Talking Dirty – The Lost Art Form

When things are getting hot and heavy in the bedroom, dirty talk can make things even hotter and heavier. It’s hard to do it if you’re not used to it. Maybe your partner likes it, but you don’t have much experience with it. If you’ve grown up in a religious or a conservative household, you might find it hard to get yourself to utter some of the more sexual thoughts that are in your head. It’s OK to let it out, and it can be quite therapeutic, not to mention arousing. Here’s some tips to get you comfortable with it:

Tell your partner what you want to do to them. You’re human so you have lots of sexual thoughts every day. You might have an image in your head of a particular move or position that you want to try. Start by telling your partner what you have in mind. You could say something along the lines of “I want to put your head over here, and you’re legs over there, and…” Don’t be afraid to be graphic. You’ll be surprised that your partner will follow this exercise in imagination.

Tell them what you want them to do to you. Almost better than telling your partner the things you want to do to them is letting them know what you want done. You don’t have to wait for your partner to ask what you like. Let them know. Do it in a seductive and sultry manner and you won’t look selfish, you’ll look suggestive!

Don’t get too carried away. You should know your partner well enough to know what they’ll consider sexy and what they’ll consider sleazy or scary. Be sure to know your limits. It’s OK to test them every once in a while, but if you don’t think your partner is quite feeling it anymore, tone it down a bit. Some people

Take it seriously. If you are grinning and giggling like a school girl you’ll take away from the effect. Don’t play around with it, get into character and show your partner that you have a nasty side to you.

If they’re into it they’ll love it, and if they’re not, at least now you know. If you try it out and they don’t like it, just tell them you read about it in the latest issue of Cosmo and you won’t do it again. If you really like it but they don’t like it, you might not be compatible as partners. If you give it an honest try, and you avoid going over the top, most reasonable partners should be game to go along with it. They might need to warm up to it a bit, so don’t break it out until the time is right.

Unique Wooden Spiral Staircases

Do you like to stand out in a crowd? Do you like to make a statement with just about everything you do including your home decor? If so, a unique wooden spiral staircase is the perfect solution for you.

Unique wooden spiral staircases come only in the finest woods. You can choose which finish you want on your staircase so you can match up the color with your baseboards, cabinets, doors, etc. When you complete installing the staircase your home will look as if the spiral staircase was built right into it from the beginning.

You will be very happy with the customer service you receive. The company that you speak with should have only the utmost professional and friendly help available. Forty years plus service given to the public is a monumental achievement in a business. It will not only please you, but give you trust and confidence knowing that the company you have chosen has been in business a long time in such a specialty.

You can easily request a quote once you fill out the forms. You will need to give the measurements of the staircase, the style you are interested in, the type of wood you would like your spiral staircase to be made out of, the railing style, the baluster style in addition to your name, address and phone number.

Once you decide on having the kit shipped to you, you will have peace of mind knowing you can build it yourself. The staircase is manufactured at a custom wood shop, put together by a professional staff and then taken apart to be shipped to you. By doing this, you know that each part has been tested to assure you it will fit together easily and that no pieces are missing when you are assembling the unique kit of your choice.

You will be the envy of all your family members, friends, co-workers and neighbors with your gorgeous staircase. Not many people have a wooden spiral staircase in their home, which means you will have an added touch of elegance while increasing the value of your home.

Not only can you have a unique wooden spiral staircase in your home, but you can also add one outside. You can easily attach a staircase to your wooden deck. Show the world your unique and sophisticated taste. Think of the fun you will have outdoors as a family enjoying your unique staircase. Picnics, pool parties, relaxing in the hammock or outdoor furniture just became a little bit more elegant while using and admiring the outdoor staircase. Enjoy cooking out on the grill and hosting parties on your new elegant deck. If you are cooking in the evening and planning on relaxing into the dark hours, you can decorate your deck and staircase with strands of lights to add to the ambiance.

You do not have to be lost in a crowd when it comes to your own home. You are a unique individual and you deserve to have your own unique sense of style in your home decor.

Stairway Lifts For Residential and Commercial Use

Stairway lifts designed for residential and commercial use help physically challenged and aged individuals by providing safe and convenient floor to floor access. By using stairway lifts it is possible to provide your loved ones with freedom of mobility and an enhanced lifestyle.

