Elements of Writing a Mystery Novel

Like anything, a mystery novel is composed of different parts, which are referred to as elements. Each are critical in capturing the readers interest. If your story is searched and well written, it is sure to be a winner. By now, you are probably wondering what the elements are. They are the science, plot, characters with settings and writing technique.

First is the science. This needs to be accurate due to the fact several mystery novel readers are wired versus forensic techniques. They can see through phony stuff in an instant, and you want to avoid that. If you can write a good story and have correct science then your book just went from decent to great.

Next is the development of the plot. This will make or break your story. It is crucial to have a plot that makes sense, is intriguing, and has many twists and turns to keep the reader not knowing what is going to happen next. The more they do not know what is coming the more suspense you will create and of course in a mystery novel, suspense is everything! If there was a part to really focus on, it would be the plot!

Following is creating the characters with stories settings. It is important to really develop them and make them something authentic. You want to have the audience relate them. This will increase the connection with the reader and makes it easier for you to write the rest of the novel. The more you know about your character, the easier it is for you to write about them. After the characters, the setting is extremely important to set the atmosphere for the story.

Lastly, the element of writing technique is significant when constructing your mystery novels. This is simply because this is part of what creates the emotion within the reader. It is good to include literary elements such as similes, personification, and metaphors. It is good to also include more advanced techniques such as suspense and foreshadowing. These are big keys when writing a mystery story. What is even more important is what is called red herrings. These will make reader think the story is going one way when it is actually the other. Incorporating these will enhance your story and make for a better read.

If you can have all these elements intertwined into your story, you are on the right track to write a great mystery novel!

Wrinkle Free Garments

Ironing the garments is considered a myth today. Our time-starved people want to spend minimum after cloth-care. Ironing the garments has lost the heat after the developments in wrinkle-resistant fabric finishes. Wrinkle-free finishes has hit the market of casual men's trousers in just five years.

The Wrinkle free quality of garment has been labeled various terms like Wrinkle-resistant, wrinkle free, durable press and permanent press. The industry also uses these terms for several finishing agents that have been appended to fabrics to avoid or reduce the amount of wrinkles.

Today's drive of wrinkle-resistant informal wear is not just a reprocessing of the dry, brittle durable press in wash and wear finishes of yesterday. The most modern wrinkle-resistant fabrics are newly devised products that were born of modern technology.

These wrinkle-resistant finishes were favored in the early 90's when they were inserted into men's all-cotton trousers. The finishes have given the root industry a new life on lease. Hagger and Farah are the first companies that introduced wrinkle-resistant pants to their bands. In 1992, Hagger introduced a line called "Wrinkle'Free" all-cotton pants. The line made a big impression on the market and by December 1993 Haggar gained 76 percent of the market in that class. Savan line is Farah's edition of the wrinkle-resistant pants. These lines of finishes were flattened with Duck Head and Levi Strauss Dockers.

Wrinkle-resistant garments are not free from problems; various troubles like attraction to grease and oil, fabric debasement and environmental interests are connected with these garments. Although, most of the problems have been reduced, companies are continuously ignoring techniques to better the properties. To improve the aesthetics is the biggest improvements.

Wrinkle-resistant garments should inevitably exist in wardrobes. After rejuvenating the bottom industry, the finish has hit the other segments of menswear industry like woven and knitted dress and sports shirts, jeans and suits. Wrinkle-resistant clothing incorporates even the children's attires and areas of womenswear market. The success of the finishes on garments will result in extra progress in other markets.

Due to the escalation of formal wear in the work place, the wrinkle-resistant industry has secured new heights in garment industry. Wrinkle-resistant garments are not only at department stores and mail order catalogs but also at stores like Wal-Mart and Kmart. The home furnishing industry has secured the wrinkle free concept by adding the finishes to sheets.

Our belief that wrinkle-resistant garments are costlier than finish-less ones is right; but for the most part they are moderately rated. All the products of wrinkle-resistant items do not give the same result. There are no inflexible courses of actions for manufacturers; since, it is suggested that customer should buy a popular brand that s / he trusts.

The wrinkle free finish (various other terms are "Easy Care", "Durable Press", "Wrinkle-Resistant", "Wash and Wear", "No-Iron" etc.) is achieved by cross-linking cotton. Permanent press finishes build cross-links between adjoining cellulose polymer chains; these provide cotton some flexibility and resiliency. Such cross-linked cotton can return to its earlier condition from deformity stresses and that wrinkles will not create.

Even today, DMDHEU is an important cross-linking force. With magnesium chloride as the acid catalyst to start a reaction, it creates cross-links in the formless areas of the fiber. Through the counteraction (> NCH2 => NH + HCHO), free formaldehyde is discharged. Insufficient curing also results into the discharge of formaldehyde at an extreme temperature. Various techniques have been evolved to define the amount of formaldehyde discharged, such as after-washing of cured fabrics, the insertion of formaldehyde scavengers like carbohydrazide to the bath, use of urea in the pad-bath or application through a spray, modification of DMDHEU to etherized, glycolated or methylated DMDHEU.

Options to DMDHEU are also being researched. Major choices are polycarboxlicacids, typically BTCA (1,2,3,4,4 Butane Tetra Carboxylic Acid) or citric acid. However, BTCA is not cheap to use and citric acid creates yellowing. Another technique has been to use polymers of maleic acid to create ester cross-links, and yet another to fix a quaternary group through an epoxidation counteraction to the cellulose chain to create cross-links. Research on all these options is in progress. Commercially, it is the remodeled DMDHEU (glycolated or methylated) that is most used now. The item is pre-cushioned to check untimely curing and also pre-merged with a catalyst. Today the catalysts with the basis of Magnesium are accepted most. When curing times are scanty, citric acid or aluminum chloride can also be compounded to speed up catalysis.

Following is a standard method for a pre-cure or post-cure finish:

DMDHEU (45%), 2-20% of weight of DMDHEU but not less than 1% owb; wetting agent. 0.1% owb; and softeners, 2-8% owb.

The wetting property lets the fiber internally penetrated, so that cross-linking may occur all through the fiber cross-section. A high-density polyethylene brings back some of the missing tear force and abrasion resistance by displacing lubrication. It also possesses a collaborative effect with silicone or fat-based softeners to create an agreeable hand. Among the silicone softeners, counteractive polysiloxanies with silanol functional end-groups (Fig 2) perform as elastomeric finishes providing better wrinkle resistance, good dimensional firmness (smooth drying properties) and exceptional soft handle with good sewing ability. They can also decrease free formaldehyde discharge by re-establishing part of the resin. Various types are available today: Pretavyl VP 1601A by Boehme Filatex Inc., and siltouch RS by Yorkshire Chemicals.

