Living Near a Cemetery

One aspect of a Feng Shui evaluation is to analyze the environment surrounding a building. When using Feng Shui to choice a home, most Feng Shui consultants will tell you not to pick one close to a cemetery. After looking at a beautiful home this past week that just happens to have a cemetery adjacent to the back yard, I decided to take another look at the idea of living near a cemetery.

Why care about what surrounds your home? Why not just focus on the internal energy? Well, simply put, the outside energy affects the internal energy of your home. Too much Yang energy is easier to feel than too much Yin. Here’s an example. Think of a home that has a busy highway running behind it. The fast moving energy and noise pollution gives the inhabitants an unsettled feeling, even on the inside of the home. A home like this would be described as unbalanced because it has energy that is too Yang. Yang energy is bright, loud, and hot.

Having your home next to a cemetery is just the opposite. The overall energy becomes unbalanced as well. Homes next to a graveyard or cemetery are too Yin instead of Yang. Energy that is overly Yin is harder for us to feel, though. Although viewed like a quiet park by some, others are very unsettled by the quiet process of decomposing that is occurring. Having a Yin home may not bother one at first, but little by little, it can make the inhabitants of that home decline, by reducing their drive. The same can be true of living near a stagnant body of water.

What can be done if you find yourself living in a home you love that is adjacent to one of these situations? First step is to buffer your home from the energy. For example, the house I looked at this week has a ravine full of large trees in-between it and the cemetery. Adding Yang elements to the area near the cemetery would be helpful in balancing the energy. Examples of this would be outdoor lighting, bright flowers, flowering shrubs, a fire pit or a chiminea.  Fire and light are very Yang elements and would work to balance the energy. On the flip side, an example of reducing activity in the house that is too Yang, would be to add Yin elements. Again, adding trees and shrubs which can filter sound and light energy will help. In addition to you could add the ultimate Yin element; earth. A decorative brink or stone wall or even a mound of soil with landscaping on top would help to balance the energy and buffer the home. As always, think about what makes sense in your landscaping before adding remedies.

Making sure your home is sheltered and balanced from external elements will have the biggest effect on the internal energy. Be sure that any Feng Shui consultant you use analyzes not only the interior but also the exterior. This will help to ensure a supportive environment.

How to Improve Semen – Sperm Taste For Gourmets?

"Consuming pineapple or parsley helps sweeten the taste of the male sperm ejaculate. Can there be any truth to this and what other foods affect the taste, for better or for worse?"

Yes, what you eat can influence the taste and smell of your semen – sperm. This is similar to the smell of your sweat on the next day of a heavy spice and garlic full dinner.

Because the average ejaculate consistants mostly of protein, citric acid, fructose, sodium, chloride and smaller amounts of ammonia, ascorbic acid, acid phosphates, calcium, carbon dioxide, cholesterol, prostaglandins, creatine, and other minerals and chemicals which are produced by the prostate gland, Cowpers gland, testicles and many other parts of your body, but shortly by "your body", and your body can only use its stocks and what you eat as the raw material.

Of course, every body has its own formula for semen – sperm creation, but eating less meat (and proteins) and more carbohydrates, vegetables and fresh fruits may improve the taste and smell. For example parsley is a healthy plant and may help making your body juices sweeter.

In general, dairy products create the foulest tasting fluids, alkaline based foods as meat and fish produce a butter, fish like taste. Fruits and high quality alcoholic drinks are good for a pleasant, sugary flavor. Chemically processed liquors may cause an acidic taste.

The semen – sperm ejaculate of each male has a unique taste. When some men have bitter, burnt, sour and strong tasting ejaculates, some others, particularly vegetarians, may have sweet, nut like tasting semen – sperm. But in order to produce healthy and fertile sperm your body will need protein rich in zinc as well.

Strong and significant semen – sperm smell may also indicate an infection in the genital area and men must consult an urologist without losing time.

In the other hand, women also have to improve the salty and acidic taste of their vaginal secretions, but the strong and foul smell may be caused by the lack of cleanliness, better is to visit a gynecologist periodically and keep the consultation records.

Certainly your body's duty is not producing tasty semen – sperm, but healthy and fertile ejaculates. Everything healthy and good for your body is also healthy and good for your semen – sperm. Drink mild water when you wake up and keep drinking more water than you usually drink during the day! Water will help to clean your body's pipeline including your bowels, and drinking 6 – 8 glasses of water daily will help your body to detoxicate. Eat less meat, more vegetables, drink less alcohol and specifically stop smoking!

