Bearpaw Boots – An Affordable Alternative to Uggs and Emus

For some time now women have been purchase Uggs and Emu boots, not only do they look stylish but they are comfortable as well. However, there are a new range of sheepskin boots available which look just as great and which are more affordable than the ranges offered by Uggs Australia and Emu Australia. The boots that we are in fact talking about are the ones known as Bearpaw boots.

If you were to go to sites such as Amazon you would soon discover that the boots that this company make are some of the most popular selling ones. Of all the styles that Bearpaw has produced the ranges which are proving most popular of all are the styles known as T410 and M410. Each pair has a suede outer lining and inside they are lined with soft sheepskin.

The natural lining in these boots as with those made by Uggs and Emu help to keep your body temperature at a constant level. Plus these boots enable moisture to escape so no matter how long you wear them for your feet remain dry, warm and cozy.

There is one difference however between these styles of boots and those made by Uggs and Emu including styles such as the Emu Bronte or Ugg Classic Crochet Tall. The boots that Bearpaw have made come with a thermo plastic rubber sole and again this helps to ensure that whilst being worn your feet remain cozy and warm inside them.

As with any style of sheepskin boots you can purchase today these ones are so comfortable that many women choose to wear them without putting socks on first. But not only have Bearpaw created a wonderful array of boots for women to wear they also have plenty of wonderful styles for children and men. However, now we will take a closer look at the two styles that seem to be proving the most popular.

1. Bearpaw Model T410 – This style of boot has an outer suede covering and the height of the boot from the arch is 12 inches. Most women tend to wear these boots with a great pair of jeans or a casual skirt and although some prefer to wear them at their full height. Other women tend to fold the top of the boots over in order to expose some of the boots best feature its sheepskin lining.

These boots are perfect for wearing in cold weather (although not wet or snowy conditions) as the rubber soles on them provide ample grip as you walk along. As well as being comfortable these boots come in a number of different colors including sand, chocolate, chestnut, and nutmeg and of course black.

2. Bearpaw Model M410 – Again this style of sheepskin boots has a suede outer lining, but the length of these is slightly less than the T410 version. In fact the height of this particular boot is only 10 inches in length from the arch of it. As with the other style we discuss in this article these look great worn with jeans or even a long denim skirt of Boho skirt.

Again these boots come with the rubber soles so that the offer you plenty of traction when you wear them and even in cold weather, although not wet or snowy they are suitable. What makes these particular boots stand out from the ones we have mentioned as well as the similar styles created by Uggs and Emu is you have more choice of colors. Along with the neutral colors like sand, black, chestnut and chocolate this range comes in Light Pink and Navy.

If you do purchase a pair of Bearpaw boots then before you wear them for the first time it is a good idea to use a good quality suede protector on them. There are plenty of different ones now available and using this will help to main the look and feel of your Bearpaw boots.

Depreciation, Causes of Depreciation, Need for Provision of Depreciation

Life span of an asset to a business rests primarily, on the purpose of its acquisition and secondary, on its nature. An item acquired for immediate consumption or sale is a short-lived asset and that meant for prolonged use, is long lived asset, though both produce revenues. Whereas the former asset expires within one year of its acquisition, the latter asset lasts longer. Hence almost entire expenditure on a short lived asset becomes an expense and is matched against current year’s revenue.

But the position is otherwise with a long-lived asset which wears out or depreciates over a long period. Accordingly, the outlay of a fixed asset is spread over several years and annually only a fraction thereof expires. Simply, this fraction, called expired cost or depreciation, is charged against current revenues and the rest, termed un expired cost, is carried forward for future expiration.

“Depreciation may be defined as the permanent decrease in the value of an asset due to use and/or the lapse of the time.” -Terminology of Institute of Cost and Management Accountants, England

“Depreciation is the permanent and continuous diminution in the quality, quantity or value of an asset.” -Pickles

“Depreciation may be defined as measure of the exhaustion of effective life of an asset from any cause during a given period.” -Spicer and Pegler

“Depreciation is’ the gradual and permanent decrease in the value of an asset from any cause.”-Carter

Objects of making provision for depreciation

For attaining following objects, depreciation accounting is a must for every business:

(1) Recovery of cost incurred on fixed assets over their useful life so as to keep owner’s capital intact;

(2) Provision is for replacement cost on the retirement of original assets ;

(3) to include the depreciation in the cost of production to find out the correct cost of production;

(4) to find out correct profit for the year ;

(5) to find out the correct financial position through balance sheet.

Causes of Depreciation

Depreciation may be of two types :-

(1) Internal-Depreciation which occurs for certain inherent normal causes is known as internal depreciation. The causes of internal depreciation are :

(1.1) Wear and Tear-An asset declines on account of continued use e.g. building, plant,

machinery etc. such decline depends upon quantum of use of an asset. If a factory works double-shift instead of single shift, depreciation on plant and machinery will be doubled. It is obvious that such loss is unavoidable. An asset may be kept in proper working conditions

through repairs for the time being, but it can not be done so permanently: At one time the asset will become unfit for repairs, when it will no longer be suitable.

(1.2) Depletion-Some assets decline in value proportionate to the quantum of production, e.g. mines, quarry etc. With the raising of coal etc. from coal mine, the total deposit reduces gradually and after some time it will be fully exhausted. Then its value will be nil.

(2) External-Depreciation caused by some external reasons is called external

depreciation.

The causes of external depreciation are:

(2.1) Obsolescence

Some assets, though in proper working order, may become obsolete. For example old machine becomes obsolete with the invention of more economical and sophisticated machine, whose productive capacity is generally higher and cost of production is lesser. In order to survive in the competitive market the manufacturer must install new machine replacing the old one.

(2.2) Passage of time

Some assets diminish in value on account of sheer passage of time, even though they are not used e.g. lease hold property, patent rights, copy rights etc.

(2.3) Accidents

Assets may be destroyed by abnormal reasons such as fire, earth quake, flood etc. In such a case the destroyed asset may be written-off as loss and a new one purchased.

