10 Things To Remember When You Buy Modern Lamps And Lights

Figuring out the right kind and amount of lights needed for your home can be a major decision in your home décor. The decision can either make or ruin your entire style and the effect the space projects. So, what are the things to look for when you buy some modern lamps and lights for a home or office space?

  1. Decide the where: the first item on the agenda is to decide where you want the lights. What areas will require special lighting, which areas should have more diffused brightness, which areas need focused attention? Asking and answering these questions is the first task.
  2. Decide the why: part of buying the right lighting is to decide the task that each lamp is intended to help. Choose a focused task light for concentrated jobs like reading or cutting. Track lighting is fine for a sitting room, whereas spot lighting and accent lamps help to bring out interesting décor.
  3. Decide which style the room needs: while a stylized modern lamp or a glitzy chandelier might be just right for your living room, the kids' room is probably better off with a lamp in animal shapes. Paper lamp shades work great for interiors, while modern lanterns and metal work looks better outside.
  4. Design specific lighting for special-needs areas: the kitchen for example, will need more task oriented focused lighting, especially around the counter top areas or the stove / grill area. Your study would look and function better with modern desk lamps, and living rooms will require a combination of lighting styles.
  5. Use mood lighting: set the mood with warm lighted corners, especially in your living room. You can achieve this effect by the judicious use of LED lamps, fireplaces, candles or other ambient / dynamic sources of light. Look around at your furniture, furnishings, and overall scheme of décor, and choose a lamp or fixture that looks good in setting the mood you have in mind.
  6. Coordinate: make sure the fixtures and modern lamps that you use go with everything else, in the rest of the room, not just in style, but also in color.
  7. Choose easy to clean lamps / fixtures: although most modern lighting emphasizes simplicity of design, some can be quite complicated and difficult to clean on a regular basis. Make life easier for yourself, pick something with simpler lines, that will be easy to clean in the long run.
  8. Try energy efficient styles: "go green." Use energy efficient fluorescent lighting in all possible areas, except it demands something else.
  9. Avoid glare: make sure the light fixtures or lamps are properly installed to minimize glare and give a nice all round effect of warmth.
  10. Use portable lighting: floor lamps, etc can be a source of additional light wherever and whenever you may require it.

A little thought, and a little planning. That's all it takes to make your space a haven of peace and a reflection of your sense of style.

Tools and Steps for Removing Hardwood Flooring

Although hardwood floors should last about 40 years, in the real world things happen to damage it over time and sometimes it becomes necessary to remove them. Whether you are interested in removing few pieces without damaging it or to go for hardwood flooring demolition, it will depend on a few factors such as the following:

-Was the original installation done well?

-Is it a floating hardwood floor or one that is glued down?

-What type of floor will you be installing after removing hardwood flooring?

List of Tools

Circular Saw – You’ll need a circular saw for when you need to cut into the floor.

Chisel – You never know when you’ll need to get into a tight groove or push through some glue.

Claw Hammer – When floor panels are stuck up next to a wall area, you’ll need a claw hammer to grab, pull, and rip them out.

Flooring Scraper – The only way you’ll get through a lot of glue is with the flooring scraper.

Pry Bar – These are a necessity when it comes to picking up floor panels that are stuck.

Sledge Hammer – When nothing else will get through, you can always count on your sledge hammer to bust things.

Before removing hardwood flooring It is important to understand what kind of flooring was used and how it was installed before you begin removing it. This will help you choose the right tools for the job.

If you aren’t trying to preserve the wood, do some pre-cuts with your circular saw to make it easy to get started. These should be 1-2 feet areas. If you were not sure how the floor was laid before, you should know after doing this. Make sure you don’t cut down into the foundation.

Steps for removing hardwood flooring

1. Hit each area of the floor with the sledge hammer enough to break things loose, but not so much as to break the foundation.

2. Use your pry bar to lift the panels and panel fragments up off of the foundation. You may find that it is easier if you use the tongued areas of the panels to pick them up out of the floor. Also, if you pull the panels out individually and stack them as you go, you will save a of of cleanup time and may leave the surface area better preserved for installation of the next floor.

3. If there is glue stuck beneath where the panels were, you need to scrape it up with the flooring scraper and the chisel as needed.

If the floor you have removed was glued down, it may be quite a task for you to get your mess cleaned up adequately. In this case there will be glue fragments and stuck pieces of glue that could take hours to clean.

