The Truth About Permanent Cosmetic Makeup Eyeliner, Lip Liner, and Eyebrow Tattoos

I've had cosmetic makeup procedures done in many parts of the world at many clinics and for many different reasons. All have been successful and I am pleased with the results; the ease of applying less makeup, waking up to beautiful brows and perfect eyeliner and softly colored lips. I also love going for a swim and coming out looking like I never got my face wet, at least there's no runny eyebrow pencil, no black smudges of liner under my eyes and no dull. lifeless lips. That's my experience, so naturally I've been recommending permanent makeup for a long time. But the truth is that tattooing any part of your face is a serious matter, and it's definitely NOT for everyone!

My adventure with persistent makeup began in Asia, therefore I had some of the best cosmeticians attend me at a clinic in Hong Kong. Later in Taipei, I had my eyeliner retouched a few months before I was married, so my honeymoon on secluded beaches of Macau was free of makeup worries. However, through my travels as a cultural journalist, during almost 10 years in Asia, I also saw numerous ladies who cosmetic tattoo eyesbrows were a total disaster, mostly because the shape and the arch of the brow was overly pronounced, or because the tattoo had been done on an area above the natural brow, or so unnatural looking due to having the brow line tattooed in a solid inky stain on the skin and not a natural feathery application within some existing hair.

This seemed to have been the result of women getting eyebrow tattoos after having completely removed their natural brow hair, either through electrolysis or some other hair removal system. Most of these "not very flattering" eyebrow results were on women who lived in smaller villages and isolated regions where newer tattooing techniques were not yet began to be applied, and where black was the only one that was used to create dragons on the shoulders and backs of men was also used on lady's brows. But the newest methods, which are used in international clinics, allow for a wide choice of pigments, including blending colors to get very natural shades that match even fair hair colors.

But who should get cosmetic tattoos and who should not? The truth is that if a lady has no brows due due to an illness that has contributed to hair loss, a tattoo is an excellent solution, especially if the feathering techniques is used. What this means is that tiny strokes of pigment are applied to the brow region to look like hair, not a solid line. Women who have very sparse brow hair should also consider adding a bit of dimension with this same technique, and in this case, the technician will follow the natural brow. Women who should not consider these procedures are those who have poor natural healing abilities, who bleed profusely, who scar easily or have extremely sensitive skin.

If you're unsure about getting eyebrows tattooed, since this procedure alters the look of the eye in a very noticeable way, then start with something smaller like a bit of eyeliner. Have your technician tattoo a fine outline in the lash line and see how your skin reacts to the pigment. If all is well, go ahead with the brows.

Coping With Foundation Creep on a Sloping Site

Foundation creep is a common type of foundation damage found in houses built on sloping sites. With this kind of damage, a foundation element (wall, footing, slab or pier) can begin to move downhill in response to gravitational forces, soil pressure and other factors. Since foundation elements are usually tied together with a combination of steel reinforcement, continuous masonry or framing; multiple elements can be affected when one element shifts.

If not addressed, foundation creep is likely to worsen over time. Homeowners who occupy sloping sites are well-advised to contact a foundation repair specialist if they notice foundation damage. When proper repairs are done in a timely fashion, high repair costs and more perilous foundation damage can be avoided.

Sloping Sites Present Problems

Contractors prefer to build a house on a flat, open site, but they don’t always get their way. Sloping sites are often developed because flat sites are no longer available. They can also be chosen because of attractive views and other features like rock outcroppings to create special appeal. Regardless of the reason for developing a sloping site, property owners have reason to be concerned when soil creep causes foundation damage.

A number of forces and factors are usually involved when soil creep occurs. Most obviously, gravitational force causes soil pressure to increase as the slope grows steeper. Vegetation usually helps to stabilize a steep slope, because plant roots consolidate the soil and also help to absorb excess moisture. However, vegetation also adds weight to the soil. It can increase downward pressure on a foundation if most of the roots are above the slip plane where soil movement is most likely to occur.

A discussion of soil movement usually involves water. Soil stability is enhanced by certain moisture content– in the same way that damp sand can be molded to create a solid form. However, adding more water to a sand sculpture will cause it to crumble and wash away. Soil can behave in similar fashion. On a sloping site, the pull of gravity begins to effect soil when a certain level of moisture saturation is attained.

Foundation creep can also be caused by clay-rich soil that expands naturally as it absorbs moisture. This type of soil pressure often damages foundations on flat sites. On a sloping site, soil expansion typically causes a downhill push against the foundation.

Tiebacks and Tiebeams Solve Foundation Problems

A foundation repair contractor is the best professional to diagnose and repair foundation creep on a sloping site. Helical tiebacks and tiebeams are possible solutions to stop the creep and restore stability to the foundation.

A helical tieback is a steel anchor equipped with helical plates that allow technicians to drive the anchor into the soil like a giant screw. A series of these anchors are typically driven through the foundation wall on the uphill side of the house, and deep into the soil. Such an installation effectively pins the upper foundation wall into the slope. The same repair technique is used to stabilize and restore retaining walls that are tilting due to soil pressure.

Since it’s usually the foundation wall on the downhill side of the house that is creeping downward, the repair strategy often involves installing beams to connect the stable uphill wall with the downhill wall. The combination of tiebacks and tiebeams is a commonly used repair strategy. However, the foundation specialist is likely to suggest other remedial work to help control drainage so that the soil around the house doesn’t get too heavy or too saturated.

Timber Carports Protect and Free Up Storage Space

Timber Car Ports – your professionally good looking, value adding, answer to improving your home's weather protection and releasing your garage to provide essential storage space, extra rooms, granny flat, exercise room, or home office, etc.

Easy to Build with Professional Good Looks Timber car ports – the solution you've been looking for!