Need for Provision of Depreciation

The need for provision for depreciation arises for the following reasons:

(1) Ascertainment of true profit or loss-Depreciation is a loss. So unless it is considered like all other expenses and losses, true profit/loss cannot be ascertained. In other words, depreciation must be considered in order to find out true profit/loss of a business.

(2) Ascertainment of true cost of production-Goods are produced with the help of plant and machinery which incurs depreciation in the process of production. This depreciation must be considered as a part of the cost of production of goods. Otherwise, the cost of production would be shown less than the true cost. Sale price is normally fixed on the basis of cost of production. So, if the cost of production is shown less by ignoring depreciation, the sale price will also be fixed at a low level resulting in loss to the business;

(3) True Valuation of Assets-Value of assets gradually decreases on account of depreciation. If depreciation is not taken into account, the value of asset will be shown in the books at a figure higher than its true value and hence the true financial position of the business will not be disclosed through Balance Sheet.

(4) Replacement of Assets-After some time an asset will be completely exhausted on account of use. A new asset then be purchased requiring large sum of money. If the whole amount of profit is withdrawn from business each year without considering the loss on account of depreciation, necessary sum may not be available for. buying the new assets. In such a case the required money is to be collected by introducing fresh capital or by obtaining loan by selling some other assets. This is contrary &0sound commercial policy.

(5) Keeping Capital’ Intact-Capital invested in buying an asset, gradually diminishes on

account of depreciation. If loss on account of depreciation is not considered in determining profit/ loss at the year end, profit will be shown more. If the excess profit is withdrawn, the working capital will gradually reduce, the business will become weak and its profit earning

capacity will also fall.

(6) Legal Restriction-According to Sec. 205 of the Companies Act, 1956 dividend cannot be declared without charging depreciation on fixed assets. Thus in “Case of joint stock companies charging of depreciation is compulsory.

Shoot For the Stars and Settle For the Moon – Forget That Noise – Let's Go All the Way!

Many people believe that we need to get our up and coming generations to shoot for higher goals, not succumb to mediocrity, and when they shoot for those tougher goals, they will not make it more than if they had not . Not long ago, the TED Conferences put forth an old video along this line of thinking, it was a rare clip from 1972, "Legendary Psychiatrist Viktor Frankl delivers a powerful message about the human search for meaning." His message was in a nut shell; "Shoot for the Stars and Settle for the Moon."

But I say; Forget That Noise – Let's Go All the Way! Yes like that famous pop hit with the lyrics; "Ya, Ya, Ya, let's go all the way," because as far as I am concerned, if you are going to go for it, do it, go all the way, not half way and then congratulate yourself. Either you are "in it to win it," or you are not. As far as I am concerned Viktor Frankl, the so-called legendary psychiatrist sends the wrong message to American youth and their coaches, teachers, and mentors.

"Do not try, do!" said Mr. Miyagi in the Karate Kid. A great quote indeed, and it is completely and 100% on the money, that's what matters in life; winning, accomplishing what you set out to do, not trying, or trying and then settling for the less, no way, not in this life time, you must make your life count. Not sure if it's just me but TED, and the people who lean far left seem to believe that simple praise of the next generation is acceptable. Propel their self-esteem with certificates and accolades.

Personally, I say these kids need a good kick in the butt, because half way, is not good enough. Our ancestors did not come half-way to get here, we did not go half way against NAZI Germany, and it's quite frankly un-American to go half way; forget that. Let's go all the way, all the way to the top, the number one slot, where we belong. We have the history, we have the genetics, we have the intellect, and we have opportunity, so there is absolutely no excuse not to.

Do not settle for less in your life, do not give up, do not give in, stand tall for what you believe in, and believe in yourself too, and then we will see you in the winner's circle, where you belong. Personally, I do not believe in second place, or going halfway way, I believe in winning and going all the way!

Questions You Should Ask Your Web Host Before Signing Up!

So, you're looking to build a web-site or so fed up with your current web host that you are eager to transfer your site somewhere? You may not even be aware of your current hosts vulnerabilities in an industry where each week there is news about a host going down for one reason or another.

Your first problem is narrowing the thousands of choices down to a few that you can research further. Seek friends or associates that have a web-site and ask for their advice. Visit one of the lots of forums about hosting, ask the members for advice or search threads from those that have asked before you.

Once you have located a few hosts to research, the ten questions below will take you a long way towards making an informed decision. You may be capable of finding lots of the answers to these questions on the hosts websites, but always feel free to call the host and quiz them about their operations. The quality of the answers and degree of professionalism you get from a possible host often transfers to the type of support you will get once you become a customer. Without further ado, the ten query to ask your web host:

1. How long has the net host been in business?

3. How lots of upstream web providers does the net host have?

2. Does the net host own its information middle?

5. Does the net host provide 24/7/365 phone and electronic mail support?

4. Does the net host monitor its customers sites twenty-four hours per day? How?

6. What levels of redundancy does the net hosts architecture provide?

7. Does the net host automatically backup customer websites in case of information loss? How often?

9. Does the net host provide the features that you require for your web-site?

8. What is the net hosts billing policy?

10. Does the net host have the products and services to handle your growth?

1. How long has the net host been in business?

The length of time that a host has been in business can be related to their ability to provide a quality, reliable product. If your host can satisfy its customers, then those customers are likely to stick with the hosts service. Therefore, stay in business. there's, coursework, situations where this is not applicable or becomes a bit hazy. Be positive to also inquire about whether a host has recently been involved in a merger, acquired what was once a widely known brand name, or launched a used brand. If any of these apply, then delve deer in to the story behind what has happened and determine whether quality resources are still with the company.

Complete a domain name whois lookup of the host: Type in the net hosts domain name and determine what year the domain was registered. If only registered in the recent past, ask the host about it. If the domain name was recently registered this is not necessarily a red flag. basically inquire with the host about it. they may have recently launched an affinity-based brand to cater to your market.