Types of Technology for obtaining "wrinkle free" finish
The dominant application techniques currently employed are based on the following processes: pre-cure; post-cure; garment-dip; spray (metered) application; and Vapor phase.
In pre-cure, the fabric is processed with resin, dried and cured in flat open-width form. This fabric can be used to manufacture garments that stand firm against wrinkling through wearing and have a soft look after washing and tumble drying. Since the cross-linked fabric defends any attempt to press in wrinkles, it will be impossible to bring in sharp long-lasting creases. Generally, such fabrics are applied in the womenswear market for some skirts, casual trousers and shirting where smoothness is the main benchmark.

A post-cure process provides a choice to manufacture a garment with soft drying and wrinkle resistant agents along with sharp creases that have a lasting effect for the life of the garment. In this treatment the resin is padded onto the fabric and discharged at low temperature (as in the Koretron process). The fabric is then cut, garment constructed and creases pressed into the garment. An extreme temperature treatment in this make up is given to cross-link resin. Although this procedure provides exceptional results, it has not been doing well with garment producers because of apparel limitations of colors, styles and fabric weight, and the requirement for a direct connection among mills, garment manufacturers and retailers.

To improve this procedure, a company in Japan applied a post-cure finish to fabric that was mercerised in liquid ammonia, giving excellent easy care properties together with the soft handle of non-cross-linked cotton. Liquid ammonia mercerisation is a process applied at ultra-low temperatures and it generates deconvolution of cotton, smoothing of the surface, swelling of the fiber to a circular cross section, enhanced absorbency, firmness and shine, and a very soft touch.

The other three alternatives are useful to finish the fabric only after it has been composed into a garment. In the garment-dip method, garments are fabricated from non-resistant fabric, then infused with a resin process similar to that applied to the post-cure process, extracted to about 65% wet pick-up and then tumble dried to 8-10 % moisture stuff, a critical factor that is determined using a moisture meter.

In the spray method, the resin is smeared by spraying it onto the garment during tumbling in an encoded revolving tool. A microprocessor is applied to gauge the accurate quantity of chemicals and to monitor the rotation time, expected wet pick-up, spray rate and process time. Like post-cure process, the garments are then pressed and cured. The process is more and more applied to both menswear and womenswear with the market moving towards washed-down appearance and softer handles.

In the vapor phase process, the fabric is dried and finished at the mill, cut sewn; before cross-linking, it is press into garment form. Gaseous formaldehyde is then used with an acid catalyst in a particular chamber oven. The garments are later processed to create cross-linking. Then the surplus moisture is drained. The formaldehyde itself creates the cross-links (conventional resin will always have unreacted N-methylol clusters that can hydrolyze to discharge formaldehyde). Manufacturers of shirts and other lightweight garments are using the treatment today. Neverheless, it is apparently not easy to manage, possibly resulting in uneven processes and higher strength losses.

Choosing fabric for "wrinkle free" finish

The garment finisher generally does not produce its own fabric and it may have to cope with unwelcome damages in tensile strength, tear strength and abrasion resistance in the fabric when cross-linking. Due to the added value, garments are returned since low strength might prove to be costlier than fabric returned.

For manufacturing an up-to-standard wrinkle-free garment, various safety measures must be taken in fabric choice:

. The root fabric must possess enough strength to put up with 40-60% loss in tensile and tear strength and still hold sufficient strength to provide a garment of satisfactory wear life and lastingness.
. It must also possess exceptional absorbency to let resin enter the very center of the fibers and create cross-links. Surface adhering resins do not give any useful results and are incompetent and causing waste.
. If the fabric is dyed, the dye must be able to hold acid catalysis and high temperatures. Sulfur dyes, which are recognized to produce acid upon storage, are to be completely avoided.
. Residual extractable on the fabric (like starch from size) can counteract with resin and minimize its influence; a high amount of size removal is so critical.
. Fabric pH should be between 6.5 and 7.0 with an alkalinity of less than 0.05% (expressed as sodium hydroxide).

Choice of equipment

Producers and researchers are continuously evolving tools to serve to this specialty section. But they are still perplexed if these new machines – specifically presses and curing ovens – are worth the investment. While selecting the technology, many features such as type of product (shirt or trouser), WR procedure, time, vacuum, temperature and chemicals must be taken into account.

The two most decisive factors working behind "A" quality pressing of 100% cotton and permanent press garments are temperature and control of cycle. Presses should be prepared with high-heat, cast aluminum

garments are temperature and control of cycle. Presses should be prepared with high-heat, cast aluminum heads or with additional electrical heaters to provide a processing temperature about 150 degrees centigrade. Since the temperature sets out the curing procedure and monitors the overall smoothness, it is very important to manufacture permanent press garments. Typically, presses active in garment factories function within the range of 116-125 degree centigrade will not provide a perfect finish.

Hoffman and Vapor-press International have introduced the latest range of pressing machines wherein microprocessor monitors both temperature control and pressure applied accurately. A feature called head-hesitation holds up the head lifting so that creases are not formed on the garment – such creases can set forever while curing. As a safety measure, a head positioning set up lets the head lift by an inch (after pressure is applied) allowing a vacuum to dry the garment completely. Pre-timely interference by mechanics is a major problem in garment factories. This complication is enhanced by an Operator Penalty System that counts penal points every time an operator attempts to disrupt the cycle.

Curing is generally performed in hot-air-box or tunnel ovens. A tunnel oven is faster but needs a specific amount of garment development and a material handling system to and from the tunnel. Airflow design in these ovens monitors temperature variations, movement of the garment and wrinkle relaxation, and is there before the most significant selection standard. Pladrest Heating Ltd., founders in this line of work, has surfaced with a series of ovens to permanently press garments. The air velocity is regulated at last, in as much that temperature variation has been shot down to a noticeable 3 degree Centigrade over a single garment. Evolutions are also on the go to improve microwave-curing technology. As against average convection curing, the temperature increase in microwave ovens is supposed to be faster, consistent through the fiber cross segment, and to give a minimum damage to the fiber.

How to Install a Brick Paver Sidewalk

Installing brick pavers can produce a multitude of patterns and colors, all chosen by the DIY’er. There are just tons of brick paver sizes, shapes and colors available at home centers and masonry suppliers today. Make sure you take the time to visit several sellers before picking out the final products for your walkways. Installing a paver walkway is not very difficult but does require a good deal of manual labor. If the walkway is not directly adjacent to an area that the pallets can be placed when delivered, then the amount of labor increases as you have to move the pavers over a distance to the actual work area. This is the area of work where friends can be a great help.