Saw dust and tiny pieces of wood are usually everywhere. If you have a sturdy vacuum you can save some time, but you’ll likely be finding things to clean up manually that will take you quite a few hours to complete.

Building a Lean and Muscular Body – You Do Not Need Steroids

In most gyms, there are fancy machines. Machines build especially for training specific muscle groups. If you are a beginner, and you never have lived a weight before, these machines can be very good to get you in shape. However, if you have been bodybuilding for at least three months, stay away from the machines. You will get much better results if you use free weights as much as possible. This is because when you are lifting a dumbbell, you are using all those little muscle around the joints to stabilize and balancing the weight.

The most important thing to remember when training with free weights is to make sure your form is right. You should be able to do the exercise slowly and controlled, without bending your back or doing other odd movements. If you can not do this, then you are training with to heavy weights.

It is very important that you focus on doing things right. An injury is the worst that can happen to a bodybuilder. Even small injuries can take as long as three months to heal, and in all that time you can not workout properly.

Arnold Schwarzenegger once said that the one thing that really makes your muscles grow is the last rep. The one you take, even though you feel you can not take another. Push your body out of its comfort zone, but remember to relax and reconstitute. Your muscles does not grow in the gym, they grow while you are relaxing.

If you are serious about creating the body of your dreams, you should get hold of a good workout program with a proper diet plan included.

Attraction – The Power to Ride Alternate Time Lines

Please never lose sight of the fact that this idea of ​​"alternate time lines" is only a model of reality. The model is not the real thing, nor will it ever be.

This is true of every model, by the way. When physicists speak of electrons and neutrons, photons and positrons, we're tempted to assume they're describing – precisely and exactly – the chunks that make up the physical Universe around us.

But they're not describing reality. Those learned men and women are telling us about their best theories. They have drawn up models – maps – of the Universe around us, but their maps are constantly being redrawn, reworked and revised to accommodate new discoveries.

And the techniques you¡¯re learning in your Law of Attraction work, of using alternate time lines to create a better life for yourself, well, they're a model also. A map. A picture that accounts for most or all of the observed phenomena around us.

But the map is not the reality. It's only a working tool.

When you set out to take a vacation, you look at your map, you study it closely, but you do not try to take your vacation on the map. You only use the map as a reference to help you navigate through reality.

And these alternate time lines are the same. They're your map, and you can be using them to get where you want to go. But whatever you do, do not try to live your new life in your map. That's what you've got reality for.

Mentally rehearse new scenes. Imagine you and your newfound love dancing the night away together. Count all the money you're going to receive soon. Preview your healthy body as you see yourself being healed. Anticipate the respect and admiration in the eyes of others when you achieve the success you rightly deserve. Yes, spend enough time there to bring it into reality, but do not make the mistake of spending all of your time in your map.

I'll talk about this in another article, but for now just let me urge you – be ready to balance inner work with outer work. They're both necessary. Neither will accomplish the entire job alone.

Brother Laser Printer – Fax & Brother Multifunction Printer Error Codes & How to Fix Them

Brother offers an endless selection of fax machines, printers and multifunctional printers. However, the list of common error codes found in them can confuse even the most experienced troubleshooter. Here we explain common errors and how to troubleshoot them.

Error code E50: Fuser unit damage

This can happen either when the heat roller has been destroyed or damaged. Make sure to replace your Brother laser printer with a new heat roller.

Error code E51: Fault with protection in the laser beam

This error code indicates that the beam, mirrors or the lid is not sorted properly. Make sure to adjust these in order to get your Brother laser printer back working again.

Error code S05: Error with data bus

This type of error code means that the data transmission on the parallel port is affected. Most of the time, this problem can be handled effectively by just resetting your printer.

Error code 'machine error': board issues

This kind of error code will usually be indicated with a loud continuous beep on your Brother Fax machine. You need to check on the solder joints to see if these are cold over the power supply place. You also need to check for these joints on all other boards before you go for a replacement. If you find no improvement even after replacement then try changing the capacitors over the board for the power supply.

Error message 'Black pages'

This error code typically imposes black pages being printed out on your Brother laser printer. This usually happens frequently on the Brother 960 and Brother 1260 model varieties. It means that the HVPS is at fault. You will need to replace the following diodes and put jumper wire instead. Diodes D31, D33, D30 and D32 will need replacement. For the jumper wire you will need a gauge of 22.