Type the hosts name in to a search-engine and check out the results that you get, other than those from the host itself. You may run across reviews, interviews, or industry articles about the host.

2. Does the net host own its information middle?

A information middle is the foundation from which all products and services are built on. If your host owns its own information middle, then they are likely entrenched in the hosting business. they also have an experienced staff and knowledge base from which to draw from when supporting your web-site and building new products. In other words, if a host owns its own facility, then it controls more of the variables that can make or break your web presence.

3. How lots of upstream web providers does the net host have?

Your web-site performance is not a measure of your web server's speed. The ability of your web host to route traffic through the cleanest web connections is also of great importance. It is critical that your provider has multiple connections to the net. Accidental fiber cuts in construction or telecom work and information middle equipment failure may cause your site to go offline for an extended amount of time.

This can be avoided if your web host has other connections to the net that will reroute traffic that would have normally been carried on the failed circuit. Yes, this means your host must also have additional capacity on hand to handle normal traffic levels when one connection is lost; which is another area where a host can try to cut cost. This is much like when driving your automobile, there's several streets that you can take to get to your desired location. sometimes you will encounter construction or an accident that will require you to take an alternative street. Well, the net works the same way. there's several routes that traffic can take to a location. Your hostought to be able to select the cleanest, or most efficient, route to your web-site visitor. In fact, your hostought to be able to continuously tune these routes to find the best path to your visitors.

Another way to accomplish this is by minimizing the number of different networks traffic will pass through before reaching its location. It is important for your host to have direct connections to networks that have lots of eyeballs. In other words, your web-site will be served better if your web host is using connections with networks that facilitate web access to large volumes of subscribers.

4. Does the net host monitor its customers' sites twenty-four hours per day? How?

There's a couple of factors that can influence the answer to this query. Does the host own its own information middle? If not, then they are physically removed from their servers and supposedly paying a co-location company to provide monitoring for them. When another company controls the environmental systems that provide the home for the host, one can appeal that you have created another potential point of failure; that being the communication of an issue from the information middle to the net host. That point of failure can increase the latency between an issue and its resolution, leading to increased downtime for your web-site. Second, if your web host has an issue with its own infrastructure, then there may be travel time associated with their engineers getting to the information middle to resolve it or, once again, increased latency by trying to remotely resolve an issue.

You might be surprised at how lots of web hosts do not provide 24/7/365 support. The industry's hosts run the gamut from only electronic mail support to providing phone and electronic mail support 24 hours per day and 365 days per year. The best way to eliminate not having support when you require it, is to select a host that can assist you whenever you require it. When an idea wakes you from a slumber at 3 AM, it is good to have your host on the other end of the phone to speak about it. When your site malfunctions due to a programming glitch the night before your store is to open, it is amazing to have your web host on the phone to decipher the issue with you. When your cat accidentally deletes some important files, know that your host is there to help recover them. Also make positive that your host is providing support over the major holidays. lots of web hosts will close their support middle, decrease their support to only electronic mail, or send their support team home with a pager to be called in case of emergency. All of these decreases can generate latency if your web-site goes offline. And, holidays are often days which persons will spend time on the net after they have done all of their social designs. Matter of fact, word-of-mouth business is one of the most effective means to customer acquisition. When people get together, they exchange ideas.

5. Does the net host provide 24/7/365 toll free phone and electronic mail support?

6. What levels of redundancy does the net host provide?

A web server is the hardware and application combination that serves requested web pages, files, or other information. Servers answer requests from web browsers to provide information from websites, electronic mail, and databases. they then send that information to the requesting browser. Load balancing divides the amount of work that a server has to do between multiple servers, which also adds redundancy, so that more work gets done in the same amount of time and, in general, all websites requests within the network get served quicker. The load balances stay in constant contact with the servers to determine how busy they are and / or if one of them has failed. It may sound like a no-brainer, but having your site connected to the net is the whole reason for having a web-site as well as a load-balanced, redundant network is vital to that endeavor.

Failures that cause your site to lose connection can happen. Therefore, it's crucial to discover a provider whose hosting architecture provides the least-risk of failure. Redundancy is necessary. Single points of failure are very bad, but lots of hosts try to cut costs by risking single points of failure. Ask your web host about their redundancy in server architecture (web, electronic mail, and DNS servers), load-balancing, and file storage.

Has your electronic mail server ever been down? Redundancy is also vital for electronic mail and DNS servers. A Domain Name System (DNS) server translates requests to locate a web-site. As you can imagine, keeping electronic mail and DNS servers online is a mission-critical task for a web host. For file storage, seek a host that makes use of a reliable storage solution with multiple auto-fail over and hot-swappable drives to make positive continuous delivery of your web-site.

7. Does the net host automatically backup customer websites in case of information loss? How often?

Backing up websites bought to be a scheme part of your web host's operation. Backup is the activity of copying files or databases so that they are going to be preserved in case of equipment failure or any other catastrophe.

Look for a web host that provides a money-back guarantee. This will let you try out the hosts service. You bought to find that the service is sub-par in site performance, reliability, or missing the features that you seek, the ability to request your cash back, within the parameters of the guarantee, is priceless and liable to save you from later trouble. It is always a good to idea to inquire about the net hosts cancellation procedures. there's lots of hosts out there who require you to send them an electronic mail or make a phone call to cancel, which can extend the timeframe to cancellation. A host who is confident in their service will have a cancellation form or online avenue within their control panel. Now, they will also also have a retention program, so dont be surprised when they call or electronic mail you to ask why you are leaving. After all, your feedback helps them to evaluate their service.

