Why Are Risk Assessments Important for the Construction Industry?

The construction industry is an area that is full of potential potential problems and therefore a thorough risk assessment is essential for any project. The construction industry is one that has the potential for a wide range of health and safety issues to revert their head, and carrying out an assessment is one way to ensure that the chance of any accidents occurring is as small as possible, protecting everyone involved with the project.

Risk assessments not only involve identifying potential hazards of a construction project but also weigh these against numerous other factors, including contractual obligations, financial constraints and the requirements of the proposed projects. It is important to consider the health and safety risks of a construction project in conjuction with these other factors and not as singular problems that are not affected by other aspects of the construction project, doing this could mean leaving yourself open to other risks you may not have initially considered or prepared for.

There are numerous qualified health and safety consultants that can be employed to carry out professional evaluations and have experience in a wide range of settings, including within the construction industry. Having an expert carry out an assessment on any construction project is imperative, especially as construction is often considered a high risk area, and these assessments can highlight issues that you may not have even considered could be a risk or potential problem, allowing you to prepare for potential problems and minimize the chance of them occurring.

Often to coincide with testing, many companies further this by employing the same companies to carry out air testing of the environment after project completion to ensure it meets and complies with UK building regulations. There are specialist risk assessments and air testing companies across the country that have experience in a number of fields including the construction industry. These often provide services locally, for example specializing in risk assessment in the Dorset area and air testing Bournemouth.

When undertaking any project, whether this is a construction project or any other one it is imperative to consult with experts and have a thorough and complete risk assessment carried out prior to starting. And by contacting the experts you can ensure that all the possible problems have been evaluated and health and safety measures have been put in place to reduce the risks to everyone involved.

How to Build a Bat Rolling Machine

One of the most searched areas in bat rolling is how to build a bat rolling machine.

There are several factors that go into building a bat roller. I will break this article out so you can make a n enlightened decision to whether you want to take on such an endeavor.

Here are some questions that need to be answered before you start a project.

  1. How the machine works
  2. Parts and Materials
  3. Cost
  4. Time

How the Machine Works:

Before any of these can be answered you will first need to decide on what type of a machine you are looking at.

  1. Perpendicular
    1. The bat is inserted 90 degrees to the rollers and can only roll 1 way.
  2. Parallel

    1. The bat is inserted from the sides along the plane of the rollers and the entire sweet spot can be rolled at once.

Most parallel machines can roll both ways, but a perpendicular machine can only roll 1. Also a perpendicular machine will leave flat spots in the bat and not roll the entire sweet spot.

We highly recommend a parallel machine.

The machines work by compressing the carbon fibers and laminates between rollers and then rolling the bat between the rollers. Primarily the sweet spot of the bats are the section you are targeting during the roll.

Material List

  1. The Shell
    1. Typically made of steel or aluminum
    2. Holds the guts of the machine
    3. Welded or screwed together
  2. Upper Carriage

    1. Holds the upper rollers
    2. Moves up and down
    3. Tolerances are tight
  3. Bearings

    1. Rollers Bearings
    2. Thrust Bearings
    3. Bushings
  4. Shafts
  5. Handles
  6. Rollers

    1. Made of plastic, steel, wood, other
    2. Tolerances are very tight
    3. The center hole through the roller must be fairly exact
    4. Rollers are machined on a metal lathe


The cost of building a machine can greatly very… but you can figure the minimum will be $200 plus, depending on your bearings and roller materials. It will be more for the state of the art plastics that are being used in the better bat rolling machines.


Building a machine will take some time as you will have to draw out the design and then cut and machine the parts and gather the bearings etc.

Bottom line is this is a project that can be taken on if you are a do it yourself person who has proper equipment and time and some designing knowledge. A machining background or a friend who has one would help here.

Another viable option is to purchase a Bat Rolling Machine directly from a reputable manufacturer. Here are a few things to look for when choosing that manufacturer.

  1. Reputation
  2. What type of machines are the offering
  3. Do they have multiple models to fit you individual needs
    1. We recommend parallel machines as they give you the best of both worlds and are not limited to partial break in as the perpendicular machines are.
  4. What plastics are they using in their bat rolling machines

You need to stay away from a plastic called Acetal with a trade name of Delrin. It is really hard and has zero forgiveness.

Hotel Security: Top 5 Tips To Staying Safe and Secure In Hotels

Whether guests at a seven star hotel or a seven dollar hostel there are certain things that travelers need to consider when staying in overnight accommodation. Here are our top 5 tips for staying safe and secure in a hotel environment.

1. Room to Improve: If you have the option to pre-book a room or choose where in a hotel to stay think about a few things.

  • What floor to stay on – the general consensus is between the 2nd floor and 6th floor. This way people can not easily gain access to your room windows but fire fighters can reach with their ladders.
  • The risks of the area – Are you staying in a hostile environment? If there is a risk of IED's, car bombs or suicide bombers think about getting a room at the back of the hotel or the opposite of where cars can drive up to the entrance. Perhaps even away from the general lobby area.

If you are not happy with the location of your room, ask to move to a different one.

2. Fire first :

This is a saying we use to remind travelers that as soon as you arrive at your hotel spend a few minutes to ask yourself, what if there was a fire or other emergency?

As soon as you get into your room, place your bags on the bed and exit the room. Look for your nearest fire exit and near fire extinguisher, picture reaching these in the dark and count either steps or number of doors between your room and the these points. You may have to find these in the dark or when there is smoke blinding you. Do not stop there, check the fire exit and ensure it is in fact a viable option. Then when you are happy head back to your room.