Start your project by laying out the walkway itself. A garden hose is an excellent tool for layout if the new walkway will have curves. Layout the hose as close to the shape as you desire and then fine tune it until it is exactly correct. Using regular lawn lime and a paper cup, mark the hose location and that will be one side of the new walk. Wash the hose and make sure you wash the lime from your hands. It is great for lawns and eco-friendly. A handy tool you will use over and over is to cut a two by four, six inches longer than your walkway is wide. It can be used during layout to assure you have prepared a wide enough area for the pavers and then as a screed board to level the base sand under the pavers themselves. Now, remove the soil, gravel, earth, etc. from the walkway area plus at least three inches on each side. You want to excavate the walkway at least two inches deeper than the thickness of the paver stones. If you want the stones to be flush with the adjoining lawn or driveway, measure the stones thickness and add two inches and excavate to that depth.

Once the excavation is completed, you will place at least two inches of stone dust or concrete sand in the bottom of the excavation. Using your two by four screed board and a carpenters level, level the sand keeping it slightly higher than what you want the finished product. Once the sand is in place, a gasoline powered mechanical tamper must be used to thoroughly compact the sand. Keep in mind that the sand will settle when compacted and additional material may have to be added across the walk to attain the final finished compacted height. You want to be very fussy when doing this work. The final walkway surface will reflect whatever defects you have left behind in the way of dips or bumps in the sand. Make sure the compacted sand/dust is at least three inches wider on each side than the finished walkway width.

Using a string line to maintain the location of one side of the walk is always a good idea. If one side is straight the other side will follow. Start laying your paver stones in whatever pattern you chose. Straight line, lap bond, diagonal, herringbone or any pattern you can think of is fine. Work across the full width of the walk and if you have a helper using a wet saw, cutting and placing any smaller pieces will greatly speed the work. As you complete an area, install a plastic brick edge retainer strip along with the supplied ground nails or stakes. Holding the retainer as tight to the pavers as possible, drive the ground nails into the ground securing the retainer strip in place. This prevents any sideways movement of the pavers. Proceed with paver installation until all pavers are installed.

Using whatever material you used as a sub base for the walkway, cast this material across the top of all the pavers and using a good stiff broom, sweep the sand/dust back and forth and diagonally over the pavers forcing as much material down into the joints as they will accept. When using stone dust, many contractors will also soak the dust making it settle even more tightly into the joints. You must now run compactor back and forth over the entire walkway surface. The compactor will not only settle the sand/dust into the joints it also pushes the pavers down into the sub base locking them into place. Use some hearing protection during this phase as it will be very, very noisy.

Once the paver compaction work is complete, go ahead and replace whatever the surrounding area materials were. If it was lawn area, topsoil and seed the disturbed areas, burying the plastic retainer strip as you proceed. A brick paver walkway will last your lifetime and will become prettier with age.

Pete Ackerson

http://www.Wagsys.com

BICES-Building Inspection & Code Enforcement system software

How to Play Happy Birthday on the Guitar

Learning to play simple and fun songs on the guitar is easy. Many of my students have learned how to play Happy Birthday in their first lesson. Follow the simple steps below to learn this song in just a few minutes.

Learning to Play the Notes

To play Happy Birthday on the guitar, you first must learn how to play an open string (no left hand fingers pressing the string down to the fretboard). To do so, position your right hand over the sound hole and strike the first string (thinnest string) either with the tip of your right thumb or with a pick held between your right thumb and the outside edge of your right index finger. (You can also pluck the string with one of your right hand fingers by hooking the tip of the finger under the string and then plucking the string to sound the note.) Say "0" each time you sound the note because that is the number for the note played when you play an open string.

Except for open string notes, playing all the other notes requires holding a string down at one of the frets with the tip of a left hand finger. Press the tip of your left thumb to the back of your guitar and arch your left hand fingers so that you roughly make a "C" shape between your thumb and index finger. With the tip of your index finger, practice pressing the first string down against the fretboard with your fingertip very near each of the first four frets (but not touching each fret. As you press the string down at each fret, sound the note the same way you did for playing the string open. In order as you play these first four frets, say the numbers one through four because those are the numbers for each of these notes.

Once you have learned to hold the string down at the first four frets to play notes one through four, move up the neck of the guitar and do the same thing with the next four frets. Say the numbers five through eight as you play these notes. Finally, move again to the next four frets and practice sounding these notes. Say the numbers nine to twelve as you play them.

Counting the string played open, you now can play thirteen different notes on that string and say the number for each note as you play it! You now know all the notes for playing Happy Birthday on the guitar. Most guitars are marked with a dot on the fretboard at the fifth, seventh, and twelfth frets, so finding the right fret for each numbered note is not hard at all with just a little practice.

Playing the Song

You will now learn to play Happy Birthday on your guitar in four groups of notes. Use your ear to guide you about the right timing as you play each group of notes. Play the first group of notes (0 – 0 – 2 – 0 – 5 – 4). Play the two open notes faster than the other notes. In fact, you will play the first two notes of each group faster than the other notes in each group.

Then play the second group (0 – 0 – 2 – 0 – 7 – 5). The first four notes are the same as in the first group, so memorizing the first half of the song is easy.

Play the third group next (0 – 0 – 12 – 9 – 5 – 4 – 2). Finally, play the fourth group (10 – 10 – 9 – 5 – 7 – 5). Practice the song until you can play it smoothly on the first string. With just a little practice, you can easily learn how to play Happy Birthday on the guitar by following these steps!

Playing in Other Keys

Because you are playing by fret numbers, you can play this song on any of the strings. Except for the sixth string, which has the same notes at each fret as the first string does, playing Happy Birthday on the other strings changes the song to a different key. You have now learned how to play Happy Birthday on the guitar in five different keys!

What To Expect When You Buy a Turnkey Website

Buying a website business online can be slightly intimidating. In fact, buying anything online can be intimidating if you have never done it before. Whether you are buying a turnkey website or a teddy bear for your granddaughter, you never see the seller face-to-face and must rely on consumer review websites to determine if a purchase is a good idea.

The first quick signs of a good retailer is if they have a way to reach them via their website, they have a good selection of different niche websites, and the domain name of the turnkey website seller is older than a year or two (this indicates that their business practices are honest and what is promised is delivered, thus keeping them in business longer than a few months). Click here to read more about how you can find an honest turnkey website seller.

The first step to purchasing a website business is probably the easiest part of the purchasing process. This step involves the buyer (you) authorizing a transaction through an online payment gateway or sending money the old fashioned way, through a money order. (Take note that money orders are the safest and most reliable way to send money off-line. Cashier checks, especially checks drawn on banks you are unfamiliar with, are not full-proof secure and sometimes may be fraudulent.) But with that disclaimer aside, I prefer to use online payment gateways (PayPal is my preferred method, Google Checkout a close second) to send money when purchasing turnkey website businesses.