Error message 'Check paper path'

The error lies with the paper path which can be rectified by taking out paper hopper. Then simply clean the eject rollers of the paper.

Error message 'Cutter problems'

This type of error message gets displayed when there is either a paper jam or the device is not cutting paper properly. You need to check if the cutter spring is defective or not. Make sure to take out the cutter and clean as well as lubricate it. In case the issue does not get solved try replacing the gear train.

Error message 'Poor copy quality'

Sometimes you may come across some gray colored dots on the paper you have just faxed. Make sure to check if the glass and the scanning mirrors are clean. If these are clean then the issue lies with the camera. You could try troubleshooting by just unplugging the Brother Fax machine for at least a whole night. You might just avoid having to shell out on a camera replacement!

The Basics of Video Transcoding

Video transcoding is not a very easy subject to dive in, it often requires many calculations in order to figure out the compression method to be used, the codec, the bit rate, audio compression and many others calculations related to video encoding. The first step is always to try to figure out where you are going to be using the video, will you be streaming it on the web? or perhaps played it back on your high-definition device? — according to your answer you will need to to select different settings in order to optimize the quality and size of your media.

The Format:

Depending be type of hardware that you have you’ll need to change the format or container you will use to transcode the video in other words, you will need to choose among Audio Video Interleave also known as AVI, Matroska (MKV), Windows media video for WMV, Motion Pictures Experts Group or MPEG or any other type of container which comes to mind is compatible with the tools you have.

The most popular formats are obviously the oldest ones, these are AVI and MPEG, some people might even argue that the Windows media video format should be listed as a third however choosing among these multimedia containers is up to you. The utility you can achieve with each and every one of these will be and look different for instance, you can use different codecs in order to optimize an AVI stream using a low bit rate and keeping small file size, if he decide to use MPEG-2 your file size will go much higher because the video bit rate will be higher as well. You need to keep in mind that there is a direct correlation between the great and file size.

The Tools:

In order to edit your video streams you will need to use many tools which will allow you to merge, split and enhance the appearance of your multimedia file, among the best tools to use are: virtual dub, TMPEGenc, Adobe Premiere, Windows movie maker, Sony Vegas, Ulead Studios software, and many others.

The tools mentioned above will help you edit the video and even do some encoding to each media stream, virtual dub and Dr. DivX are two of the best tools available to transcode video into DivX or any other format, other tools you can use include auto guardian knot also known as AutoGK, bbMPEG, AVI2VCD and many others.

Once you have decided which format to transcode your video on and which tool to utilize you will need to do further research in order to tweak and adjust the settings of the codecs in order to achieve the results desired.

Persuasive Writing KS2 – 5 Things to Remember

If you're looking for some quick fire tips for success at persuasive writing ks2 level, then look no further. Here are the five you need to ensure work gets completed to the highest possible standards.

For starters, use the introduction properly. A lot of students make the mistake of jumping head-first into discussing points and bombarding the reader with evidence and statistics. Make sure the first paragraph is a clear introduction of the point, the writers stance and go from there. Make sure there are at least three of four relevant points in any persuasive essay. There's no set amount you should include to achieve higher grades and quality is more important quantity, but three points is a good minimum to work towards, especially in timed exams.

Each point should be presented in the same format in persuasive writing. Firstly, make your point, and then present your evidence to support your point and then finish by tying the two together to hammer home your point of view.

Persuasive writing ks2 level requires some stylistic elements to achieve higher grades. By this age, students need to be able to attract their reader, hold their attention and demonstrate a sound knowledge of persuasive language.

Finally, the conclusion of any persuasive writing essay needs to be strong. It's a writer's final chance to leave a lasting impression on their reader, and is the thing people marking the work will remember most. Students should make sure to repeat their main point and tie everything up with a strong final sentence. Persuasive writing can seem quite complicated to many students at ks2 but when it's broken down into a simple structure, it's much easier to digest.

Let Cupid Help You Point the Arrow in the Right Direction

I recently read the cover story of USA Today. It says 14 million Americans are struggling according to a study by Gallup and Healthways, a Tennessee based health management company. It also says that “the concept of the American dream reflects aspirations for the long term that have endured through good times and bad, but not indestructible.” The findings also “underscores the task of maintaining the sense of possibility that has marked the Nation since it’s founding.” I have been a single mother for 13 years.

