Arches – Tip #1 to Overcome the Ceiling Height Dilemma in Your Basement Finishing Project

You don’t need much convincing to realize this obvious truth; one challenge common to most basement finishing projects is low ceiling height. Frankly, there is not a national builder around (and very few local builders) who build homes with any regard to future basement finishing.

Aside from your furnace being in the wrong spot, posts littering your rooms, and beams in unfortunate places, this means you’ll need to effectively deal with low ceiling heights.

In a recent article, I suggested 7 top tips for dealing with low ceiling heights (search “The Ceiling Height Dilemma in Your Basement Finishing Project and the 7 Top Tips to Overcome It”).

Today, we’ll discuss the first tip from that article: Arches.

One creative and effective way to overcome ceiling height limitations in your basement finishing project is the creative use of arches. They will be strictly for decoration (no structural importance), so the type of arch used is completely up to you. We seem to use a basic “flat” arch more than anything else today (ask your basement design consultant for details on what a flat arch is).

In my humble opinion, the most functional application of an arch is to hide a beam in your basement. A low beam in the already-low-ceiling of your basement is kind of like adding insult to injury.

Take for example the 8′ basement ceiling (e.g. from the floor of your basement, to the floor joists overhead that support your 1st floor and will be your future basement ceiling). Oftentimes in constructing the home, a beam is used to help support the 1st floor joists. This is typically done by running a steel beam perpendicular and below the floor joists. This means that your 8′ ceiling is now only a little over 7′ for basement finishing purposes.

Major problem right! No one wants a 7′ ceiling! However, there is a solution. Most of the time these beams are placed in areas of the basement with a natural separation between spaces. In other words, the beam is located where a family room could adjoin a hallway, or flex space, etc.

A good basement finishing designer will come up with a plan that uses this natural separation to your advantage. Once you have an effective space design, all that remains is to add a small arch underneath this beam. Now, instead of focusing on the low ceiling height, you and your visitors will “ooh” and “aah” about the arch.

Some basement finishing projects have the addition of a post supporting the beam which supports the 1st floor (adding insult to injury, THEN kicking you while you’re down!). By creating equally sized arches to either side of this post, you can again create an architecturally appealing look that will disguise the problems underneath.

For a video collage of this arch & post solution in action, visit Colorado Basement Finishing T.V.

The key to remember is that you don’t have to be satisfied with what your original builder left you with. By knowing some effective techniques, your basement finishing project can have all the appeal and style that you could dream of.

Building more…

How to Protect Curtain Walls From Damage During Construction and Shipping

Many new commercial construction projects are designed with large, glass curtain walls that are attached to the outside structure of buildings. These glass walls allow filtered natural light to enter the building interior as well as create a beautiful outside appearance. Another benefit of these wall systems is to increase fire spread between floors and to keep out air and water. Typically, a curtain wall spans more than one story and is composed of metal framing with infill units of glass. Unfortunately, these glass walls are often damaged during construction activity at considerable cost.

Curtain walls can be damaged during shipment to the job site, during installation and after installation while the remaining construction work takes place. There are several methods that manufacturers’ can use to protect the aluminum windows and mullions from damage for shipment. Protecta-foam strips can quickly be adhered to the metal surface and act as a protective barrier between stacked wall units. Reinforced cardboard edge protectors from 2.5 to 4.0 inches can be taped to all edges of the units for shipment. Lastly, rolled cardboard can be used in some cases if the weight of the units is not enough to crush the cardboard. Wall glass can be protected from scratches during shipment by using adhesive window film.

Once curtain walls have been delivered to the job site, unpacked and properly installed, they are at the highest risk of damage. Various construction trades will work both outside and inside the construction project for months or years. Not only can the aluminum be dented or scratched, the glass is at high risk for scratching and breakage as well. Some glass may be very expensive if it provides seismic- or hurricane-impact resistance or ballistic proof glass specified on courthouse projects. Protecting both the glass and metal once the curtain wall has been installed is a smart move by any contractor.