The payment process will be a bit different depending on if you use Google Checkout, PayPal, or another online payment gateway. But there are some common elements to all online check-out procedures: You will need to enter your information (name, credit card number, etc.) or you can sign-in if you already have an account with the payment processor (PayPal, Google Checkout, etc.) After you submit your information, you will usually go to a payment confirmation screen. Once you confirm your purchase, you will receive a confirmation message to the email address you entered in during the check-out process (or the email address you have associated with your existing account that you logged in with). The seller will also receive an email notifying them that a payment has been received, the amount, and the item number or product name.

Using payment systems like PayPal, Google Checkout, or Moneybookers is simply an easy, quick, and secure way to transfer money online. Like Visa and other large credit card companies, these online money transfer systems are built with a high level of security and send your information through securely encrypted channels to ensure your privacy. If you use a service like PayPal or Google Checkout, you can be assured that your money and information will be safe.

The second step takes place once you hear back from the turnkey website seller. Do not consider a sales confirmation from PayPal or another payment gateway company to be an actual response from the company. Companies usually respond within 24 business hours; some respond within just several hours and some may take longer depending on time difference and sales volume. If you feel the time to get a response has been too long, don’t hesitate to contact the company via email or on their website contact form.

When you do hear from the company, the email will most likely contain information for these four important next steps:

  • How to update your affiliate program link information
  • How the domain transfer process will work
  • How to login to your cPanel
  • What type of hosting is offered

(If you purchase your website from a reputable turnkey website retailer like ABC Design Studio, you should receive domain name and hosting for free or at a discounted rate. Click here to browse ABC Design Studio’s turnkey website businesses.)

You should carefully read this email and the instructions so you fully understand what is required of you so you can take ownership of your business. Don’t wait too long and don’t hesitate to ask questions if you need to. But keep in mind that a turnkey website broker, no matter how reputable, cannot be held responsible for your lack of action!

Many of the things that you will need to do is sign up for affiliate accounts (like Google AdSense, Commission Junction, or ClickBank) This process can take some time depending on how many affiliate programs your new turnkey website uses. If you are not computer-savvy, and your website links to multiple affiliate programs that are confusing for you, expect to spend 1-2 hours to complete your affiliate program accounts and to send an email back to the seller with your affiliate account information. Some companies have you submit your information via a form, which is generally more secure than an email. But both options work just fine.

The seller company will probably also give you instructions on how to set-up an account at a domain retailer like GoDaddy or HostGator. This is because, after your website is set-up and updated, you will need to take ownership of the domain name. The easiest way to do this is to transfer ownership from the seller to you through a popular domain seller website service such as GoDaddy.

The third step to this process happens after you receive an email from the turnkey website company letting you know the affiliate program link integration is complete, your hosting account is set-up, and your domain name has been transferred to you. If the company you bought from uses GoDaddy – the biggest online retailer for domain names and digital domain related products – then you will have to log-in to your GoDaddy account to accept the transfer.

After you accept the domain name transfer, your website has been successfully turned over to you. You can verify your ownership by visiting http://www.whois.net and typing in your website domain name. Do allow for a little bit of time for the WhoIs database to update its records. WhoIs may take anywhere from a few hours to a few days to reflect changes in website ownership.

After you have received ownership of the domain by following the steps outlined by the turnkey website seller or the domain company (GoDaddy, HostGator, etc.) – and you have verified ownership with WhoIs – you are now the official owner and operator of a website business!

Of course your work is not done. This is just the beginning in your journey in using a turnkey website business to make money online. The next steps are marketing, promotion, and learning how to bring targeted traffic to your site, which I will cover in future articles.

When it comes to the turnkey website purchasing experience, every company is different. But there are certain common themes in the purchasing process. If at any time you are unsure of what you must be doing or do not know how to finalize your website’s ownership transfer to you, never hesitate to contact the company you purchase from.

The more information you have and the better you understand how the website buying process works, the more comfortable and confident you will feel with the decision you have made – to become an Internet entrepreneur and work for yourself.

Sloppy, Good Track, Or Muddy Track Handicapping Tips

Even though many horse tracks have switched over to the synthetic surfaces that aren’t affected as much by moisture, there are still some dirt race tracks left in the United States. Knowing how to handicap an off track rated as good, muddy, or sloppy, can save the day. Betting on horses racing on a fast track is risky enough, but betting on an off track adds one more dimension.

The best advice seems to be, if the track isn’t fast, don’t bet the races. But if you want to try your hand at handicapping an off track and picking winners, here are some tips. First of all, since the race tracks in the United States don’t tell you how much moisture is in the track in any scientific or quantifiable way, you must be the final judge of the track condition.

I have seen tracks with puddles of water, that were obviously sloppy tracks, rated as good. On the other hand, I’ve seen muddy tracks rated as fast. So you must make up your own mind and remember that subjective terms like muddy, or sloppy, are just that, subjective. They are an opinion, not a fact.

Muddy tracks are not fast tracks, but sloppy tracks often are. On top of that, each dirt race track has its own peculiar way of reacting to moisture. Some drain toward the rail and therefore favor outside runners. Others are crowned and favor mid track post positions. Once again, it is up to you to know the track you are playing. What you must do is to suspect a bias and then quickly verify it.

While you are playing the track, you must also be aware of how much rain is falling, if it is still raining, and how the track may change from race to race. If this sounds difficult, you’re right, it is. Not only must you handicap the horses, but on a day when the weather is inclement, you must also handicap the track surface. I advise keeping meticulous notes so that when the situation arises, and it will, you can take advantage of it quickly.

Just as we look for situations that repeat themselves with horses and trainers, we look for weather situations that repeat and create a track bias we have seen in the past.

Small Fireplaces – Gel Fuel, Electric, Wall Mounted or Digital?

Although most of today's homes no longer rely on a fireplace for heating purposes, they are still in high demand. Fireplaces will always have a special allure. The vision of cozying up in front of a roaring fire, mug of hot chocolate in hand, while snow falls gently outside the window or sitting in front of a rippling fire while you and your beloved spend a romantic evening together are two appealing scenarios that may come to mind when thinking of a fireplace. If you live in a small home, apartment or condominium, you may not have the luxury of a built-in fireplace. However, today you can purchase a fireplace that would fit into even the smallest of spaces. There are various options to choose from.

These include:

  • Virtual / Digital fireplaces
  • Compact fireplaces
  • Wall-mounted fireplaces
  • Tabletop fireplaces

Whatever your style leans more toward modern, contemporary or anywhere in-between, one of the above-mentioned fireplaces would suite it perfectly.

Electric or Gel Fuel Fireplaces

When looking into purchasing a fireplace for your small space, you will discover that some use gel fuel and others electric. The advantages are both eco-friendly, do not require venting or special hook-ups and are clean and odor-free. However, you may want to consider the cost and convenience of both before making a particular small space fireplace purchase.

Gel Fuel

Each gel fuel can lasts approximately 3 hours. They come in a case of twenty-four and cost $ 65 on average. By doing the calculations, it can be determined that one case of gel fuel will last around 72 hours. Due to the cost, most retailers will inform you that small fireplaces that run on gel fuel are mainly for decorative purposes rather than heating.