If your partner really loves you, she / he must love everything about you and your body. Do not spend your precious time to be busy with small details, learn how to be a great lover that your partner is not interested with your semen – sperm taste or smell instead.

Finally, we believe that if two people are in love with each other they will not be too disturbed even the semen – sperm taste is unsupportable, and will find a way to cover this default with condom, flavored lubricant, mouthwash … But the important question is how to produce healthy and good quality sperm, and avoid the transmission of many diseases and addictions to future generations!

How To Speed Up The Spore Game On Windows PCs – Working Spore Speedup Tutorial

One of the most popular online games of the moment, Spore, is unfortunately causing a lot of problems for PC gamers. This game is considered to be one of the most extremely advanced and enjoyable games around, but in many instances, users are reporting setbacks while playing this game on their PCs. Most of the time the problem is that Spore loads or runs at a very slow pace in the computer and users are getting incredibly frustrated with it. If you experience this, you have to check out what is causing this trouble. There are a number of methods to counter this problem and make your gaming experience a more enjoying one.

Why Does Spore Often Run Slow?

When you play this highly exciting video game, it is annoying if the speed is not complementing the pace of the game. Fortunately, this game will be able to run much faster if you follow some easy steps and techniques, thus ensuring a more favorable playing experience. Some of the things you can do include:

  • shutting down the other programs that are running in your computer
  • updating Windows
  • ensuring that your registry is clean & fully operational

How To Make Spore Run Faster

To play Spore at a more acceptable speed, you have to first make sure all other applications or programs are closed. It may be very simple, but it is obviously a very effective solution to this problem. Most players play this game while simultaneously running other programs, which means Spore doesn’t have access to the resources it needs. All applications require a certain amount of memory space to be loaded up in the computer, and if you have several programs that are open, expect these files to compete for the available memory. At times, your computer will have problems allocating the memory that is needed by these applications to run at the same time. If this is happening, Spore won’t run as fast. Simply close down all these programs by simultaneously pressing CTRL, ALT & DELETE keys on the keyboard to open Task Manager. Select the Processes tab from the menu that shows up. Afterwards, remove the applications which have nothing to do with the Spore video game.

The next step that can be done is to adjust the settings of the game. Spore is a fast-paced game and the temptation is for you to crank the settings of the game to its maximum. Unfortunately, doing so can result in setbacks rather than enhance your game’s experience. Using the advanced settings means your computer has to use up more processing power, thus, giving it a little room for the game to run as smoothly as it needs to. The settings should be reduced and it should be to a level that is just enough for your requirements. To do this, locate the game’s “Settings” field and then look for the Video Options/Graphic Options and adjust to a lower level. Hopefully, you will notice an immediate difference in the speed of the game.

The final step is to ensure that your registry is clean. The registry is often the culprit that is affecting the game’s speed. It has been identified as the cause of a lot of errors with other programs because so many failures and breakdowns in your system happen here. The registry is the central database where the vital files, settings, and information are recorded. The operating system has to read the necessary files that are kept here to run all of its programs efficiently. Once this registry becomes damaged, you will notice problems and errors occur, including the slowing down of your PC. Applications may also fail to be loaded up. To ensure you fix this problem, you have to use a registry cleaning program. This registry cleaner tool will scan your system and eliminate errors and address issues that may hamper your computer’s performance.

Reflective Foil Insulation

What is reflective foil insulation (RFI)?

Insulation is a material that is placed on the side of a wall that is internal to space being insulated. RFI is a reflective insulation that has the explicit objective of insulating the inside space from heat generated specifically by light-ie sunlight. You'll likely find reflective insulation at the closest point of contact in which the sun hits the so called membrane of the inside room. This location is key, because the insulation is reflective, ie it bounces light and heat in, generally, the opposite direction. So, if you place RFI at the bottom of your insulation stack, your this will likely produce a sort of greenhouse effect, where whatever heat does get through the initial layers of insulation, will be reflect by the outer reflective insulation but will likely be false enough to be trapped at a rate of 98% back inside the room.

RFI is cost effective; it's a light material, and builders like it because it's amiable in terms of shaping in hard or difficult contorted positions on more intricate roofing and insulation projects. RFI is typically made of aluminum, and is reliably light weight and physically easy to manage.

Again, the location within the stack of insulating materials should be at the top or closest to the point of contact, ie closest to the sun. RFI is known to reduce the amount of heat that lower lying insulating materials have to absorb by a rate of 15 to 65%, depending on the quality, the thickness, the engineering of the aluminum.