That's right!

Planning for a Car Port

Because car ports are considered to be 'temporary structures', they very often do not need planning approval. It's the same for some 'kit' or ready-made garages. Neverheless there are a number of other regulations you will need to observe. For instance if the building will be closer than the front of the house to the road.

You must also observe building regulations, where these apply. For instance making sure that your building is a minimum of 1 meter away from the boundary '.

While generally building regulations may not be applicable for detached single storey buildings that are over a metric from the boundary, if they have at least 2 sides open on and a floor area of ​​less than 30 square meters, you may not need building regulations approval for a car port.

So, easy to design, plan and build, these cost effective professional timber structures add value to your property at first glance.

Storage Shortage

It is well known that Britain's homes are some of the smallest in Europe. Most have a severe lack of essential storage space. As a result many people now use their garage as a 'lock-up' store. Yet more have converted them to a home office, extra bedroom, 'granny flat', or garden exercise or recreation room.

Rain & Snow

With more and more cars being left parked in the drive, loading or unloading the kids, shopping, sports and short holiday break goods are increasingly affected by Britain's worsening weather. Rain … and more rain, seems to be the long term weather forecast for our summers, with occasional feet of snow in the winter.

So, cars and people need the convenient protection that garages used to provide, but which UK homes now lack.

The 'Look Good' Factor

Timber car ports are increasing dramatically seen as the solution.

They can provide the protection you need, while at the same time looking good so as to preserve and enhance the value of your home

UK Planning Regulations

Now that the UK's town and country planning rules have been changed, in many cases you may not have to go through the rigmarole of employing architectural designers and engineers to get permissions before you can build.

Timber Car Port Solutions

Whether you prefer a fully architecturally designed independent solution to your requirements, or a simple to erect, standard 'Kit' package that enables most competent DIY'ers to achieve professional looking results with few, if any, problems, a Timber framed car port is most probably your best solution.

Why Choose Mahogany?

Mahogany has been one of the wood types used in the production process of some of the finest and most expensive furniture items ever. If you are not sure that my statement is correct, all you have to do is a quick search on the Internet regarding some mahogany antique furniture, and you will be amazed at the beauty of this furniture type. This is the article where we talk about the advantages of mahogany as a material to have incorporated in your house hold, and why you should go for it.

The first advantage of mahogany as a wood is durability. There are dining table made from mahogany that are 400 years old and can be found in museums around the world. The wood is naturally resistant, and can withstand the harness of time for many, many years. There are sure chances, that if you buy a true mahogany table, it may last longer than you are your kids also. Red mahogany has even one greater advantage in comparison to normal mahogany, and that is the fact that it is resistant to termites. How is it possible for wood to be resistant to a natural wood eater? I have no clue, I just know it is possible, and due to the amazing properties this type of mahogany has to offer, red mahogany wood flooring is becoming a preferred choice among house owners.

Mahogany has a natural tendency to blend into any type of home. Normally, mahogany is used as a traditional material, and is mainly focused on in the manufacturing process of antique dining tables, and other furniture pieces, which were mainly used in the Victorian era. However it also has the ability to blend in with other furniture types and acts like a wooden chameleon inside your house. The wood type however does have a natural beauty and elegance to it, and this is the main reason why it has been used for so many years inside the houses of some of the most famous figures of the world.

In recent uses, mahogany serves as an optional material inside some luxury cars, being mounted on the doors, the dashboard, and sometimes even the steering wheel of the car. If you think this option will cost you a lot, you are correct, as these extra option will cost you around three to four thousand dollars more added to the price of the car.

So why choose mahogany? Because it is strong, beautiful, elegant, classy and long lasting.

Tips on Building a Quality Wooden Poker Chip Case

So you have decided to invest in a poker chip case to store all of your poker chips. Before you get started, whether building the case yourself, or ordering a custom case from a third party, there are some things to consider that differentiate a quality poker chip case from just a plain wooden box.

JOINTS

Joinery is a part of woodworking that involves joining together pieces of wood, to create furniture, structures, toys, and other items. The characteristics of wooden joints – strength, flexibility, toughness, etc. – derive from the properties of the joining materials and from how they are used in the joints. Therefore, different joinery techniques are used to meet differing requirements. When designing a poker chip case, you have to take into account the weight of the chips, which can approach 50 lbs for a 1000 chip case. The joints have to be strong, or the case will fall apart under the weight of the chips.

Most pre-made cases bought on the market utilize a butt joint. A butt joint is a joinery technique in which two members are joined by simply butting them together. The butt joint is the simplest joint to make since it merely involves cutting the members to the appropriate length and butting them together. It is also the weakest because unless some form of reinforcement is used, it relies upon glue alone to hold it together. Because the orientation of the members usually present only end grain to long grain gluing surface, the resulting joint is inherently weak.

When building or ordering a custom chip case, you should avoid butt joints and use a something stronger, such as a dovetail joint. A dovetail joint is a joint technique frequently used in fine woodworking joinery. Noted for its resistance to being pulled apart (tensile strength), the dovetail joint is commonly used to join the sides of a drawer to the front. A series of pins cut to extend from the end of one board interlock with a series of tails cut into the end of another board. The pins and tails have a trapezoidal shape. Once glued, a wooden dovetail joint requires no mechanical fasteners.

Another simple and strong joint is the mortise and tenon joint, which has been used for thousands of years by woodworkers around the world to join pieces of wood. This is commonly used when the pieces are at an angle close to 90°. Although there are many variations on the theme, the basic idea is that the end of one of the members is inserted into a hole cut in the other member. The end of the first member is called the tenon, and it is usually narrowed with respect to the rest of the piece. The hole in the second member is called the mortise. The joint may be glued, pinned, or wedged to lock it in place.