3. Fire second:

There was a tragic story of a whole family dying from a small fire inside their home. They were sleeping with every door open and all the toxic fumes traveled freely through each bedroom killing the occupants as they slept. When fire fighters arrived they only found the pet dog alive as he was shut in a small utility room. The door had protected the dog from the fire and fumes. This story re-enforces the fact that a room can protect the inmates from smoke and heat for a reasonable amount of time if done properly.

Fire second is a saying we teach our students. Once you have identified the fire exits and returned to your room, ask yourself again, what if there was a fire? If there is no escape from the exits then this room will be your citadel, your safe room.

  • Look at the window, does it open, what floor are you on? Can you jump? If not does it open to give you fresh air.
  • How does the door open and unlock. Is there a key? If so always leave it in the same place.
  • Is there a bath – in an emergency you can fill this up with water and use it to douse the door and walls.
  • If there is a fire and you cant escape then wet towels and block any gaps around the door.

If traveling to less developed countries or regions, consider taking portable fire and carbon monoxide alarms. Both are cheap, small and easy to use and well worth the small amount of space they take up.

4. Double the Door

Your hotel room door is your best barrier to external risk. When inside your room make sure that you use all the locks provided. Do not open the door unless you are a 100% sure to what you are opening it for. If there is a peephole, use it.

There are a few great items on the market that can provide a second layer of door security think about taking these, as they are small and cheap.

  • Door wedge
  • Door lock ratchet

When you leave the room, use the peephole, make sure there is no one outside. When you come back to the room do not assume that it is secure. The majority of hotel room locks can be defeated quite easily, many people have access to the keys and it would be a mistake to assume that no one could have gotten in. Take caution, have a quick look around and then relax once you have checked and the door is locked behind you.

The Hamas chief Al-Mabhouh killed by Mossad in a Dubai hotel room made the mistake of assuming his hotel room was secure. Mossad used either a very simple and easily attainable machine to decode the electronic door or the tried and tested string and wire technique that can open many doors which have the tiniest of gaps between the door and floor.

It is not just the intelligence services that know these tricks, many criminals and attackers have the means and the motivation to go to these lengths.

5. Complacency is a dirty word :

  • If you hear an alarm, do not ignore it. React quickly and use your pre-determined exit. We do not mean panic and run out in your underwear screaming, but just make sure you do react. Get dressed, get your shoes on, stay calm, prepare to leave the hotel and take your room key, if there is a fire and there is no escape you may have to get back to your room, close your door behind you. Try and avoid using the hotels muster point or emergency gathering location. Sometimes hostiles will use an alarm to gather people in one spot before attacking or carrying out a secondary attack.
  • If you wake up in the middle of the night for no reason, check that there is in fact NO reason, take a few seconds to listen, look and sense if something is wrong. If nothing go back to sleep …
  • If you see smoke or fire when in a hotel do not assume someone else has reported it. Initiate a fire alarm or call the hotel. Especially when you are in your room call the emergency services as well, do not assume the hotel will call them. Hotels are unwilling to call the emergency services until they have checked out the incident themselves for fear of creating a false alarm. This can cause a significant delay. There have been many horror stories of deaths and injuries caused by these delays. Take control of the situation yourself.
  • Do not assume that because you are in a hotel you are safe. If you are in a lift and someone else comes in that you are unsure of waiting for him or her to push a floor before you do. Make sure no one is following you towards your room.

Most importantly as with all of our advice, do not develop irrational fear, do not think that everyone is out to get you. Instead just increase your awareness, listen to your sixth sense and take the time to prepare for certain scenarios. Time spent preparing and planning is never wasted, it can also mean the difference between life and death.

Motorized Window Shades – Somfy Vs Lutron – QED and Sonnesse

Somfy and Lutron both offer tubular motors for raising and lowering interior motorized window shades. Lutron sells the motor and shade together while Somfy sells just the motor which can be combined with any window shade. Both companies also sell controls (wall switches, remotes and interfaces) that are used to operate their respective motors.

In the late 90's, Lutron introduced the QED (Quiet Electronic Drive) which it paired with its own brand of shades (roller shades mostly). The product made big waves for being practically noiseless. This was a classic example of redefining the parameters of competition in an industry. Beforethe advent of Lutron's quiet motors, consumers did not even know that motor noise level was or would become a factor in their motorized shade purchase decisions. Only in the last couple of years has Somfy caught up to the QED's noiselessness. Today, there is still a difference, but it is slow and most consumers do not consider it a deciding factor.

Somfy manufactures two different types of 'quiet' motors used in motorized window shades; an AC powered version (ST50) and a more recently introduced DC powered version (ST30). Lutron's QED Motors are all low voltage, DC Motors. The difference between AC and DC power is that the former is high voltage while the latter is low voltage. AC Power is the same as the power received from plugging a cord into a standard wall outlet. Low voltage is powered by that same outlet but the cord has a transformer (think of a cell phone cord or a computer power cord with their boxes on the plug on in the middle of a cord – that is a transformer) and reducing or 'knocking down 'the high voltage power received from the outlet to low voltage power. A main reason that DC power is important is that fewer building code issues arise and no electrician is required for wiring low voltage powered motorized window shades. Absent an electrician, wiring costs and job complexity are both significantly reduced.

