Solve the Freeze Problem of Outlook 2007 with OST To PST Converter

It is easy to access Outlook mail objects, such as e-mails, tasks, journals, attachments, appointments, and messages without Internet connection. The overall credit goes to the OST files. These files allow you to use mail objects without Internet connection. Using the OST file is the same as using MS-Office file. Whenever you connect with the Exchange server, all the data of the OST file gets automatically converted to PST. But sometimes, it happens you are unable to use mail objects because you fail to synchronize OST files with exchange server. So, there is a need to convert OST to PST file. For conversion, use a third party OST to PST converter tool.

Discussed below is an error that appears when you use Outlook 2007, Outlook application halts after some time and does not allow you to access Outlook application:

"Event Type: Information
Event Source: Outlook
Event Category: None
Event ID: 30 Date: 5/10/2008
Time: 8:33:44 AM
User: N / A
Computer: SBS-Computer
Description: The store C: Documents and Settings user.domain Local Settings Application Data Microsoft Outlook outlook.ost is being reconciled with the indexer for the following reason: Non-matching max change numbers. "

Causes:
The cause for the occurrence of the above error message is corruption or destruction of your OST file.

Solution:
Such errors can be resolved easily. First repair the corrupt OST file. For checking the OST file, execute OST Integrity Check tool. For executing this tool, follow the below steps:

– Close Outlook.
– Open Scanost.exe. This program is located at drive: Program Files Common Files System MSMAPI LocaleID folder.
– From the Name list of profile, select a profile that contains OST for checking.
– A dialog box will appear that requests you to Connect or Work offline, select Connect.
– Check the Repair Errors check box. If you uncheck the Repair Errors check box, then the tool does not make any change even if changes are required.
– After performing all the above steps steps, choose Begin Scan.

If you are not satisfied with the results of OST Integrity check tool, then use a third party OST to PST converter tool. OST to PST converter tools are read-only tools built with advance technology to securely convert OST to PST file. Built with simple graphical user interface, these tools are easy to understand.

Stellar Phoenix Convert OST PST tool easily converts OST to PST without changing the original structure of the OST file. The tool restores OST to PST onto any drive that can be found by the host operating system easily. The tool employs advance scan and normal scan – whichever is required – to recover OST content. It supports MS Outlook 2010, 2007, 2003, 2000, and 2002. You can download a demo version of the software to preview its functionality.

Know When Your Business Needs IT Consulting Services

Businesses must ensure that only the latest technologies and software are deployed at the workplace, in order to provide quality solutions to their clients, and to be ahead of the competition. With the ever-changing technological trends in the industry, businesses find it cumbersome to adopt these technologies. Instead they can hand the entire function over to a sound IT consulting services company – who in turn will tap into their global pool of highly skilled IT professionals, who have the advantage of working in various IT environments, and have extensive experience across sectors. By providing assistance to business, IT consulting services providers free up existing resources; ensure IT transfers are smooth and problem-free; optimize key business processes; identify areas that benefit with further cost saving; build competitive advantage through IT; reduce IT complexities; provide IT strategy consultancy services, IT project management services and provide specialized program management solutions – all of which, help the organization achieve significant business efficiencies and cost benefits.

Choosing to work with an IT firm definitely boosts a company's overall efficiency, which in turn decreases costs. Firms tend to look for a flexible and bespoke solution to address the client's IT needs, thereby delivering solutions that are in tandem with the client's goals.

The advantages listed above necessitate hiring an IT company. But how will a business know that it needs IT consultancy services?

A business may function with its existing IT architecture without knowing the benefits of such services. In order to discern the need for IT consulting services, businesses must first understand the details of their services. According to Wikipedia, 'IT consulting is a field that focuses on advising businesses on how best to use IT to meet their business objectives. In addition to providing advice, IT consultancies often estimate, manage, implement, deploy, and manage IT systems on businesses 'behalf, known as Outsourcing'. IT consulting services firms thatby help businesses strategize and evaluate their IT functions as a whole and take the necessary steps to implement and / or deploy and then administrator effective and robust IT systems in place. Businesses can seek the services of an IT firm when:

  1. IT investments regularly overshoot the set budget. Fast-paced technologies and trends warrant proper planning. When making strategic use of the allocated budget seems difficult, seeking the advice of IT consultancy services providers is imperative.
  2. A business decides to relocate or reduce staff.
  3. Projects regularly miss deadlines. Lack of specialists, complex projects and shoestring budgets lead to inefficient project management. A sound IT consulting services company designs bespoke, safe and cost-effective solutions, either full time or part time.
  4. Challenges of globalization, technical and regulatory changes arise. Business and technology management when integrated help the business survive, and therefore IT strategy consultancy is important.
  5. Programs and projects eat into the budget. A business needs specialized program management solutions to achieve significant cost savings. A robust IT services company provides either the co -ourcing or the outsourcing model to help businesses remain ahead of the competition, by providing tailored solutions.
  6. There is a need to change networks or when the need to shift to a new IT architecture arises.
  7. The company is in need of a robust disaster recovery plan.
  8. There are no data storage systems in place.