HARDWARE

Hardware for a poker chip case must also be durable. A variety of hinges and hardware are available, but you should avoid a stamped hinge, which is the weakest type of hinge. When building or ordering a custom case, there are a variety of hinges you may request.

A full length piano hinge is a long narrow hinge that runs the full length of the two surfaces to which its leaves are joined. This imparts additional strength to the hinge when a heavy solid wood lid is used.

Concealed Hinges are used for furniture doors (with or without self-closing feature, and with or without dampening systems). They are made of 2 parts: One part is the hinge cup and the arm; the other part is the mounting plate. They are also called Euro/cup hinges, and give a cleaner look to the case.

FINISH

One thing to consider when choosing a finish for your wooden chip case, is to be sure to use Polyurethane or a non-soluble varnish that does not stain or seep into your chips. You should avoid any type of Oil finish such as Tung or Danish oil, as these oils can penetrate into clay chips over time.

TRAY SIZE

The majority of poker chips are 39mm in size, however, large denomination chips, as well as chips based on the Paulson Inverted Hat and Cane mold, are 43mm size. Be certain that the chip trays are appropriately sized for the type of chips you have. If ordering a custom chip case, be sure to specify the size of your chips.

So when building or designing a custom wooden poker chip case to store your chips, remember to consider the type of joints, hinges, and finish used in the design of you case.

Mold – A Very Dangerous Carpet Problem

Mold is a very serious and sometimes misunderstood contaminant in houses and other buildings. There are guidelines regarding inspection and treatment of mold in Orange County for all sales, purchases and rentals of any type of property and there is good reason for this. Mold can cause severe health problems and even death to certain individuals as some form of mold are pathogenic and extremely toxic.

Carpeting is a part of almost every home and office and helps to make it a nicer appearance although carpeting applied to concrete floors can trap mold more than other type of material. Mold can also grow under tiles on concrete floors, as well as area rugs. Moisture is the number one cause of mold and you want to be certain that if any large amounts of moisture by way of humidity, spills or flooding occurs that you consult with a local Orange County carpet cleaning specialist that can help you to determine if you do in fact have mold and how to treat it.

In order to stave off any mold from appearing one of the best methods of attacking it would be to pull back all of the carpeting to expose the wet or moist areas and let a fan run continuously in order to dry them completely. If mold has been discovered growing on or underneath the carpeting and padding both will have to be removed for cleaning or possibly replaced, so time is certainly of the essence. If the padding has mildew in it, it will most likely need to be discarded and replaced as it can be almost impossible to remove all of it. Padding is rather low cost in comparison to carpeting, so again, the sooner this is remedied the better!

You value your Orange County home and office and you value the people in them. When thinking about something such as carpeting, which most do not normally give a lot of thought to in their day, you would have hard pressed to come up with safety issues as any type of concern for something that is, in essence, an accessory to make a place look nicer when in fact it most certainly can cause harm if not treated properly. In most cases it would be best if you do not attempt to clean or remove the mold yourself as it can be extremely dangerous to you, your family and anyone entering if not properly attended to.

If you find you want to do the mold removal yourself be sure to pull back all the carpeting and padding to help you ascertain that the entire area is dry and use a chemical such as bleach to clean with. Use gloves and a mask and make sure the area is well ventilated and take numerous breaks outdoors for your benefit. Make sure to water the bleach down so as to not cause damage to any surface areas, as well.

Be sure to consult with a specialized carpet cleaning company for any concern and desires you may have regarding mold to keep yourself, your family and friends and co-workers as comfortable and healthy as you can!

Free Reverse Phone Number Lookup – Back Door For Identity Theft?

Maybe you would like to employ free reverse phone number lookup to discover who is the person behind the phone number that is hanging up on you in the 4 am? Or otherwise you wish to acquire a phone number of a college friend, family member or former partner? Perhaps you have to carry out a credentials check on your employee or even check on someones criminal record.

The hottest private info harvesting technology is free reverse phone number lookup, it is quite easy to use and all you need to do is fill out a plain internet form. By making us of it, you may fill in whatever phone number, it makes no difference whether it is a mobile or regular phone number, and in many cases, you will get some kind of info regarding its owner.

It is obvious that mobile phones technology has gone through incredible improvements during the last twenty years. Our parents needed telephone operators, while nowdays we can trace people by combining mobile phones with global positioning technology.

On the other hand, such simple access to individual info makes the future technological advances terrifying. However, this might be a bit of exaggeration as we reflect on the future. Naturally, the possibility to get a hold of personal info from mobile phones is gradually driving us towards the time when usage and possession of such technologies will have to be strictly controlled and limited.

In the recent years many people have started to be increasing concern with the risk of identity theft and many of us are taking precautions to stop the crooks from using such services for seizing individual info.

For the most part all Governments around the world, or in any case the ones in democratic countries, have quite firm privacy rights regulations and as a global leader, it is not surprising that the US government also has quite a few privacy regulations that safeguard privacy rights. But without meticulous control, it could get out of hand.

Moreover, the more we guard ourselves against the misuse of services similar to free reverse phone number lookup, the more useful these technologies end up to be for normal, honest people and businesses.

We do not have to be scared of technology alone, allventions to these days have the possibility for either bad or good. You need to make an effort to be more cautious concerning your individual info and then free reverse phone number lookup will end being a hazard and start to be your personal asset.

Advice on Buying Antique Entry Doors

If you ever hear mention of salvage doors or reclamation doors, those are in reference to antique entry doors turned back to the 1715's to 1830's. 28 counts of imperial bricks made up the common door height up until the 1950's when they were replaced by metric bricks. Antique homes are harder to restore using a standard size contemporary door because it will not be the correct fit and then require a custom built frame. Old wooden doors also add elegance and history to streamlined modern homes.