8. What is the net hosts billing policy?

9. Does the net host provide the features that you require for your web-site?

A domain name, but be positive to look for hidden registration fees or renewal fees sometimes people select a host because it has the exact feature set that they require, but later find that feature set means nothing when access to those features is unreliable. Make positive that a host has your desired features and is also reliable. To make positive that the host you are evaluating is everything you require, use the following list: An example amount of viral electronic mail accounts including web-based, POP3, and IMAP electronic mail spam filtering and virus protection are a must these days, unless you are providing this by yourself disk space to meet your sites needs every month bandwidth allotments that will cover your traffic and the ability to increase that allotment based on your sites success site building tools such as extensions for FrontPage or other online / downloadable site building programs Ease of upload to your site by FTP or other means Access to a sturdy traffic analysis program or the raw logs for you to scheme yourself Programming languages, including CGI, PHP, MIVA (if needed) Database capability, dependent on your application preference ecommerce shopping cart options.

10. Does the net host have the products and services to handle your growth?

You might be surprised how lots of sites that once started for fun or as a hobby have grown in to a number of the most popular sites on the net. Here, you never know when you will outgrow your current product or service and require to move up the ladder to the next rung. Make positive that your web host can meet your anticipated growth, not only within the product range of shared hosting, but bought to you ever require a dedicated server or co-location solution, your host is there to speak about and provide the best solution.

Do your home-work by using the above questions as a template and you will likely save yourself some major chairs down the road. If you have gathered information about multiple hosts, you can now compare apples to apples and select the best host for your needs. Hopefully, the work that you have done will avoid forcing you to make use of your gut, but make an informed decision based on the facts. sometimes, the best piece advice that you will find in any article or forum about choosing a host is, if something seems good to be true, then it probably is.

Decorative Outdoor Gas Fireplaces

The ongoing trend in the youngger homes is an outdoor open fireplace. This is an amenity that the households are interpreting to make their outdoor living place more fun and useful, all the year round. Many people like to sit and unlax in their backyards, after a day full of hectic work. However, the air becomes cold at night and in the absence of a eligible outdoor gas fireplace, it is problematic to sit outdoors. But thanks to outdoor fireplaces, you can now enjoy your outdoor space!

Outdoor fireplaces can either be free-standing or built-in structures. They can range from pastoral plainness to appealing extravagances. A built-in fireplace can definitely be a centerpiece in any area. The fireplaces are mainly planned by landscape architects and designers, whereas some are built by pool and spa professionals.

It is easier to buy pre-fabricated fireplaces that have been built with safety in mind. But if you are confident enough to build it from scratch, then materials can be bought from any home improvement store as well as those specializing in garden or outdoor materials.

Fix the area where you want to put the fireplace. Follow the instruction from the maker to assemble the fireplace together. Outdoor fireplaces can be set up just like indoor fireplaces, except that you do not need to instal a damper.

After installing the pre-fabricated fireplace, you can now add completing touches to your fireplace. Try adding bricks and blocks and then apply concrete or rouge with any color you like. You can even give your fireplace a stucco finish for getting that Mediterranean look.

So treat your garden or backyard with a nice looking and sophisticated outdoor gas fireplace!

Options For Pet Proof Carpeting

The task of choosing new carpet is a bit confusing with the numerous types on the market, and when animals are a part of the family it becomes even more perplexing for a number of reasons. Animals can be rough on a home, and particularly the carpet when they rough house. Their nails often catch on the fibers and cause a great deal of destruction. Cats occasionally cough up hairballs and then leave behind spots that are hard to remove. When shopping for carpeting, it is good to select those options that are stain proof and long lasting. The following information will help you choose pet-proof carpet that will stand up to roughhousing, long nails, and all types of stains pets leave behind. It is alike possible to obtain pet proof carpeting that will last for many years to come.

Selections that are Resistant to Stains and Pet-Proof. When shopping for new carpet it is important to choose a variety that is pet-proof and resistant to all types of stains. Do not assume that all carpets these days are stain-proof. Look for stain resistant labels and ask questions when thinking about the numerous available choices. However, stain-resistant carpeting will repel stains but it is not indestructible. The fibers will not as easily absorb stain-causing liquids, but this does not mean that spills and spots can be ignored. It is still cruel to blot up liquids and remove solid spills as soon as possible, and it is of the highest importance to follow product labeling concerning care and maintenance.

Steer Clear of Carpet that Snags. Stains are not the sole problems when animals are members of the family. Snags are a big concern, and Berber carpet is far from being pet stain resistant. This type of carpet snags more often than any other carpeting on the market, and once it begins snagging, like an unraveling thread, it keeps on unwinding until it reaches the other side of the room or until the snag is halted and the damage is taken care of. Carpet repairs can be very expensive, and Berber should be avoided at all costs when looking for pet-proof carpeting. Many pet proof varieties are available that will not snag or become seriously destroyed.

Color Selections. Taking into account the spots and stains that cats and dogs can and do leave behind, avoid light-colored carpeting when looking for a pet-proof alternative. If your pets have lighter colored fur, you should avoid dark carpet as it will better show shedded fur. Opt for mid-range colors, and considering selecting a variety that includes more than one color. When selecting carpeting, keep in mind that solid colored carpets are more apt to show stains while variegated or mottled varieties are not.

Tightly Woven Low Pile Options. The best choice when purchasing animal proof carpet is those carpets that feature short pile and have tightly woven fibers. Commercial grade carpets typically used in apartments and hotels are pet-proof and people-proof. Constructed to withstand use and wear and stain-resistant, these are the most optimal selection.

Visit your local carpet retailer, and ask to see samples of commercial grade low-pile stain-resistant varieties. This particular style may not be your initial choice, but Berber, which is nowhere near as favorited as it used to be, and Frieze, which is regarded as the new shag carpet are not pet-resistant or an ideal choice. With appropriate care, the investment that you make in your pet-proof carpet will pay off with carpeting that lasts for many years.

Handy Tips To Help You Make Your Own Wood Wicks For Candles

Wood wick candles are the newest rage in candles. These painted candles have a wick that is made of a particular kind of wood that allows the candle to burn not only with a pleasant fragrance but it also has a familiar crackling sound much akin to wood fire in the fireplace.