Availing the services of the right IT consulting services company may be a challenge. A business must choose a provider before the problems stated above get worse – and must choose a provider who is able to set in place a sound IT system in place. Therefore, a business must choose a provider who provides flexible solutions. Businesses must also remember that although they think they are able to fix small issues, the reality is that these issues must be valued at the root, and they can be properly tackled only with strategic IT solutions – only provided by an effective IT consulting services company .

Do You Understand How a GMIB Works?

Is it a big surprise to me that the average investor does not understand how their variable annuity benefits work? No, I wish it was. It is for this reason I launched annuityiq.com. The fact that few people actually understand their variable annuity benefits is absolutely believable.

These benefits are sold as a, "do not worry if it does not work out you will at least get your 5 to 7% rate of return." The rate of return with a GMIB, guaranteed minimum income benefit, builds totally separate from your actual account value. Your investments will fluctuate and be completely dependent upon the sub-accounts performance. A sub-account is the insurance companies name for a mutual fund, but they can not call a sub-account a mutual fund.

The GMIB will grow in a separate phantom bucket called your "benefit base". Your initial benefit base is simply the amount of your initial investment, also known as your purchase premium. The base benefit is what the 5 to 7% will compound on. You have to understand that this is and has no relation to your cash value or market value of your contract.

A GMIB will have a holding period attached to it. The holding period is the minimum number of years that you have to hold the contract before you can exercise the benefit. This waiting period can vary from 7 years to 10 years depending on the insurance issuer's terms. When you exercise the benefit you are annuitizing it and will receive a lifetime of income.

The annuitization tables that are used are based on very conservative assumptions. The insurance company usually guarantees you a minimum interest rate, about 2%, and fall outside of traditional annuitization tables. The company may roll back your age to calculate your annuity payments. This age rollback is not good for you. The company will generally roll your age back anywhere from 8 to 10 years. This means that if you exercise this benefit when you are 75, the company will base your payments as if you were 65 years old.

The end result is you receive lower annuity payments. Also the only way to take these annuized payments is period certain with life. Lifetime payments are lower than period certain payments. Period certain payments range from 5 years to 20 years and are geared to pay you all of your interest and principal back over whatever time frame you had chosen. For example if you chose a 10 year period certain then at the end of 10 years you will not receive any payments. The life with period certain is basically a life time benefit and if you die prior to the period certain time then a beneficiary will receive some payments until that period certain is up.

With living benefits, specifically GMIB's, you have two flavors to choose from.

1. Dollar-for-dollar

2. Proportionate

The difference between the two is major. Dollar-for-dollar will allow you to withdrawal up to the GMIB interest rate amount without impacting your base benefit.

For example:

A $ 100,000 investment with a GMIB of 5%, which is dollar-for-dollar; you could withdraw that 5% without decreasing your benefit base of $ 100,000. You could, if your investments did not perform, annuitize the original $ 100,000 after 10 years, even if your account's cash value is almost depleted. This benefit is good during a declining market.

Proportionate withdrawals will reduce your base benefit by the same percentage as the withdrawal. So you could not take out that 5% compounding without reducing your base benefit. The only time you could take income out is the market, or your investments, did well. This is because you are taking the 5% out of your earnings and therefore you will not affect your base benefit. The only time this benefit is good is when the market, or your investments, go up in value.

I know it is terribly complex to understand exactly how these benefits work. The good news is most of the GMIB's are dollar-for-dollar now, there are only a few that are proportionate. You have to read either the prospectus or the contract to find out if the GMIB is dollar-for-dollar or proportionate. You also need to realize that even if your contract is dollar-for-dollar any withdrawal over the GMIB interest rate will be proportionate and will affect your base benefit.

The question is now why would anyone want a GMIB? I can easily answer that question. People want peace of mind and the comfort so even if everything went wrong I still have this to rely upon. I do think that people do not understand how these benefits work and have bought them under a misunderstanding of information. These benefits can be so difficult to explain that some people summarize it way too much and that leads to the misunderstanding.