Permits Easy and Comfortable Access to Various Floors

In order to facilitate easy and smooth access between the floors of your home or office, premium models of residential and commercial stairway lifts are offered. Stair lift models appropriate for straight and curved stairways can be bought. Therefore structural configurations of the stairways are not necessary. In addition, it is possible to mount these stair lifts on the left or right side of your stairway, according to your convenience.

Ensures Safe and Risk-free Movement

The safety features integrated in the different stair lift models include swivel seat, padded armrest seat belts and safety brakes. Many of the models are also provided with space saving options such as folding facility. Therefore the lift can be kept folded when it is not used. This enables others to conveniently use the stairway.

Stair lifts are also provided with obstruction sensors. These obstruction sensors detect the obstacles blocking the path and stop the lift automatically. Hence any chance of the user getting injured and the lift getting damaged is avoided. AC and DC model stairway lifts are available. The DC model stair lifts are provided with battery backups, therefore it is possible to operate the lift even during power failures. DC models are therefore a little bit expensive. In addition, customization of panels and other elements based on your specific requirements is also possible.

Purchase a Durable and Reliable Product

At present there are several companies in the industry offering different models of stair lifts. Before purchasing stair lifts, it is important to acquire a better understanding about the different models, incorporated technology and price ranges. A good awareness about the manufacturers is also desirable. The eminent manufacturers of stairway lifts, offering superior and reliable products include ThyssenKrupp Access, Savaria Concord and Bruno. These companies make their products available through their dealers. These dealers will provide all the support required for the installation and maintenance of the lifts.

Scaffolding Accidents in the UK

We all know how hazardous shoddy scaffolding can be. Insecure bracing, poor materials, unsafe construction, lack of attention to safety board regulations – all lead to scaffolding accidents all over the UK.

An estimated 2.3 million construction workers, or 65 percent of the construction industry, work on scaffolds frequently. Protecting these workers from scaffold-related accidents may prevent some of the 4,500 injuries and 50 deaths every year, which cost employers £ 90 million in workdays lost. In a recent BLS study, 72 percent of workers injured in scaffold accidents attributed the accident either to the planking or support giving way, or to the employee slipping or being stuck by a falling object.

Base plates and mud sills are required on scaffolding. The surface where the mud sills are placed must be capable of keeping the scaffolding in place. Another essential component is the scaffold ties. After the first tie is attached properly, then identical ties should be attached safely. The height of these subsequent ties should not be more than twenty-six feet. You must also put ties at horizontal intervals, which does not exceed thirty feet, and all ties should be able to stand up to a push or pull of 2500 pounds of weight. Even with this additional ties may be necessary to ensure your safety on the scaffolding.

********************************************** *******************

If you need advice or would just like to speak to someone, please do not hesitate to give Claims Master Group a call on 08000 71 22 71.

The Personal Injury, Accident Claim, No Win No Fee, Scaffolding Accidents in the UK specialists.

Uses For Laminating Film

Laminating film products are used in almost all areas of business. Whether it's an office product or a shrink wrapped industrial piece of small equipment, lamination has become a very efficient way to protect and preserve whatever product it holds.

Types of Laminating Products

Laminating products can be purchased in a wide variety of sizes and films. Rolls and pouches are available for use with laminating machines. They are also available as hot or cold films. Shrink wrap and packaging for parts and equipment also use lamination products. Millions of retail products are packaged together and shrink wrapped to keep everything in tact. The plastic film or packaging is durable and strong so that it does not tear easily.

Industrial Uses of Lamination Products

Almost every industry that exists uses laminating film for one purpose or another. One of the main industrial uses is in the book publishing industry. Many hardback and soft cover books have laminated bindings to reserve the cover. This is especially popular in childrens books and soft cover readers that are intended to be used over and over again. Public library books are made with a mylar cover that protects the book bindings. Mylar is very similar to laminating plastic. Anything that needs to be protected or preserved can be enclosed in a lamination product.

Home Improvement Uses

Home improvement products make use of several types of lamination. Fifty percent of the items available in home improvement stores are packaged in some type of laminated plastic. Many times even the ends of two by four planks are covered in a shrink wrap to preserve the identification stamps and other information. It is also used in laminated counter tops. Lamination is a very versatile process that has protected and preserved products for many years.

Personal And Office Use

Identification cards, club membership cards and even some credit cards are preserved in some type of lamination product. You will find lamination in almost any product that is created for constant use. Signs and banners are also laminated for durability and improved presentation. Lamination is also used to protect the covers on presentation booklets and employee manuals.