Electric

The advantage of purchasing a small fireplace that runs on electricity is the ease of use. It is also unnecessary to spend your valuable time (not to mention gas), to make trips to the store to get what is required to keep the fireplace going. The disadvantage is that your electric bill may increase significantly. However, this can be remedied by monitoring the amount of time the fireplace is in use.

Virtual / Digital Fireplaces for Small Spaces

Many may not consider a virtual fireplace as a serious fireplace option. However, before it is written off completely, it should be noted that today's technology has bought the virtual fireplace a long way from the mock fireplaces of yesteryear. Today's virtual fireplaces are basically a DVD that you put into your television or personal computer that creates a realistic illusion of a crackling fire. The DVD loops around and plays continuously until you turn it off.

Depending on your expectations, you may find yourself disappointed either by the quality of the video or that it is just not "real" enough for you. However, a virtual fireplace is perfect for small spaces. If you have room for a television or computer, you are already one step closer to having a fireplace. It may only be a facsimile of the real thing, but it is worth looking into if you have limited space and you want to add an ambiance of romance or the cozy cozy that adds a room.

Compact Fireplaces Made for Small Spaces

A normal size fireplace is around 40-50 inches wide. Those in the range of 25-35 inches wide would classify as a compact or small fireplace. Most traditional fireplaces are available only in floor models. Compact fireplaces are wonderful space savers as many are designed as corner units.

Wall-Mounted Fireplaces Perfect for Small Spaces

Wall-mounted fireplaces obviously take up no floor space. For that reason alone, a wall-mounted fireplace would have considered the ultimate in space saving design. If your style in décor is traditional, you may have difficulty finding a wall-mounted fireplace to suite your taste as most have a contemporary look and feel. However, as wall-mounted fireplaces increase in popularity, it is probable that the selection will grow offering more variety in design.

Tabletop Fireplaces Uniquely Designed for Small Spaces

Tabletop fireplaces are in one word "unique". If you are not wanting a floor model or wall-mounted fireplace, but you desire a small fireplace that is not only fun, but also out of the ordinary, then a tabletop fireplace may be just what you are searching for.

From a smokeless glass-fire tabletop fireplace made specifically to enhance the view of the dancing flames to a contemporary tabletop fireplace with stainless steel logs mounted on a slate base, these small scale fireplaces are miniature works of art that are bound to be great conversation starters .

Today, there are various options to choose from to have a cozy romantic fireplace in even the smallest of spaces. From compact, wall-mounted, tabletop, to a virtual / digital fireplace, there is sure to be one to suite any home or even office décor.

Pros and Cons Of Door Hanger Marketing

There are many pros and cons when it comes to using door hangers for your marketing and advertising needs. Here are a few examples of why.

PRO – They are personal. Some people appreciate this aspect of door hanger marketing. They need to be hand delivered, which shows effort and care on the part of the advertiser or company. This is great, especially when you are trying to motivate a specific target market of people. Custom hangers are great for local marketing. Local events, campaigns, etc. can all be promoted positively with printed door hangers.

CON – A lot of people who receive see them as an automatic throw away piece. Because there are so many postcards, flyers, and other types of advertising materials that come through the mail every day, you really need to make your hangers stand out in a positive way. This is why the design phase of your door hanger creation is so important, you must catch someone’s attention before your creation ends up in the trash can. Also, there is no envelope for a potential customer to open or other piece to distract them or make them look twice. So, this is why the look and design of your door hangers means so much.

PRO – They are one of the more unique pieces of advertising materials you could choose to use. While you do have the “throw away” hurdle to overcome, if you do a great job during the design phase, you will end up with a beautiful, unique hanger to distribute. This is definitely a pro. If you can grab attention and deliver a powerful message, yours will be a definite success.

CON – Some people view them as a weaker form of marketing material due to their lack of reach. Due to their delivery demands, hangers just cannot get to as many people as say, a postcard that goes through a stamping machine. Because each door hanger needs to be hand delivered, the amount of people you can contact is going to be smaller. Direct mail pieces are going to be able to reach more people due to their delivery method alone. This is why door hangers are great tools to use when you are trying to contact a local group of people.

Overall, they have several pros and cons but ultimately they are best suited to promote a local business or organization and be distributed to homes in the surrounding area. You are going to get the best response this way, especially if you design your door hangers well and make the consumer feel as though you care about them and value their business before they have decided to give it to you.

Sanitation in the Workplace: Prioritizing Health and Safety

There are some factors that should be considered for a business to run smoothly and for goals to be met fully. It can be a challenging task for a business owner to ensure that all of the factors such as the finances, equipment and supplies, as well as the employees are working together. Yet, one of the critical factors that should be taken into consideration is the health and safety of all the employees working for you, in any way. There are some precautions that you need to do in making sure that employees are safe and they know how to keep their self secure and protected. Also, everyone should be trained on how to deal with unexpected situations.

For a business venture to run smoothly, one of the things you can do is to be able to create and maintain a positive work environment where everyone can work smoothly. The workplace can be more inviting to customers and clients if they see that every employee is having fun doing their jobs through their happy expressions. Having employees enjoy their work can also make them be more productive and accomplish their tasks faster. Stress is eliminated if one works in a workplace having positive vibes. Thus, employees can be more motivated to do their tasks and enjoy every bit of time that they work.

The health and safety of everyone can be acquitted through sanitation, which is one of the factors. One way to sanitize the work environment is to provide the area with products for hygiene such as sanitizers to ensure that the spread of germs is avoided at any means possible. One example is during the winter season. At this time, there is a high probability that employees get illnesses such as colds. So, sanitation is needed in order for germs not to spread more and to keep everyone safe from acquiring some illnesses. Another way of keeping the workplace and employees safe is to have labels. Say, there are hazardous materials in the workplace; every employee should have made aware about it.

In cases that your business is on construction, make sure that every worker is provided with all the safety equipment as they work. They should always wear the appropriate attire for the job. By doing so, you can make sure that they are safe from getting any injury as they work. There should also be signs on danger areas for everyone to be aware.

Of course, there is also a need for the management to have employees trained on how to react during emergency situations. There may be unexpected situations such as earthquake that might happen so employees should be trained on how to deal with situations as such.

A business can be successful if every aspect is checked and maintained. One of the factors that can greatly affect the business is the employees. Thus, maintaining the health and safety of employees is a need. This can be done in many ways such as sanitation as well as giving them training in order to deal with unexpected situations right.

Common Defects Found in Timber From Timber Merchants and Their Causes

We’ve all heard the horror stories of timber arriving and only half of it being usable. We thought we’d have a quick look at some of the reasons timber can be defective.

Cupping.

