather quickly.

The first quality of roof tile that begins to offset its expense is its energy efficiency. Tile is commonly installed on what is called a "floating system". Each tile is fastened to a batten strip of wood or other material that rises the roof tile off the roof deck. This means the tiles are not contacting the roof deck at all and this has created additional airspace between the tiles and the deck. The airspace insulates the roof deck and thus the interior of the structure from 55% to 75% of the radiant heat from the sun. This same effect is what makes double pane windows so effective and it also keeps our coffees nice and hot in our thermos mugs. An interesting experiment to see this first hand is to put your next cup of coffee in a regular glass. The coffee simulates the sun's radiant heat and the glass is simulating direct to the deck applied asphalt shingle. Because the glass is in direct contact with the radiant heat of the coffee the heat comes right through the glass, ouch! Now pour the coffee into a fancy thermos mug, pick it up and viola, no burned hand. Just like the airspace in the thermos mug keeps the coffee's radiant heat from burning your hand the airspace under the tiles keeps the sun's radiant heat from heating your interior. A cooler interior means less work for the HVAC and that means saving money on energy consumption.

The next quality of roof tile that offsets its expense is its toughness. Tile is very hardy. Water does not penetrate it. Wind has a hard time damaging it as some roof tiles are wind rated at 150 mph or greater. Freezing temperatures do not affect it. Tile does not burn. Most hail stones shatter against roof tile's surface. All this together can mean significant saving on insurance premiums. Take a look at online photos of wildfire areas that have devastated homes in Texas, California, and other western states. You can often find a house or two right in the middle of a fire disaster area still standing. Usually it will have tile on it. Areas hit by large hail that are primarily asphalt shingle roofed structures will all have to be replaced, at the home owner's and insurance companies' expense, except for those few homes with roof tile. Usually they will only have superior damage. There are tiles made today that are Class 3 and Class 4 hail resistant. Insurance companies will discount premiums for the use of these hail resistant and fire resistant roof tiles. More money saved each month on insurance means more you have for better things.

The last quality of roof tile that offsets its expense is its longevity. Tile lasts, plain and simple. There is a house / pub in England that was built in the year 1260 that still has its original tile roof on it. The Sistine Chapel has had the same tile roof on it for 300 years. Tile will outline the very structure it is on. Both of the structures mentioned above have been rebuilt to one degree or another in that span of time but in each case the tile roof was reused. Tile has the lowest life cycle cost of any roofing material made today. The common asphalt shingle, any roofing contractor will tell you, will have to be replaced about every 10 years. That means it is a temporary roof cover, not a roof. It also means that the initial savings of using asphalt shingles instead of tile is also temporary. What you save today you will pay in 10 years and then again 10 years after that. It makes more since to buy one true roof one time does it not?

There are of course other qualities of roof tile that should be mentioned. Range of colors to select from, different profiles to choose from and a multitude of design options are all great qualities for tile to have. Today's roof tile manufacturers offer all of these things and more but the one true quality that people notice first is the beauty of the roof. Curb appealing with roof tile is automatic. How many of us have used a roof tiled home or business as a navigation point? "You just go __ blocks past the pretty red tile roof house." And while this aesthetics quality does not put money into your pockets right away, you can see a return on your investment if you ever have to move or sell your property. Any real estate broker will tell you that tile roofed properties retain their value better than any other type roofed property. This means that you will get more of your money back by using roof tile than by using any other type of roofing material … if you sell.

Color Theories in Package Design – Color Blindness Should Be Considered

First, everyone must realize that you do not see color the exact same as any other person. This becomes most prevalent when groups of people pick a favorite color. That bright orange blouse may appall you, while your aunt thinks it makes her look young and vibrant. Those choices are general, and easy to understand; but what about choosing between 6 different shades of red, not using saturation – that is pink/burgundy – using hue which may be thought of as yellow-red (warm) to blue-red (cool). If we ask for opinions of preference that choice become more difficult.

Now, you must realize that, statically one of twelve males is significantly color blind as opposed to one in two hundred females. This takes on a bit of irony since the gene that causes color blindness is passed down by the mother to her son/daughter. By color blind I mean having one of the major afflictions of color blindness:

  • Protanopia – The person does not see red/green – red will become brown, orange – dark yellow, green- dark yellow, and purple – dark blue.
  • Deuteranopiat – Here the colors become even flatter – green becomes brown, and purple the same as plain blue
  • Ritanopia – With this the warmth is removed from the colors – bright reds turn magenta, orange to pink, green to blue, and purple/blue to cool shades of blue/maroon
  • Monochromacy – Is as it states, lack of color vision – everything is black and white.

While these are the major forms of color blindness it has been variously estimated that up to 4 in 10 males is afflicted with some deficiency in color perception and 1 in 50 females are affective similarly. Color blindness can be also caused post-birth by “Shaken Baby Syndrome”, accidents to the retina, and/or brain, UV damage – looking at the sun too much, and certain medications.

Now how does this relate to the consumer packaging industry?