For me, pursuing the American Dream means that I believe in the possibility of achieving something. If someone’s heart has been struck by Cupid’s arrow, that person will pursue the other until he or she gets its heart’s desire. The heart’s love is providing the fuel to passionately pursue. I luckily have always been an optimistic person even when obstacles come to greet me.

My income as a real estate broker has dropped dramatically in the past two years. I am one of those 14 million Americans struggling right now. But I refuse, at 48 years old, to give up on my dreams and future possibilities. An arrow once drawn goes only in one direction. when it comes to a dream for a better life, that arrow better be filled with the right fuel. That fuel is love of what you are doing. I always have loved the real estate business. I have sold commercial and residential properties.

Because of my finance education, I love the number crunching when it comes to analyzing buildings. On the other hand, when it comes to helping someone find their dream home, it gives me great satisfaction of seeing a family settle into their home. Home after all is where the heart should be and the safe haven of nurturing the people we love the most- our family. I still have my 16 year old son at home with me. It has been difficult to juggle the two roles of breadwinner and nurturer. I always chose nurturer over breadwinner.

So, I may have given up pursuing certain real estate deals or creative projects because my arrow was mainly pointed at raising my son. The good thing is that income always flowed even through a divorce and a subsequent car accident that left me unable to walk for almost a year. My current struggle due to my profession as a real estate broker has not stopped the arrow pointed in my home. My son needs me less since he is now a teen and in just a few years, he will be off to college. Now, my arrow can be pointed in a new direction. I feel the struggle of homeowners because I myself, don’t know if I can stay in my home.

So instead of shutting down my heart and spiraling into depression, I am now asking Cupid to lift me and awaken my heart to pursue all my dreams that may have been temporarily put aside because I chose to nurture my son over being a breadwinner. I am so happy I made this choice because my son is the greatest blessing in my life. Hopefully now, as Cupid helps me to awaken the dreams hidden in the recesses of my heart, the arrow will lead me to the right place. I know then that soon enough, the income will follow. The love I have for my son and the future generation provides me the fuel.

Acrylic, Melamine and Tritan, Oh, My! Five Tips to Help You Find the Perfect Plastic Tableware

If you’re shopping around for plastic tableware, you’ve no doubt seen that plastic glasses and dishes come in a vast array of styles, types and even qualities these days. Since each promises a different set of features and benefits, choosing the right plastic tableware may seem a daunting task. But don’t despair! Here are a few tips to help you decide which type of plastic best meets your needs, and how to know exactly what you’re buying.

Tip 1 – Don’t just shop for “plastic,” because not all plastics are created equal:

So true! Ever had indestructible plastic glasses that last from year to year, while others break the first time they’re dropped? How about plastic dishes that scratch like crazy after a few uses? What about plastic plates that overheat after just seconds in the microwave — or glasses that clouded in the dishwasher?

Though frustrating, these common issues aren’t really defects in the plastic, they’re just differences. More than a half-dozen types of plastic are used to make tableware – from unbreakable Tritan and budget-friendly SAN, to scratch-resistant Melamine and decorative Acrylic. Each offers its own benefits and drawbacks.

Knowing how different plastics perform and how to tell them apart when shopping can ensure that the plastic dishes, glasses and serving pieces you choose best meet your needs. Tips two and three will help you do just that.

Tip 2 – Decide on the features that matter to you before shopping:

Shopping for plastic tableware would be a cinch if a single plastic offered it all -unbreakable, scratchproof, dishwasher and microwave-safe. Unfortunately, that plastic is not yet invented. So of the plastics that do exist, which option is right for you?

Do unbreakable, dishwasher-safe products top your list? If so, spending a little more on unbreakable Tritan or Polycarbonate plastic items is well worth the years of use you’ll enjoy. For a little less, SAN plastic products are almost as durable, and casual looks in Polypropylene are equally durable and very inexpensive. Avoid anything in Acrylic or Polystyrene.

Are scratched dishes your pet peeve? Then Melamine dishes are your best choice for long-term satisfaction. But you’ll have to forego the convenience of microwave heating.

Are microwave-safe dishes a must? The selection is slimmer, but there are some choices in plastics made specifically for the microwave. Look for dishes under the brand names Nordic Ware, Miracleware and ExtremeWare – and avoid products made from Melamine, Acrylic and Polystyrene.