If you make your candles then it is possible for you to make these too. There are a few tips to help you make your own wood wick. You will need a few strips of hardwood which are the dimensions of a Popsicle stick. You should choose a hardwood that burns at a very slow rate like olive, ash, walnut and eucalyptus. Also, you need to remember that these wood wicks are to be used only when making jar candles.

Now that you have the strips you must lay them out and place them next to each other without touching at all. The surface that you place them on should be a flat surface and they should be allowed to lay like that overnight. The next day you will need to prime the strips. To do this you will have to heat some wax in a double boiler. You should now take one wick at a time a dip it in the wax with the help of a paperclip clipped to it. Once removed it takes about 30 seconds for the wax to dry. Once the wick is dry you can store it in a metal holder and use them the next time you make your candles.

Brick Pointing Techniques For New and Old Brickwork

Brick pointing is the method of applying a small amount of mortar into the face joint between bricks. These bricks can either be newly laid ones or old brickwork. In new brickwork, pointing is done to apply harder mortar to increase weather protection on the exposed faces. In old brickwork, the method is used to repair the mortar joints that have been eroded by exposure to various elements.

For laying new and old brickwork, there are several techniques that need to be followed in order to do the task properly.

On new brickwork, brick pointing should be done at convenient intervals. Breaks at convenient points must be held to allow sufficient time for cleaning out the surface mortar of the section. The mortar in the joints should be scraped to a depth of about 12 mm from the brick surface. A wall can only be pointed when it has been completed.

In terms of old brickwork, the important brick pointing techniques include chipping out the old mortar and pointing it to a right depth. The standard depth is 12 mm from the brick surface. In removing the old mortar, angle grinders are often used. Take note that the process will cause a lot of dust, so you better wear face mask and goggles as you do the job.

Once the wall is ready to be pointed, the brick pointing techniques for the mortar follows. Make sure that the joints are wetted first before being filled with the pointing mortar.

Make a fairly stiff mix of the mortar and put a small amount on a hawk. In cutting off slithers of mortar, a small pointing trowel can be used. Hold the mortar up on the edge of the trowel and press it into the joints to be filled. Then, carefully draw the blade backwards. Repeat the steps until the mortar is flushed with the face of the bricks.

Do the brick pointing techniques by filling the vertical cross-joints first, followed by the horizontal bed-joints. When more than a square meter has been filled, finish it using the required style.

The Two Methods of MEP Coordination

MEP is an acronym used for Mechanical, Electrical and Plumbing systems for building projects. With the increasing complexity and functionality of each system, MEP activities are not limited to the traditional mechanical, electrical and plumbing system but also include fire protection, gas piping, process piping, pneumatic tubing, data systems etc. This article asserts that the design has been completed by 'Design Consultants' to a certain stage and then handed to 'Installation Sub-Contractors' who will validate the design and value engineer the design through the process of spatial coordination and procurement of components to meet the requirements of the design. The coordination of mechanical, electrical and plumbing (MEP) systems among them and with other building systems including architectural and structural disciplines is a critical, challenging and time consuming task, especially in complex building projects with intense MEP requirements. The coordination process of Mechanical, Electrical and Plumbing (MEP) systems involves defining the exact location of each building system component throughout the building within the constraints of the envelope defined by the architectural and structural systems to comply with divers design and operations criteria avoiding any interferences / clashes among building systems. Assuming that most companies undertake the task of MEP Coordination, without which the site installation from a 'design only' set of drawings would be too much of a risk, there are two ways by which the following process takes place:

2D MEP Coordination
The process starts with the design from the Design Consultant. The Sub-Contractor team will typically update the 2D CAD drawings or create their own set from the start. In creating these drawings a number of sections will be drawn and frequent attention given to ceiling void spaces in which the systems and services are being laid out. In an ideal world 2D MEP Coordination can work as long as all services and systems are assessed adequately and then drawn into a 2D drawing. The sizes of the systems would need to be manually added as would the heights and distances from gridlines or walls. The contractor will have teams of people for each system (HVAC, plumbing, electrical etc) creating their drawings based on the architectural ceiling void. In this method, there is no automated system to identify the conflicts in the MEP system and therefore there is a high degree of reliance on the intuition, imagination, technical knowledge and experience of the team members to lay out the services without site teams experiencing clashes .

Visualizing the potential clashes is made more difficult due to changes in ceiling profiles, not to mention the challenge of having to understand the impact of all systems as well as structural and architectural elements that may impede or impact a system or service route. What makes things worse is that a third party can not easily review the drawings for any errors, nor can the design be easily reviewed or communicated with a project team. Furthermore, if there are changes to the design or procurement-led changes then the process of undoing and re-doing 2D MEP Coordination projects becomes very cumbersome. The inherent weaknesses of 2D CAD software also come into play, one can draw something of one size and label it as something completely different. As the systems and services drawings are not checked in some form of automated method there is no guarantee that the 2D MEP coordination process will generate a clash free drawing. During the time of complex projects, it requires multiple section views which consumes a lot of time. These time commitments come with additional costs to each contractor.

3D MEP Coordination
This process is more collaborative and allows the ability to communicate the progress of the project quickly and easily, providing 3D visuals that resemble the final system and service installation. It starts with a clear direction in terms of spatial zoning which is then used as the basis to start modeling the HVAC, piping, plumbing and electrical services. As the architectural and structural models form part of the model, it is easier to insert services and systems without creating clashes. Once the model is complete and all systems and services have been added, the ability to identify problems becomes much easier compared to the 2D Coordination method. Firstly, one is able to walk through the model using roaming software to review the model and, secondly the use of clash detection software, such as Navisworks, highlights all clashes where these are systems against other systems or systems against structure or architecture. Once highlighted, all clashes can then be corrected during the coordination stage of the project. Only once the model is interference free are drawings created. This leads to another set of benefits, unlike 2D coordination where each section must be drawn, the 3D software allows the creation of sections that are directly taken from the model. Furthermore, as the 3D software is so intelligent, the sizes of systems are directly taken from the 3D model and therefore there is no chance of services or systems being modeled as one size and then labeled as another. Beyond the coordination stage, there are several other benefits from the 3D model, including use during facilities management, energy analysis and so on.