Cupping is literally when tangential-cut boards experience shrinkage due to the growth rings swelling faster at the heart, causing them to bow. Radial-cut boards are therefore a safer bet as their shrinkage will be less noticeable.

Knots.

Knots are often a good indicator of the quality of the timber. The fewer knots, the higher the grade of timber. Knots are evidence of where trees have started to grow branches that got broken off (branch fail!). Knots only tend to dramatically affect the strength of the timber if they are “dead knots”, or knots that have become loose.

Shrinkage.

As the cause of cupping mentioned above, shrinkage occurs as timber continues to lose moisture content. The drying process increases timber strength, but continued drying often leads to shrinkage.

Bowing.

Imagine a sagging shelf. Incorrect storage or even the board’s own weight if ill-supported can cause gravity to pull it down in the middle.

Splitting.

Like the fraying ends of cloth, splitting starts at the end grain and carries on through the board.

Shakes.

When enormous pressure builds up under the earth, fault lines are present where the earth’s tectonic plates slip past each other due to huge pressures. In trees, when growing (either non-uniformly, or sometimes due to frost) or seasoned, the release of internal stresses, and subsequent “crack!” result in shakes. Shakes can go all the way through the diameter of a tree, making a lot of its wood hard to use. It’s not always apparent until sawing that this fault exists.

This is by no means a comprehensive list of timber defects, but covers a few of the most common you may come across.

Minimising Wastage

Of course, the more timber you have that can be used, the less wastage there is and the further your money goes. Timber that consistently suffers from any of the above defects delivered time and time again is going to give any company a bad name.

Some merchants will simply ship you out what’s in stock, no matter what state it’s in. Merchants that commonly do this aren’t usually concerned with repeat business and you might find you have a hard time getting things rectified, with staff not wanting to know.

A merchant that prides itself on delivering quality timber will have rigorous quality control procedures and mechanisms in place. These should include the timber merchant company buyers visiting the sawmills that the timber is imported from and hand-selecting the timber that they know their clients will be able to use.

Because this is a time-intensive process, prices may be a little higher from a reputable timber merchant, but you’ll be able to use 99% of the timber you receive, rather than 50-60% in some poor cases, for which you’ll end up paying more in the long run in time and money.

Building Sales Skills – SINALOA – Safety in Numbers and Law of Averages

Many years ago I was sitting in a big hall, with a lot of people, listening to a famous speaker, salesman, and marketer named Larry Thompson. He said that there is a little state in Mexico called Sinaloa and that before we left that room we would lock that into our brain and never forget it.

I thought, "Oh yeah, as if !!" but more than a decade later I still remember.

It represents one of the most basic lessons in sales that anyone who is going to sell anything, or who works with marketing, needs to know.

He said it is the name of a town but also an acronym, SINALOA, It stands for Safey In Numbers And Law Of Averages.

What does it mean? It means that you will never be secure in sales if you do not have numbers working for you rather than against you.

If you need to do 5 sales a week you have really good people to talk with then talking to 5 may give you the results you need but ….. if just 1 person does not go forward then you fall short of your goal.

If you expect everyone to buy from you but you still talk with 10 then you only need half to commit and you will achieve your numbers.

If you want to be successful you need to have lots of prospects, lots of people to talk to, lots of people thinking about what you are offering and a lot of people who are seriously considering taking what you offer.

It gets back to the old adage, "the harder you work the luckier you get."

Jim Rohn, the motivational philosopher, says "If you're the best salesman and you close 9 out of 10 people you talk with, and I'm new and I close 2 out of ten, then we can have a competition and over a month I'll beat you. Why? Because I'll talk to more people than you do. If you talk to 10, I'll talk to 100, you'll get your 9 and I'll get my 20. "

This is what Safety In Numbers means.

The second half of the acronym is LOA – Law Of Averages.

It works like this; if you sell widgets and make $ 100 for very one you see then have a profit number to work with.

If you're going door to door then, if you have a good product, a normal sort of exit is that for every 10 doors you knock on 3 people are likely to agree to look at what you offer.
If you then present to those 3, and do it well, then you are likely to make 1 sale.

Now the question – If you make one sale that day then have you made $ 100 on the sale or have you made $ 10 from it?

It you need to knock on 10 doors to get enough prospects to be able to make 1 sale then knocking on 20 doors you are expecting to make 2 sales, $ 200. If you think about this and realize that final profit is directly related to the number of doors you knock on. You need to knock 10 doors to make $ 100 then you are actually getting $ 10 per door.

You knock the first door and they say "No, we already have one".
You say "Thank you for the $ 10".

You knock on the second door and they set up a time to look.
You say "Thank you for the $ 10".

You knock the third door and they yell at you and call their dog to attack you.
As you run out the gate you say "Thank you for the $ 10".

This is the Law Of Averages.

These two things are very basic and we are all familiar with the idea but we need to keep them close to our heart if we are going to be successful in the long term.

A little state of Mexico, SINALOA, that few of us will ever visit, is a guide to us in a career in sales and marketing.

Massage Oils – Advantages & Disadvantages

Grapeseed Oil

Grapeseed oil is the most widely used oil for body massage. It is finely textured, smooth and free-flowing. It is high in linoleic acid (E.F.A.) and contains some vitamin E.. This will nourish the skin and allow it to store for longer, vitamin E. being an antioxidant prevents rancidity.

Advantages

o Smooth hence good for full body massage.

o Provides good slip and is easily absorbed.

o Suitable for all skin types and areas

o Cheap and readily available.

Disadvantages

o Usually produced by hot extraction, has lost a lot of its beneficial properties.

Sweet Almond Oil

Sweet almond oil is a pale yellow, thick liquid that mixes well with most other carrier oils and essential oils. It is rich in nutrients, such as unsaturated fatty acids (EFA), and also contains a high percentage of vitamins such as A, B1, B2, B6, D and E. It is excellent in treating psoriasis, eczema and dermatitis due to its vitamin E. content. It also has some anti-inflammatory properties, which allows it to be beneficial to conditions such as sunburn.

Advantages

o Stores well due to vitamin E. content

o Cold pressed therefore relatively pure.

o Has protective and nourishing qualities to the skin

Disadvantages

o Not suitable for full body massage on its own, becomes too sticky.

o Expensive

o Contra-indicated in diabetics, and those suffering from nut allergies.

Wheatgerm Oil.

Unrefined wheatgerm oil has a strong odour, which many people find unpleasant. It contains high levels of vitamin E., which is a natural antioxidant. Although expensive wheatgerm oil is the richest food source we have of vitamin E.

Advantages

o Moisturisers dry/mature Skin.

o Good for reducing scar tissue and stretch marks.

o Relieved symptoms of dermatitis.

o When added to an aromatherapy blend will help prevent oxidation.