1715's to 1830's Georgian and Regency homes had simple architecture, with stone work limited to upscale properties. A fanlight was the one embellishment common in these bare-looking antique entry doors with six non-glass panels. 1900's to 1920's Edwardian homes were the first to consume more space, with oversized doorways flanked by sidelites and decorated with art nouveau or neo-Georgian glass panels. Steps were built of either stone or thin metal. Fewer households employed house maids, resulting in the plain black covered, forged iron door handles.

Between the above mentioned periods, much celebrated 1830's to 1900's Victorian residences reflected the era of penchant for adornment. Hallways and entranceways were narrows from Edwardian but decked out with brass work on knives and hardware as much as for sitting room and bedroom furniture. Classic Victorian entry doors each consist of four or six glazed panels, with stained glass in grander homes. A dropped letter box is located at the bottom of the upper half, where it is not reachable by a stray dog, so the lower half usually ends up being shorter.

1920's traditional hardwood doors made use of heavy oak or mahogany, decorative glass panels and sidelights, wrought iron door furniture. Many modern homes hark back to those meticulously detailed colonial doors. 1930's moderne doors rated geometric glass panels, like sun rays or chevron patterns, either mirrored or colored. With chrome finishing easing out iron work, their vintage Hollywood appeal added glamor to antique entry doors. French windows with a grille embedded between double glass panes or layered over a single glass pane, including true divided lite French doors, are also popular choices.

The Character Dolls Of Kenner Parker Toys

Founded by three brothers in 1947, the Kenner Company produced several popular toys such as their popular building and construction toy sets in 1957 called the Girder and Panel, 1959's Give-A-Show projector, and 1963's the Easy-Bake Oven. Then in 1957, the company was acquitted by General Mills which also remarkably merged Kenner Products into its own Rainbow Crafts division wherein its first product after the merger was Play-Doh.

The first few dolls that Kenner produced were the 1972's vinyl Blythe doll which measured 11.5 to 12 inches. The doll came with different changeable hair and eye colors. This doll is one of the thought-after vintage collectibles which can reach several hundred dollars to acquire. Another doll it popularized in the same year was the 18-inch Gabbigale with a battery-operated talker. The doll was made of hard jointed plastic body with vinyl head, painted eyes, and rooted hair.

Still in 1972, Kenner also introduced the 6.5-inch Garden Gals which has a red watering can and then followed by the 18-inch tall Sweet Cookie. In 1973, 16-inch tall Baby Alive was launched which was a battery-operated drink-wet doll. It also introduced Stretch Armstrong which was composed of stretchable vinyl that can stretch as far as four feet and return to its original shape.

By the year 1977, Kenner acquired the license to manufacture action figures for Star Wars with the trilogy running from 1977 through 1985. The action figures measured 3.75 inches and became a standard in the industry that sells action figures. It also began manufacturing other actions figures based on the hit TV series The Six Million Dollar Man. The 13-inch doll characters were Lee Majors, Jamie Sommers, Oscar Goldman, Big Foot, Masketron Robot, Woman Robot, and Steven Austin. It also tried penetrating the toy car die-cast market by launching Fast 111 but it did not gain much of the market's response.

The Kenner dolls became more popular when it created action figures based on DC Comics' superheroes which were included in the series called the Super Powers Collection. Each action figure doll comes with an action feature such as throwing a punch when the doll's legs are squeezed. Other dolls that were also based on books and movies were 1978's Hardy Boys and 1981's Indiana Jones. Doll collectors who are fanatics of television series and movies will certainly appreciate collecting dolls from Kenner. Anyone who also has passion for unique action figures and dolls will find Kenner's battery-operated models amusing.

Work at Home Assembly Jobs

Work at home assembly jobs are all over your local paper and the advertisements show up on the internet everywhere. Although many of the advertisements promise big bucks for your work, you need to look at those advertisements with caution. You need to look closely at work at home assembly jobs before you get taken in by a scam.

Scams are everywhere today. With the advancement of society comes new ways for people to take advantage of one another. Many work at home assembly jobs my be someone just looking to scam you out of your money, yet there are some legitimate work at home assembly jobs out there, too. The risk to you from work at home assembly jobs comes from the upfront money you provide up front for supplies and then the time you put in to do the work.

With legitimate work at home assembly jobs, you will usually be sent supplies that you will need to complete the projects or you will have to purchase the supplies you need. The company will typically send you detailed instructions and patterns for you to follow. Once you complete the projects, you will send them to the company for review and payment.

Sadly, legitimate work at home assembly jobs are few and far between. In many cases, the company will have you send money for supplies, which they may or may not send. Then you spend the time to assemble the products and pay to send them back to the company where they will reject your work. With these work at home assembly jobs scams, you will lose your valuable time and money.

There are a number of ways that you can find out if your work at home assembly jobs are legitimate. Legitimate companies that offer work at home assembly jobs will often list their companies in the telephone directory. These same companies offering work at home assembly jobs will also have a real address, not just a PO Box or website. Also check with the work at home assembly jobs to see if they have retailers, distributors, or a customer base.

Another great way to check into the work at home assembly jobs you are considering is to check into regulatory agencies. For example, the Better Business Bureau has a number of affiliates that report on work at home assembly jobs, and you can investigate those companies on the Better Business Bureau website. You can even file a claim with the BBB is you have a concern. The Federal Trade Commission also offers the same type of information about work at home assembly jobs.

Read the rest of the article here: Work at Home Assembly Jobs .

Ergonomics – Product Design

What is Ergonomics and why should I know about it? Well this is a question to be asked to yourself if you are a services provider or a manufacturer.