RFI is reliably cheaper in the Atlanta, Phoenix, Miami, and Los Angeles metros due to those locations' overbearing sun exposures during the summer, or even year round. Some fireproofing insulation comes built in with RFI; these products though are only found in roofing insulations, and less so with room to room insulating materials and products. Foam board insulation does not typically carry any RFI features, while mineral wool insulation never carries any RFI features.

Where can RFI be installed?

RFI is typically installed in and during roofing projects. Again, the objective is to place your RFI where the building will be seeing the most sun-or any sun for that matter. If you're on a tight budget, you really should not skimp on RFI, though. It's difficult to undo or redo, and when you get insured, you incorporated such features as RFI into your risk profile-ie your insurance agent will ask you if you have RFI installed, and where you have it installed. Same goes for tax credits related to energy savings, so called green initiatives, and sustainability programs in your area.

RFI is usually installed toward the top of your house, but your sun exposure is unique to your building, and should be analyzed and respected on a case by case basis. Your foundation, as unusual as it might be, could be a point of high sun exposure. You might have a sun or moonlight feature that is an opening at mid ground to your basement. You'll want to check this point for abnormally high sun exposure, especially if it's on the side of the property that bears the brunt of the morning or setting, or worse, lunch time sunlight.

When can RFI be installed?

RFI is installed when the property project is completed; it's typically installed soon after the frame of the project and building is completed, when there's a roof to speak of, and an insulating room to protect the exposed insulation material from the elements. The timing of RFI installation is key, since it's very difficult to go back and correct poorly timed RFI pieces-especially if the roofing project is one that's intricate, detailed, or unconventional.

RFI is a great tool to use, if you're missing in space, or if you're in an industrial space that does not allow for very many of the conventional insulating materials that aim to absorb. They're also great for outdoor use, where humidity and rains can spoil absorption based insulating materials, such as wool insulation. The general rule is that if your property and building project is over 1,000 square feet, you'll not want to do this project on your own, but rather have a professional contractor do this for you.

Choosing Between Timber Or Steel Frames and Trusses

When choosing between timber or steel frames and trusses for your kit home, there are several considerations to keep in mind. These considerations involve many factors such as the location of your kit home, the exposure to certain environmental and climatic conditions, and your budget. But whether you choose timber or steel, you can be assured you are buying a quality home to meet your family needs.

Do not Pester Me

Choosing between timber or steel frames sometimes comes down to considering the pests where you will be building. Termite damage in Australian homes costs home owners millions of dollars every year in repairs. A steel framed and trussed kit home provides extra protection against termites. There's not a termite in the world that can eat its way through steel! If you live in an area with termites, steel is the best choice for your home construction.

It should be stated that the framing for wood and steel is very similar. The differences are quite few. Steel does not have to settle like wood. That means steel framing is ideal for locations where there is a lot of moisture. Unlike wood, steel will not expand and contract when exposed to different moisture depths in the air. Although the wood used in kit homes is of high quality and always properly treated and sealed, wood is sensitive to moisture. A steel frame never has the possibility of warping, shrinking, splitting or twisting due to moisture.

I Can Handle That

Many people choose to build their own kit homes in order to reduce labor costs. Steel frames are already punch holed, weigh less and do not need to be chemically treated like wood. Owners who decide to build their own kit homes find these features important, because they make the job simpler all around.

One of the big advantages of steel construction is the fact steel beams are not as heavy as wood timbers. Yet steel is stronger than wood even though it weighs less. When you live in an area with high winds, steel framing and trusses provide extra protection against the weather.

Steel is also recommended for areas which are subject to frequent wild fires or are built in areas where the fire threat is high. A wood home is much more likely to catch on fire quickly, and once on fire, the damage is intensive. Steel framed home are better able to withstand fire threats and will sustain less damage than wood framed homes.

Another reason why steel frames and trusses may be desirable over wood in a particular home is the fact steel can span a longer distance than wood. When you custom design your home as an open floor plan, you may need to choose steel over wood to meet construction standards.

Do not Forget Wood

Complete all the advantages of using steel for framing and trusses, houses built with wood have pluses also. Wood costs less than steel so when termites or extreme weather are not problems, wood is a good choice. Wood is a versatile material for construction purposes also. You can easily adapt design any floor plan or house style using wood.

Choosing between timber or steel frames and trusses for your kit home requires an assessment of the environmental features of the area in which you will be building. But the one thing you can be sure of ….. the steel and wood kit home will be well built and enduring.