I, personally, feel that these GMIB's are old news. I do not, nor have I ever, fully liked them. Like I said before they are difficult to understand and can lead to problems later in life. I also do not like the idea that you have to annuitize to realize the benefit. With the advent of For-life benefits why would anyone want a product that is so restrictive? I do not believe they are anymore.

I view the folks who sole sell GMIB benefits as the last horse and buggy salesmen. They either do not like the For-Life benefits or are hung up on being able to offer "6%" GMIB's. Most For-Life benefits are 5% and are there less less attractive compared to offering 6% or even 7% in some cases.

The bottom line is this; For-Life is the way to go. You have flexibility, the potential for higher income if your investments do well, no annuitization and your money is guaranteed for life. Compared to a GMIB which may be capped as it reaches certain compounding thresholds, you have to annuitize it to realize the benefit, you have to wait ten years to exercise the benefit and you have to be careful about how much money you take out of your investment.

There are too many caveats to GMIB's and not enough reward. A For-Life benefit gives you everything you could ask for out of a variable annuity. The question is how are you going to find the best For-Life benefit? I did the research for you, use it, get "The Annuity Report" at http://www.annuityiq.com .

What Is a Retractable Seating System?

The use of a retractable seating system has become commonplace in areas where space is at a premium.

Retractable seating is composed of multi-tiered platforms and it uses limited space for multipurpose usage. The retractable seating demonstrates a maximum seating capacity in a limited area when fully extended. One can also make use of the free space in various usages when it is fully retracted.

There are several different options which are commonly used and they all have their own unique benefits. The key to choosing a retractable seating system that best matches the intended use is by understanding what each option has to offer. When digging deeper into the details, there are a number of differences that can be spotted, however they all rely on the same basic principles.

In general, most of these seating alternatives will rely on either bench or chair seating. Depending on where you search, a retractable seating system will also be referred to as a telescopic seating system. They tend to feature multi-tiered platforms to ensure that anyone sitting in the seats will have a good view of whatever is going on.

Additionally, the seating may be operated manually or automatically depending on the size of seating.

In most cases, retracting the seats can be done on a row by row basis which makes it easy to seat a large crowd or only a few rows. This can be an incredibly important feature if you need additional floor space and do not require all of the seating.

A seating system that utilizes bleachers is most often best suited in situations where designated seating is not needed. As an added bonus, bleachers will often allow you to seat more people than when individual chairs are used. Bleachers also tend to be easier to clean which is helpful if they will be reused multiple times within a short time period.

On the other hand, a retractable seating system with chairs also has its advantages. Chairs, even plastic ones, tend to be more comfortable than bleachers. Not only the seat itself, but also the additional back support is provided. This is helpful when people will be listed for extended periods of time without doing a lot of moving, such as during speeches and lectures.

If the situation arises where the retractable seating system will not provide enough seats, then using supplementary seating or mobile seating is normally a good solution. It does not matter whether you choose to use bleachers or individual chairs, the primary benefit of a retractable seating system remains the same. It allows you to provide as much seating as necessary while still allowing you to as much free floor space as possible. This is particularly useful in multi-purpose areas such as gymnasiums and arenas.

Basketball Shoes

Playing basketball requires compelling moves like running, jumping, side-to-side movements, blocking, and shooting. This involves a lot of wear and tear on shoes. In order to reduce wear and tear, basketball players need specially developed shoes, like basketball shoes.

Basketball shoes help in preventing lower body injuries by allowing the players to move quickly and by helping to transfer body weight. At the competitive, level you have to choose proper shoes.

Different players require different types of basketball shoes. Some players, especially power players, need shoes with high tops with maximum ankle support and comfort. Some others, like all-around players, need mid-sole shoes. Speedsters need lightweight, low-top shoes with no restriction of the ankles. Many players use tennis shoes for playing basketball, but there are risks in wearing these shoes, like the increased chance of sliding, becoming injured, and slowing down by weak grip.

Basketball shoes are made up of leather, synthetic leather, or canvas. The most frequently used material is synthetic leather, which is more durable and lightweight than natural leather. Some use only natural leather but these shoes have a tension to stretch. Many basketball shoes have combinations of synthetic leather and natural leather or textile.

Team shoes feature a highly durable sock liner. Today, there are different styles of basketball shoes on the market. When buying a basketball shoe, the most important things to be noted are durability, support, traction, comfort, and style. There are different shoes for men and women.

Basketball shoes are more advanced than running shoes. When playing on a hardwood floor, you need shoes that provide good traction, both for forefoot and heel. The basketball shoe size must be suitable for the toes, arch, and heel. Many of these shoes have pillow-like landing pads with elastic quality. Many have heel plates for increased support. Basketball shoes are available in different colors or as team colors, and the pricing changes accordingly. These shoes can be purchased directly or online. The price of leather shoes ranges from $ 35 to $ 190 for a pair, but canvas shoes are available from as low as $ 17.