Ergonomics is designing products, services or environment based on the human needs, behavior or usage. Following are the 5 important dimensions which better define Ergonomics –

1. Ease of Use – Products are designed to ensure that the user finds no or little difficulty in using and handling it.
2. Performance – Products are designed to alter their performance based on the user's need.
3. Aesthetics
4. Comfort
5. Safety

Although there are three broad types of Ergonomics which are accepted, the most important ones for manufacturers are – Physical and Cognitive Ergonomics.

Physical ergonomics is concerned with a human being's physical interaction with a particular product while using (consuming), handling or actually producing it. A manufacturer should design the process as well as the work in such a way that the worker is comfortable working there leading to increased productivity, low safety risk, better quality as well as reduction in production cost. This dimension of Physical ergonomics will benefit the Manufacturer. But the other benefit which will be derived would be a product which is easy to use and relates to the end user. Physical Ergonomics should not focus on just one factor but on these both. The manufacturer as well as the end user will benefit if Physical Ergonomics is applied efficiently. For the manufacturer this is a win – win situation as the company benefits from the benefits derived from process optimization as well as a good quality & easy to use product.

Cognitive Ergonomics is concerned with the emotional & motor responses of the worker as well as the user. This includes perception, motor responses, work load, stress etc. It is always advisable to apply both, the Physical and Cognitive Ergonomics instead of any one.

If you are a manufacturer and want to optimize your product and processes, you can either hire an employee or go for independent consulting firms. It is always advisable to get the consulting firms specializing in Ergonomics to do the job. This is because of the vast experience and expertise these companies carry across industries. Ergonomics being a highly specialized discipline, requires skill sets which are developed in a company or a person over a period of time. There are a few good Australian companies which provide such services to companies in Australia as well as across the globe. One such company is Design Industry which is a leading company in this field and has experience across industries such as banking, consumers, medicine, sports and many others. They have a team of highly creative as well as scientific members which is a rare combination but an ideal one for this job!

Flying With Your Baby Stroller – 10 Easy Tips For Boarding a Plane With Your Stroller

For many parents the idea of ​​traveling with an infant or toddler can be overwhelming to say the least. The amount of necessary items for the comfort and safety of a child must always be considered before you go. One of the most common dilemma's when flying with a child is whether or not to bring along your baby stroller.

A baby stroller can be a big help on a trip that will entail a good deal of walking or transporting a young child. However, be sure to remember to check out whenever or not your destination will be stroller-friendly along the way.

Here are 10 tips for flying with a baby stroller.

1. Make an educated decision about bringing a baby stroller. First check with your airline for their policies on bringing along a baby stroller. This may determine whether or not you will consider it a hassle or an asset for your trip.

2. Know the area you will be walking around. Consider the terrain, the width of the aisles and doorways as well as the amount of stairs you may be subject to climb. Pushing a stroller on a bumpy stone path or transporting it between subway rides may well be more difficult than simply carrying your child.

3. Before you even get to the airport be sure to properly label your stroller (on the handle bar or side bars) with a permanent marker or paper label. Write down your contact information, destination and flight information. You will be given a tag when you check your stroller but it is better to use BOTH to insure you get your stroller back once you have landed.

4. Have a Plan B for those times when you will need to leave your stroller outside or in the trunk. For babies that weigh no more than 20/30 lbs. keeping a baby carrier, sling or backpack is a good second option. For older children who can walk themselves, consider a harness to keep them tied to you in crowds and strange places. If you do not like the idea of ​​a harness for your child just be sure to start explaining to them a little every day about the importance of staying next to you or other caregivers when you are in a different place. They should understand who it is safe to talk to and give them something that has your contact information to wear when you are out in public.

OK Now you are ready to head to the airport!

5. It will be easiest to employ your stroller through the airport and just check it at the gate of the plane. Most airlines will let you stroll right on up to the gate of the plane before having to check it in.

6. If you would like to count your stroller with your luggage at check-in be sure to find out if you will be charged an extra fee. Some airlines do not count a baby stroller as a part of the luggage you are allowed to bring on and may have a rate that you do not want to pay.

7. If you are loading at the gate you will be asked to remove your child yourself and fold the stroller down to be stored. (It is nice to have a helping hand available to hold your child (ren) during this part.) Bringing duct tape is a good idea if your stroller is not compact enough to store in the overhead compartment on the plane. Simply tape the sides of the stroller shut tightly or wrap the stroller entirely around it's center. This will help to keep it closed while it is being loaded and unloaded into the cargo area therefore minimizing possible damage.

8. Your stroller will then be tagged and given a corresponding receipt that you will need to hold on to, in order to retrieve your stroller once you land.

9. Be sure to confirm with the attendant at the gate check where you will pick up your stroller upon landing. Most airlines will return your stroller at the gate as you exit but it could be sent along with the other luggage to the baggage claim.

10. Upon your exit present your receipt to claim your stroller or head to the baggage claim to retrieve it there. Remember to take advantage of your stroller and load it down with whatever baggage you can to alleviate the strain on your arms and shoulders.

It is important to note that if you are bringing a light umbrella stroller that can be folded compactly enough to fit into your overhead carrier (find out the dimensions from the airline) you will not need to gate check your stroller. Simply fold it and carry it to your seat. There are certain things you may want to consider before choosing between your lightweight, .standard stroller and your heavier, fancier stroller. Here is a list of pro's and con's for both.

Basic Umbrella Stroller- Between 10-13 lbs.

Pro's:

  • Compact, easy to fold and store.
  • Lightweight and easier to carry if you have to.
  • Can likely be stored in overhead of airplane so there is less opportunity for damage during the flight.
  • Cheaper to replace should you have any damage.
  • Easier fit through standard doorways, aisles, sidewalks and stairs.