The Contemporary Electric Fireplace

When buying electric fire places, the first question that comes to most consumers mind is what a contemporary electric fireplace. The phrase means that the fire place is not the standard hearth style fireplace. This is not a fireplace that you would stick in a rustic cabin next to a pot belly stove. On the contrary, this is a fireplace that would add heat, light, ambiance, and comfort to a more modern clean lined decor. When a customer is looking for a fireplace that will not take up a lot of space, can be mounted, can give off an air of civility, affluence, and also warm their house, they are looking for a fireplace that would be described as a contemporary one.

These fireplaces come with a number of features to them. They can be vented into the room for the warmth and coziness, or they can be vented into an installed ventilation system. This gives the customer the ability to either use it as a practical climate control, or a conversational show piece. The fact that there is a fireplace will spark a number of conversations. The fact that you can not feel the heat, and you could with a turn of the switch will be the talk of all of your guests. Not only that, these fireplaces can be mated and framed to a variety of styles and colors. This makes sure that your fireplace will go with any decor you have, including matching your furniture or paint.

Using Landscaping Timber to Create Flowerbeds

You can create terraced flowerbeds simply by using landscaping timber. Terraces are great because if you raise a flowerbed the soil will be able to grow plants sooner and they will not need as much water. What is more, raised flowerbeds make it easier to maintain and care for, while they will also save space if you have a small yard.

There are several uses for raised flowerbeds made out of timber. You can use them to give your landscaping design a warm look. You can also use them to make a ready made garden. Use some compost and topsoil, plant some carrots, taproot, radishes, parsnips and anything you can think of. In fact, you can even create a wheelchair friendly garden if you put the beds high enough.

Plan your design

You can use landscaping timbers in every way you can imagine. There's a large variety of timbers nowdays, and you can even buy some pieces in the shape of small logs but with a flat bottom, making it easier to place it. Although they look very natural, in fact, they are made of plywood, so they are a recycled product. However, there are people who prefer to cut the timber themselves, or to buy real landscaping timbers.

Real wood landscaping timber is not chemically treated, while plywood is. Therefore, real wood timber can last just for seven or eight years but they are safer and healthier, especially if there are children at home. Plywood logs are treated with more chemicals to last longer.

Planning is essential for creating raised flowerbeds with landscaping timber. First, see how high you want it, and then calculate how much timber you'll need. Remember you'll need four timbers per level, two long and two short, to make a frame. You will need another layer of timber to sink into the ground, especially if it's too high. After you have planned and sketched your timber flowerbed, calculate if the timbers at your store are the size you need or if you'll need to cut them to the size you have calculated.

Building your timber flowerbed

After you buy the landscaping timbers, remove the grass and level the ground. A good idea is to dig a surrounding trench, so it's easier for you to install the first layer of wood. You'll need landscaping nails to fix the timber so it will not move. As you go up, do not forget to put more nails every two or three layers. If you plan to build more than one you can do it in just one day.

Window Security Locks: Your First Defense Against Burglary

Window security locks are your first defense against burglary. Today, you have to ensure that your home and / or business is safe from intruders, probably more than ever before. The economy is weak and so, crime is up. This said, criminals will try to break into your home or business through its easiest means-windows. It only makes sense that your locks should be as strong as possible.

Read on to learn how you can make sure your existing window security locks are up to par, and if not, how to find ones that will really defend your home or business against intrusion.

Inspect Your Windows

The first step in making sure your windows are as secure against burglary as possible is to inspect your window. Are they cracked or are the locks rusted or worn? Is the wood around the window solid and not rotting? All of these variables are key in determining the safety of your home and whether or not to upgrade your window security.

Inspect Your Window Locks

There is often a huge difference between the window locks that were installed when your house was manufactured and the products reported to as "window locks security". Unless you have installed new windows recently, and asked for highly secure window locks, you are likely to just have locks that lock your window in place. These are not enough to discourage an intruder. For ultimate window locks security, your locks should have made heavy duty or something comparable, large so the prospective intruder can see them, and possibly key operated.

Security Locks Window Options

Depending on how elaborate you want to get with your window home security, you could choose to enlist a security company or stop down to your local hardware store to purchase and install your own locks. In either even, you should know the basic kinds of security locks for window security that exist. The most effective for preventing window entry are:

  1. Fanlight Locks: these locks are often metal and have a bolted latch for opening and closing the window.
  2. Key Operated Locks: these types of locks are as you might expect-operated to lock by key access. If you choose this option, make sure that you store your key in a secure place-since this security requires two step precaution.