Vertical Jump Test

An athlete's vertical jump is a stone in his sports career; in sports like basketball and volleyball, the player with the highest jump is the most scared score winner and defender of all. For Generations, people have been trying to figure out ways of enhancing the explosive power of a person's vertical jump. Aside from the great bout on unlocking the limits, it has also been a problem measuring the accurate progress of a person's vertical jump during his training.

Wall Nut
The most basic way of measuring the height of a person's vertical leap is by standing within a wall while raising one of your hands as high as possible, feet lying flat on the ground; afterwards, put a line or marker on the tip of your finger . This is known as the "standing reach". Put oil or powder at the tip of your fingers then jump several times and touch the wall so marks would be left behind to indicate your highest reach upon jumping. Measure the distance between your standing reach and the highest point you have made. This is the height of your vertical jump.

Kinematics
Some people use a more scientific and accurate way of measuring the vertical jump, by using a pressure pad, laser beams and kinematic equations. This is measured by taking note of the time an athlete can complete a jump before he falls back to the ground. The equation for this is h = g * t2 / 8, where (h) is for height, (g) is for the pull of gravity which is equal to 9.81 m / s2 or 32.2 ft / s2 and (t2 / 8) for the time an athlete can complete the jump from the ground and back to the ground in milliseconds. This equation if usually calculated by a software installed to a computer where the pressure pad and laser beams are connected.

Infrared Laser
This is also an accurate way of measuring the vertical leap of a player, where it is required to stand and jump in between two infrared laser planes facing each other. How does it work? Well, not as complicated as computing kinematic equations; in fact, it just works like jumping next a wall and subtracting your standing reach off your maximum jump reach. The only difference is that first, it is using infrared laser beams and second, it is a way lot more expensive than the regular jump and reach beside the wall.

Whatever method it is you are using, as long as you are sure that your vertical is gaining more and more power and you can feel that there really is progress in what you are doing, you are certainly getting somewhere. Question is, are you? If you are not pretty sure that there is ascension in your vertical jump training, I would advise you to seek help from vertical jump professionals.

Core Star Meditation

With due respect to reiki and pranic grand master. Virendra Thakkar, I am presenting a very powerful core self-empowerment technique known as Core Star mediation.

Hara alignment

  1. Be aware of the Tan-Tien 1 and inch inch below the belly button on the middle of the body. Feel the power and heat there.Feel the heat as in the molten core of the earth stay focused there until it is very hot. Take very slow and deep 10 breaths by counting 10 to 1, while constantly visualizing the Tan-Tien point.
  2. Be aware of the Soul- seat in the chest 2 and inch inch below the hollow in your throat. It is not the heart chakra. It is like diffused light around a candle. Soul's linging and the song of the Soul, resides here. When you connect with it, it feels like a bulb being blown up inside your chest. It has spherical appearance. Take another set of 10 breaths, counting 10 to 1, while visualizing the Soul -seat.
  3. Feel the laser line going from the Soul-seat down through the Tan-Tien in the pelvis and into the center of the Earth. Take 10 deep breaths, while focusing on the core of the earth.
  4. Focus on the Laser line going through the Soul seat — Tan Tien — pelvis — center of the Earth. Feel the strength and silence in the room.
  5. Be aware of the ID point, 2 and to to 3 feet above your head, inch inch in diameter. While visualizing the ball, keep your spell straight, you may hear a high-pitched sound, if your auditory perception is open this is like God-Head ID point. Take 10 deep breaths, while focusing on ID point. Feel that tiny laser beam [half the size of your little finger] going to the molten core of the earth through the Soul-seat and the Tan Tien.
  6. Feel the power. This is alignment. This is bridge between heaven and earth.

Light Emerging From the Core Star

  1. Be aware of the Core-star 1and1 / 2 inch above the belly-button. There is the essence of your

– Who you are beyond time, space, longing and desires.

– At this place there is no need, no pain, no desire, you are simply a creator.

The creative force moves from the core-star through the ID point Soul-seat and Tan-Tien on the haric level.

Allow the light within your Core star to emerge within every cell of your body, bringing the members of your body together within the light of your body. That light is the light of your core star the God within.

Do this where there is

– Pain or illness.

– Anger or fear.

– Suspicion or greed.

-forgetting

Allow that essence to flow through each layer of the auric field.