The QED is available in three different sizes called the QED64, QED100 and QED225. The number gives a rough gauge of the square footage of fabric that the motor is designed to lift. For example, the QED64 can lift a shade up to 8 feet x 8 feet, the QED100 can lift a shade up to 10 feet x 10 feet and the QED225 can lift a shade up to 15 'x 15' – this size motor is only very rarely required for residential applications. These are approximations only, in the field, these motors are known to actually lift more than these numeric values ​​imply. The size of the motor affects its diameter which determinates the diameter of the tube that the motor uses. Lutron's QED64 uses a 1 5/8 "tube, the 100 uses a 2" "tube and the larger 225 uses a 3 1/2" tube. Tube diameter is mainly important for determining how wide motorized shades can be without bending (deflection) .Bent tube means that fabric will not roll up properly. The fabric will sag causing creases- this is not acceptable .Therefore the size is as much as the width as it is about lifting capacity.

Somfy's quiet motors, known as the Sonnesse line, also use different tube sizes. The ST30 uses a 1 1/2 "tube, the ST50 can use either a 2" or 2 1/2 "tube. * The lifting capacity of the ST50 falls somewhere between the 100 and 225. For very large applications, Somfy has larger motors, but to date, they are not in the Sonnesse (quiet) product line .It is very rare that a motor larger than an ST50 is needed for interior applications.

Both the QED and Sonnesse motors have proven to be reliable and both come with 5 year warranties.

Looking After a Static Caravan

What are the tips for maintenance of your static caravan: The outlay of funding you are planning for your static caravan is a stone for your future vacations with both family and friends. However, there are certain standard suggestions and recommendations for looking after your static caravan which might be useful in case your next holiday is one year later and the holiday home has to stay in a good condition.

  • Gas and electric servicing: Once a year upkeep of the gas boilers, which are most likely connected to the central heating system is necessary and should be done by an exceptionally competent engineer. Also, electric supplies should be a matter of concern and after care because it will only ensure safety in your next trip.
  • Superficial but visible exterior surface maintenance: There are opportunities of dirt accumulation on your caravan, so make it a point to clean the windows and other areas with a cloth and detergent. It will not only enhance the look of the caravan but also make it hygienic.
  • Gutter system maintenance: It should be your ultimate task of keeping your caravan in an utilizable condition because guttering, that is, collection of debris and leaves which block the passage of water, is one of the main reasons for accumulation of moisture resulting in a dampened surrounding.
  • Using an anchor: Any person who is unaware of the flipping over of caravans due to strong wind might not use anchor chains and keep a check on them on a regular basis.
  • Latches: Keep the doors and windows locked with the help of the latches so that you live by the saying which goes as, precaution is better than cure.
  • Cleaning: It includes keeping the caravan rust free, and also looks around for any manifestation of any sort of damage due to inevitable and natural aging of your holiday home.

Why do you need insurance for your static caravan: Insurance is for security, protection and fortification for all those cases when your very own caravan on which you have invested your hard earned money needs to undergo repairs for any wear and tear. It is a precious lifelong asset which needs to be guarded for all the situations during which your little mobilized holiday home needs a revamp. One never knows when an unavoidable and adverse in terms of your economic status may crop up and you need to replace or repair your movable home at the same time. So, insurance is needed for coverage of all the worst possible times.

What is the only thing that one should keep in mind while searching for the best premium quote for the static caravan: Check and double check the elements of your policy so that you know what to expect during your time of need.

The realms of options available are:

  • Touring caravan insurance.
  • Folding campervan insurance.
  • Self build campervan insurance.
  • Renewing the campervan insurance.

Your static caravan is your own customized space for ambulatory holidays.

Siding and the Environment

In today's increasingly environmentally-friendly climate, the construction industry has begun to get something of a bad reputation for utilizing materials that are known to be harmful to the planet. The siding industry is no exception. With vinyl being one of the more popular and affordable materials for siding installation, the siding industry is often accused of contributing to the demise of the planet by introducing the modifying chemicals of PVC (polyvinyl chloride) into the atmosphere. Of course, the benefit of PVC is that it is inexpensive and quite easy to work with. But in the eyes of the average environmentalist, the advantages inherent in PVC do not outweigh its destructive impact on the planet.

So which types of siding are the best options as far as the environment is concerned? According to Ruben Jeruco, solid wood is probably the most environmentally-friendly siding material available today. Although wood siding requires a fair degree of maintenance, the fact that it is renewable makes it attractive in the eyes of those who are environmentally-conscious. Fiber cement siding is also known to be a reliably earth-friendly product. Offering the same great look and feel of wood but without the significant maintenance, fiber cement is another good choice for people who do not want to run the risk of destroying the planet.

Although it is quickly becoming a less popular choice among homeowners, aluminum siding is actually regarded as fairly environmentally-friendly. Although its production requires a significant amount of resources, aluminum siding is often made of recycled materials, making it a winner in the eyes of those who think green. Finally, natural stone and classic cement stucco are both regarded as earth-friendly siding options; however, the cost involved in stone and stucco puts both choices out of reach for homeowners with limited budgets.

Of course, despite the fact that vinyl is often regarded as the planet's greatest enemy, vinyl siding might not actually be as ecologically destructive as some might think. Vinyl siding requires far less maintenance than most other types of siding once it's installed, few environmental resources are needed in order to preserve it. Vinyl siding is also said to use little energy as part of its manufacturing process. So while the material itself is definitely not the most earth-friendly, vinyl might not be quite as bad as some people think.

If preserving the environment is important to you, then make sure that your siding contractor is aware of your feelings as he helps you select your siding material. With so many earth-friendly siding choices available, you can improve the exterior of your home without having to choose between conservationism and aesthetics. And while you may pay a bit more for your eco-friendly siding, you'll be rewarded with the peace of mind that comes along with knowing that you're doing your part to preserve our planet for many generations to come.