Other Options to Consider

While window locks window security is a great start to your home or business' safety, you should also be considering other options to fully bolster your home's security, and secure you and your family from intrusion. Two other great ways to stop the intruder in his / her tracks are window bars / grille / gates and window security film. The former are often tamper-resistant bars placed on the outside of your window, so that even if they break your window, they can not get through the bars or gate. The latter is a thin, clear, heavy duty plastic shield placed on the pane itself, which introduces your window from shattering or breaking, so that an intruder can not enter through the window. These are good options to consider when purchasing window security locks, as add-ons.

Polystyrene Insulation – Foam Board Insulation

Foam Board Insulation is based on covering indoor or outdoor surfaces of building in order to prevent heat losses to the surrounding.

There are several material used for the production of these foam core boards, of which Polystyrene is the most widely used.

Polystyrene is an aromatic polymer made from styrene monomer. Polystyrene is among the most used types of plastic for general use. Chemically, polystyrene is a long-chain hydrocarbon, with every other carbon molecule connected to a phenyl group. Discovered in 1839, polystyrene became ubiquitous, being used in the production of a variety of objects both for general and industrial use.

Polystyrene, in its foam form proved to be a very good thermal insulator and damping material. This quality made it well suited for the production of foam core boards used in foam board insulation, and also for the construction of non-weight bearing structures.

The foam boards made from polystyrene foam are of two main types, differenting by manufacturing process and by the properties they exhibit.

The one most widely used form of polystyrene foam core board is Molded Expanded Polystyrene.

Molded Expanded Polystyrene is a closed-cell material, which, molded in desired shapes is used for making various items. The most common use of Molded Expanded Polystyrene is packaging material, taking advantage of its excellent damping qualities.

Making foam boards from MEPS, implying mixing unexpanded polystyrene beads with a blowing agent and pouring the mixture into a container which is heated to allow the beads to expand. The expanded beads are injected into a pressurized mold, transforming them to foam. The foam is then shaped to make the boards, which is used for the foam board insulation.

The second type of boards is those made from Extruded Expanded Polystyrene, or XEPS. While similar to MEPS, XEPS is made by liquefying polystyrene pellets mixed with several chemicals and then adding a blowing agent which forms gas bubbles. This thick liquid is then extruded trough a die, and after cooling is cut and shaped as needed.

A Review of the Revival RG-26M Acoustic Guitar

One of Revival Acoustics more popular guitars is the RG-26M an OM / OO size / shaped acoustic guitar. If you appreciate the quick response and unique sound that mahogany gives and appreciates good tone with added volume and punch; then the Revival RG-26M may be just the ticket for you!

As a dealer for Revival Acoustics, I had heard good things about this particular model, one of my incentivies for stocking this guitar was that I had ordered the RG-26 with the spruce top and liked it!

The RG-26M has an even more reasonable price tag! After making numerous attempts to purchase the RG-26M guitar from my supplier (because they continued to sell out of them so quickly) I finally got my hands on two and began to compare them! I'll admit that I'm a bit biased, in that I do like the sound that mahogany / guitars make; having said that, playing these guitar's for me was a satisfying experience! It is also important to note that size / shape matters here as well and there is a big difference between playing a dreadnought size / body guitar and wrapping arms arms around an OM with thinner sides; none one has long arms; it just feels more comfortable! The OM body is still versatile enough for flat-picking and excel's at finger style approach's like! This guitar features a 1 & 11 / 16th's nut width and works well for people with smaller hands, obviously it does not have the power and depth of a dreadnought, but it can squeeze out a lot of sound which should satisfy most people and it has a uniqueness that is all it's own!

There's Something about the way she Woo's me, this guitar is simple, no nonsense and straight forward, in that it's uniform (basically all the same material / wood goes into building it). Simplicity has a beauty all it's own and though mahogany may not be exquisite like Koa wood it's distinct and rich in color, style and tonality! What you see is what you get here, this may sound redundant, but when you play an all mahogany guitar you get an all mahogany sound, not the sound of a combination of woods like the Sitka spruce topped mahogany back and sides RG-26 ( see the Guitar Player Review on the articles page of my website) Both of the tops on the RG-26M guitars I received had a reasonable amount of what I call character; which I felt made them unique / pleased in there own right; despite being green, (right out of the box) both of these hogs performed well and whenever I am reluctant to put any guitar down, that's a very good sign to me, and not only that, but when I continue to pick them up to play them and continue to be satisfied by them time and time again!