GEETA JHA [SPIRITUAL HEALER]

INDIA

Scrap Copper: 5 Best Places To Find Scrap Copper

Copper is in a lot of places you might have never suspected. It is one of the most valuable scrap metals on the market. This can be a very lucrative business for the right person. It is also a way to make a little cash while also helping to cut down on environmental waste. You can find copper hidden in a variety of places. Most often though it is in full view, found in things that you never would have imagined. Knowing where to look will help you in your recovery efforts. Below you will find five of the best places to look for scrap copper.

1. In household fittings. This is especially true of older homes. Pipes and other types of plumbing will have copper in them. Be warned however it is illegal to take the copper from a house you do not own. You can safely get them from demolition sites and if someone is remodeling and have thrown them out.

2. Appliances used to have a lot of copper. Not so much now but there is still quite a bit in them. The older the appliance the more copper is in them. Washing machines, old refrigerators, dryers, microwaves all have copper coils and wires. With air conditioners and refrigerators it is dangerous to remove the copper unless you know how to avoid releasing the toxic gasses that are used in them.

3. If you find a house that is being demolished you can get the wiring. Once striped of the insulation it will yield quite a bit of copper. Although most electricians may have beaten you to it. They are in a unique position to get at the copper first. Still a lot of it gets thrown out so check remodeling and demo sites regularly.

4. Finding old copper statues and other household items like decorations can also be a good source for copper reclamation. Things like teakettles, pots, spigots and even beverage dispensers can yield enough copper to make it worth your while. One great place to find things like this is yard sales and thrift stores. You can buy them for a really cheap price most often less than they will be worth at a recycling shop.

5. Cars are also a great place to look for scrape metal of all types. If you take apart an engine you will find a lot of copper has been used in there. The radiator coils and heating cores are also a good source of copper. You can get trace amounts of the stuff from the onboard computers as well.

You see it is all in what you know. Like did you know that not only could you find copper in pc’s but also gold. And that is a great haul seeing as how much it is going per ounce. But that is a topic for another article.

Logo Design – Your Objectives In Designing A Logo

If you really want to have some clues on how to design a good and simple logo, then you have come to the right place. Here, I am going to show you a little bit about logo creation in general. First, I would like to show you few basic histories about logo creation. Then we’re going to observe further onto the typical examples of a good logo design to study them and recognize their basic traits. Finally, we are going to wrap up the article by discussing about the objectives of a logo design creation. This article is meant to give you some understanding about the history of logo design creation and introduce you to several good examples of them, so you will have a clue on how to create one.

Let’s first look at the history, so you will have an idea or two about where and when it’s exactly originated. Logo design actually originated from the ancient and prehistoric drawings or paintings which can usually be found on rock walls. Those were not an actual logo but merely as a picture or a symbol that can be interpreted as a one of the most primitive communication system. Some of the most well-known ancient civilization such as Egyptian, Babylonian, Aztec and Mayan used different pictograph to write on their walls. Pictographs are a mere graphic symbol that convey a meaning which recognizable. So the similarities between these old symbols and the modern logo design that we all know lies in the picture that can represents a meaning and functions as a basic communication tool.

Now, let’s see the typical example of a good logo design. You can study these examples and use it a source to get an inspiration that compels you to design a unique logo that will suit your business. McDonalds’ large ‘M’ letter logo is a good example, Walmart with a star symbol between its syllables is also a good one and Burger King’s logo should be the first thing that pops up in your head when you hear the word ‘burger’. All of the examples above have basic characteristics of a good logo design which are unique, simple and easy to remember. You should strive to implement all these basic characteristics whenever you want to design a logo. It will not be an easy task to achieve. But in the end it will reward you nicely because this logo will be your identity to the world.

Finally, you should know and understand the objectives of a logo design creation. This is important because it will help you to establish your business identity to the world. The primary objective is it should be able to affect the subconscious mind of people so you may want to make it as simple and unique as possible which will then make it easier for people to remember and recognize it. An attractive logo design is the secondary objective, the more attractive your logo is the more people wants to see what’s it all about and end up buying your product just to try it out. Once they are satisfied with your product, they will likely becoming recurring customers. Given enough time, this will create a positive reflection of your business and people will have no trouble to associate your company logo to a specific type of product that you sell. If you keep your business to grow like this, sooner or later your logo design will become worldwide brand recognition.

Use Cornstarch For Skin Rash

There are various skin infections that affect a lot of people these days. Plenty of athletes suffer from jock itch and athlete’s foot. Some women have feminine itch. A lot of children have skin allergies too. The increasing numbers of skin related infections shows that you need to know the best method to cure or relieve it. These skin irritations will surely cause a lot of discomfort. Rashes may occur on various parts of the body like in your palm, groin, neck, thighs and feet. One thing that you need to do is to keep the affected areas dry all the time. The microorganisms that cause these skin infections like to be in wet and warm places. Powder is commonly used. You have to know that you can also use a simple household item like cornstarch for the skin rashes that you have.