To protect and preserve products whether it's a family heirloom or an odd machinery part, laminating film has millions of uses. No matter what types of items you or your company produce, protecting them with some type of lamination reduces the destruction and return of your products.

Bedroom Furniture – Lacquered Vs Waxed

If you still could not decide between a lacquered or waxed finish for your furniture, you'll do great looking into both the good and bad sides of the two in order to arrive at the better choice. But no hurry. You'll want to look into each single detail as you work on giving your wood a more welcome presence.

Giving your furniture a lacquered finish means it will be covered with a chemical called polyurethane to give it either a glossy or matte finish. Most people go for glossy, although it really does depend on a number of things, including the color you choose. The good thing about lacquer is it does not only give your furniture a nice and neat look. It also serves as a very strong protection by practically sealing the wood, including cracks and holes while leaving it air to breathe through the uncoated side.

For the most part, lacquer wood will keep damages at bay such such as liquid penetration, discoloration caused by hot cups put directly on the surface without the use of a coaster, and, of course, crayons. However, even as you've covered your wood with lacquer, it is still highly recommended to wipe off the liquid as soon as it contacts the furniture. That's because constant exposure to liquid tends to wash off the coat and makes the wood look dull and spotty. You can use a dry, soft cloth for wiping or damp cloth if the furniture gets really messy, but it's always best to let wood dry up as quickly as it can. Everyday cleaning can consist of dusting with a buff cloth and spraying with a standard polish.

On the other hand, a wax finish will not be as strong a protection for your oak bedroom furniture or any of the other solid wood varieties as lacquer is. The color is simply applied and a liquid wax is used for the final finishing. With wax, the wood is not sealed and can still be exposed to environmental elements that could affect its quality. Temperature and humidity extremes, for example, can openly affect the wood's quality as compared to a lacquered finish which practically seals in everything. A waxed finish will also still require regular waxing which depends on the amount of wear and tear it's subjected to. If you want to use colored wax, be aware that the effect will not be permanent and, in fact, is expected to fade or change over a short time, probably six to twelve months. Twice a year should be a good routine for waxing.

Despite its laborious reputation, though, wax boasts of its unique ability to keep wood moisturized and, its color, looking sharp as ever. Should you decide to go for this finish, you do have to religiously maintain it since wax pulls in dust and grease from anything. Leaving a wax-finished furniture unmaintained could have the wood cracking in places so you'll always want to keep it to a healthy polish all the time.

Is Olefin Carpeting Right For You?

So your old carpeting is finally beyond the point of rescue and you have decided to replace it. Now you are faced with an endless supply of choices to choose from. How can you decide which type of carpet to replace it with? You have to consider all of the different options and choose the one that fits your needs the best. One choice is Olefin or Polypropylene. This article will give you some information on this carpet and the advantages and disadvantages to using it.

Olefin carpet is the second most popular type of carpeting sold. Only Nylon carpet is more popular. It is used in both commercial and residential applications and is also commonly used to form artificial turf in sports fields.

One of the advantages of Olefin carpet is that it is almost always solution dyed. This means that the color is added when the fiber is made and it runs all the way through the fiber. This makes it impossible to bleach or fade Olefin. Another advantage of this fiber is that it does not absorb much moisture. Because of this, it does not stain easily and it can be easily cleaned. The last advantage of Olefin is that it is relatively inexpensive. It is one of the cheapest carpets available.

The disadvantage to Olefin carpets is that they will wear easily. It is a soft fiber that will crush and mat easily. Because of this, it is best used in loop construction carpets where the construction will give it added strength. Another negative of this type of fiber is that it attracts oil and grease like a magnet. Because of this, it is not uncommon to have an Olefin carpet with dark traffic areas. Dark areas that are not easily cleaned.

As you can see, there are numerous advantages and disadvantages to this carpet. If you do not need a carpet that will last forever and want one that does not stain easily and is reliably inexpensively this may be for you. if you however do not mind spending more money and want a carpet that will last longer, it is probably not your best choice for you.

Golf Tips – The Takeaway

Although there is some similarity between Croquet and Golf (both are played on grass, or should be anyway, both use balls, both are played by using some sort of club or mallet to move the balls, etc …) most people don ' t usually associate the two. However there is one way to refer the two sports in a way that may help you on the golf course with your takeaway.

