In today’s tight real estate market, those who do choose to put their houses on the market are certainly looking for any available advantage in the tight competition they are sure to face. Finding low-cost techniques that add charm and character is one great way to accomplish this goal. The good news is that you don’t have to invest a lot into a simple fix to make your home stand out. One technique you can do yourself is drywall texturing. You can follow some simple steps and find Drywall Texturing Made Easy.
First, be sure to allot a good amount of time for the project. You don’t want to rush through this artistic process. Also remember that the room will need to be painted when you are finished. To get started, the first step is to remove outlet and light fixture plates from the walls. Cover the floor, since even Drywall Texturing Made Easy can get messy. (Also, at this point, be sure to remove any wallpaper. It will not provide an adequate base for the joint compound that you will use, and will end up becoming a time-consuming mess to fix. This is not what you want a potential buyer to see in your home!)
The first step in Drywall Texturing Made Easy is to spread a thin coat of drywall compound around the walls where you want to start with an 8-12 inch straight trowel. A thickness of about 1/8 of an inch is ideal, but for a more varied texture, spread thicker. Start with just a small area; you don’t want to compound to dry before you complete the texturing portion of the application. It’s better to under estimate the time involved than to over estimate at this step.
After you’ve spread the compound, you can make any kind of texture you want. Experiment a little bit until you find something you like. Ideas include using old paintbrushes, wallpaper brushes, sponges, or even your fingers and hands. Go ahead and have some fun at this point, but remember that less is usually more when the texture is covering an entire room. Be sure to wear latex gloves if you are using your fingers or hands. It might not be a bad idea to wear them anyway. After you’ve finished a small portion, simply continue to work your way around the room, alternating between applying the compound and texturing it.