Most damage to curtain walls occurs at the lowest 5 feet of the walls on each floor of the building. This is where the workers and equipment will be in the closest contact to the walls. The best protection provides a “wall” in front of the glass wall itself. This protection wall can be constructed of wood or plastic. While wood is the strongest wall protection available, it is also expensive and time-consuming to erect. Corrugated plastic sheets in 4 ft by 8 ft sections can be taped together in front of the curtain wall providing a light weight and easily constructed wall. Unlike wood, plastic can be cleaned to remove dust and dirt as needed. Since there is no electricity for lights during early construction, protection walls constructed of white or clear plastic allow natural light to enter the building.

As the demand for curtain walls continues to increase, the need to protect these walls during construction will prove a challenge. Forward-thinking architects and building owners are taking the next step with wall systems by moving from energy conservation to energy generation. These newer walls with photovoltaic modules will be even more expensive and harder to repair or replace. With proper foresight and the use of temporary curtain wall protection, the smart contractor will not have to worry about damage to his or her curtain wall systems getting damaged.

Building An Attractive Facebook Profile

If you are going to date online you need to have a social media profile. This is a simple thing to create and something that women will no doubt look for online. You don’t have to befriend all your dates, but they should be able to search for you online. If you are going to date online, or just about anywhere, you should look at building an attractive Facebook profile. Without a good profile, you are going to send the wrong message. You want to purvey a message that is anything but boring, which means that you will need a little bit of help with creating a solid, attractive Facebook profile.

Choose Your Pictures Wisely

Do not post any pictures that make you look bad. That includes putting up images that show you drinking heavily, or without your clothing on. Do not revel in times where you look like you’re a party animal, and don’t put up pictures that put you in a compromising light. Curate your photographs to show that you travel, you love life, and you’re smiling. You want to look playful, and you want to look serious at the same time. Curating the right pictures is a great way to ensure that you are posting an attractive Facebook profile.

Do Not Post Anything Controversial

No matter how you feel about certain topics, you should look at creating content that is positive. If you are going to create an attractive Facebook profile, you will need to carefully curate what is shown on your page. That includes things that are going to uplift, and exalt, not tear down. Even if you hate the way certain things in life are, you shouldn’t showcase them on your profile. Remember, you want to stand out, which means adopting a positive personal life, not a negative one. It’s easy to be negative all the time, just look at the many guys that are on Facebook trying to pick up women.

Share Interesting News and Views

At least once a day look for interesting news and bits to share with others. Don’t be afraid of sharing things that focus on science, photography, and more. Post interesting pictures, interesting art, and things that speak to your daily routine. If you want to have a seriously attractive Facebook profile, you will need to make sure that you are sharing things that are of great interest to you and others. That means spending a little time exploring the arts, music, and things that are directly in line with what you want out of life.

Various Forms of CD Label Maker

There are CD label makers which are also good for printing labels for other purpose too. Some of them were connected to the computer and the designs are made in computer and the commands are given to print the appropriate designs. Also some of them have keyboard and screen built in it which does not require any computer to connect with it. CD label maker are different from the normal computer printers. It has special mechanism to handle the rolled adhesive paper on which CD labels are printed.

Common connectivity for CD label maker is RS-232 serial port, Universal Serial Bus, parallel port, Ethernet or any sort of wireless media. To make any labels the CD label maker requires range of materials for the development like adhesive paper, synthetic polymer (plastic) materials. There are various types of mechanism used like thermal, impact and laser but thermal mechanism are most commonly used. Two types of thermal which are direct thermal and thermal transfer type.

The direct thermal type uses heat sensitive paper which is similar to thermal fax paper. When using this technology, it tends to fade within 6 to 12 months time more over if exposed to heat,direct sunlight or chemical contact is made the life of the art on the CD label shortens. Therefore direct thermal technique is used when the requirement for the label is for the short period of time.

The second form of mechanism is thermal transfer uses heat to transfer ink from the ribbon on to the label for a permanent print. There are three forms of ribbons used in thermal transfer technique which are wax, wax/resin and only resin. Wax works great with smudge resistance and it’s good for matte and semi glossy paper labels. Wax and resin are good for smudge resistance, semi glossy paper and some synthetic forms too. Resin is scratch and chemical resistance and it good for coated synthetic CD labels

When a CD label maker is continuously working there are situation when the print might shift from the actual location and this may vary from label to label. To ensure perfect area where the print has to take place from the media high quality label maker have a sensor for this which detects the fault of gap, Line, notch perforation between labels. This allows the label maker to adjust the input of label stocks so that the printing is done properly over the labels without any error.