Disadvantages

o Too thick and sticky for use on its own.

o May cause allergies, as it is a protein.

o Contraindicated with celiac sufferers.

Evening Primrose Oil.

Evening Primrose oil is an expensive oil, but has excellent moisturising benefits. It contains linoleic acid, and gamma linoleic acid (GLA). Also contains some vitamins and minerals.

Advantages

o useful for dry skin conditions such as eczema, psoriasis and dandruff.

o Useful for PMT, period pains, arthritis and rheumatism.

Disadvantages

o Too expensive for use on full body.

Avocado

Avocado oil is a highly penetrative oil, rich in essential fatty acids, and also has a high vitamin content. It contains vitamin A. vitamin B. and vitamin D.. It also contains proteins and fats, and the minerals potassium, phosphorus, magnesium and calcium. It can be mixed in a small ratio (10%) with other carrier oils, and is commonly used in beauty care.

Advantages

o Stores well.

o Emollient

o Unrefined,

o Viscous-but still penetrates the skin deeper than most carrier oils.

o Has healing properties-helps reduce inflammation (beneficial to psoriasis/eczema).

Disadvantages

o Can become too sticky during massage-blend with another carrier oil.

o Has a strong smell.

Jojoba Oil

Jojoba is actually a liquid wax, not on oil. It is a nutritious oil containing vitamin E., minerals and proteins. It is beneficial to many conditions as its structure is similar to sebum, therefore it can be used on oily or dry skin. Unlike many oils, it can be heated to high temperatures and still retain its nutrients.

Advantages

o Nourishing-beneficial to all skin types.

o Highly penetrative with anti-inflammatory properties-excellent for acne, psoriasis, eczema and arthritis.

o Helps control the release of sebum, useful for seborrhoeic skin conditions.

o Stable-does not evaporate or react with air.

Disadvantages

o Very expensive-use small amounts, mixed with another carrier oil.

Calendula

This is an infused oil produced by maceration for its medicinal properties. It contains anti-inflammatory, antispasmodic and healing properties. It is generally used for medicinal purposes on specific areas.

Advantages

o Very suitable for skin problems-chapped skin, eczema, bruising and sunburn.

Disadvantages

o Very expensive.

o Not as pure as cold pressed oil due to maceration process.

Macadamia

This is a stable, fine textured cold pressed oil, and is available either refined or unrefined. In either case solvents are not used and the oil retains its natural properties.

Advantages

o Emollient

o Contains palmitoleic acid (found in sebum), good for oily and dry skin conditions.

o Help prevent ageing, good for driving wrinkled skin.

o Good keeping properties, lasts a long time before becoming rancid.

Disadvantages

o Very expensive.

o Has slight aroma, nutty smell.

o Contra-indicated on clients with nut allergies.

Peach kernel.

This is cold pressed from the kernels of the fruit. It is similar in appearance and chemically to apricot oil and sweet almond oil. It is finely textured and rich in vitamins a, B1, B2 & B6. It is especially ideal for facial blends, since it is kind to the skin and easily absorbed.

Advantages

o Keeps well.

o Protects, nourishes and moisturises the skin.

o Useful for dry skins and eczema.

o Helps relieve itching, so can be useful for psoriasis.

o Good for sensitive skin.

Disadvantages

o Expensive

Fix Modern Warfare 2 Black Screen

Many PCs running Modern Warfare 2 have encountered a problem of black screen during the game play. This short article will help MW2 lovers to fix the problems and enjoy game without any glitches.

Follow the instructions mentioned below to fix MW2:

Change Desktop Resolutions
Close Background Applications
Configure Sound Acceleration
Fix Modern Warfare 2 Registry Entries
Re-Install Modern Warfare 2

Change Desktop Resolutions

Modern Warfare 2 black screen appears due to improper resolution configuration. To set proper resolution follow the steps below:

Right click on empty area of ​​your desktop
Click on Personalize
Click on Display Settings
Change resolutions to 1024X768
Set colors to 32-bit High
Click OK

Close Background Applications

To avoid MW2 black screen make sure that before launching the game you have close unnecessary background applications. Sometimes running other programs along with game may prevent you from playing the game smoothly.

Follow the instructions below to close all the background applications:

Hold Windows key and press R
Type msconfig command in Run search box and press Enter
Click on Startup tab
Click on Disable All button
Now click on Services tab
Check Hide All Microsoft Services box and click on Disable All button
Click OK
Restart your computer

Configure Sound Acceleration

Improper sound configuration for Modern Warfare 2 may result in game crashing, freezing and black screen. For proper configuration of sound acceleration follow the steps below:

Click Start and open Control Panel
Click on Sounds and Audio Devices icon
Click on Volume tab
Click on Advanced under Speaker Settings
Now click on Performance tab
From here reduce the hardware acceleration to basic
Click Apply and OK

Note: Bring the sound acceleration settings to normal after playing the game.

Fix Game Registry Entries

If the registry entry of Modern Warfare 2 gets corrupt this may result in a black screen problem. In order to resolve the problem you need to install a registry clean program to fix the MW2 registry entries. It can be done manually by opening registry editor. But any wrong step may result in crashing of Windows. Therefore you should install a Registry Cleaner program as it automatically repairs corrupt registry entries.

Re-Install Game

MW2 black screen issue may appear if the installation files are corrupt. Installing MW2 again may resolve the problem. Follow the steps below:

Open Control Panel
Click Programs and Features
Select game and uninstall
Follow the instructions
Before restarting the PC delete the MW2 folder from C:
Restart your PC
Install the Modern Warfare 2 again

How to Build a Brick Wall

There is something about constructing walls that gives individuals a sense of fulfillment. This is the reason why that even though you can appoint a bricklayer to do the job for you; you feel that you want to try to build your brick wall yourself. Whether you plan to pursue a professional bricklaying career or just want to enjoy it as a pastime, constructing a brick wall needs careful study of the basics of brick wall construction.

MATERIALS THAT YOU WILL NEED IN CONSTRUCTING A BRICK WALL

You need to gather all the materials that you need to build your wall like a mortar mix, jointer, level, hammer, H2O, brush, wall ties, tape measure, nails bricks, trowel, shovel, line and wheel barrow. You also need to wear safety equipment at all times so that you will be protected from any untoward accident.

The trowel, which is a triangular metal shaped material is the main tool that you need to make your wall. You will need a trowel to even spread the mortar mixture as you assemble the bricks to make a wall.

STEPS IN BUILDING A BRICK WALL

A mortar mix is ​​mud-like concoction wherein the bricks are place in. To create a mortar mixture, you need combine fifteen to twenty scoops of sand and 1 seventy-pound container of mortar mixture. You will also need five gallons of H2O but it is advisable to combine the dry ingredients first before pouring water.