Are you drawn to decorative or themed dishes? Trendy designs and seasonal themes are widely available in plastic tableware. Very decorative glasses are generally crafted in Acrylic, but be prepared to hand wash to keep them looking their best. You’ll also find plenty of decorative and themed designs in durable easy-care Melamine dinnerware.

Is cost more important than longevity? Inexpensive seasonal Acrylic and Polystyrene tableware is plentiful on store shelves. But with plastics, you do get what you pay for. These low-cost styles won’t hold up under impact or in the dishwasher for much more than a season or two.

Tip 3 – Know what you’re buying – even if the label doesn’t tell you:

You now know that the plastics used to make tableware vary indeed, and which type best meets your needs. So how do you tell if a plastic glass is made of SAN or Acrylic? How do you spot Melamine dishes? And what the heck is Polypropylene, anyway?

If shopping online with a reputable seller, product information will include plastic types, features and care. If it doesn’t you may want to shop a different site as the seller may not know, or stand behind, their product. In-store shopping can be a bit trickier because not all plastic products are clearly labeled by type. There you’ll need to know a bit more than the label tells you.

Unbreakable products in Tritan and Polycarbonate plastic are easy to identify because they’re generally labeled as “Unbreakable” and “Dishwasher-safe” to offset their higher price tag. Tritan items are also labeled “BPA-free.” Both plastics are generally found in glass-like clear or tinted drinkware and dishes.

Unbreakable, dishwasher-safe products in Polypropylene plastic are easy to identify, too. They’re always opaque or semi-opaque, think Tupperware, and have a rubbery feel unlike any other plastic. These products also tend to be low-priced.

Labeling on Melamine dishes varies, but that’s not a problem if you know what to look for. All melamine dishes are opaque – never see-through – and have a rigid feel. Because of melamine’s durability and scratch-resistance, it’s the most common plastic used to make dishes and can be found in a huge variety of colors and decorative designs. Melamine dishes are dishwasher-safe, but not microwave-safe, so melamine dishes are almost always marked “Not Intended for Microwave Use.”

Plastic dishes and cookware made from microwave-safe plastics are always clearly labeled “Microwave-safe” because that’s their major selling point. These items are always dishwasher-safe and sometimes oven-safe, too.

Glasses and dishes made from Acrylic, Polystyrene and SAN plastics are rarely labeled by type, but you can tell them apart. Though shatterproof, they’re not truly unbreakable, so you won’t see that on the label. The major difference is the care. SAN plastic products are dishwasher- and microwave reheat-safe, and usually labeled as such. Polystyrene products are generally labeled “Top Rack Dishwasher-safe,” while Acrylic products are almost always “Hand Wash.”

Tip 4 – Care matters! Enjoy your plastic tableware for years:

As plastics differ so does their care, but you can extend the life and looks of even the least expensive products if you treat them right.

In the dishwasher, a good rule of thumb for any plastic glasses – even those marked “Dishwasher-safe” – is to wash on a normal, unheated cycle. Some dishwashers heat water excessively in certain cycles, so a normal setting is always the best bet.

Items labeled “Top Rack Dishwasher-safe” should be placed in the top rack, away from the heating element at the bottom – with one exception. Some Melamine dishes are labeled “Top Rack Dishwasher-safe,” but they won’t fit in the top rack. These are fine to wash in the bottom rack on an air-dry setting.

Items labeled “Hand Wash” really should be washed by hand. These products will quickly crackle or cloud if exposed to dishwasher heat and detergents.

Abrasive cleaners or scrubbers should not be used on any clear plastic glasses or plates as they will, without exception, scratch. Melamine plates hold up to most scrubber sponges.

Tip 5 – Ignore the #7 recycling symbol – it doesn’t identify specific plastics:

Last, save yourself some shopping frustration. Don’t rely on recycling numbers – those little numbers in a triangle on some plastic items – to identify plastics. In fact, these numbers don’t even appear on many plastic tableware items. Why? It’s simple, they’re not disposable.

Recycling numbers, officially known as SPI codes, are intended to identify commonly disposed plastics so they can be efficiently recycled – that’s all. The #7 code is a catchall number used for the non-recyclable plastics – and that includes many plastics used to make long-lasting tableware.

Contrary to some media stories, the #7 code does not denote an unsafe plastic. Anyone suggesting that all plastic items with the #7 code are unsafe because they contain the chemical BPA simply did not do their homework. Most good-quality plastics, including Melamine, Acrylic, SAN, Tritan and even biodegradable Eco-plastics all fall under the #7 code, and not one of them contains BPA.