Leveraging Technology for Organisational Excellence

Technology & HR-Leverage one for the other: "Technology and HR are enablers of business. Integration of the two would mean not only harmonic co-existence but also leveraging one for the other. activities and automating the back office and transactional activities related to recruitment, performance management, career planning, and succession planning, training and knowledge management. analysis and conscious keeping. "So they can play complementary bars."

Technology and HR both have one thing common ie, both these are enablers of business.

In recent times, technology has become conspicuous with information technology, as hardly any other technological development of the past would have affected all spectrum of business as information technology has impacted. Irrespective of the kind of business you are in, services or goods, commodity or branded, trading or manufacturing, contemporary or traditional deployment of information technology in one form or the other is a foregone conclusion. To manage and deploy technology in an effective way, all business organizations would need knowledge workers. Managing of these knowledge workers is the responsibility of HR function. Here is the integration of technology and HR is an absolute must.

Having understood technology and HR in the present context we must understand integration in this context. Integration would not only mean harmonious co-existing but would also mean one enhancing and complementing the other ie, technology is used to enhance the effectiveness of HR and HR functions helping in adopting and managing change which technology deployment partnerships in.

Leveraging technology for HR

HR management as a function is responsible for deliveries like business strategy execution, administrative efficiency, employee contribution and capacity for change. All these are implemented through what HR people do ie, staffing, development, compensation, benefits, communicate organization design, high performing teams and so on. In majority of these areas technology is being deployed.


Recruitment is one area where all the companies worth their name leverage IT. There are two different models of e-recruitment, which are in vogue. One is recruitment through company's own sites and the other is hosting your requirement on the other sites eg, monster.com, jobsdb.com, jobsahead.com, naukri.com, and jobstreet.com and so on so forth. The first models is more popular with the larger companies who have a brand pull for potential employees eg, GE, IBM, Oracle, Microsoft, HCL, ICICI, Reliance, Mindtree consulting etc. Other companies prefer to go to the job sites. Some are adopting both.

E-recruitment has gone a long way since its start. Now these sites have gone global. Sites like jobsahead.com and monster.com have established global network, which encompasses separate sites for jobs in Australia, Denmark, Belgium, and Canada etc. Job seekers are able to search job by region or country country and employers target potential employees in specific countries. For example, 3 Com recently posted a company profile on the Ireland site that highlights the contributions of 3 com's Irish design team in its global projects.

In the early days e-recruitment was plagued with flooding the employers with low-quality bio-data's. Again technology has come as a savior. Now pre-employment testing like the one introduced by Capital One, a US based financial company, help in filtering the applicants. These tools test online eg, applicants for call centers. 'Profile International' a Texas based provider of employment assessments, has developed tools that allow instant translation of assessment tests between languages. Further developments like video- conference specialized sites, online recruitives recruitment and combining online and offline methods are leading to more and more companies adopting e-recruitment at least as a secondary recruitment method. Arena Knights Bridge, a US based IT company conducts video based interviews of its prospective employees and only short listed employees are met in person. Even Cisco was to launch the same.

Employee Self Service

Employee self-service is feasible one utility of IT, which has facilitated HR of most mundane tasks and helped it to improve employee satisfaction. Employee self services is a plethora of small activities, which were earlier carried out by employee through administration wing of HR. These travel travel books, travel rules information, travel bills, leave rules, leave administration, perk administration, etc. Earlier all these rules and information were in the custody of HR. Every user employee was expected to reach out to HR and get it done. Now with deployment of ESS in most of the companies, employee can request for travel related booking online, fill his / her TE bills, apply for leave, log time sheet and see his perks value disbursed and due etc. Eg, in Ballarpur Industries Ltd. leave administration is completely digitized in its corporate office. It is working towards digitizing travel related activities, perks and even compensation management and performance management administration. 'Digitize or outsource all the mundane and routine focus only on core and value add' – Vineet Chhabra VP -PDC BILT.


Communication which is most talked about management tool has always been a gray area in HR management. In large companies with vast geographical spread communicating with all employees had really posed a formidable challenge to HR professionals. Technology has again come for rescue. Starting with telephones, faxes, e-mails and maturing into video conferencing, net cast, web cast etc. communication is one area of ​​HR, which has been greatly benefited by technology. Mouse & click companies like Oracle, IBM has an intranet which caters to most of the information needs of its employees. Brick & Morter companies like BILT also have made a foray into deploying intranet for internal communication, which has corporate notice board, media coverage, and knowledge corners.

Knowledge Management

Another area of ​​HR, which is leveraging technology, is employee development. Programmed learning (PL) ie learning at its own pace is one of the most effective ways of adult learning. Use of technology for this purpose can not be over emphasized. Aptech Online University and 'The Manage mentor' are some of the Indian sites, which are in this business knowledge management, which is an integral part of any learning organization, which can not become a reality without technology. Companies can harness the knowledge of its employees by cataloging and hosting it on the intranet. Talk to 'Big-5' or not 'so big' consulting companies you will find that main stay of their business is the knowledge repository. Technology has enabled them to retrieve it swiftly. In the competitive environment where speed is the name of game technology driven knowledge management consistently provides a strategic advantage.

If you look at HR module of ERP solutions like people soft, SAP, Oracle and Ramco they provide you with a comprehensive package which helps in man-power planning, recruitment, performance management, training and development, career planning, succession planning, separation and grievance handling. A transaction happening in all these areas are digitized and form a closed loop ensuring employee database is always updated. Eg a joining letter of a new employee is system generated. It will be printed only when all mandatory fields of information are entered. Simply a transfer order or a separation letter is issued from the system only if that transaction has been carried out in the system.

For career planning, success planning, skill and competencies matrix methods are used by most of these systems. They search an employee with the required skills first in the in-house database of employees. Once put in practice in letter & spirit, this system not only enhances business results by matching the right candidate for right job but also improves retention of employees.