Place 1 gallon of H2O at a time until you achieve the consistency that you are aiming for. Bricks come in different sizes but for your first brick wall project, use the normal size bricks.Bricks are meant to be built as a veneer, which means that it should be constructed against another wall like in a house. You have to make sure that your foundation is strong enough to support the bricks. You also need to decide on the length of the brick wall that you are planning to construct.

Since the standard size of a brick is eight and a half inches long, place eight and three fourths intervals in the wall to give enough space for mortar mixture that will be spread in the joint of the bricks.

After you have placed the marks, you can now finish placing the 1st line of bricks. To accomplish this, you have to begin from left to right. Your left hand can pick up a brick from the stack and then your right hand can spread the mortar with the help of the trowel. Place an appropriate portion of mortar mix and set the brick in the mixture. Remove any residue after the brick is set in.

Repeat the whole process and continue placing down the brick until you achieve the height that you want. Remember to constantly check if the wall that you are making is level. If one portion appears disproportionate, place the bricks closer to the other side.

This simple brick wall building guide is helpful in your project but to learn more about the whole process, you can buy a DVD guide regarding the whole thing or enroll in courses that will teach you how to correctly construct a brick wall.

How to Take Your Brick and Mortar Business Online

MODULE 1

CHAPTER 10

1.0 HOW TO TAKE YOUR BRICK AND MORTAR BUSINESS ONLINE

2.0 INTRODUCTION

3.0 OBJECTIVES

MAIN CONTENT

3.1 The Future is Here

3.2 Approaches to eCommerce

3.3 Using Experts

3.4 The Process

3.5 Other Considerations

3.6 Do It Yourself (DIY) Plan

4.0 CONCLUSION

5.0 SUMMARY

6.0 ASSIGNMENT

  1. INTRODUCTION

This article is about how you can take your physical business online using Experts or how you can do so all by yourself.

  1. OBJECTIVES
  • To emphasize the urgency of setting up one's physical business on the Internet
  • To discuss ways a physical business can be set up online
  • To point out the easiest way to start as a beginner
  1. MAIN CONTENT

3.1 The Future is Here

Bill Gates once said that in the future there will be two classes of business – namely, those that are online and those that are no more existing. The current trends in business cycles are provoking this to be true with every passing day.

More businesses are going online and increasing their profitability while those that can not read this handwritings on the wall are losing customers, profits and depressed bottom-line, to them, on a very rapid rate.

So the next wise thing for any business owner to do is to think twice … on how to get his business online as soon as possible.

3.2 Approaches to eCommerce

There are 3 approaches to taking your current offline Business online namely:

a) You can set up a self-hosted website and sell your merchandise using phone, web chats (as in Yahoo / Facebook chats) or payment processor, all run by yourself.

b) You may otherwise want to use other companies to sell your products globally for you – you only source and supply the goods to them eg FBA that I will discuss below, or

c) You may wish to enrich your merchandise by just linking your own website to so many others and also helping them to sell their goods as affiliates while also making decisions for yourself. This is possible with eBay, Amazon and most sites selling similar product in your own market niche.

For most beginners, doing this by yourself is generally out of the way because of the vast technological background knowledge that may be needed to guarantee profitability.

Even though nowdays, software is impressively bridging the gap, and borrowing the ground to make ecommerce almost all-comers affairs, yet, it may be quite a breath-taking experience to cover the learning curve. I will also talk briefly on this again later.

3.3 Using Experts

There are so many companies who are more than willing to help you set up your business on the internet.

You can check on the following websites to find out things for yourself as their requirements are different: ecwid

– very good if you want to sell on multi-channel: Vend, eBay, Facebook, Amazon, Square, Instagram, etc.

rakuten

Jet

Etsy

AMZhelp

– they can do all the technical work for you on a fee.

soldsie

nordstrom

fiverr

you can also find gigs who can do it for you here.

3.4 The Process

In case you want to start with Amazon, the program for handling this is called Fulfilment By Amazon (FBA). You may wish to check their website for full and updated details.

But as is at Amazon, so also is the case in most of the websites, you need to do the following, preparatory to approaching them for this business:

a) Prepare a catalog database of all your products

b) Take and store cute multidimensional pictures of all your products

c) List your products on their website eg Amazon

d) List your product in many other marketplaces: eBay, rakuten, etsy, ecwid, jet, Newegg, Konga, Kaymu, DealDey, etc.

e) Integrate an inventory management system – this will enable you to traect your goods across the various sites so that you do not run out of stock. STITCH LABS is a very good place to do this.

f) Create your own hosted store. This is where you display photos of all your merchandise. Using Shopify is a very good idea.

g) Send your inventory to Amazon FBA storehouses.

h) Amazon usually have very strict specifications on packaging, labeling, etc. Companies like stitchlabs can help you with meeting Amazon standards.

You can also search this phrase in quote for more details: 'Labeling and Packaging Products for Amazon FBA – FBA Prep'

I) Barcoding: do not forget that each unit of product sold at Amazon and most online sites must have a barcode.

Bar code is a kind of universal product label like the one shown below that you see on every product sold in the global market:

This site will help you if you check on them:

http://www.computalabel.com/aboutupc.htm

j) Get someone to review your products on your site – this can cause your sales to shoot up.

3.5 Other Considerations

Traffic: consider using free traffic initially and paid traffic as soon as possible to bring eyesballs to your website. When using paid traffic, never forget to tract your conversions and measure profitability so that you will not burn out your budget too fast.

Tracking inventory levels across all channels: stitch labs can do this for you at a fee.

Integrate your offline and online store: this will increase your profitability and ensure that you do not lose your customers to others as they go shopping online.

You can simply do so by hanging the address of your website over the lintel of your brick-and-mortar business.

Analyzing your virtual store performance regularly:

Check your sales, conversion, non-performing goods, etc. so that you will not put too much of your working capital in non-performing inventories.

Do not forget to use social media, email marketing and text messages: these are very simple but highly profitable ways to market your business, use them on a regular basis basis.

If all these looks like too much work for you, then I will suggest you hand it all over to the geeks, any of the aforementioned companies can do a niece job for you at a fee.

3.6 Do It Yourself (DIY) Plan

Alternately, you can still go ahead and do it all by yourself, read through this guide for full details on how to do so, search 'profiles woothemes'.

Start from 'About' and learn all you need to run your website by yourself.

Although this may steepen your learning curve, but you can start there to learn the ropes.

  1. CONCLUSION

It is advisable to find ways to take your current physical business (if any) online if you want to remain profitable on a long-term. Doing so is very easy these days as highlighted in this discussion.

  1. SUMMARY

Your physical business can go online in 3 ways, those ways were the center-piece of our discussion in this ecourse.

  1. ASSIGNMENT

Go to Fiverr and post your job if you want to take your current physical business online. Gigs will respond and you start negotiation.

You can also use other websites like Rakuten, Etsy, etc., as listed above.