There is nothing fancy here, but I think this model does really show off the abalone rosette well, which to me looks like a jeweled necklace and looks great against the dark mahogany top wood! The finish is all satin / matte and this gives the guitar a real nice natural feel and an overall rustic appearance! I also believe that a satin finish helps this guitar breath out more sound better than a gloss / poly coat would and it just fits so well with this particular model! If there we're something's I would change about this guitar, it would be the width of the neck, I would personally prefer to have a 1 n nut width. I would probably swap out the Grover mini Romatic's and replace them with open gear tuners for a more vintage vibe and because I find the mini knobs small for my hands to maneuver.

The specification's of the RG-26M are the same as the RG-26 guitar, with the only exceptions being the hog top, the satin finish and the headstock inlay; which has Revival inscribed on it in abalone vs. the tree of life Revival logo which is done in pearloid on the RG- 26. The Revival RG-26M is a very affordable solid wood acoustic guitar providing a lot of sound and bite for the money, an if your looking for an all solid mahogany OM sized acoustic guitar you will be hard pressed to do better!

Fake Fireplaces

It is the dream of many to make their homes look classic and elegant. Fireplaces are known to add to the look and beauty of any room, while adding to the property value of the house. However, they are usually very expensive and cost a fortune when opting for the real granite or marble fireplace. The fake fireplaces are the best option to meet pre-determined budgets and enhance the beauty of the room.

Fireplaces not only provide warmth and coziness to the room, but also provide a place for displaying ornaments and other decorative accessories on the mantelpiece. It adds to the distinct feature of the room. In order to fulfill the purpose, within a budget, people opt for fake fireplaces.

Several do-it-yourself kits are available in the market to guide the homeowners in designing and building up their own designer fireplaces. While opting for fake fireplaces owners must consider the size, shape and placement of the fireplace, according to the room space and other furniture. Materials for setting up fake fireplaces are also easily available and give the desired finish and look. These include plywood, cardboard, PVA glue, screws, nails, hammers, wallpaper, rags, paintbrushes, paint rollers, quality acrylic primer, pencils and rulers, newspapers, masking tape, plastic plates for mixing paint and colors and sea sponges, to name a few.

All these materials are used to build the fireplace, following the instructions and guidelines. Fake fireplaces can be built during the Christmas week, to celebrate the occasion and enjoy the presence of a fire and the cinders in the fireplace. Various online sites offer guidelines and video demonstrations to build fake fireplaces. Individuals can also take the help of professionals to guide them. These additions to the home are always welcome and enhance the interiors with a touch of class.

The Many Uses For Ground Penetrating Radar Services

While there are alternatives to using ground penetrating radar services, they are not generally as thorough and non-invasive. When it comes to finding out what is under the surface of any tract of land that may be built on or dug up for whatever reason, this radar has the unique ability to find what other methods may miss.

Your Old Maps Are not Enough

What about old survey maps, building blueprints or schematics? Do not these show where everything is? Not always, since home owners, or owners of any building, may have done work that is not on the maps or blueprints. There is also the possibility that work had been done on the land before the records were kept. Things change, and not everyone records the changes, so there may be underground issues you will need to be aware of.

• Old septic and sewer lines no longer in use may exist without your knowledge. These were supposed to either be removed or filled with gravel to avoid a cave in as the tank corrodes. Not everyone followed those regulations and you will not want to lay a slab for any structure to have it collapse when something underground gives way.

• Abandoned wells were usually capped off, but there is no way to know where they are without someone recorded the location. These can be hazardous, not only to a potential building project but for anyone walking in the area that is not aware of the possible danger.

• Underground pipes and cables may not be accurately represented on maps and surveys. So before any digging commences, it is a good idea to use ground penetrating radar services to locate any potential dangers lurking under the surface.

• Caverns, voids, water tables, and even soil type can be seen using radar. And this information can be invaluable when it comes to commercial building projects. Different soil types can generally call for a modification in the building to be raised or the materials that will be used.

While X-ray is considered to be a good alternative to ground penetrating radar, the only way it can be as effective is if the X-ray is taken from both top and bottom, which really negates the whole point of using it. Radar uses high frequency sound waves, which can be read with specialized equipment. In layman's terms, the sound waves bounce off objects in the ground in a pattern to determine size and shape, and depending on the density of the soil, the sound travels at different rates. This is how the subsoil type can be determined, based on the information received.

The future of any construction project can depend very much on the type of sub soil that exists, since drain and stability are important factors. Major projects always test the sub soil for any potential problems, since excessive drainage can lead to erosion of the soil right out of under a poorly slab foundation, underlining the entire structure. This is yet another of the many reasons ground penetrating radar services are utilized before a project begins.