Processing payroll, churning out time office reports, providing HR-MIS are some other routine activities of HR which have been off-loaded to technology.

Leveraging HR for Technology

All HR professionals, preaching or practicing, learning or experimenting, teaching or studying have experienced leveraging technology for HR. But most of us come across a situation where we need to leverage HR for technology. Let us understand what we do mean by this.

Whenever technology is deployed afresh or upgraded it involves a change. The change may be at the activity level eg, applying for leave through the intranet or at the mental model level eg, digitizing the process succession planning which has been HR professionals forte. The people have always registered adopting change. This is one area where HR professionals are to deliver ie, become change agents and lead the process of technology and change adoption. The resistance to change is directly proportional to speed of change. Now speed of change has increased and hence resistance.

Just to take an example, most of ERP implementation in the world has not been able to deliver all the expectations. Some of these have failed to deliver at all. While analyzing the cause of failure it has been observed that 96% of failures are because of people related issues and only 4% are due of technology.

It is the people who make the difference; hence HR should exploit its expertise to facilitate the adoption of technology. I would like to put together some of the thoughts on what HR should do for this.

At the time of recruitment, stop hiring for skills rather hire for attitude and a learning mind. Skills of today are no longer valid tomorrow. Managing ever changing change is the only criteria for success.

Functional or technical skills can be acquired during the job. Here recruitment in the technology era needs to undergo a paradigm shift ie, from a skill / competency based it needs to be attitude and learning mind / ability based interview. That would translate into hiring for skills for future. In IBM every employee has to fill in his / her individual development plan where the employee commits its learning one / two new skills every year so remaining competitive every time.

If we look at the chemistry of resistance to change it is either a skill issue or a will issue. To address the will issue we need to work at a comprehensive solution starting from recruitment (as discussed earlier), reward, compensation and leading to organization culture which prompts change. A living example is 3M, a US based company, where innovation is way of life, where 10% of revenue must come from new products every year. For them change becomes way of life.

To address the issue issue further organization need to prepare a communication strategy which creates a 'pull' for the technology. For example, in Ranbaxy, when they went for SAP implementation they anticipated resistance. To address this they started a house journal, which was aimed at educating the employees on the benefits, which will result from adoption of ERP, SAP. This created a need rather a potential need or a latent need was thought out. Adoption of ERP did not become much of a problem.

At times adoption of technologies is perceived as a threat by the employees eg, automation leading to reduction in workers, office automation leading to retrenchment of clerks etc. HR needs to be associated with the technical adoption right from the beginning till the end. At the selection of technical stage if HR is associated, it can map the skills required and create a pull during implementation and adoption. Post adoption it can release the excess non-re-allocable employees.

To understand this process more clearly we can take example of ERP implementation. ERP is taken as an example as this is one technology adoption which effects employees across the org. irrespective of function and position. Any other automation may have affected only a segment of organization. ERP implementation in any organization goes through the following stages.

1. Selection of package

2. Business analysis

3. Solution design

4. Configuration and customization

5. Conference room piloting (CRP)

6. Go-live and production

At each stage HR has to play a role, which will help in moderating resistance to change.

During selection process, the change agent can understand the business benefit ERP would bring. This would help him to draw a comprehensive communication plant aimed at creating a 'pull' for the change. The communication plan may use its various weapons from the armory. The obvious examples are Newsletters, Newsflash. In-house journal, addressing by the top management, web cast, open house sessions, meetings formal and informal.

During the business analysis phase implementation team is expected to analyze the existing business processes. At times this leads to surfacing of some data which is not very desirable by the process owners, leading to resistance at this stage, HR has to be again proactive and carry out a detailed stake-holder analysis. Such an analysis should give a lead to potential areas of problem and potential champions of change.

Solution design involves defining 'To-be processes' ie, the way business would be carried out in future. At this stage HR has to play the role of catalyst to turn the heat on. The idea is to ensure to make maximum out of an opportunity of package enabled business transformation. HR can play a role by arranging to educate and train the right people on best business practices, just before this phase.

During the configuration and customization HR has to keep on beating the drum, the customization of a standard package is a big no-no. Similarly, during the conference room ploting (CRP) it should help in identifying the right persons to be involved in CRP. A thorough testing at this stage would result in less pain at the time of going live. This is also time to focus on training of end users, the employees who are going to use the system once implemented. Training- retraining -training to ensure all the prospective users are comfortable with usage of software before the system goes live.

During the go-live stage HR has to work over time to keep the motivation levels high. This is the time when management starts losing patience as one glitch after the other keeps appearing and actually bringing the business to halt. At this stage, HR has to play 'conscious keeper' for the top management once into a product relocating the surplus is a challenge for which it has to be prepared before it.

This examples makes it clear that involvement of HR during the entire life cycle of technology is valuable. ERP is not an isolated case. It is true for any other technology adoption only finer details may vary. Here HR must play a proactive role rather than being just a silent spectator or mere executors of the wishes of business or chief technology officer in case of technological changes.

Having set the case in different perspective, it seems only logical to leverage technology for HR and vice-versa.

Why Thick Tires Are Better Than the Standard Models

Often, you will hear about the thickness of tires when it has to do with sports cars or off road vehicles. There are so many benefits for these cars to have thicker tires on roads or other terrains. It is also beneficial to have these types of tires on your standard 1.4L car.

Some drivers prefer the appearance or aesthetics of the thickness where other drivers are more into the practicality when it comes to the driving experience. These are the pros and cons of having thick tires opposed to the standard versions.