There are label maker applicators which automate the processing of label making. These systems are used commonly in industrial and warehousing area where requirement of label printing is done is mass. The software which runs on normal computers is built to create designs and formats for labels. This software supports the general operating system and the drivers of the machine.

There are label makers which print the label and same time encode them with a RFID (Radio Frequency Identification).It is like a barcode which is made so that humans are unable to read or encode the information hidden in it.

Encourage a Healthy Smile With a Healthy Diet

Your mouth is the first part of your body to encounter food, but is it the last place you consider when choosing your meals for the day? Nutrition should support your entire body, so choose foods that promote healthy teeth and gums. Not sure what those foods are? Read on to find out.

Balancing calcium and magnesium

You’ve heard countless times about the importance of calcium for strong bones, but are you as familiar with magnesium? Calcium and magnesium work together in the body by providing opposite needs. For bones and teeth, calcium keeps them strong and hard while magnesium supports the soft structure inside that makes them flexible instead of brittle.

Because of this relationship, experts recommend that you pair calcium with magnesium. Your body requires a balanced ratio of both in order to function properly.

Sources of magnesium include:


-pumpkin seeds



-brown rice

Sources of calcium include:

-dairy products like milk, cheese, and yogurt




Don’t forget about vitamin D

Calcium needs more to support it than magnesium- it also needs vitamin D to aid in its absorption. Studies have also connected increased vitamin D intake with lower levels of periodontal disease and tooth loss.

Sources of vitamin D include:

-leafy greens like spinach and kale


-fatty fish

-fortified milk and cheese

Getting enough vitamin C and coenzyme Q10?

Vitamin C is an essential component of the connective tissue that composes gums. It also functions as an antioxidant, destroying cells known as free radicals and thereby fending off inflammation and reducing your chances of developing gingivitis. Get your vitamin C from food sources instead of chewable tablets, as these supplements can cause erosion to tooth enamel.

Coenzyme Q10 works in a similar way due to its antioxidant properties. It combats the harmful free radicals that cause inflammation and ultimately may lead to gum disease as well as any of the conditions that have been linked to gum disease- diabetes, heart disease and high blood pressure, just to name a few.

Sources of vitamin C include:


-citrus fruit

-red peppers

-coconut water

Sources of coenzyme Q10 include:




-red meat

A properly balanced diet will strengthen your oral health. Healthy teeth and gums, in turn, support the wellbeing of the rest of your body, potentially limiting your risk for disease and reducing the likelihood of stroke and heart attack over the course of your lifetime.

Are Residential Parks an Alternative to Retirement Housing?

Where to live in your retirement?

Residential parks, are they the answer?

They generally allow over 55's to rent land for their homes to be sited on. Some park operators have different age restrictions but over 55's is the general rule of thumb.

Not only are Park homes usually cheaper to purchase than a standard bricks and mortar home, they are generally cheaper to run too.

These (mobile) homes nowdays are large and luxurious in their fixtures and fittings, often having more modcons than normal homes. Fully insulated and double glazed with up to date central heating systems which are more efficient and use less energy than contemporary systems. These homes can more often than not provide a large comfortable living space, sumptuous bedrooms, luxury bathrooms and superb kitchens which are cheaper to run that any normal home.

Some operators also provide cheaper electricity and water rates as they purchase the energy upfront at business rates, which translates into cheaper electricity and water rates for these customers.

Other plus points are:

You are living in a community of like minded people in the same age range, on a secure park close to local amenities with onsite park managers in the age range.
Safety, Security, Community. Retirement really can be fun, cost effective and safe.

Many Websites have very useful free information on all residential parks as well as links to manufacturers, other websites with retirement advice and more. There are many park operators and many manufacturers to choose from. The direct gov website has some great retirement advise with a section on park homes.

Can I get finance on these homes?

Yes – there are many many finance companies put there that specialize in this area. All these companies offer various services and plans to finance a park home purchase. Its worth shopping around to get the best deal for you. The top few finance companies structure finance to suit your unique circumstances and I would recommend one of these companies. BPHF actually also offer a part exchange service where you can part ex your current home to either fully or part finance your home. Others have slightly similar services but none I've seen are as competitive.