Polycarbonate is the only tableware plastic that contains BPA. If media reports on BPA concern you, just avoid polycarbonate products. Products made from Tritan plastic offer the same benefits as polycarbonate, without BPA.

So whatever your tableware needs, from unbreakable plastic glasses for outdoors, to durable dishes for everyday, to decorative styles inspired by the season, there’s surely a plastic available that meets your needs. Armed with these tips, you shouldn’t have any problem finding it.

Should You Stay Away From Plastic Surgery?

It seems that, these days, there is a constant barrage of images in magazines and on TV of women with perfect physiques making the rest of us feel like we are somehow deficient if we do not look like that. It is no surprise that this could lead some women to consider plastic surgery as a solution to an inadequate social life, or as a means to get back an old boyfriend. While it is true that a successful procedure can have a positive impact on a person's life, going into surgery for these reasons often leads to bitter disappointment.

Surgery should only be considered by those who are being very realistic about what it can accomplish, are in a good position psychologically and have the time to devote to the recovery. These procedures are most definitely not recommended for people who are under stress or going through traumatic periods in their lives.

Surgery is also not recommended for anyone who feels surgery will solve their problems or make them look like a movie star. Before you ever have anything done, you need to examine your own motives and make sure that you are not trying to look like some ideal version of yourself.

There is always the potential for depression after surgery, if you are not happy with the results due to unrealistic expectations. Of all the patients who are disappointed with their surgery, many of these were doing it for the wrong reasons and were in a hurry to get it done, so they did not research all their options first. Not doing research means that they did not find out what would be the best procedure and they may have committed to the first surgeon they talked to.

Remember that you will have to live with the results of surgery for years to come, so it makes no sense to go into it for the wrong reasons or without doing sufficient research. I have found that there are several plastic surgery surgeons qualified to do my procedure and there are probably in your area also. Among the clinics I found there are also a few liposuction surgeons that specialize in the procedure I am looking for, so make sure you check for specialists in your area too.

How to Document a Project Plan: The 10 Elements of A Good Project Plan

One of the largest issues that a new project manager faces is how much to write in his project plan. Of course, the actual amount and depth you need will vary from project to project and and with different types of projects. So will the emphasis you place on each of the sections. One of the first tasks that you need to perform as a project manager is to determine the required depth and emphasis on each element.

In this article, I'm going to identify the ten sub-plans you need for your project plan. Each of these is effectively a complete plan on their own. In some cases, you will need to develop the plan during the project planning process itself. In other cases, you should be able to adapt a predetermined plan and process.

1. A plan to manage risk events.

This is probably the most important of the plans. Not everything that occurs within a project is certain. Some things can be predicted to be possible. Yet other things can not be predicted to occur at all. Regardless, these uncertain events (called risk events) must be managed. Where possible they should be avoided or encouraged. Plans should be in place to mitigate or take advantage of them should they occur. One of the mistakes that new project managers often make is they focus on the negative. The result is a project plan that focuses on mitigation. However, risk also can result in a positive result. A risk plan should include processes and plans to take advantage of when risk events are in the project's favor.

2. A plan to communicate.

One of the major reasons for project failure is a break in communications. Every project needs a plan to ensure that appropriate communications between the project team and the various stakeholders occurs. This includes within the team itself. It also includes between the team and the sponsor and management team. And it includes between the team and the clients and ultimate beneficies of the project. However, it also includes communications between the team and others affected by the project. This can include such diverse groups as the general public or the families of the project team.

3. A plan to manage change.

Change is a reality. Especially when it comes to a situation as filled with unknowns as a project. When the project begins, most teams are not as aware of needed information as they would prefer. They are forced to make educated guesses. However, as time continues information is collected. As a result, it is often necessary to revisit the previous decisions and produce new plans based on improved information. In addition, other changes may occur within the environment which necessitates changes made to the project. A change plan is mandatory to ensure that the project does not become something it was not intended to be, and yet allow it to vary as needed. The plan also needs to ensure that exclusive oversight is maintained.

4.A plan to manage quality.

Quality does not just happen. It needs to be built in. The quality plan needs to identify the standard to which the project product needs to be judged. It also needs to identify how the project will be judged. Finally, it needs to identify how the project will ensure that it is producing a quality product.