The Pros

  • The thickness can distribute the weight better over a larger area. You will find it easier and safer to take corners at a higher speed.
  • Better grip can also help you to take corners at a higher speed and you will be able to experience a smoother drive at high speeds without as much vibration.
  • The distance needed to come to a stop will be decreed because of the surface area in contact with the tar. It will also make stopping or braking much easier and safer.
  • Wear will also be distributed evenly as the heat will also be distributed evenly. When wear is uneven, problems such as unbalanced and unaligned wheels arise. With time, the wheels could become extremely damaged and would need to undergo expensive repairs.
  • Rolling on an incline is slightly decreed because the tires have more grips molded in the tread. This could increase the lifespan of the clutch because less clutch control will be needed.
  • Rainy weather will not be as much of a problem because more rubber is in contact with the road.

The Cons

  • Unfortunately, not all cars are equipped with a large enough wheel well to accommodate such brakeers wheels.
  • These tires do tend to be more expensive because of the reinforced material used to manufacture the product.
  • Fuel consumption will be slightly higher due to the weight and increased torque being used overall.
  • You will have to consider the profile of the tires so that speed and acceleration is not affected.

When changing the tires of your car, it is important to test the compatibility. Some cars were not made to be modified to such an amount as modifications could actually influence the overall driving experience in either a positive or negative way. It is to your discretion wherever you make changes to your car in terms of the wheels and tires.

How to Clean Mold From Your Home Effectively

Mold is a problem that many different people face and it is a serious one. As you may know, there are different types of mold, but the most common type that people deal with in their own homes is black mold. This type of mold spreads very quickly and can pose many serious threats health-wise to anyone is living in the house as well as to the house itself. It can cause untold depths of damage, so it's critical that you learn how to clean mold from your home effectively.

To know how to effectively remove the mold from your home, you need to know where it is growing. You may have found one patch of mold, but that does not mean that there are not others. In order to prevent the mold from growing back or continuing to spread, you need to check all parts of your home to make sure that you have gotten it all. The main spots to look at are cabinets, under rugs / carpets, every area of ​​the walls, and in the basement and attic as those are two of the most common places that mold is found.

A great idea would be to use natural and organic cleaning products to treat the mold where it is in your home. Make sure to seal off the area that you are working in so the mold does not spread through the air which black mold tenders to do. Also take the proper health precautions for yourself by wearing gloves and even a surgical mask as well to make sure that none of it gets into your lungs. If you want to learn more ways on how to clean mold from your home effectively, use the internet as it is a great resource.

All About Guinea Pig Outdoor Hutches

A good guinea pig hutch is very important if your animal will be kept outdoors. Be certain you understand what you should search for prior to you buying hutches for guinea pigs. A guinea hutch is specifically designed for owners who appreciate keeping their animals outside through the summertime months or all year. If you are prepared to allow the guinea pigs to stay inside, you bought to buy an indoor cage.


Due to guinea pig hutches being consistently exposed to elements, hutches are sturdier in their construction than a regular cage. The ideal hutches are constructed of solid, thick wood instead of flimsy plywood. It assists in making a hutch very sturdy, and provides great insulation from the rain and wind. Most importantly, thick walls keep out predators – predators like rats easily can gnaw through the thin plywood walls and attack the animals. A good quality hutch offers warmth and protection.


You bought to make sure that you select a hutch that has a solid floor. A few individuals advise the usage of hutches that have mesh floors, like you'd locate upon rabbit hutches, yet these could be extremely dangerous and easily can result in the guinea pig breaking his leg following getting the leg trapped. In order to make a sturdy floor more comfortable to walk upon, you bought to cover it with a couple of sheets of plain white and black newspaper, and a few layers of hay.


A quality hutch possesses a solid roof that slopes from the front to the back, to assist in channel water away and stopping it from sitting up the roof, leading it to rot. Additionally attempt to locate a hutch that has a huge overhang upon each side. To repeat, it assists in keeping rain away from the hutch walls, and from the animals. Guinea pigs do not appreciate getting wet, and it'll assist in providing protection. The roofought to be covered within two or three layers of roofing felt in order to make it waterproof. Roofing felt will be ideal for weather-proofing the hutch.

Hutch Doors and Front

The fronts of many hutches are separated with two sections. The first includes a huge door, usually around 2/3 of the width of a cage that possesses a mesh front. It permits sunlight and air into the hutch, and additionally permits the guinea pig to get a peek at your garden. The downside to it is that it'll make the pets easier to spot for predators. To aid in protecting against this, be certain the mesh is securely fixed, and keep a close eye on it for signs of destruction.

The second portion of a hutch front includes a solid panel, that's also occasionally hinged to offer a second door. The panel makes a shaded region inside your hutch, providing great shelter from rain and bright sunlight, and is additionally a fantastic place for the pigs to gain a bit of peace and quiet.

The Difference Between Pepper Spray and Mace

Are you looking for a self defense mechanism? Are you wondering if you should buy mace or pepper spray and what's the difference anyway? Often people think mace and pepper sprays are the same thing. Although similar, they are not identical and produce different effects for different situations. This is an important decision that should not be taken lightly, to say the least.

The physical effects of pepper spray are as follows:

– When applied the eyes, pepper spray causes immediate involuntary shutting of the eyes, tearing and an intense burning sensation. People wearing protective eye gear, contacts, or sunglasses will still be affected as well. The initial incapacitating effect usually usually last ten to fifteen minutes, but the eyes will remain irritated for thirty to sixty minutes.