So are residential parks the answer to cost effective retirement living, for the most part Yes. Such a wide variety of homes from varying manufacturers and many parks from different operators to choose from. Ill let you make your own mind up.

Advantages Of West Facing House Plans

West facing house plans are ideal for people who like enjoying the setting sun. If you are wondering what a west facing house is, this is a house that is located on a plot with a road on the west side. One of the main advantages of the design is that it allows you to enjoy the warm evening sun. It’s believed that houses that face west bring more wealth and prosperity and the owners of these houses don’t have enemies.

In addition to people living in west facing houses being prosperous in life, they are also said to be extroverts and are loved by many people. They also make friends easily which helps them in their businesses and careers.

How to Design a West Facing House

As an architect you need to consider a number of factors when designing a west facing house. For ideal results you should avoid planning the house to be built on a T-shaped plot. This is because a house constructed on such a plot doesn’t look elegant. According to Vastu, a house built on a T-shaped plot diverts the positive energy in the house causing conflict in couples.

For the owner of the house to enjoy the benefits that come with this design, it’s recommended that you design the house such that the master bedroom is located on the south-west side. Vastu also recommends that the master bedroom should be located on the south-west side as the direction promotes better understanding among partners. You should build the children bedroom on the west side of the house while the guest room should be in the North West direction.

To ensure that enough sunlight gets into your house, you should eliminate any clutter that might be in the western side. You should also ensure that all tall trees are in the backside.

You should ensure that there’s less open space at the front of a west facing plot. When designing the house you should ensure that the main gate is located at the mid-west or northern half of the plot.

Experts recommend that the eastern and northern directions of the plot are the best for water storage; therefore, these are the best places to place the water storage tank.


As mentioned before, a west facing house is ideal for people who like enjoying the evening sun. While the evening sun is great to look it, it can sometimes be annoying especially when it slips into your house making it hard for you to watch television or work on your computer. To prevent this you should install blinds on your doors and windows.

Business Logo Design – Takeover

Barter System, the oldest exchange of goods for services and services for goods is still missed. Research reveals that the introduction of currencies aka ‘money’ is probably the reason why a poverty line was ever created. However an identity is always essential in order to alarm or alert the masses of a new or existing product. Identities have been consistent since the Mesopotamian ages! Right from hand prints in caves to that of the world’s first logo being a round disfigured metal with the Sun Lord of the ancient times.

For any business, large scale or small scale – an identity is imperative, its uncommon characteristics could forever ring in the minds of human beings if created with thorough research and produced with perfect amalgamation!

Choices – Peculiarity

Most decisions made while designing a business logo design are surrounded with minute timescales of delivery. This leads to an impromptu design which could either work – fail – or remain stagnant for the remainder of its life span. A design house or a designer would ideally need at least a week and a half or 12 days minimum for a unique and effective identity. Most images or visions are an epiphany of other trademarked logos that a conscious mind would preserve in his or her subconscious. Nevertheless, it’s all about creating that ‘exclusive’ image, which would not only correspond the specialty of an organization but also reveal the nature of the business in a split 3-4 seconds. Therefore, choice matters when selecting a business logo design.

Intuition – Fair play

Given the fact that time would be ticking, a designer would ideally have a research limited approach. After building rapport with the organization, an intuitive idea, vision or image would be produced within the subconscious already. Thorough research would only rule out the possibility of a ‘copy’, which would bear its own fruits in the future for the organization and the creator himself.

Nevertheless, an example of 10 versions would be the perfect approach to have archived while designing for one organization. Now you may conclude that this would help for revisions – Not exactly! For revisions there could be an additional 5 (meaning 15 in total). It is imperative that a designer has 10 different versions to tackle other trademark logos that could be found in the future after designing for a specific industry – as you may never know if a logo would just pop up in existence way before the organizations trademark application that you are working for.

Call it a back- up, but this would ideally shield your design from others & therefore set you apart!