Even if you've never played croquet it's easy to understand that if you want to roll the croquet balls accurately you must swing the mallet in such a way as to have the head very very close to the ground as you approach the ball and even for a few inches past the point of contacting the ball. This is why many, if not most, croquet shots are executed by swinging the mallet between your legs like a pendulum. It promotes an arc that is "flat" at the bottom.

When taking the club head away on a golf shot you need to do the same thing. That is, do not pull the club head up to quickly, but rather try to take it away slowly and smoothly so you flatten the "arc" at the bottom of the swing. This is especially important any time you are sitting off a tee with a driver or fairway wood.

To promote the feeling of a long, slow, flat arc on your tee shots imagine that your club (driver or fairway wood) is going to try to roll a croquet ball back from your golf ball. Your objective is not to hit the imaginary croquet ball a long way, but rather to start it rolling smoothly. This way you improve the motion of your takeaway which gives you a much better chance to return your club head on the correct swing plane to your golf ball.

Brick Fireplace Design

At present a lot of fireplaces are characterized by the burning of gas but long ago, masonry fireboxes that used brick mantels such as brick faces or wooden mantels were the preferred fireplace design by a lot of homeowners. Even at present, a lot still prefer to use classic brick because it looks good and it brings out a certain rustic feel that makes the room even more unique, ancient and elegant. The use of brick designs can darken a room and give out a unique style different from the brighter and open settings used by a lot of common places nowdays.

If you are building a home and you are considering a brickish style then you should consider also using stone mantels because these mantels will certainly add an everlasting beauty to your home. It should be understood that as early as possible, you should already set the pace of adding elegance and sophistication in every nook and cranny in your fireplace. The fireplace is center stage, it is the star in the show and it is the main attraction in any house. When brick material is preferred to be used, then you should make sure that it suits its environment completely. Make sure that the rustic air it exudes does not get lost in the sea of ​​classy and modern décor around the room. It will defeat the entire purpose of using bricks as materials if it were to be that way.

If you live in an older or antique home and you already have a brick fireplace, then you might want to consider remodeling it to return the luster and beautify of the material used. You can add more beautiful details to make the fire fire place even more attractive and one-of-a-kind. The best thing about brick is the fact that giving an attractive dark feel, its rustic feel provides an even more warm and ancient air. The grace and elegance of the ancient times is present in each brick that is used to complete the design. Just be sure to remember that the mantel is the center point or area of ​​where most important social gatherings in the house take place.

Hot Under the Eaves – An Incendiary Roofing Repair

A recent roofing repair job led to more than what the property owner bargained for – and not in a feel-good bonus kind of way. The "Times-Georgian" recently reported that "a roofing repair 'hot spot' may have been the cause of a … fire that destroyed a building due to be reopened soon."

Just 45 minutes after roofing crews had wrapped up completion on the roof repair, the blaze reportedly broke out. What is a roof hot spot? It's is a section of the roof that contains moisture. The heat such a spot accumulates during the day is then released at night. Even when a hot spot does not flare into a full-fledged fire, the lost heat it contributes to a building can significantly impact the cost of heating and cooling for the property owner.

The pitfalls of a roof hot spot do not stop there, however. Roofing hot spots most typically are found when a new roof system is installed over an existing roof. Because the old roof is laden down with moisture content, the addition of the new roof causes the moisture to get trapped inside the structure. Over time, that new roof you spent thousands of dollars on begin to rot from the inside out. What's worse, it's a case of buyer beware, because even when you shell out extra dollars on a roof warranty, you'll receive no payout if your new roof system was installed over a moisture-laden existing roof.

How can you avoid all these expensive and sometimes dangerous side effects? Your best option is to hire a reputable roofing professional who will get the job done right. You can also request a thermal imaging scan of your existing roof. A heat spy thermal imaging camera can unforgettable hot spots easily and quickly. This scan should be performed on any core samples of your roof that have a history of leaking.

A core sample is taken when a small section of your roof is removed and examined for moisture content. Using infrared photography, a thermal scan can then detect any hot spots in your roof.

Hot spots also have a less insidious but just as irritating definition in the roofing industry. Most typically, they occur with tile roofs. The way in which the tiles are taken off the pallet on which they are delivered, the way in which they are installed on the roof and, most certainly, the way in which they are stacked on the roof can all contribute to hot spots. When several tiles of the same color are installed too close together, a layout hot spot can occur. While they will not cause your roof to burst into flame, if left undetected, they can mar the blended effect you've spent hard-earned money to achieve.