– Pepper spray also effects the respiratory system. When exposed, it causes immediate inflation. Your attacker's throat will swell, causing breathing to be difficult. This effect lasts between ten and thirty minutes. The airway will be open enough for them to survive, but they'll find it extremely difficult to even walk.

– Pepper spray may cause cases of uncontrollable coughing and gagging. This is due to the constriction of the throat and larynx, and generally lasts ten to fifteen minutes.

The physical effects of mace are:

– Prolonged burning sensation on the affected area.

– Increased nasal discharge

– headache, dizziness, and general discomfort

So now you know the differences between both, and can make a better decision when going between mace or pepper spray. Remember, when carrying mace or pepper spray always follow all proper safety precautions.

Six (6) Common Factors To Consider When Installing Air Conditioning Units

If you have a new structurally constructed house and your next step is to install the air conditioning units, then you have to consider a few things about air conditioning before you install them. There are common mistakes in installing air conditioning systems which will be printed in the following article in order to help you not make these.

1. Falling for the articulated sales talk of a highly experienced salesman.

Do not just let the salesman win your favor through his flattery and articulated sales talk. Winning you to his favor is his job as a highly experienced sales person. Often, some customers are not really knowledgeable about air cooling units. Some end up buying air conditioning units that are recommended by the salesman who would not care either the merchandise is too large or too small for the intended area. This is a common mistake of some customers which is making an outright decision to buy an air cooling unit without knowing what things they should consider first.

2. Installing the AC unit without careful planning.

In some cases, installations of air conditioning units are simply done to satisfy the caprice of the homeowner. This should not be the case. Installing air cooling units is not that simple, many things need to be considered. This should be well planned by your electrical engineer. The AC units to be installed must match the contour or layout of your house. This is why one type of air cooling unit is set in one place while another type is installed in another part of the house. Some mistakes committed in installing air conditioning units include installing too small or too big units in a room without considering the number of warm bodies occupying it, the area, sizes of windows on the wall and house layout.

The primary consideration when deciding what size to buy would be the area and the number of people using the room. First, you must determine the area in your house which you want to be cooled. This should determine how much power you need. Your room area should match the BTU or the British thermal unit value and the strength (capacity) of your air conditioning (ac) unit. It becomes a recommend guideline that a cooling capacity of 2000 BTU be required for every space of 50 square meters. So here, you need to do a little mathematics. The other thing to consider is the number of warm bodies occupying the air- conditioned area and how often they will use it.

3. Location of the AC unit

Another mistake commonly committed would be installing the unit inside a room or area with too many lights or light bulbs around. Such condition generates more heat from light bulbs when switched on. This does not help at all while using the air conditioning unit. In another related situation, setting up an AC unit in an area facing the sunlight or adjunct to a plant or tree is an installation that is not carefully thought out. Air conditioning systems must be cleared of any debris or any obstruction object.

4. Unchecked AC unit's connections

When installing the connections of the chosen air conditioning unit in your house, try to re-check the connections made if you have left everything to the technicians. More often, if not properly checked, some connections may not have been fit well, thereby, causing leaks in the future; therefore, it is better check these connections before it's too late.

5. Making window-sized holes in your walls to fit in an AC unit

The lesser holes you make in your house, the better. Nowadays, they do not make large window-sized holes in your house to accommodate your air conditioning units. There are several air conditioning units today that only require a very small hole for its installation. Today, you can have split type systems or ports, or independent wall unit, which suits suits your needs. Therefore, the lesson here is not to allow window-sized holes being made inside the four corners of you walls without it is absolutely necessary.

6. Installing AC unit in rooms with wood floors

It is not exactly bad to have an AC unit in a room with a floor made up of wood. It is just that the type of floor material you have or use affects the speed of cooling the area. This is based on the principle that cool air sinks and hot air rises which also indicates that air bounces back fast in solid surfaces. If you are lucky to have a good consulting electrical engineer, then he should be explaining how the materials of house floors affect room cooling. He should also mention other alternatives which can somehow economize the use of your AC units.

Why Do Girls Like Jerks Instead of Nice Guys?

This question is asked constantly by guys who consider themselves "the nice guy". Before answering the question, it's important to recognize the root problem of the question itself. I have a lot of wonderful, guy friends, which I would never date … WHY? They complain that they are the nice guy who girls just try to be friends with, but I know them very well and they are not so nice when it comes to women.

Any TRULY nice guy has absolutely no trouble getting together with women, and he is not always trying to get with every woman he meets, nor is he frustrated about the "hotties" not giving him enough attention, because he does not actually see women this way at all. The problem is that those guys who call themselves the "nice guys" are looking for their porn queen and want to have as many women as possible, rather than just one that would really get along with them really well and who has the affection for them . They ignore the girls that show them signs of interest because of their weight, or popularity, or whatever other shallow reason prevails them from even seeing that those girls exist. When they themselves, these self-pronounced nice guys, are not too good looking themselves.

They are too scared to walk up to a girl and ask her out, which the "jerks" are not too afraid to do. The "jerks" understand that it is just a matter of statistics, that 1 out of 10 at least girls … sometimes more and sometimes less, is going to say yes to them. These "jerks" pretend to be the nice guy and the girls often think that the "nice guy" is what they are getting. These "jerks" have more experience because they have worked harder at it and have been told by many a girl what they liked and did not like and wanted, and they have learned how to fake it just long enough to snag the girl.

Also, some girls just like excitement. Some girls would rather be riding on the back of the "jerk's" motorcycle, than sitting on your couch with you and your mom watching Jerry Springer or Oprah Winfrey or even, sometimes … Scrubs … No really …. IT'S TRUE!