Trial & Error – Management

The best bet is to have the design out for trial, either in black & white or just 80% complete with a shadow here and a veil there. This would attract the masses. For example, the New Kojima Productions created a logo for their video game. They first revealed a head. Then a week later, a full body logo! Then 2 weeks later at a grand ceremony for Comic Con, revealed a presentational video. Therefore, success truly lies in yielding a new design with only bits and pieces of it, in order to entice the target audience, tapping in to their curiosity and directly booming a brand even before its created.

For a business logo design, just adding a few shadows and veils to the current logo and having it out on a billboard (uneconomical) or a business card (economical) or a website (economical) would begin enticing the human vortexes of the masses who shed gazes upon your business logo identity.

It is from there you begin to understand that the design would not only work but could surge as it’s already communicated with the masses with hints of a complete new idea. There is ideally no loss to this technique as an organization would know whether their new badge is really worthy enough or not in terms of communication.

Colors, Fonts, Depiction – TIME

The field of business being vast, would limit the possibilities of a designer to use flamboyant colors and flashy font! Also inspiration of other fonts wouldn’t be the perfect step ahead. Hence, a professional font with subtle colors would be an exemplary choice, leading to an effective yet communicative business logo design. Most business giants tend to incorporate the national flag, the national flower, or the national animal and thus utilize colors associated with the same to reflect patriotism. This isn’t a bad idea at all. It would only show that you represent yourself as a brand identity in singularity with your country. Even for a startup or an existing organization, the use of Sans Serif or Comic Sans could definitely produce results beyond expectations.

Setting Up The Wood Lathe: Getting The Height Right

While many wood lathes these days are sold as portable models, most are considered to be stationary machines. As such they are mounted on benches and stands and left for in the same spot for long periods of time. In order for work to be performed well, comfortably, and without injury, the lathe needs to be at a proper height for long term usage.

As a general rule of thumb, start to determine the height of the lathe by standing comfortably with your hands by your sides and feet about shoulder width apart. Measure from the bend of your elbow to the floor. This is the height to make the center line of the lathe.

Now measure from the tip of the spur center to the bottom of the lathe itself, not the stand if it is on one. Subtract this from your elbow height and you have the desired height of the stand.

This is of course, a compromise. Every turner is a bit different with different heights and body types. However, over the years this has been a good starting point for wood lathe setup. It can easily be upset by manufacturers who supply stands with their lathes. A good idea is to stand at a lathe on its stand in the store and actually hold a tool over the tool rest to find out if that is comfortable and then ask yourself if it would still feel good an hour later after wrestling with a piece of wood.

It may be that the best avenue is not to get a supplied stand but rather to make your own. However this is not always possible or reasonable. Sometimes the lathe you want is only available with the stand, the manufacturer’s stand may be far superior to one you can build, the lathe and stand were a gift, the lathe and stand are integral or something else get sin the way.

There are two simple solutions depending on circumstance and these solutions are also usable if more than one person is going to use the lathe. The first is to raise the lathe by using pads under the feet of the stand or by adding support pads to the stand under the lathe so as to add height. While the height may be lowered by cutting down the stand this may be seen as a drastic measure and it is often easier and better to raise the floor area around the lathe with a low, wide and very stable box on which to stand. Above all, make sure the footing for both lathe and person is safe and secure.

Following these simple guidelines will give a goos start to lathe height. With experience do not fail to remember that persons and preferences differ and your preferred height of your preferred lathe may be different than someone else’s. The idea is to find what works for maximum health, safety and enjoyment.

Insurance Claim Supplements – How to Submit Claim Supplements

A claim supplement is a claim for additional repair or replacement costs. Supplements are commonplace in the claims process. However, if you are a policyholder unaware of your policy rights, you could be walking away from hundreds or thousands of dollars that you are entitled to collect.

Claim supplements usually occur after a policyholder submits a claim, gets paid and gets the repairs or replacements completed. Then, additional damage is discovered some time later.

Many people erroneously think that, once the claim is closed, it cannot be re-opened. And, insurance companies and their adjusters usually don’t rush to tell you how to submit a claim supplement. So, what to do? Let’s look at car insurance claims and property insurance claims.

For any kind of supplemental claim, you must contact your insurance company and give them your original claim number. The best way to notify the company is in writing, sent Certified Mail. That way, you’ll know who signed for the letter. The insurer will have to re-open the claim. You might get the same adjuster as before, but maybe not.