WASH THE RASHES FIRST

The first thing that you need to do if you have rashes is to clean these rashes first. Use soap and clean water. Some rashes are caused by chemicals. Soap will help remove these harmful chemicals from your skin. After washing the rashes, you need to pat the affected areas to dry them up easily.

SPRINKLE

You have to dry up the affected areas immediately after washing. Use clean towel or blower. After doing this, you need to sprinkle the cornstarch over the rashes. It will help in keeping the rashes moisture free. It can absorb the excessive moisture in your skin. This will ensure that the growth of the microorganisms will not be fast.

You have to cover the affected areas with clean cotton cloth after applying the cornstarch. You have to do this so that cornstarch will have enough time to draw out the moisture from your skin before being shed off due to friction with your clothes. Try to do this for at least twice a day to ensure that it is going to take effect sooner.

IMPORTANT REMINDER

You have to observe the condition of the rashes after a few days of using cornstarch. You need to assess whether the condition has become better or worse. It is very important for you to remember that yeast infections will not respond well with cornstarch. It can even make things worse. Therefore, you have to make sure that it is not yeast infection so that you can continue with the treatment. Do not apply cornstarch if it is a yeast infection. It will just feed the yeast to grow further.

You have to visit your physician if some unusual signs and symptoms appear. If there are skin irritations or rashes on various parts of the body, it might be due to some serious conditions. See your doctor if you see too much blisters, bleeding or pus on the affected parts.

Cornstarch can help you get rid of skin rashes or irritations. These rashes must be kept clean and dry all the time. This will ensure that rashes will be healed immediately. The tips will guide you in using cornstarch correctly to cure skin rashes.

Astral Projection Spy – The Amazing Truth Revealed

One of the most interesting components of the research done into the out body body experience was the US military study into using astral projection as a spying technique on foreign countries and other miscellaneous enemies. As far fetched as it sounds, the CIA conducted an experiment in remote viewing, or "seeing at a distance" that employed a series of highly regarded psychic spies, as well as ordinary military intelligence as a way to peek both at the possibilities of using ESP in warfare, as well as of course, seeing what the other guys were REALLY doing over "there" …

After about a decade or so, the "official" lab was closed, and it's results were released to congressional oversight and review. The operation was called "Star-gate" and any simple search engine query will offer eons of reading on the incredible results turned in by some of the highly trained psychic spies employed to peek behind enemy lines … while they're bodies were many thousands of miles away!

The most famous of these paranormal guinea pigs is Indigo Swann, whose accuracy in remote viewing is unexplainable by any current known scientific standard or process. His ability to see, via powers we do not yet understand, people, places and things in geographical locales many miles, and even countries away, is simply jaw dropping. Several other participants of project Star-gate have gone on to very celebrated careers as authors and speakers on Astral Projection, psychic ability and one or two actively teach the skill to others in workshops around the world. A bestselling book also emanated from the same group, "Psychic Spies", which highlights the experiences of one of the remote viewers during these experiments – his claim of developing psychic powers after being shot in the head during the Vietnam war was bolstered after considering after showing off these skills for an incredulous military audience.

Overall, like much in this venue, it's simply amazing, phenomenal and exciting stuff that would make any hardcore "X-files" devote green with envy .. 🙂

Types of Hair – Asian Hair

No two persons have the exact hair. The same way different races have different skin color, it's the same way different ethnic groups have different types of tresses. There are three main types depending on ethnic group – Asian, Afro-Caribbean and Caucasian – all types having their own unique attributes. No matter how different the types are, they comprised of the same parts. These are the cuticle, cortex, medulla and a very important protein called keratin which is the chief part of all. What determines the shape of your tresses is the shape of each follicle. Asian hair grows from round follicles giving it a bone straight appearance. It has very thick cuticles made up of approximately ten layers while other types have around five.

Asian hair type is the most dominant in the entire universe. It usually has smaller thickness than the other types but it grows faster than the rest by far relating to swiftness of growth. The quantity of hair on the head in Asians is small but because of the thickness it appears to be full. It has been found that this type reacts more quickly to care products, specifically, hair loss products. It is considered that this has to do with the natural speed of growth that this type has. It is also stronger than other types and more able to recuperate from damages and it also has the longest cycle of growth which lasts up to nine years. Earlierly, this type was the least suspect but butly Asians have been adopting the practices of the western world. These habits can result in very thin hair as it is not very crowded.