If you think you are a nice guy then consider why you have so much time to cry over the girls who are going for the jerks. Perhaps it's because you are not out there living any kind of adventure. Perhaps it is because you are not spending your time asking the girls out. Perhaps you have all this time to think about these things because there are so many commercials on the television.

Truly nice guys are very rare and guys who call themselves nice reply to admit that the truly nice guys even exist, because then they would realize that they are just one of the jerks, but worse … just one of the jerks without a girl . Maybe try turning off the porn once in a while. Then you might just have a chance of figuring out what a real live girl really wants and maybe then you might see the beauty in the girl that is already out there waiting for you.

Meet Real Life Hero – Sabin Barto

The fiery crash on a warm Florida evening on July 4, 2012 left an unconscious man trapped in his burning car. Seemingly out of nowhere, a figure plunged out of the darkness through a sheet of flames to rip open the door and carry the driver to safety just moments before the car exploded. Like a scene from a movie, the Independence Day hero retreated to the shadows of obscurity, but it wouldn’t be the last time he would help someone in danger.

A modest man, Sabin Barto, doesn’t talk much about his 10+ years in the U.S. Navy. He spends his post-military career selling real estate in Florida, writing children’s books, developing a website devoted to saving the Everglades’ habitat, and getting kids engaged in environmentalism. He seems like a pretty nice, normal guy, but his neighbors and friends claim he is a real-life Captain America with superhero strength and courage. Captain America, because his heroics always seem to kick in on the 4th of July, or within a few hours thereof.

On July 3, 2016, in Naples, Florida, Barto witnessed a car crash while driving home with his daughter from a fireworks celebration with some friends. As Sabin exited his vehicle to assist the driver and passengers, a lone female police officer who had been chasing them arrived on scene. Weapon drawn, she shouted at the passenger who tried to flee to get on the ground. Surmising that this was a criminal suspect, Barto saw the driver exit and run, to which he sprang into action, grabbed the driver and held him on the ground so that the officer could properly handcuff him after apprehending the passenger. Barto stayed with the officer until her backup arrived.

Like a superhero, Sabin Barto seems to have a knack for being in the right place at the right time. That exploding car incident in 2012 took place right in front of his house.

This all brings to mind the nature of extraordinary heroism, which often expresses itself in emergencies and difficult circumstances. While most of us flinch and flee from danger, a few, like the men and women who make up local police departments across the country, dash headlong into the jaws of possible death to save a stranger. At a time when we are compelled to remind people that Blue Lives Matter, it’s bracing to know that American Exceptionalism also finds a home in the muscle, hearts and minds of Americans like Sabin Barto.

Penis Facts You Did not Learn on the Street

Sure, a guy's penis has been with him ever since he was born – but how well does the average Joe really know his favorite personal appendage? And since he learned a lot of his information "on the street," so to speak, how much of that information is maybe not 100% true? In the interests of better penal health and an informed penis-owning population, the following penal facts are presented for reader edification.

Penis facts

– A guy can not really break his penis . Although one often hears talk of a dude having a sexual encounter that goes devastatingly wrong, it's technically impossible to fracture or break the penal. That's because the penal does not actually have a bone inside it – despite the nickname boner being applied to a stiff erection. When a man does have what is called a penile fraction, it refers to a tear occurring in the tunica albuginea, the membrane surrounding the soft, spongy tissue in the penis.

– The penis does a lot of ejaculating. One source estimates that the average man ejaculates 7,200 times during his lifespan. (assuming an active sex life of 50 years, that's 144 times per year.) Approximately 2,000 of those ejaculations occurred during masturbation; whether that surprises an individual depends upon his own rate of masturbation, of course.

– And it ejaculates at an impressive speed. According to one measurement, the average rate of speed of an ejaculation is 28 miles per hour.

– More grow, fewer show. Most men tend to be growers – having a penis which is reliably small when flaccid and grows substantially when erect – than showers – men whose flaccid length is much closer to their erect length. One survey puts the figure at 79% growers, 21% showers.

– Erections do not wait for birth to begin. Thanks to advances in technology, we now know that little boy fetuses get just as excited as their adult counterparts. Males begin sprouting erections in the womb sometime around the third trimester.

– Nighttime is the right time for erections. On average, a man will get erect 11 times during the course of the day – however, 9 of those occur at night, many of them while he is sleeping.

– A guy's penis is longer than he thinks it is. Really. Men (and some women) obsess about penis size, so maybe it will make a guy feel better to realize his manhood is actually much longer than he thinks. About half of the penis is inside a man's body. No, it may not be visible, but it's there.

– Men were encouraged to eat cornflakes to stop masturbating . Through history, there have been some people who inordinarily feared the supposed consequences of masturbation. John Harvey Kellogg (of the popular cereal company) believed that his cornflakes could help dampen the sexual impulses that could lead to masturbation (as well as inappropriate fornication). However, there are plenty of dedicated cornflake fans who could testify to the fact that this plan simply did not work.

– The penis shape helps prevent impregnation by another man. Many scientists believe that the pronounced head of the penis evolved to help a man foil his rivals. It is believed that if a man penetrated a woman who had recently been penetrated by another male, the glans could help "scoop out" semen deposited by a rival before it reached the egg.

There are other penal facts a guy can not learn on the street, including the need to pay special attention to penis health on a regular basis. To do this, regular application of a first rate penis health creme (health professionals recommend Man 1 Man Oil, which is clinically proven mild and safe for skin) is required. For best results, a crème should contain both L-arginine and L-carnitine .. The former is an amino acid which helps boost nitric oxide and therefore helps keep penile blood vessels open and expanded when necessary. The latter has neuroprotective properties which can help to protect penis sensation, especially when the instrument is roughly handled.