Car Insurance Supplemental Claims

Lots of supplements happen when cars are getting repaired. Many times, hidden damages are discovered when the body shop begins dismantling the car. So, while the insurance company may have issued payment to the body shop from the original repair estimate, they will issue a second check for the supplemental repairs. Happens all the time, no big deal.

However, sometimes post-repair problems don’t show up right away. A good example is the Air Conditioning system. If you have a car wreck in July, you might not notice that your heater is malfunctioning until fall or winter. But when any damages are discovered that can be directly related to the original insured loss, you can submit a supplement. Simply document the damages and their cause and send the supplement to the insurance company. No additional deductible is assessed, since you already paid it once.

Property Insurance Supplemental Claims

Homeowners, Renters or Business insurance claims can find a need for a supplemental claim for some of the same reasons found in car insurance claims. Seasonal issues can bring up damages related to the original loss. But, some other issues might present themselves. You may have an expert’s report that shows additional damage attributable to the original loss. Your contractor may have found hidden damage that must be repaired. In any event, carefully document your claim and submit it to the insurance company.

Be sure that you are collecting all the money you are entitled to collect. Use supplemental claims whenever your claim requires it.

If you have experienced a property loss, whether fire, wind, flood or other, you need to know winning insurance claim strategies. The insurance company will not tell you the claims process, but I will. I will show you how to take control of your insurance claim, and add hundreds or even thousands more dollars to your claim settlement. For more information, go to the website listed below.

Message of the Universe: When One Door Closes, a Thousand More Open!

“It’s not just that when one door closes, another door opens.

When one door closes, choirs burst into chorus, orchestras orchestrate, bugles bugle, marching bands march, dogs catch Frisbees, cats “chow, chow, chow,” pigs fly, and 10,000 new doors open.

Kind of makes you want a door to close, huh?


The Universe”

Many have heard this say before: “when one door closes, another one opens”. It is partially true when it comes to closing a door, but you will need to take into consideration that many others are available to you in your lifetime. There is NOT one other door out there, there are plenty of doors for you to choose from. When you close a door, you close the past and move forward. You focus on the things that are happening today and not yesterday. What’s in the past stays there, so no need to focus too much on it. You can’t change it anyways, so what is the point. When you look at your life, depending on what you do today will have repercussion on your future. I have never seen seeds planted and grow the day after. It takes months of work and attention to make the crop flourish. This is what you need to do with all of your opportunities. Work on your dreams, pay attention to all the details, focus on what you need to do today so you can take advantage of a better life tomorrow. Looking ahead is important but as we all know, even with the best planning, things do not pan out the way we expect it to be. Changes occurs, existential circumstances render results that are not always to your advantage. Will you let that depress you or bring you down? Will you let bad news bring you down to your knees and keep you there permanently? I hope not. When events do not happen the way you want, that means that BETTER is coming along. The Universe knows that more is yet to come.

We are all humans and we get affected by the good and the bad. We strive for a better life but s%^t happens. We have to deal with it and move forward. It is important to master that part of your life. I am not saying to stay passive with every event that is happening, assertiveness is very important, and you need to go for what you believe in and not just accept things the way they are. You want to pursue your dreams, work hard at it, make a difference and do not stop until it happens. Even if you put in all the hard work, it might not pan out the way you wanted. Should you jump off the Golden Gate bridge because of that? Absolutely not. Regardless of the outcome, you opened other doors that offers better options and grander exciting results compare to the original. Always walk with your head held high and look into bettering your life at every occasion you have. If you are worried about what others will think of your failure? Well, have you thought of NOT SAYING ANYTHING to anyone in the first place? If no one knows what you are doing, no one will know where you failed. Learn to keep things to yourself until the jackpot hits. And if it doesn’t, this little secret will stay with you until you die.

Bulges, Popcorn Ceiling Removal And Shadow Lines: Tips And Solutions

Common ceiling treatments include popcorn ceiling removal, treatment for joint shadow lines, treatment for dark areas and others. Some of these treatments can be addressed with DIY efforts. Learning the difference between various treatments allows homeowners to get a better view of what is required of them.