Whether it's the threat of physical conflagration, the potential for expensive overhauls or merely a cosmetic headache you're forced to end, a roofing hot spot is nothing to play fire with. For these reasons, it's important that your new roof be evaluated and installed by a professional roofer.

How to Care For Your Violin Bow

It is important to develop good habits when caring for your violin bow. A good and responsive bow makes a huge difference in the sound of your instrument. There are several key points to remember to properly maintain your bow. Most importantly, always loosen the hair when you are finished playing. This is done by turning the bow screw counter-clockwise. You should feel the stick relax back into it's original arch (camber). If the bow is left tightened for extended periods, the stick can lose its camber and can even warp. Furthermore, the hair can stretch out. If the hair stretches too much, you will not be able to tighten the bow to playing tension. It is vital to remember never to force a bow to tighten because it is possible to break the end end of the stick by forcing it. If you can not tighten the hair, you should take it to your violin shop for a possible rehair. Bows should be rehaired depending upon use and the condition of the hair. There is not one rule about how frequently to have a bow rehausted.

An additional key to caring for your bow is to remember never to touch the horsehair with your fingers, as dirt and oils can get on the hair that will cause it to lose its ability to accept rosin. In general, it is always a good idea to wash your hands before you play your instrument. Some peoples' hands tend to perspire profusely. Not only can the sweat remove the varnish from the stick, iit can also soil the hair at the frog. For those with sweaty hands, frequent hand washing is more than a recommendation – it is a must. When perspiration builds up around the frog of the bow, it can attract grime that can cause the frog to get stuck in position on the stick. When this happens, the frog will not move – even when the bow screw is turned to loosen the hair. If this happens, the frog should be taken off of the stick, using care not to allow the hair to become twisted. Then, the stick should be cleaned. If you find that your hand is "eating away" at the stick or the varnish, you can have your luthier apply a long leather to the handle of the stick to protect it. This is frequently done on fine bows to retain the makers' stamp from wear and tear.

The frog glides back and forth on the stick by a simple mechanism of a bow screw and an eyelet. The bow screw is usually made of steel and the eyelet is usually made of brass. The brass eyelet is a much more metal metal than the bow screw and can strip. If you find that you can not tighten or loosen your bow, chances are good that they eyelet has become beaten. On occasion, it is possible to carefully remove the frog from the stick and turn the eyelet one-half of a turn, in order to locate some remaining thread left that has not yet become stripped. Then, it is possible to reset the frog back on the stick and reset the bow screw. This does not always work, but it is worth a try.

On the stick near the frog is the thumb leather and winding. The thumb leather is there to protect the stick from the thumb and thumb nail. Over time, your thumb nail can wear through the leather and start carving into the stick. If your thumb leather is warn, you should have it replaced at your next rehair. This will help preserve the stick and value of your bow.

The head of the bow is very fragile and under a lot of tension. At the head, you will find a tip plate. The tip plate can be made of metal, plastic, ivory or mammoth and is there to protect the head of the bow. If your tip plate is not made of metal, it can break when bumped or can crack if the hair is not carefully inserted during a rehair. If it should crack or break, you should have it replaced immediately.

Using too much rosin is a common mistake made by many players. Rosin should be applied sparingly and only when needed. You should not see a white cloud of rosin come off the bow when you play. Once there is too much rosin in the hair, it is nearly impossible to get out. When you use too much rosin, it will build up on the strings and your sound can become very scratchy – since you are essentially playing with rosin on rosin. Also, rosin can build up on your instrument and damage the varnish over time. To avoid this, it is important to wipe off your instrument, strings and bow shaft with a clean soft cloth each time you finish playing. Microfiber cloths work great for this.

Tightening the bow too much when you play is another common mistake. There is no rule for how tight a bow should be as it depends on the strength and camber of the stick and is different for every bow. If your bow is too tight, you will have trouble controlling your bow and it can become too bouncy when an even sound is desired. You can test how tight to make your bow by playing long and even strokes. The hair should just barely clear the stick at the middle of the bow. If you see a big gap between the hair and the stick, then your bow is too tight. You can keep experimenting with hair tension until you find that you have good control over the bow.