Con's:

  • Not much storage to hold bags, or toys or anything acquired during an outing.
  • Not as easily maneuvered on rocky or difficult roads or terrain.

The BIG Stroller- The One With All the Fixin's!

Pro's:

  • Good amount of storage for diaper bags, purses and shopping bags.
  • Usually has a canopy and plenty of accessories to entertain and protect from the sun or rain.
  • Much easier to maneuver due to the larger wheels and design.
  • May be compatible with the car seat you are using or renting, therefore making a complete travel system.

Con's:

  • Takes up more space in trunks on sidewalks or buses.
  • Heavier to carry.
  • Needs to be stored with luggage on plane.

Based on this list you should pick the stroller that you feel will serve you and your child the best. There is nothing like having a stroller to help out when it comes to toting your children. A stroller is the next most important item to the crib when it comes to having a baby.

About Vent-Free Gas Logs And Fireplaces

What you should know before you buy vent-free gas logs. A ventless appliance of any kind will have an efficiency rating of 99.9% because they burn so clean. A vent-free gas log is fairly simple in the way they work. By deliberately mixing the gas going into the burner with oxygen from the room will create a complete combustion therefore resulting in an efficient clean burn. This technology dates back to 1980 when the first vent-free space heaters were injected. Since then manufactures have rolled this into gas logs, fireplaces and even fire pits with safety in mind all vent-free appliances are equipped with an ODS (oxygen depletion sensor) that will automatically turn the gas off if the pilot light does not since adequate oxygen in the air for the appliance to burn properly.

Being in the Hearth, Patio and Barbecue business for over 20 years I have sold thousands of vent-free gas logs and fireplaces and the largest complaint I get is that they are putting out too much heat and that the customer can only use their gas fire logs for a few hours before they run them out of the room. This is why you need to consult a professional before purchasing you gas fire logs and let them size the set for your room size. Going to the big box store and asking who ever in standing closest to the fireplace section does not count ask asking a professional about installing your gas log. Some customer complain about their vent-free logs putting off an odor and that goes back to burning clean. The only way a vent-free gas fire log will put off an odor is if they air in the room that it is breathing has an airborne odor such as household cleaning products, air fresheners or anything with an odor. If you remember that unit requires oxygen from the room air to burn clean and when the burner is consuming that room air with the airborne odor it will take that odor into the burner with the oxygen and burn that odor with the oxygen creating a foul odor that smells like kerosene to me.

Something else you should know if you own a vent-free gas log is about complete and incomplete combustion. A complete combustion is when the gas log is getting the proper gas and air mixture and the flames from the burner are not impinging upon the log sitting on top of the burner. An Incomplete combustion is when the burner is not getting the proper gas and air mixture due to clogged air intake or improper size gas line running to the gas log. And the most common incomplete combustion is when a log on top of the burner is misplaced and coming in contact with the flame. This will cause the incomplete combustion and with that will cause the gas log to soot. Make sure none of the logs are coming in contact with the flame and that they are all positioned as shown in the owner's manual to be safe.

A few simple things to look for when buying gas logs is to ask about the warranty. Make sure the warranty covers parts and labor for at least 3 years if not more. All of the fire logs we sell will last 10 plus years because they made in the USA with quality parts and tested before they leave the manufacture. You will also have a choice of control options such as manual control, remote ready and electronic ignition. The manual control means just that, you have one know that you turn from low, medium and high. Remote ready means that you can add a remote or wall switch but the unit does not come with one. With a remote ready you can add a simple on / off remote or a thermostat remote that will turn the log on and off at the temperature you have it set at. The newest trend in gas logs is the electronic ignition, this control will allow you to light the pilot light from the remote and also adjust the flame height from the remote. Also know that gas logs are made from ceramic refractory or ceramic fiber. The ceramic refractory is concrete based and the ceramic fiber is fiber based light weight. They both have their advantage because the fiber log set do not expand and contract due to heat and most of them have a little better detail. I like the concrete logs because the hold heat when you turn the burner off and they do not absorb household odors like the fiber logs. You can also wash a concrete log and you can not a fiber log.

Exactly What Are The Different Printmaking Techniques?

Printmaking is an art that has been created by transmitting an impression from one object right onto yet another two-dimensional surface area. Printmaking is among the oldest and most basic of artistic representations.

It began ever since the time of the ancient Chinese and from Dürer, artists have used and made techniques of recreating images on paper. These fine art print methods have grown as well as continued to evolve as time passes. Printmaking methods fall into 4 categories. 1) Relief – Woodcut, Linocut as well as some collographs; 2) Intaglio – Etching, Drypoint, Mezzotint as well as Aquatint; 3) Serigraphy – Silkscreen; 4) Planographic – Lithography.

Listed under "Traditional Printmaking", the following print types are classified as: Collagraph, Drypoint, Etching, Lino, Lithograph, Monotype, Silk Screen, Woodblock.

Collagraph – is actually a print obtained from a collection of materials that have been glued or adhered to a supporting surface. They can be basic or very rich in texture. A few might likewise classify prints done with a combination of print types as being a collagraph. These mixture prints can at times be categorized as monotype as well.

Drypoint – Both this and etching could come under a more expansive heading of intaglio printmaking. Intaglio prints all have the graphic being printed below the surface of the plate. With drypoint, the lines as well as tones will be hand-scratched right into the surface area of ​​the plate with the lines as well as burr holding the ink. In most cases, the traditional surface to do this on will be metal. Zinc as well as copper happened to be two of the most frequent metals utilized.

Engraving as well as mezzotint can likewise be included in this classification probably since they both of them are dry methods. Engraving is crispier and cleaner than drypoint. Mezzotint requires the whole surface of the plate having a fine even texture put into it. The artist then scrapes and burns the surface to make varying degrees of smooth surface areas which will lead to finer shades when printed.