Joint Shadow Lines

Drywall ceilings can develop lines on their surfaces. This problem occurs because of a lack of insulation on the top of joists. The joist tops are exposed to low winter temperatures. The wooden joists are not effective insulators and there is a temperature difference between adjacent parts of the ceiling. The difference helps to create the appearance of lines. Condensation occurs because of the lower temperature: dirt and mold become trapped in these wet spots and shadow lines are produced.

Solutions exist even for problems which seem as insurmountable as this one. Homeowners can address this problem. A special paint can be applied to the ceiling and followed up with repairing the insulation on the joists. This insulation should fill spaces between joists in addition to covering those wooden tops which were previously left uncovered.

This treatment, while intricate, can seem less daunting than the task of popcorn ceiling removal (cottage cheese or acoustic ceiling removal), which can include testing the surface through the help of a laboratory and then contacting an asbestos abatement company in case the samples prove dangerous.

Bulge in Plaster Ceiling

Older homes with plaster ceilings may contain bulges which concern homeowners. In older homes, plaster was applied over metal, wood or gypsum lath in order to coat walls and ceilings. Vibrations and water damage to the roof may interact with the substances applied in the plaster placement process. Layers of plaster coating can cause the plaster to break away from structures within the surface and a bulge is produced. A lack of heating can cause even the finish coat to create sags in the wall.

Two methods for repair are available. The DIY method, applying plaster washers, may appeal to homeowners wanting to fore-go the cost of the alternative: contacting a plaster contractor. Valuable resources point to an important difference between a plaster contractor and a drywall contractor, indicating that choosing the inappropriate repair business is a common mistake.

Obviously, the DIY method could entail steps which surpass those involves in popcorn ceiling removal. Yet, if a contractor is involved, popcorn ceiling removal could still equate to more errand work for the homeowner than this treatment would create.

The Benefits of Display Mannequins

Mannequins are primarily used in stores to display clothing. A display mannequin is usually a full-size dummy in the shape of a person. A display mannequin will normally include all parts of the human body including a head and feet. Display mannequins can be made of several different materials, including fiberglass, wood, plaster, or wax.

Nearly every clothing store has at least one display mannequin. They are commonly found in the front windows of stores at the mall to show off the store’s newest fashions. Display mannequins must be life-sized in order for the clothes to fit well over them. Most mannequins are full figures including the head, torso, arms, and legs, but some are only a torso. These types of display mannequins are perfect for saving space while modeling shirts and blouses. The full-size mannequins do take up more room, but they are more versatile in that they can be used to display entire outfits including hats, shirts, pants, and shoes.

Display mannequins are usually modeled after people who are physically fit. People are more likely to view the clothing favorably if it is displayed in a flattering way on the model’s physique.

A display mannequin can be made of several materials. Many are made of fiberglass. These mannequins are durable and easy to mass-produce. Other mannequins are made of plaster. Plaster mannequins are easier to break than fiberglass models, but are still useful if handled correctly. Wooden mannequins are less common than plaster and fiberglass mannequins because they take longer to make. They were much more common before plastic manufacturing caught on. Wax mannequins are rarely used to display clothing for sale in stores, but are often found in museums.

Display mannequins are a great way for stores to show off their clothing. Shoppers get a good idea what the clothes will look like on a real person when they see them on a display mannequin.

The Advantages of Floor Lamps

You can use different kind of lightings to light up your homes. Most people use the chandeliers, tube lights or bulbs while some use the ancient method of candles, especially those who live in remote areas where the electricity is scarce, to light up their homes.

Whatever be the method, the ambience created by the lights placed in the rooms additionally is always different. While a soft light creates an atmosphere of peace and elegance, one may have to look at bright lighting for places like study where you need a lot of lighting. The use of the lighting depends on the usage of the room in question.

Lamp is the most widely used method to add extra lighting. It can not only change the way your room look but can also help you in filling up some blank spaces. Floor lamp is one of the many kind of lamps that can be used for this purpose.

Various designs in floor lamps can be used to enhance the beauty of the room and it also blends well with the other furniture. The flexibility is also high as it can be changed very easily. You can just replace the shade of the lamp, shift it to a different location, change the bulb and get a new look altogether.