When you have develop good habits you will find it very easy to maintain your bow. Occasionally, you should be able to do this without even thinking about it.

Learn About Ventless Gel Fireplaces

A gel ventless fireplace is an excellent way to improve the décor of all rooms in your home; you can even hang ventless gel fireplaces from the wall. This type of fireplace uses a specific gel-like fuel; similar to the fuel cans used at banquets to keep food warm. This fuel can actually mimic the sounds and smells of a natural wood combustion fireplace. If you are considering going the ventless fireplace route then the gel fueled units might be an excellent option.

Unlike gas fueled vent-free fireplaces installation of the gel units can be done by virtually anyone. The main fuel source is a gel substance that can burn anywhere from 3 to 10 hours depending on the size and composition. Many of the newer fuels by RealFlame can actually produce the crackling noise of a real wood burning fireplace; and even produce the smell of pine, oak or other wood burning smells. The downside to ventless gel fireplaces is the fact they are more of a decorating then a heating source. The BTUs produced are much lower than a traditional fireplace.

A gel fireplace can be installed almost anywhere, including on your wall! Some of the newest units on the market today are no bigger than a standard portrait picture and weight less than 10lbs. However, you can get traditional fireplace models that mimic the look of a standard fireplace; the choice is solely to what you look you are actually going for. A ventless gel fireplace will enhance the décor of any room in your household, even the bathroom!

Ventless gel fireplaces also come in almost any style or design you could imagine; from wood, to chrome to stone. Some manufactures even produce custom ventless gel fireplaces based on the need of the customer; meaning you can get an exact replica of your current décor outline. If you want the look and feel of a fireplace in your cottage without the cost and installation a ventless gel fireplace is the way to go! If you're ready to learn more continue reading below.

Bricks Are More Interesting Than You Think

Bricks may seem dull and mundane, but they have a history and come in all shapes and sizes…read on.

The first known bricks have been dated to about 7,500 BC and were made from sun dried mud in the Upper Tigris area of south eastern Turkey. Archeological evidence shows the first fired bricks were probably produced in the third millennium BC in the middle east. Mud bricks don’t stand up to tough weather conditions, so the development of fired bricks meant permanent buildings could be constructed in areas with high rainfall or cold or very hot weather. Bricks have the added advantage of being good insulators and storing heat during the day and releasing it slowly when the sun goes down.

By 1200 BC brick making was widespread – there is ample archeological evidence of their use across Europe and Asia and the Romans helped spread bricks across the Roman Empire.

Much later in the 18th and 19th centuries the development of transport networks and vehicles made the manufacture of building materials more centralized and industrialized. Up until then bricks, being heavy in bulk, tended to be made close to where they were used for construction. This industrialization of the process made shape and size more standardized as well. This made construction quicker and simpler for bricklayers, rather than using stones of various shapes and sizes, requiring “jigsaw skills”. Fast construction was vital during the industrial revolution, so the use of bricks became increasingly popular.

So what’s in a brick? Bricks are most commonly made from clay. Raw clay is mixed with sand (to reduce shrinkage). The mixture is ground and mixed with water before being pressed into steel moulds, using a hydraulic press. The bricks are then fired to 1,000 centigrade, which locks in their strength. Modern brick-making involves rail kilns, where bricks are put through a kiln on a conveyor belt, slowly moving through to achieve continuous production.

Of course not all bricks are the same. For instance some a redder, others more yellow or pale. The colour is influenced by the mineral content of the clay used. So red bricks have a high iron content while pale bricks have a higher lime content. Also the hotter the temperature when firing the bricks, the darker they will be. Modern, concrete bricks tend to be grey.

So what do bricklayers like in a brick? First of all, bricklaying is a manual job so it’s important that bricks can be picked up and handled easily in one hand, so that cement can be laid with a trowel with the other hand. This makes the job of bricklaying quicker. But there are other considerations, depending on the nature of the job. Brick colour, density, thermal qualities, fire resistance and size can all be relevant. Often large concrete blocks are used by bricklayers for internal, unseen work. As they are larger, not so many are required so with two bricklayers on the job a wall can go up quickly. Obviously with decorative or exposed brickwork the colour or even shape will be important to create the right effect.

Bricks began life as a step towards building stronger, more permanent buildings. But now bricklayers use them not only for buildings and walls but also for paving and pedestrian precincts – the modern equivalent of cobbles. Bricks are also used in industries requiring furnaces. The bricks used to build furnaces deal with regular, very high heats of 1,500 centigrade, for the production of glass and metals, so they need to be specially manufactured to be suitable for that sort of environment.