5. A plan to manage the scope.

Just as a project may change because of new information, or new conditions, so it may also change because the participants decide to adjust the purpose of the project. A separate plan related to the project change plan is required in order to manage changes to the purpose and extent of the project. These changes will affect the project as a whole and require management approval. In order to ensure appropriate governance, the project needs to have a plan to ensure that only the correct tasks are performed.

6. A management plan for the team.

Of course, people do not just manage themselves no matter how self-reliant the team is. Appropriate skills need to be available. Tasks need to be assigned and reported on. All of this is included in the team management plan.

7. A management plan for the materials.

Not all projects strictly sole on the team members. Sometimes, it is necessary to obtain raw materials or equipment in order to complete the project. This plan details details which materials and equipment. It also states when the materials are required and how they will be obtained.

8. A list of tasks.

The work break down structure is a list of the tasks that make up the project. Often associated with the WBS is a related list. This list includes who is responsible for the task. It also includes an extended definition of the task and its products.

9. A schedule.

In many ways, this is a summary of everything that has gone before. It takes each of the tasks and puts them into the order they will be done. Finally, it assigns a date to the start and completion of each of the tasks.

10. A budget.

The budget plan details the management of the project's actual costs and budget. In addition, it also details the amount budgeted to the project.

How to Know If a Woman’s Attracted: The 5 Signals

Maybe she’s that waitress at the local café. Or maybe she’s a coworker or classmate or even the friend you’ve always secretly had a crush on. Regardless who she is, if you like her, then you want to know if the feeling’s mutual.

Lucky for you, all women give off signals when they’re attracted. Most guys never pick up on these signals. If you don’t know what you’re looking for, you could easily overlook these secret signals, as well. And you probably already have. You have probably let countless women slip through your fingers in the past because you failed to see the signals.

But you’re never going to make that mistake again. By learning the 5 most common-but least understood-signals of female attraction, you are prepared to get the girl. Just look for 1 of these 5 signals, and then make your move. It’s as simple as that!

1.) She says your name a lot in conversation

If you find a woman saying your name in conversation, there’s a good possibility she has feelings for you. When someone has feelings for another person, the sound of that person’s name gives them a little emotional rush. (Just think of children in the schoolyard writing their crush’s name in their notebooks!) While adults don’t skip around the playground and chant their crush’s name, they do unconsciously say it whenever they can. So if she says your name a lot, there’s a good chance she’s attracted to you.

2.) She fidgets with her hair

When a woman plays with her hair, it often means she’s turned on. It’s a grooming reflex: primate females groom themselves for males before mating. (If you want proof, just go to your local zoo!) Thus, if you catch a woman stroking her hair as she talks to you, it means you’re probably arousing her interests.

3.) She breaks eye contact first

Poets say the eyes are the windows to the soul. Well, her eyes are also a window into her feelings. It’s a well known fact that eye contact signifies confidence. And confidence is nothing more than comfort in one’s status. So, for example, if you were training some new entry level employees at your job, then you’d probably feel very confident in holding strong eye with all of them. If, however, you were having a business with your boss’ boss, then you probably wouldn’t feel as comfortable maintaining strong eye contact (since your boss’ boss has higher status). Likewise, if you notice a woman continually breaking eye contact first, she’s probably nervous with attraction for you.

4.) She gets carried away with emotion sometimes around you

A major misconception most guys have of women is that they need to “like” you to feel attraction. Just think of all the bad boys who do amazing with women! Now, you don’t need to become a “bad boy” just to attract women; however, you shouldn’t be discouraged is a woman isn’t always in a peachy mood around you. In fact, it’s better if she’s not! A woman would never waste her emotions on a guy she didn’t like. So if she sometimes gets frustrated with you or even angry at you, it’s a good thing.

5.) She speaks in the future tense about you

Here’s a very subtle-but very powerful-attraction signal that women give off. If a woman’s interested in you, she’ll make comments about seeing you in the future. It’s important to note that none of these signals will be overt; instead, they’ll be little offhanded comments like, “Are you going to x, y, z event next week?” If a woman is asking such questions, it’s a telltale sign that you’re on her mind.

Buying a Plasma TV

Plasma TVs are the big screen televisions. The screen measures from thirty two inches to sixty five inches and is approximately four inches thick. Plasma TVs are known as flat screen TV. But not all big flat screen TVs are plasma technology. They can also be LCD technology. The plasma technology is based on neon and xenon gas filled cells that are illuminated by electrical pulse current. Varying the pulse gives different shades of red green and blue which makes the image on the screen. The image is crisp and clear.