You can get floor lamps in different shapes and various sizes. There are even a variety of styles to opt from. Craftsman, Art deco, Tropical, Contemporary, Traditional, Country, Retro, Mission, Rustic, as well as Mission are some of the popular styles that are available. Halogen and incandescent are the lighting elements one can get in these floor lamps. Either of the Utility lighting, spot and ambient lighting could be the purpose of lighting. The textures are also available in varieties like glass, common wood, etc.

When compared to the other sources, floor lamps are easy to move from place to place. One can just pick these and plug it in a different place. For those who have the habit of changing the furniture around can opt for these lamps. The installation is also easy as you can buy the lamp and fix it where you want.

There are certain factors one needs to think about when they purchase a floor lamp. The different factors being the lamp switch, the space to be used, the usage of the lighting. You can purchase them both online and offline.

6G Welding: What Is It? It Is The Highest Paying Of All Welding Positions – Make $100K A Year!

What Kind of welding job pays that kind of money? About 5% of welders are certified 6G code welders. 6G is pipe welding – in fact it is the test for: “All-position pipe welding.” The skill test is to weld two pieces of pipe together which are mounted in a fixed position, at 45 degrees. Because you are welding a round object set at 45 degrees, you are proving your ability in every conceivable position. The weld quality must be very high, because replacing poorly welded pipe joints in a power plant (for example) is very expensive.

How much CAN a 6G Pipe Welder make?

Wages have gone down during the slow down. Not that long ago a “rig welder” (a welder with a welding machine on a truck) in Alberta, Canada would average $330,000 a year, but times are hard, so it is roughly half that much now. Off-shore oil rigs employing 6G welders are paying about $100k a year right now.

There are very few trades in life which are purely “skill based. In other words, the possessor of the skill is highly paid simply because they can perform the skill (think of a tight-rope walker in a circus). Most high paying trades or skills require specific schooling, plus proof that you can actually “do the skill”, and rarely will the skill require hand-eye-brain coordination to the degree of a tight-rope walker. 6G pipe welding IS a skill like tight rope walking – it requires dedicated, correct practice. Like tight-rope walking, 6G pipe welding also does not require any specific education or graduation certificate in the USA. No one cares where you went to school, or IF you went to school, as long as you show up and you really can weld that pipe joint like walking a tight rope! If you are good at this ONE position, you’ll be put to work. No one CARES where or how you learned the skill and no one cares if you don’t know another thing in this world!

Can imagine this? Imagine a room of 100 of the most highly skilled structural welders (typically union iron workers, working on large building frames) and 100 CWI Welding Inspectors (the best of the welding inspectors, with vast welding book knowledge) and ONE uneducated, illiterate but certified and very capable 6G pipe welder… And there is an urgent need for someone to weld a high pressure pipe joint on a 6″ schedule 40 carbon steel pipe – guess who would be the ONLY person in a room of 201 people who could do it? That’s right, the pipe welder, even though the pipe welder can’t READ!

Anything worth having requires focused work. What do you think a heart surgeon concentrated on learning while in school? That’s right, heart surgery. Focus on the one thing that will make you money and burn it up like a laser beam! OTS! “Own The Skill!” Be careful NOT to waste time, money and effort on things which will not ever make you money, or which will make you very little money! DO what others are unwilling to put out the effort to master.

Is getting really good at 6G pipe welding as hard as walking a tight-rope in the circus? Most people who fail to learn 6G fail because they think they can do it with very little practice. Intense, concentrated and coordinated practice is the biggest secret, just like with learning to walk a tight-rope. There are a few other secrets.

Welding school may be fun, but here’s what happens to 95% of welding school graduates: They learn all the basics in a year or two of school. They NEVER get to where “The Powers That Be” will allow them to learn to weld pipe. They run out of money and time. They end up running a MIG machine in a trailer factory for very little money, or at BEST, they end up as an iron worker on big-building construction. However, not many big building are being built these days, are they?

What IS happening? Shale gas and oil has been discovered and is being developed all over the USA. The first of 40 new Nuclear Power Plants is under construction. What will soon be in super high demand? 6G pipe welders, that’s what! You can find schools for 6G Welding. You may be able to government help to get your training. Get started! Just Google “6G pipe welding schools.”

What should you do next?