Bricks are everywhere but few people know their qualities, how they are made or where they originate from. They have been around for millennia, and so have the bricklayers who lay them. They are a strong, dependable building material that has changed very little for thousands of years and that will doubtless go on sheltering us for centuries to come.

Rustic Refined Mediterranean Luxury Interiors

Designing your home in Mediterranean rustic style brings to mind bright summer days, arched cusped doorways, rustic vintage wooden furniture, rough patinas and imperfect neutral colors. Old wrought iron is used throughout the home. A beautiful old teak balcony railing accents the unfinished wooden ceiling beams. A boldly beautiful statement that is repeated in the fireplace mantel which is made from reclaimed old antique doors and arches, studded with iron medallions.

Built-in niches and alcoves are resplendent with the heavy white textured wall finish. A carved whitewashed rustic arched mirror brings in depth to the room. A cozy oxcart daybed with scattered pillows peeks out from beyond the formal room, and on top of the fireplace sits an eclectic piece of art in earthy colors.

Arches and columns are found throughout the house, cusped doorways, beautiful dark wood carved accent doors and windows, mantles that display treasures from your travels. The antique triple arched architectural veranda accents the view to the courtyard where sits a beautiful three tiered fountain. An antique door in dark teak and gorgeous carved detail is seen with climbing ivy and moss giving the soft warmth of aged wood and old bygone days. Sun soaked doors and the resplendent rustic architecture brings in the classic ambiance of Tuscany. Unpretentious colors and natural fabrics like handloom cotton bed throws and silk curtains accent the flavor. Bold designs and patterns complement the design, be it modern contemporary or traditional style.

Earthy red tile contrasts with the deep ochre patina of rustic old door cabinets that store your china. The doors are hand carved with old traditional designs and have seen several shades of color as the years go by, the beauty of worn patina and sun bleached doors is indescribable. Warm earthy tones and natural fabrics, cotton patchwork toss pillow and sheer curtains add to the romance of dark woods and burnished hardware. Mosaic tile credenza with wrought iron facade in distressed blue emboldens the spirit of Mediterranean decor.

In the warm desert climate limestone washed rustic white doors and furniture was used to keep the interiors cool and relaxed. And then the color of the oceans and seas, aqua blue, teals and turquoise act as contrast to the white and break up the uniformity. Distressed blue consoles and cabinets, old handmade turquoise armoires take a pivotal role in Mediterranean interiors. Old antique patterns and handcrafted in the old traditional methods the sideboard with the iron straps works as a media console.

A statement in rustic refined contemporary elegance Mediterranean style interiors are always trending.

Compassion and Detachment

Compassion is a key skill of a bodhisattva, but the bodhisattva's compassion comes from a place of true detachment. We can compare the actions of the enlightened ones to a person who is trying to save a drowning person. Only the expert swimmers can do it and the first thing that they teach you as a life guard is that you have to hold the person at the neck and securely bring him to the shore because that person's first tendency is to cling to you and if you allow it, then there is a great possibility of both of you drowning. If the one who is doing the rescue is on a boat, that person throws a raft but does not go with the raft. They throw the raft and it is tugged peacefully to the shore. These are special situations, but how do we deal with the every day task of trying to be of help to someone who is a part of your life when they are in anguish over a loss be it a loved one or a means of living?

Compassion in a true sense does not entitle sympathy or empathy. It is becoming solid like a rock, allowing the other person to sit on it until he or she decides to move on. No matter what we do or say which we think will make the other feel better can not compare to allowing the person to make the decisions on their own. If a person is hungry, he or she has to make the decision to eat or not. After the decision is made, that person actually has to eat the food to alleviate the hunger. The same is true of every emotion. It is so much easier for us to offer solutions as that is our first impulse. When we do then we become part of that person's drama. We think that we are helping the other person when we do so and our egos become inflated with the thought that we helped someone but that is a conditioned reflex. Our egos want the "Thank you for helping me" part. It makes us happy because we "helped" another person.

We can not really help another human being, just as we can not really "teach" another person. We can show them the means to find their way but we can not really point to it. It is much harder to empower another human being that it is to offer food, money, advise of all sorts. When situations arise, we can simply listen and let be. No judgments necessary.