Tips to Fix Vacuum Pump Problem

You might encounter problem with your vacuum pump and need some help to fix the problem. In this article, I am going to show you how to fix the problem. There are actually common problems that you might encounter. The problems are:

1. Noises

If your pump is very noisy and the sounds you hear are not the typical sounds of your pump. You have to check whether there is anything trapped on the pump. The cause of noise can be the overload water and also very high horsepower. The noise can also be caused by bearing failure.

2. Leaking

The most common problem is leaking. You have to identify where the exact position of the leak is. If it is possible, you need to find out the quantity of the leakage.

3. Vibration

Vibration is another major cause of the problem. You have to check the pipes and also separators in order to know which part is the cause of vibration. You might also find that the alignment and tension of V-belt or the coupling is the main cause of the vibration.

4. Stop Working

If you have this problem, you have to check the power supply first. Make sure that it is properly connected to the power source. If you find that nothing goes wrong with the electricity supply, you have to check whether there is electrical failure of the system. That can cause the system fail to start.

Unless you do not know what to do, you have to contact the service provider to repair it. You can also ask anyone who has the capability to fix the pump properly. You can also learn from that person how to fix the problem if there is any similar problem in the future. By knowing how to fix it properly, you will be able to get knowledge on how to fix vacuum pump. Make sure that the problem is solved before the service provider leaves.