Each type calls for different care procedures and products to fulfill the requirements of that special type. Asian hair absorbs moisture very fast and keeps that moisture. In spite of this, it may undergo extra dryness. This is because it promises to be very long and as a result moisture is lost along the long shaft. Hair loss in Asians is little since few hairs are lost daily. Balding is also a rare occurrence in Asians. This type is generally shiny because of the presence of a medulla containing dark pigment which explains the shininess and high moisture. Asians usually have oily scalp which demands their mane to be washed frequently to avoid a dirty look.

Because Asian hair is long, straight, strong and typically free from chemical impairment it is the ideal type to utilize for extensions. As a result, persons turn to Asian countries for human tresses to be used in wig making and extensions.

This type requires the use of products that are appropriate for that specific kind. Shampoos that have a pH of 5 to 5.5 are ideal; anything over that pH would be too harsh. Individuals of Asian lineage must avoid using products like mineral oil.

Asian styles are usually different. They usually look sleek, smooth and silky. They are also generally extremely straight and flowing. Stylists agree that it is harder to curl and color when compared to other types. Digital hot perm machines are helpful in styling because they can be set to provide the appropriate heat and chemical solution for any type. Asian hair is dark and there before adding highlights to it can really highlight the appearance of the tresses. Double-sided coloring is a great way to augment this type. The underside is colored in a dark brown shade and a lighter shade is dyed on top. This gives a shimmering effect when the hair rub against each other.

Save For A Home – Vintage Collectible House Banks

I wanted a house for so many years before I could afford one it’s no surprise that I began to collect small, affordable houses. Vintage banks shaped like houses that is.

One year, at an antiques show in Boston, I found a small house-shaped bank marked “Save For A Home.” Since that’s precisely what I was doing it was a must have. Several months later I found another vintage house bank at a garage sale marked “Save For A Purpose.” Voila! A collection in the making.

Trouble was, it turned out to be a fluke that those two vintage collectibles had turned up so easily. For the life of me I couldn’t find another. Obsession set in. Every time I cruised the aisles in an antique shop I was really looking for just one thing. Soon half a dozen of my friends and family were enlisted in the search. My collection grew at the rate of about one house bank per year — with a lot of hunting in between each discovery.

And then they created eBay. My collection doubled in size within three weeks and the obsession was lifted.

The focus of my obsession is small — about 3.5″ wide and 2.5″ high at the peak of the roof. These banks were give-aways — usually by banks or credit unions, sometimes by insurance companies. They are made of an early plastic with a metal bottom that is opened with a key. If you’re lucky the key will still accompany the bank. There’s a metal plate affixed across the front of the base that reads “Save For A Home,” “Save For A Purpose,” or “Save And Have” and a metal plate on the other side that has the bank or company’s name and address. The body is off-white and the color of the metal plate matches the color of the roof — red, green, or blue. Earlier versions were made of cast iron or tin.

Shaped like a quintessential Cape Cod style house the banks are charming and remarkably detailed. The Cape is complete with dormer windows, shutters with cut-outs, and a fanlight over the door. There are miniature details like a door knocker and a pair of lantern-style lights that flank the door.

The best way to track down house banks is to search on eBay. Do a search that includes the item description field for the term “save for a home” in quotations and you’ll find them.

My grandfather built a Cape in the 1960s financing the construction in large part with the coins he’d been collecting. It’s probably no longer feasible to finance a home purchase with change but I still think these house banks are a great inspiration for somebody who’s trying to amass a down payment or who’s dreaming of their first home. “Save and Have” is certainly a better plan than “Borrow and Spend.”

As for me I just like houses – in any size – so my vintage house bank collection lines a shelf above my desk

Fractionated Coconut Oil – A Carrier Oil For Skin Care

Fractionated Coconut (Cocos nucifera) oil is a very popular oil suitable for massage therapist, aromatherapists, and manufacturers for skin care products. It is the preferred oil for high quality cold process soap making. Coconut oil is expressed under high pressure from the coconut kernel, and then filtered. It is actually solid at room temperature but melts easily at body temperature. It may cause skin sensitivity in people who have nut allergies. This article discusses its healing properties for skin care.

Coconut oil is an ingredient in many cosmetic products, especially suntan lotion, shaving creams, soaps, and some shampoos, because it lathers well and is a good conditioner for scalps.

Refined coconut oil is very close, in substance, to human subcutaneous tissue and is thus more compatible with skin than other vegetable oils. Massage therapists and aromatherapists note that it does not clog pores, making it an ideal carrier oil for troubled skin or oily skin.