Irrespective of the MEP Coordination method used, the need for MEP Coordination arises due to the lack of detailed coordination during the design stage. Additionally, the need for fabrication and installation of building systems in accordance with industry and Sub-Contractor best practice requires MEP Coordination to be carried out by them. The 2D MEP Coordination process provides a limited interference-checking capability and therefore can and will result in more problems on site including additional re-work, change orders and inflating budgets. All of this makes 3D MEP Coordination a more efficient and the increasingly preferred method for the long term.

Current trends in the MEP industry show the evolution of a few more specific methods of MEP coordination, with varying degrees of involvement by the design consultants and the MEP contractors.

These methods are:

  1. Design consultant provides 2D, 3D designs and MEP coordination to the MEP contractor.
  2. The MEP contractor generates the 2D, 3D designs and MEP coordination itself / herself.
  3. Design consultant provides 2D design to MEP contractor, who then creates 3D models and handles MEP coordination.

The first, and one that is gaining increased popularity, workflow method is one where design consultants provide a spatially coordinated BIM model with MEP specification components, structural and architectural changes. Therefore, the BIM model is usable by the contractor.

The second method involves the MEP contractor designing all the models, both 2D and 3D, for installation. One of the disadvantages in this method for the contractor is added stress, since the contractor is liable for the design and may not be able to employ designers with requisite expertise and he / she may even have to provide design liability insurance. There are benefits though, one is removal of abortive work for BIM modeling due to efficient use of time and then, increased profit.

Method No. 3 sees the design consultant supply architectural, structural and MEP designs in 2D to the contractor, who then creates a 3D model to assess the design. This method may face hiccups in the process because certain discriminates will be represented in 2D and some will be in 3D, with different software used for each. So, if the contractor faces any issues, s / he may necessarily revert to the designer, who will alter the 2D design, and then the change has to be represented in 3D. Obviously, delays could result.

Additionally, useful features of the process have mushroomed. Quant take-off analyzes projects with a new degree of detail, taking into account quantities, locations and extremely costs. Further, just as 3D BIM permits visualization of the completed project, 4D BIM scheduling movies lets owners, traders and teams see how the building comes together. It can be used to monitor the project on-site . Also, BIM 360 Glue generates a coordinated model, consisting of individual models that all team members can look at. This can be 'glued', or updated models can be uploaded, on a regular basis. Each user can resolve clashes faster by comparing models and directly communicating with each other.

In the dynamic world of MEP coordination, new methods and features promise to crop up with unceasing regularity. The key is finding the method that works best for you.

Some Awesome Starter Vendors for Business Credit Building

You must start a business credit profile and score with starter vendors. Starter vendors are ones who will give you initial credit even if you have no credit, no score, or no tradelines now.

Most stores like Staples will NOT give you initial starter credit so DON’T even try applying.

Here are some awesome starter vendor accounts to consider:

Laughlin Associates, deals with corporate setup and compliance. Report to Experia. Only 411 listing and EIN required. Reports in 30-60 days and net 30 Terms.

Quill Office Supplies, office, packaging, and cleaning supplies. Report to D&B. Must place initial order first unless D&B score is established.

Usually they’ll put you on a 90 day prepayment schedule. If you order items each month for three months, they typically approve you for a Net 30 Account.

Gempler’s, work supplies and products. Report to D&B. Place initial order over $50 and select “Invoice me” option.

They will pull credit. If not approved, pre-pay for order and keep purchasing and choosing “invoice me” option until approved for Net 30 account.

Reliable Office Supplies, office supplies and promotional products. Report to D&B, Experian and Equifax.

Place initial order, then request your order to be invoiced or billed to your company. They will pull your credit.

If not approved, keep ordering and requesting to be invoiced or billed. The more orders you place the better your chance of approval for Net 30 terms.

Uline Shipping Supplies, shipping, packing, and industrial supplies and reports to D&B.You must have your DUNS number.

They will ask for two references and bank reference. First few orders might need to be pre-paid to initially get approved for,Net 30 terms.

Monopolize Your Marketplace, everything you need to know about marketing and business 10 audio CD set. Report to Experian and a true starter account.

Upon check out choose “4 equal payments of $59.99” option and first charge takes place in 30 days. Need bank account, EIN, and deliverable address and 30-60 days for reporting.

You might need to get some vendors you won’t often use just to build your initial credit. Do NOT put your SSN on the applications.

Remember to pay your bills EARLY, the key to a good score.

Do NOT start with store credit… you’ll get denied… wait until you have five accounts reported.

And do NOT apply for cash credit until you have 10 reported accounts.

Contact us today to learn more about building credit for your business!

Learn the Different Putters Made by Odyssey in 2011

Odyssey putters have been around since the early 1990's. They have consistently been one of the most popular and most used putters in the game of golf. Many pro and amateur players use them, and once used players usually do not stop using them. Some of the most innovative and best putter designs have been Odyssey putters. They feature many different putter head inserts and alignment devices, which make them stand out from the rest of the field. Odyssey is always chasing to be the # 1 putter in golf with its new ideas and products.

In 2011 there was some unique and different design features produced by Odyssey golf. They vary from convetional putters, belly putters, dart series and women's putters, with different alignment and insert design features installed on each. The two conventional odyssey putters from 2011 are the, Odyssey White Ice 2-Ball Lined putter, and the Odyssey White Ice 2-Ball Blade putter. The 2-ball lined putter is an extended mallet head that features the revolutionary 2-Ball alignment system with a line as an additional alignment aid, a double-bend shaft and full-shaft offset. The 2-ball blade putter is an extended blade-like putter head that has the same alignment system as the mallet 2-ball, a crank-neck hosel and full-shaft offset. Both are outfitted with a weighing system with three different options of weight, so you can adjust the weight of the putter to fit the speed of the greens or what feels more comfortable to you. Both putters feature the white ice insert, which is firmer and stiffer to promote more distance control and more top spin on your roll.