How To Get Your Foot In The Door At A Modeling Agency

Breaking into the modeling business starts by gaining entrance into the heart of the industry – your friendly neighborhood modeling agency. But what's the best way to get your foot in the door? Every aspiring model has a different method for success, but here's a quick look at the top ways you can get noticed by modeling agencies large and small, local and worldwide.

The Dry Call

The adage "there's safety in numbers" may apply to many walks of life, but modeling is not one of them. When you send your heads shots into an agency unsolicited, you are joining the thousands of other aspiring models who have chosen the same point of entry. The potential problem with the dry call is that no matter how great you look, your head shot is likely to get lost in the shuffle. And that shuffle is likely being overseen by the overworked, cynical intern – not the dream-maker who sits in the corner office of the agency. While there ARE dry call success stories, do not expect a call 3-5 business days after your head shots hit the mail.

Pros: Cost-effective, allows you blank many agencies at once, you're limited only by your postage budget.

Cons: The volume of dry calls a modeling agency receives in a given day makes it hard to stand out from the crowd.

The Walk In

Nothing says, "I'm ready to work" like showing up at a modeling agency is glorious 3-D. Walk In appointments give you a chance to show your portfolio to booking agents, be interviewed and just generally strut your stuff. Walk-ins must be scheduled in advance over the phone. When you arrive at the agency, always be professionally trained and maintain a positive mental attitude. This is your chance to shine beyond your photos – take full advantage of it.

Pros: A one-on-one opportunity to make an impression on modeling professionals. Unlike the open call, you probably will not have to wait in line with hundreds of other respondents.

Cons: Much like the dry call, you can never be sure that the results of the walk in will not end up in the world's largest backroom filing cabinet. Still, the fact that the agency has had a chance to see you in person and experience your personality gives you a leg up!

The Open Call

Firmly planting yourself into the good graces of a modeling agency means being there when they want you (and not just when you decided it was a good time to drop them a line). And that is where the open call comes into play. An open call reflects to that special time when an agency places an ad looking for talent. The process is simple: you show up – they love you – you become famous! OK, maybe it's not that simple, but the open call generally produces the most success because you as a model are filling a need at the agency. When you do a dry call or a walk in, you may be great, but there's no way to gauge the hiring climate at the agency. With an open call, you're there because they want you there!

Pros: The open call is a signal that the agency in question is looking for new talent. There's no better time to get your foot in the door.

Cons: You're not going to be the only one who reads the modeling agency's ad. Be prepared to spend a large portion of the day waiting to be seen by the right people.

(C) Copyright – Coach Models – Jochen Talmon

It is a Log Home? A Timber Frame Home? Hybrid Log & Timber Homes – The New Industry Trend

Over the past few years, the log and timber home industry has taken a new turn. Today the industry sees more and more homes combining log elements with timber frame components and conventional framing.

Employing a combination of materials and building styles is referred to as "hybrid" and is often done to achieve a particular design look. Many clients enjoy the flexibility in design that a hybrid style home allows. Below are a few examples illustrating how a combination of different materials can come together to create a truly amazing home:

Crested Butte – A hybrid log home design of large stone, milled log walls, and customized timber frame trusses.

Eagle's Nest – A hybrid log & timber home; square milled log walls with dovetail corners and custom timber frame trusses.

Upland Retreat – A handcrafted log & timber hybrid home; handcrafted wall logs and timber frame trusses, posts & roof.

Many designers will use timber and log elements in combination with conventional framing. Of course, the log & timber home purist prefers a more authentic log and timber style construction. But, decorative log and timber elements added to conventional framing can achieve a mountain flavor and sometimes save costs. This hybrid method is seen regularly in multi-unit condominiums and resort townhouses. Framing side wings in combination with a timber frame or log great room makes sense and can save in construction costs.

Log construction, however, can be very difficult to combine with other types of construction if the log home company does not utilize a non-settling system. If your goal is to decrease the cost to build your log home by mixing logs with framing or post & beam construction, remember to check out the company's non-settling system.

With any home design, the creativity of the designer will dictate the materials to be used. Find a company that is flexible in their manufacturing so as to accommodate the creativity of your design. Providing your designer with a broad palette of materials including log, timber, framing, glass, stone, steel and other materials creates more opportunity for a unique and creative custom home. The design must come first and the materials must then be able to accommodate.

Get more log home information by visiting PrecisionCraft Log Homes or learn more about the log home industry at The Log Home Blog .