Etching – Yet another print type whichought to be under the leader heading of intaglio printmaking. Acid as well as acid resistant grounds are used to create the graphic on the plate for this printingmaking technique.

Lino – These are relief prints achieved from a plate which has had the image cut or gouged into it and then the elevated surface area is inked with the cut image being the white or lighter regions of the print.

Lithograph – this print form is based upon the concept that grease as well as water do not mix. The graphic is produced with materials which have an affinity to oil. Special litho pens, crayons, wax crayons as well as liquid tusche are some of the things that could have been utilized to produce the oily graphic on the surface. The stone or metal with the graphic on it is then sponged down as well as inked. The ink sticks to the greasy graphic and is repelled by the damp areas with no image in it. The print is then taken.

Silk Screen – This makes use of stencils of a single form or yet another with a screen in which the ink is forced through the stencil to show the image on the printed surface. Stencils could be cut or created with emulsions.

Woodblock – As with lino prints, these are typically created with lines being cut or gouged out of the surface. These mark creates the white or light parts once the plate is inked on the raised surface and then printed. Reduction prints are a procedure where multiple layers are printed on top of one another with more cutting into the surface occurring between registrations.

Adobe Flash Player: A Risk To Privacy and Security

Adobe Flash Player: a greater risk to privacy and security than you may realize

Do you know that if you have Adobe's Flash Players plugin installed on your web browser that your internet activity and history is potentially being tracked and used without your knowledge or permission? Just managing your web browser's tracking cookie through your web browser does not prevent your internet browsing activity, and its history, from being tracked. Additionally, just keeping your computer current and fully patched with all of Microsoft's critical updates keeps your computer safe from hackers, think again. Even using an antivirus program, with the most current virus definitions current does not always prevent your computer and privacy from being at risk.

Recently I came across a news article that made my eye. It was a New York Times technology piece with the title " Code that tracks users' browsing prompts laws" (Vega, 2010). This article reports about the increasing number of consumers taking legal action against companies that track their web activity without the consumer's knowledge or permission. Adobe's Flash Player is the main conduit for capturing this tracking data. This is not the first time that Adobe's Flash player has created legal privacy issues. In 2008, Windows Secrets Newsletter published an article on Adobe's Flash cookie privacy issues. Recently they published another article called " Eliminate Flash-spawned" zombie "cookies" following up on the same issue (Leonhard, 2010). Adobe has done little to resolve this issue. These law suits are directed at Adobe and other companies that collect and sell information about your web browsing activity without your knowledge or permission. Another ominous contention is that some companies are surreptitiously using Flash cookies to glean information from your browser, even though you have your web browser set to reject tracking cookies.

How does this happen

Adobe's Flash Player browser plugin uses and stores Flash cookies on your computer, separate from your better known browser HTML cookies . Both types of cookies are used to store browsing and site preferences, along with your browsing history and tracking information. Flash cookies , like your web browser cookies, are small bits of data saved by the websites you visit. These websites use these cookies to store website settings and info (like your name, preferences, Flash game scores, etc.), to track website behavior, and to target you for specific advertisements. They can also create what is known as persistent identification element to uniquely identify you and track what websites you have visited.

Flash cookies are not managed through your web browser's cookie settings. This same Flash cookies storage area can also be used to store a copy of your browser's cookies, allowing Adobe's Flash to recreate cookies that have been previously deleted from your browser, ie spawned 'zombie' cookies.

What to do to protect yourself

Adobe does not make it easy for users to manage Flash cookies. By default, when Flash Player is installed, it automatically allows third parties to store and access your computer. To change these settings you need to access Flash's Global Setting Manager. The easiest, most straight forward way to get started is to open your web browser and copy the Adobe URL listed in my references (Ezinearticles does not allow me to place the link here). Or do a Google search on: "adobe flash player setting manager." The macromedia.com link should be the first and second items found.

This will take you to the Global Setting panel for Adobe's Flash Player (see Adobe Flash Player Global Setting Manager below). The image embedded on the web page is the actual management console, not a picture. The current version of this panel has eight panels or tabs. Each tab covers a different aspect of privacy and security. You may want to add this to your browser's Favorites for future reference.

Adobe Flash Player Global Settings Manager Global Privacy Settings

The first tab on the Global Setting Manager is for your computer's camera and microphone settings. You have the option of setting this as "Always deny …" or "Always ask …" The "Always ask …" option forces the Flash Player to ask for your permission before allowing a third-party to access your computer's camera and microphone. "Always deny …" does just that, it always denies permission to access your camera and microphone. You will not receive any notification that a third-party tried to access either your camera of microphone with this option.

Your current settings are not displayed. Clicking on "Always deny …" or "Always ask …" overrides any previous global setting made for this. This setting is for sites you have not already visited. I recommend that you select the "Always ask" option. This will allow you the option of using an interactive flash site, requiring the use of your camera and microphone. You will be prompted to confirm your selection.

You will always be prompted for your permission at any website requesting access to your camera and microphone.

Global Flash Cookie Storage Settings

The second tab of the Global Setting Manager controls how much disk space you will allow for new web sites (third-parties) to store information, Flash cookies, on your computer. By condemning all, you may prevent some websites from functioning correctly.

This panel determines the amount of disk space you will automatically allow third-parties to use for websites you have not already visited. Some websites may not function correctly if you do not allow some disk space storage. This is the total amount for each website. If a website needs or wants more you will receive a prompt to allow or disallow this additional space (see below). Your installed Flash Player must be version 8, or newer, to have the option of allowing or disallowing third-party flash content. If your flash version is older than version 9, you will not have the option to allow / disallow storage and sharing of common Flash components.