If you want to buy a plasma TV, be prepared to spend at least several thousand dollars. They start at price at two thousand dollars and go up depending on brand, style, features, size, etc. When shopping for a plasma TV what do you look for? First of all, what size screen do you want? This depends on how much space you have where you plan to place the television. You need to measure to see what size your area can accommodate and what size will look best. Do not automatically buy the largest screen there is. You need to have distance between you and the screen in order to conveniently view the television. There should be a least fifteen feet distance for the sixty five inch screen. You will probably want speakers to amplify the audio from the plasma TV. You can use your stereo speakers or you may opt for surround sound. This will add to the price.

You do not need much room for your plasma TV because the screen can be mounted on a wall with slim speakers mounted next to it or placed elsewhere in the room. Plasma TVs with the big screens can enhance the video graphics of video games and can be a lot of fun to play on. The problem is that plasma TVs can be subject to "burn-in". This is a situation where an image that has been on the screen for a while "burn's in" and leaves a shadow or outline on the screen. Once this happens, you can not get rid of the shadow. So if you plan to use your plasma screen for playing video games, you want to keep this fact in mind and be careful.

You can purchase plasma TVs in the store or online. If you shop online, make sure you are dealing with a reputable company.

Iron Man Soars Past Expectations! (Review)

The long-awaited film of Marvel's metal-clad superhero Iron Man is absolutely fantastic! John Favreau's vision of the comic icon is well presented, providing full details for the greatest of fans and still managing to capture the audience's attention throughout the entire movie. Beautifully shot, the film uses a powerful palette of colors and images that should be the standard for comic related films. While movies of similar ilk have generally increased in quality over the past few years, Iron Man seemingly pushes ahead to expand the suspension of disbelief to the point of allowing the viewer to emotionally embrace the unfolding of the heroes origin.

Marvel's big guns united forces with the screenwriting team to conjure a wondrously written script. The basics of the origin story are maintained while being updated for a present day setting. The dialogue and character interaction could have been taken straight from an old comic without sounding too over the top (within reason given the nature of the characters speaking.)

Casting for Iron Man could not have been better! Robert Downey Jr. not only looks the part, but his acting ability allows him to express the bad boy attitude of Tony Stark and present a convencing evolution of the character's compassion over the course of the film. Howard shows he is familiar with the Jim Rhodes persona and provides the movie goers with the realism needed to make the film enticing.


Jeff Bridges was a good choice for Iron Monger. His development of the evil within himself was fairly straight forward and predictable, but none-the-less it was still exciting. The romance that developed between Stark and Potts was also predictable and anyone that had read the comic would rather expect it, but again, it was well done and did not take away from the main events of the story. It almost seemed that the origin of Iron Man did not need the attack of Iron Monger and the love of Potts to be involved, but not quite. The inclusion of these elements propelled the plot forward instead of feeling like they were forced in to make the film more comic-like.

While the action scenes contain breath-taking special effects and were tastefully placed within the story to enhance and not take over, the real excitation for those movie goers who are also fans of the comic comes from two hints at future films (if you can call being hit over the head with a flat-out reference to anothercoming movie a hint!) Towards the end after Rhodey has helped Stark into his suit, he glances back at the all silver prototype and mumbles, "Next time," we all know that War Machine and Tony's heavy drinking binges are only a few films away!

Perhaps the most talked about portion of the film comes after the credits. For those that stick around long enough to get to the end, you get to see a teaser where Tony Stark finds Sgt. Fury standing in his living room and requests him to help form a team of superheroes he wants to call the Avengers! If that is not exciting enough, Samuel L. Jackson is portraiting Sgt. Fury! Some may immediately say that Sgt. Fury is Caucasian in the comic books, and generally speaking that is correct, but there is an alternate version of Sgt. Fury, one specifically based on Jackson, so it is not only acceptable for Jackson to play Fury, it is fitting and gives Marvel a few outlets for altering stories to fit cinematic needs without upsetting hardcore comic fans.

Iron Man is filled with punch after punch of action excitement and keeps the audience interested through excellent writing, acting, and a great balance of explosions, drama, and romance. Exceedingly well planned, filmed, and presented, Iron Man will satisfy any movie fan and make them hungry for more!