Flying With Your Baby Stroller – 10 Easy Tips For Boarding a Plane With Your Stroller

For many parents the idea of ​​traveling with an infant or toddler can be overwhelming to say the least. The amount of necessary items for the comfort and safety of a child must always be considered before you go. One of the most common dilemma's when flying with a child is whether or not to bring along your baby stroller.

A baby stroller can be a big help on a trip that will entail a good deal of walking or transporting a young child. However, be sure to remember to check out whenever or not your destination will be stroller-friendly along the way.

Here are 10 tips for flying with a baby stroller.

1. Make an educated decision about bringing a baby stroller. First check with your airline for their policies on bringing along a baby stroller. This may determine whether or not you will consider it a hassle or an asset for your trip.

2. Know the area you will be walking around. Consider the terrain, the width of the aisles and doorways as well as the amount of stairs you may be subject to climb. Pushing a stroller on a bumpy stone path or transporting it between subway rides may well be more difficult than simply carrying your child.

3. Before you even get to the airport be sure to properly label your stroller (on the handle bar or side bars) with a permanent marker or paper label. Write down your contact information, destination and flight information. You will be given a tag when you check your stroller but it is better to use BOTH to insure you get your stroller back once you have landed.

4. Have a Plan B for those times when you will need to leave your stroller outside or in the trunk. For babies that weigh no more than 20/30 lbs. keeping a baby carrier, sling or backpack is a good second option. For older children who can walk themselves, consider a harness to keep them tied to you in crowds and strange places. If you do not like the idea of ​​a harness for your child just be sure to start explaining to them a little every day about the importance of staying next to you or other caregivers when you are in a different place. They should understand who it is safe to talk to and give them something that has your contact information to wear when you are out in public.

OK Now you are ready to head to the airport!

5. It will be easiest to employ your stroller through the airport and just check it at the gate of the plane. Most airlines will let you stroll right on up to the gate of the plane before having to check it in.

6. If you would like to count your stroller with your luggage at check-in be sure to find out if you will be charged an extra fee. Some airlines do not count a baby stroller as a part of the luggage you are allowed to bring on and may have a rate that you do not want to pay.

7. If you are loading at the gate you will be asked to remove your child yourself and fold the stroller down to be stored. (It is nice to have a helping hand available to hold your child (ren) during this part.) Bringing duct tape is a good idea if your stroller is not compact enough to store in the overhead compartment on the plane. Simply tape the sides of the stroller shut tightly or wrap the stroller entirely around it's center. This will help to keep it closed while it is being loaded and unloaded into the cargo area therefore minimizing possible damage.

8. Your stroller will then be tagged and given a corresponding receipt that you will need to hold on to, in order to retrieve your stroller once you land.

9. Be sure to confirm with the attendant at the gate check where you will pick up your stroller upon landing. Most airlines will return your stroller at the gate as you exit but it could be sent along with the other luggage to the baggage claim.

10. Upon your exit present your receipt to claim your stroller or head to the baggage claim to retrieve it there. Remember to take advantage of your stroller and load it down with whatever baggage you can to alleviate the strain on your arms and shoulders.

It is important to note that if you are bringing a light umbrella stroller that can be folded compactly enough to fit into your overhead carrier (find out the dimensions from the airline) you will not need to gate check your stroller. Simply fold it and carry it to your seat. There are certain things you may want to consider before choosing between your lightweight, .standard stroller and your heavier, fancier stroller. Here is a list of pro's and con's for both.

Basic Umbrella Stroller- Between 10-13 lbs.

Pro's:

  • Compact, easy to fold and store.
  • Lightweight and easier to carry if you have to.
  • Can likely be stored in overhead of airplane so there is less opportunity for damage during the flight.
  • Cheaper to replace should you have any damage.
  • Easier fit through standard doorways, aisles, sidewalks and stairs.

Con's:

  • Not much storage to hold bags, or toys or anything acquired during an outing.
  • Not as easily maneuvered on rocky or difficult roads or terrain.

The BIG Stroller- The One With All the Fixin's!

Pro's:

  • Good amount of storage for diaper bags, purses and shopping bags.
  • Usually has a canopy and plenty of accessories to entertain and protect from the sun or rain.
  • Much easier to maneuver due to the larger wheels and design.
  • May be compatible with the car seat you are using or renting, therefore making a complete travel system.

Con's:

  • Takes up more space in trunks on sidewalks or buses.
  • Heavier to carry.
  • Needs to be stored with luggage on plane.

Based on this list you should pick the stroller that you feel will serve you and your child the best. There is nothing like having a stroller to help out when it comes to toting your children. A stroller is the next most important item to the crib when it comes to having a baby.