The suggested settings that work for me are shown above. The Allow third-party Flash, and Store common Flash, are needed by a lot of sites to allow them to function correctly.

Global Security Settings

The third tab is the Global Security Settings panel. This panel controls how Shockwave Flash (SWF) and Flash Video (FLV) are handled. The problem with these types of files is that they can contain applets or computer scripts that can be used to collect and share information about you without your knowledge or permission. Both SWF and FLV files can be embedded on web pages. These files can and do exchange audio, video, and data using Macromedia's Real Time Messaging Protocol. It is possible for SWF or FLV content stored locally on your computer to communicate with the Internet without your knowledge of permission.

I recommend setting this to "Always ask." If a website needs to store Flash cookies on your computer, you will be prompted for permission. By being prompted, you will be aware of the website's tracking activity.

Global Flash Update Notification Setting

The fourth tab is the Global Notification Settings panel. This is where you set how often flash checks for updates. I recommend enabling this feature and having Flash check for updates at least every seven days. I strongly recommended that Flash updates be installed as soon as possible for security reasons. By keeping your Flash Player updated, you make the malicious code writers' job just a little harder. The security vulnerabilities for Flash Player plugins are very well-known.

After installing any Flash updates you should validate that your privacy and security settings have not changed. With previous Flash updates, the settings within the Flash manager have reverted back to default, ie wide-open, settings.

Protected Content / License Settings

The fifth tab is the Protected Content Playback Settings panel. When you purchase or rent Flash "protected" content, license files are downloaded to your computer. Sometimes these files become corrupt. By resetting these files, new licenses can be downloaded. This option should only be used when protected Flash content is not playing correctly, and a technician has advised you to reset the licenses files. This will reset ALL license files stored on your computer; you are not able to select individual files.

If you click on the "Reset License Files" button you will be prompted to confirm or cancel your selection.

Website Privacy Settings

The sixth tab is the Website Privacy Settings panel. This is the list of websites you have granted permission to store data on your computer. This panel is where you can "Always ask," "Always allow," or "Always deny" access you your computer's camera and microphone.

The recommended setting is "Always ask" or "Always deny." You can edit these by highlighting the website and change the permission or delete the website. You can also remove all the websites from this list by selecting "Delete all sites." The settings on this panel override the default setting from the Global Privacy Settings panel for these particular websites.

If you choose to delete a website from this list you are prompted for confirmation.

Note: The list of websites displayed in this and the following panels are stored on your computer and displayed to allow you to view and change your local settings. Adobe claims that it has no access to this list, or to any of the information that the websites may have stored on your computer.

Website Storage Settings

The seventh tab is the Website Storage Settings panel. This lists all the websites that you have visited that use Flash content, and how much storage they are using on your computer. You can change the amount of storage you allow, delete individual websites, or all the websites. This panel overrides the Global Storage panel settings.

On a Windows 7 computer, the storage location for these files is: C: Usersuser_nameApplication DataMacromedia Flash Player in a folder called #SharedObjects or a subfolder of: macromedia.comsupportflashplayersys.

Note: Deleting the website using the Flash Global Settings Manager only removes the website's storage content; it does not remove the folder created for the website. An empty folder will remain on your computer.

By selecting a website and using the "Delete website" button, you can delete that website from the list of visited websites. This also removes all data that the website has stored from this storage area.

Peer-Assisted Networking Settings

The last tab is the Peer-Assisted Networking Settings panel. This is where you allow or disallow users who are playing the same content to share your bandwidth. If you are not on a broadband internet connection, you never want to use this option. When in use, this option increases network traffic on your internet connection and to your computer.

It is recommended that you disable this option. This will not prevent Flash from working.

Other Notes and Considerations

The current versions of Internet Explorer 8 and Firefox version 3.6 share the same Flash settings. Changing or updating Flash through this console makes the changes for both. To verify this, validate the Flash Management console from within each web browser you use.

After installing any Flash updates you should validate that your privacy and security settings have not changed. With previous Flash updates, the settings within the Flash manager have reverted back to default, ie wide-open, settings.

On a Windows 7 computer, you can manually manage Flash cookies by navigating to: C: Usersuser_nameApplication DataMacromedia Flash Player in a subfolder located at # SharedObjectsnonsensical-filename and macromedia.comsupportflashplayersys. Deleting the website using the Flash Global Settings Manager only removes the website's storage content; it does not remove the folder created for the website. An empty folder will remain on your computer in the C: Usersuser_nameApplication DataMacromedia Flash Playermacromedia.comsupportflashplayersys folder. The Application Data folder is a hidden systems folder. You will have to have hidden directories visible using the "Show hidden files, folders, and drives" option under the Fold Folder View option. You may also need systems permission to actually view and navigate these directories on a Windows 7 computer.

Instead of doing this manually, you can also use a free utility like Flash Cookie Cleaner 1.0, produced by ConsumerSoft (www.customer.com). This product will clean up and eliminate unwanted and unneeded Flash cookies in both the #SharedObjects and macromedia.com subfolders. This is a much simpler and more efficient way to clean up Flash cookies. You can download this free program from: http://www.flashcookiecleaner.com/ . This utility is free of spyware, adware, viruses, and other malicious programs. Download and save this file to your desktop and run it from there. This is a stand-along program that does not install itself on your computer.

References

Adobe – Flash Player: Help. (nd). Adobe. http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager02.html

ConsumerSoft – Freeware Products. (nd). ConsumerSoft.

Leonhard, W. (2010, August 5.). Eliminate Flash-spawned "zombie" cookies. Windows Secrets.

Vega, T. (2010, September 20.) Code that tracks users' browsing prompts lawsuits. The New York Times.

To request a pdf of the article with screenshot shot please visit the Friend Consulting web site and send an email from there with the Title: Adobe Insecurity.