Blade: New- $ 149.00 Pros: Great Feel, Accurate, Looks Great. Cons: None.

Mallet: New- $ 149.00 Pros: Durable, Well Balanced, Accurate. Cons: Did not like grip.

Belly putters are becoming very popular. Odyssey's belly putter for 2011 is the Odyssey White Hot XG Sabertooth Belly Putter. The dual fangs of this Odyssey White Hot XG Sabertooth Belly Putter contain 37% of the putter's total weight. This Weigh placement helps you make a more consistent and accurate stroke. The aiming channels on the inside of the outer fangs insure proper alignment. The Sabertooth is constructed of a soft core, which has great feel and promotes a truer roll. A thin firmer outer layer provides responsiveness. The multi-layer insert allows weight to be shifted to the perimeter of the head for better stability. The belly model features a mid-length, double-bend shaft with full-shaft offset.

New: $ 189.00 Pros: Feel and Touch. Cons: Akward in the bag, Expensive.

The Dart Series Putters specialize in providing excellent alignment. There are three different Dart putters for 2011. They are all conventional putters.The Dart Series Putters specialize in providing excellent alignment. There are three different Dart putters for 2011. They are all conventional putters. They are the Odyssey White Ice Dart, The Odyssey Backstryke Dart, and the Odyssey White Ice Dart Blade. The Odyssey White Ice Dart has a mallet head with a double bend shaft, and has the adjustable weighting for different green speeds. The Odyssey Backstryke Dart is unique because the shaft is offset behind the putter, which promotes a hands forward position, which in turn produces an ascending stroke into the ball. The White Ice Dart Blade is a blade putter design, with a crank neck hosel and a full shaft offset and also has the adjustable weighing system. Dart stands for Direction and alignment technology, which basically looks like a dart on the top of the putter which helps you align your putts better for a more consistent strike and better distance control.

White ice mallet: New $ 149.00 Pros: accurate, great feel, durable. Cons: none.

Backstryke: New $ 149.00 Pros: accurate, great feel, easy to align. Cons: small sweet spot, to light

White ice blade: New $ 149.00 Pros: accurate, great feel, the look. Cons: none.

What Does Door to Door Service Mean?

Some terms in the shipping industry can be confusing for shippers to understand. Door to door delivery looks to be one of them. One of the biggest problems is that companies do not always see that door delivery means to the door, of the warehouse of course. They think that door can mean to their customer's door which can be true only on a drop ship or direct ship, but they do not understand it to be door. So to clarify, Door to Door delivery means that the freight forwarding company will pick up the shipping container from your warehouse and bring it to the port. Then they gate it in and file the necessary paperwork and retrieve it on the other side to be brought to your consignee's warehouse.

Since a door to door delivery means a through bill of lading that includes trucking, there will also be additional charges added on your bill of lading. Many times however, a through bill of lading will actually have lower freight rates than if you were using different shipping companies. This is definitely something to consider when trying determining if you will need a door delivery. Using separate companies means more interaction with shipping companies, but it also allows for closer managing so it will depend what is best for your company.

No matter which type of delivery you choose, it is important to know what all of your options are before shipping. Even just a small amount of legwork can save a lot of money in the end.

This type of delivery could be the best shipping shipping experience available. Start your shipping experience for door to door by submitting online your request for freight service. Requiring little more than a few keystrokes and clicks of your mouse, take advantage of this opportunity to indicate your cargo requirements and preferences in the form provided. Please make sure to indicate door to door service when signing up online and you will receive it.

When you detail all your requirements upfront, you can receive great options for door to-door. If you do not detail your requirements upfront, then you may not get the best door to door service that is appropriate and unique for your freight shipping experience. And make sure that you work with a trusted freight forwarder who can provide you with outstanding freight services that work for door to door.

How Doors Can Lighten a Room

The popular TV programs being made about people building their own self-designed homes are watched by millions. These buildings are typically shaped to fit the land they are located in or to meet the preferences and quirks of the owners, which can mean very visibly different houses. One thing that does appear to be a constant about these homes is that they almost always have a large amount of glazing, often employing large sliding windows which offer expansive views from the inside and which can be opened up for easy access to the outside space. These illustrative glazed areas are often the most expensive single item on the project, so why do people feel the need to spend their money in this way?

It seems fairly obvious that introducing more light into the home is something people feel is important and this is quite understandable as who does not feel better on a bright summer's day than on a rather dingy day in winter? Light is a precious resource and it is natural that we should want to maximize it to enhance our lives, however, building our own home with a wall entirely made of glass is not an option open to everyone, so what the less foster among us do? In years gone by, any aperture even if it was glazed was a sure way to lose heat from the house and before central heating keeping warm was a significant preoccupation for the residents. So the question was how to get more light into a house without compromising the need to keep warm.

One of the darker parts of any home is the upstairs landing as it normally has no natural light being merely a means of access to the rooms leading off it. You may not notice in older homes that there are often windows above the doors on a landing (known as fanlights) to allow light from the rooms off the landing to be introduced into what would otherwise be a rather dark and unwelcoming space. This was a rather limited way of creating more light but interior designers were constrained by the fact that glass was a potential hazardous material as it shattered it was dangerous to the occupants. The development of safety glass which is now used in glazed doors has meant this is no longer a constraint and more light can now be bought in through the glazed panel in the door, which is much more effective than a fanlight!

The creative use of glazed inner doors in many homes has meant that not only is more light introduced but it can be done with style and as part of an overall design theme. Improvement production processes mean that glazed doors are within the pocket of most as is the opportunity of using them to enhance a home. The choice of glazing used to be clear or frosted, (usually for the bathroom) but now, there are a variety of glazing options to suit all tastes. Clear glass is still available but there is also bevelled, diamond cut and even etched patterned glass to make a glazed door really be a design feature as well as carrying out its main function of light enhancement.