A recent study at the University of British Columbia found that when a series of fictional ads was shown to a control group of students, red gave them a more favorable evaluation of the products presented – regardless of the type of product. Blue evoked thoughts of an ocean, water, openness, peace, and tranquility. Not the best frame-of-mind for impulse purchases. Taken a step further the study found if the message was eclectic, such as toothpaste that whitened teeth – blue works well but to accomplish a specific goal – stop tooth decay – red performed much better. This study only used the red/blue color and none of the hues of each.

Other studies show us that yellow can be a color that induces hunger – think McDonalds’ Arches – possibly because of Americans fondness for starch/satisfying foods that are yellow/brown – think burgers and fries. Conversely, blue seldom seems to work with food because it suppresses appetites. Besides blueberries, really how many blue foods are there?

The basic packaging colors have always been the same – gold/silver/purple for regal/royal; white for a crisp, clean look; black for elegance; the pastels – melon, sky blue, gray – for soothing/relaxing products; and red/yellow to evoke emotion and generally best for impulse purchases. Blues/Greens rarely surface in packaging products except in non-descript household products or cereals. Most designers and packaging experts try to analyze how people would like to see themselves – not how they really appear. The woman wanting to inspire her husband’s lust would be more likely to buy products in red than a pastel package. Likewise, the lingerie usually thought to be sexiest is black or red, not blue or green.

Consumers of today are extremely sophisticated in comparison to only a few years ago. Consumers rarely buy any product without having prior knowledge of the ingredients; or taking the time to completely read them in the store. Because of this, the current trend to minimize the type size on the reverse labels is a mistake. Print the labels or silk screening in a sufficient size and color for easy reading. It is great your product is 100% natural but when you present the ingredients in 5 point type, and gray ink, on that clear label, so the only reading contrast comes from your product in the background; you’re defeating the purpose of the informational label. People with color blindness deficiencies may not be able to see your message at all. Conversely, with the aging of America you must remember that many people don’t always shop with their reading glasses handy. It is too easy to put the product back on the shelf than try to read what is in it.

In conclusion, design your package color using the emotion you want to convey. Keep colors complementary, stay away from excessive contrasts; unless you are selling an item that gets lost in the shuffle of display shelves. Don’t obsess about shades – your perfect red is probably just “red” to most people. Black is black, and white is white, so playing with too many shades of gray is only important to the designer who is trying to impress you with their acumen. Your wife may love that shade of purple but that doesn’t make it right for your packaging.

Painting Is an Affordable Handyman Service That Can Increase Your Property Value and More!

When most people think about painting, they tend to focus on trendy color combinations, accents, and other aesthetic considerations. While it can be exciting to think about trying out a dramatic color to make your home stand out from the landscape or finding a shade that will make your rooms appear larger, painting offers numerous additional advantages that could help property owners save money, prevent serious damages , and prepare for the future. Whether you're interested in Sunburst Orange or are looking for traditional white walls, painting is one handyman service that will bring immediate and evident improvements to your property's interior and exterior at the fraction of the cost of a full-scale remodeling project!

Outside appeal

No one wants their home to be known as the neighborhood eyesore, but that's exactly what can happen when a home is marred with stains and other unsightly consequences of a worn-out paint job. Your reputation in the neighborhood can have a major effect on your daily life as an individual, but if you own a business, there is even more at stake. No matter how good your service or merchandise may be, many customers could have turned off by a building that appears to be unkempt. Of all common handyman services, painting is among the simplest and most apprehensive upgrades. Create a welcoming atmosphere and show your customers the utmost professionalism by keeping up with your painting needs.

Increased property value

When your paint begins to peel, crack, or otherwise show signs of age and wear, it is important to seek a fresh coat in order to help preserve your property's value. That's right – something as seemingly small as a layer of paint on your interior and exterior walls can have a large effect on your home's overall resale value and its appealing to potential buyers. Invest in your home by keeping your colors bright, stylish, and beautiful.

Building protection

Painting can prevent the need for more serious and costly repairs, as this task protects against visual and structural threats such as wood rot, insect infestation, standing water, wear and tear due to inclement weather, and more. By making sure your exterior wood trim, doors, windows, and other areas receive a fresh coat of paint every now and then, you can preserve these features for a long time to come!

If you've noticed exposed wood, flaking paint, or any other deterioration in your building's paint job, it is important to take quick action to prevent further damage and to take full advantage of the benefits listed above. When you decide that it's time to paint your home or business, it is important to do your research, as no two painting projects are ever identical. Before selecting the type of paint you want to use, consider your overall goals, as well as your area's climate, the type of surface you will be painting, and more. All of these factors will have an effect on how long the coat lasts and how effective it will be serving its intended purpose. For example, a paint job completed with low-VOC paint may be best for a customer who is interested in preserving their interior air quality, while a customer who is painting their porch may benefit more from a paint that is especially effective at resisting weather- related moisture and UV damage. For outdoor projects, it may also be a good idea to consider professional pressure washing services prior to painting to ensure an even, long-lasting coat. And if you're not feeling up to tackling your painting project yourself, your local handyman service should be able to help. A well-executed, properly planned paint job could last for years, so before that brush gets dipped into a gallon of your favorite shade, stop to consider your goals and prepare accordingly.