What in the world does " fractionated " mean, anyway? This process removes some of the saturated fatty acids from the oil by heat, to make it softer and more liquid, while also taming it's overwhelming natural odor. (This is not hydrogenation, which actually forces hydrogen into oils making them more solid). Some naturalists question if fractionated oils should be used since it is not a "whole product". Most aromatherapist prefer natural oils. This is certainly true for essential oils. However, many find that fractionated coconut oil has proved very satisfactory as a carrier, and prefer it to the unrefined oil, which tend to go rancid more quickly.

Coconut oil is an edible oil that has been consumed in tropical places for thousands of years and was prevalent in the United States as a favorite in the baking industry. However the campaign against saturated fats led to many manufacturers abandoning coconut oil.

Coconut oil is perfect for moisturizing both hands and body. It is light and easily absorbed into the skin, leaving it satin smooth. It can also be used as an intensive treatment to moisturize and condition brittle, dull or dry hair. It is great to use in or after a bath or shower for moisturizing the skin. It is a wonderful oil to use after sunning. It is excellent for scalp treatments. Massage it into the scalp and leave it on as long as possible. Some use it as a replacement for their conditioner. It can also be used for dryness, itching, and for sensitive skin.

If stored properly (cool environment out of direct light) its shelf life is very long. Its light texture makes it a good oil to use when heavier oils seem too sticky on the skin. It will also easily wash out of sheets and towels, making it a favorite of massage therapists. It may cause sensitivity in individuals who have nut allergies.

Cobra Golf SL Putters

Cobra Golf is predominantly known for its drivers and wood clubs, but they have an innovative line of putters as well. The line is not extensive and does not include classic putter styles, but the basics of high MOI (moment of inertia), and a CG (center of gravity) that is low and well back of the putter face are clearly major design goals. This high MOI produces forgiveness on putts not hit exactly on the sweet spot, and the low and back CG means that the ball will skid less and get rolling quicker. There are three basic putter head designs in the Cobra SL Series, and these come in several varieties, including putters with heel and center shaft attachments, ladies models, and putters for left handed golfers as well.

There are a number of common threads in the Cobra SL series of putters. All are mallet style designs with a forged steel weight bar that runs completely around the back of the putters. This is primarily how the high MOI is achieved. Weight has also been removed from the tops of the clubs and a light weight urethane material is used there. This urethane substance has the added effect of dampening some vibrations and giving the golfer a more sensitive feel at impact. The putter faces are all made of aluminum, and the face contains a milled face pattern which, along with the CG that is low and back, causes the ball to skid less and get rolling faster along its intended line. The alignment aids are very prominent on all the models, and a yellow dashed sight line, called a fiber optic sight line, is used each of the clubs as well.

The Optica SL-01 model has a traditional mallet putter look, but this is elongated by the weight bar which runs completely around the back and is some distance away. A rather thin solid bar runs from the back of the putter face, through the mallet section and connects to the metal weight bar. On top of this is the yellow dashed fiber optic sight line. There is also a channel on the top of the putter which is about an inch or more in width, and this is also part of the alignment system. The SL-01 is a heel shafted putter, whereas the SL-02 is exactly the same as the SL-01 but is a center shafted club.

The Optica SL-03 has all of the same basic technology features and materials described above but has a different head shape. Still a mallet looking putter because of the weight bar running around the entire back of the putter head, the SL-03 has a modified trapezoid shape behind the putter face. The diagonal lines of the trapezoid curve inward in an arc, and so there is empty space between there and the metal weight bar. The alignment aid is again very prominent and is about as wide as the diameter of a golf ball, and it includes two of the yellow dashed alignment lines. The SL-04 has the same exact design as the SL-03, but the latter is a heel shafted putter whereas the SL-04 is a center shafted club.

The Optica SL-05 is once again a mallet style putter formed by the semicircular weight bar around the back. The putter face and the weight bar are connected by a straight bar of material that is about an inch or more in width. This bar also serves as part of the alignment system, and on top of it are 3 yellow dashed sight lines. As with the other odd numbered models, the SL-05 is a heel shafted putter, and the SL-06 in turn is the same design except it is a center shafted club.

There are ladies models for the SL-01 and SL-03, and all the models come in both right and left handed versions. There are some choices in putter length which can be either 33, 34, or 35 inches, although all three lengths are not available for every model. For example, for lefties, only the 35 inch length is available on both the SL-01 and SL-03 models.

The Cobra Golf SL Putters are attractive and modern looking, and they appear to be well designed for functionality as well. Several PGA Tour players use these putters, so you know they perform well or the pros would use something else, as there are hundreds of models to choose from, and these players can use any clubs they like.