The modern trend towards having a light and airy living space lends itself to having more glazing as part of the interior design. There are a lot of glazed internal doors in the market and suit both traditional and contemporary settings and can really open up a room and flood it with natural light, so there's no excuse for sitting in the dark!

Talking Cars From Movies and TV

Surely, at some point in your life, you have owned a car and rented that it would come to life in an instant. There are some iconic cars from movies and TV that make us have car envy and hope that with a push of a button we could be in the Batmobile. Here are a few of the top iconic cars from the movies or TV and their features.

First off, Pixar's film "Cars". This movie follows Lightening McQueen (played by Owen Wilson) while he tries to make it back from the run down town of Radiator Spring in hopes to win the Piston Cup. There are many other characters that we meet during McQueen's journey, Mater the loveable tow-truck (played by Larry the Cable Guy), Sally Carrera (Bonnie Hunt), and former Piston Cup winner Doc Hudson (played by Paul Newman). This race car is a new rookie for the races and can reach extreme high speeds. He has some interesting features that model actual race cars, like having stickers instead of headlights. However, this car talks, has eyes, and has a winning personality.

Next on our list is KITT from Knight Rider. KITT, Knight Industries Three Thousand, is a sporty 1982 Pontiac Trans Am and has an artificial intelligent computer installed that allows it to help Michael Knight (David Hasselhoff) fight crime. KITT (William Daniels) has a special body armor that protects it from just about any type of firearm and can resist extreme heat. The super computer on wheels of course could talk, but not only that, he was fluent in Spanish and French, and even has a variety of different accents. This really was the best car ever for any human crime fighter since it could talk, smell, hear, could examine the area, had an array of weapons, had different modes like silent mode, and of course he could still function as a regular car . Pardon me, an awesome car.

Herbie is a very iconic car which lands it in the next slot on our list. This old school Volkswagon Beetle race car actually in habits the human soul who made him named Herbie. Herbie can function just fine on its own like any normal car: driving itself, reasoning, thinking, knowing the difference between good and evil. Ok, so normal cars do not do that last one, or any of those. But, Herbie does race and help its owners survive different situations and helping good hope over evil.

Some people can be obsessive about a car, but what about a car obsessed with it's owner. That is the case with the car Chrstine. In the movie, Christine was portrayed as a 1958 Plymouth Fury who was obsessed with her owner Arnie (Keith Gordon). Christen takes it upon herself to find those who insult, hurt, or attempt to separate her and her love, Arnie. She can not talk like some of the other cars like KITT of Lightening McQueen, but like Herbie, it's as if her soul is trapped inside the car. And, what a soul it is. Christen will wreak havoc to anyone who does her Arnie wrong, no matter how much it may hurt her. Hell hath no fury like a woman, um, car scorned.

How To Build Depth In Your MLM Business

Should I build depth in my organization, or should I build width? This is quite a valid question which every MLM business owner need to fully understand in order to create wealth and security.

But as you continue to build your business and you get more experience and knowledge you will begin to appreciate the wisdom of building depth and more depth, rather than building width like a brush fire. In-fact the fun really begins, as you continue to build depth in your MLM business. And right off the top you need to know and understand this fact.

“Building width creates profitability while building depth creates and guarantees long-term security”.

Explanation:.. As you begin to build your group, your group will expand both in width, 3, 4, 5, 6 legs or so, and each leg will also build deep, maybe 5, 6, 7, 8 generations in-depth. There are some pretty good Compensation plans which will reward you handsomely just for creating width in your group. As you create more width they will pay you more commissions and bonuses.

Then there are also some pretty good Compensation plans which will do the opposite and reward you handsomely for creating depth, as opposed to creating width, or as well as creating width. The question here is which building structure is better. And really the answer is simply what is more important to you? Do you want a quick buck or do you want stability and long-term security?

Here are some facts to consider. The wider your group becomes it’s the thinner you are spreading yourself. The more work you will have to do and the more frustration you will encounter, with little security. But if that is what the Compensation plan requires, and that is what you desire, then that is what you must do.

On the other hand if the Compensation plan is much more rewarding towards a building structure of depth, then you are smiling, because you simply may have to concentrate on perhaps only 3 to 5 legs, which makes life so much easier. This is where you are now looking for leaders in-depth rather than in width and this is a lot more fun because as you find leaders in-depth and you work with them and build more depth, you are actually building security by backing up leaders with leader. The more leaders in any leg, usually it’s the more income generated in that leg. More income equals more belief and commitment. When you have built 4 to 5 strong knowledgeable leaders in-depth who are duplicating exactly what you have taught them, that’s a diamond leg. No quitting here. You now have total, long-term security.

And remember every person knows or can be a lead to a real winner. You must believe this fact. I have seen the results time and again. The key here is everyone is important.

As you build depth, remember you are always looking to work with the sharpest person on that new enrollee’s list. You as the leader always want to work with the sharpest person to make sure that new person is getting the correct information. And as you work with the sharpest person you are also making sure that Jane or John, whose new enrollee you are now working with, is working with the others on her/his list.

So what you are effectively doing is working with the sharpest person from Jane’s/John’s list (Free lead) and also making sure that Jane/John is learning the business and duplicating you, as you teach her/him to do exactly what you are doing. Here is the wisdom in building this way. You always want to build relationship with your key people, or most excited people, especially in-depth, for several reasons.

A) You want to make sure those key people are being taught the right information.

B) You want to build friendships in-depth, especially with key players, or people who are excited, because if Jane/John quits that person is now a friend of yours and would more than likely stay in the business. Mainly because of the relationship and trust you built with that person.

C) As you build depth and you become friends with the key people or the excited people in each leg there is a great chance that the Jane’s/John’s, who might not be too excited about their business will hang in there a bit longer as you build “fire down below”. This means you are also doing this for the Jane’s/John’s, who may or may not be a friend of yours.

Ultimately you will agree that building depth the right way is extremely critical. Finding a Company with a Compensation plan which compensates handsomely for building depth will always be the best find you can ever make, in this industry.